| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <asm/io.h> |
| #include <asm/delay.h> |
| #include <asm/adc.h> |
| #include <mach/hp6xx.h> |
| |
| #define MODNAME "hp680_ts_input" |
| |
| #define HP680_TS_ABS_X_MIN 40 |
| #define HP680_TS_ABS_X_MAX 950 |
| #define HP680_TS_ABS_Y_MIN 80 |
| #define HP680_TS_ABS_Y_MAX 910 |
| |
| #define PHDR 0xa400012e |
| #define SCPDR 0xa4000136 |
| |
| static void do_softint(struct work_struct *work); |
| |
| static struct input_dev *hp680_ts_dev; |
| static DECLARE_DELAYED_WORK(work, do_softint); |
| |
| static void do_softint(struct work_struct *work) |
| { |
| int absx = 0, absy = 0; |
| u8 scpdr; |
| int touched = 0; |
| |
| if (__raw_readb(PHDR) & PHDR_TS_PEN_DOWN) { |
| scpdr = __raw_readb(SCPDR); |
| scpdr |= SCPDR_TS_SCAN_ENABLE; |
| scpdr &= ~SCPDR_TS_SCAN_Y; |
| __raw_writeb(scpdr, SCPDR); |
| udelay(30); |
| |
| absy = adc_single(ADC_CHANNEL_TS_Y); |
| |
| scpdr = __raw_readb(SCPDR); |
| scpdr |= SCPDR_TS_SCAN_Y; |
| scpdr &= ~SCPDR_TS_SCAN_X; |
| __raw_writeb(scpdr, SCPDR); |
| udelay(30); |
| |
| absx = adc_single(ADC_CHANNEL_TS_X); |
| |
| scpdr = __raw_readb(SCPDR); |
| scpdr |= SCPDR_TS_SCAN_X; |
| scpdr &= ~SCPDR_TS_SCAN_ENABLE; |
| __raw_writeb(scpdr, SCPDR); |
| udelay(100); |
| touched = __raw_readb(PHDR) & PHDR_TS_PEN_DOWN; |
| } |
| |
| if (touched) { |
| input_report_key(hp680_ts_dev, BTN_TOUCH, 1); |
| input_report_abs(hp680_ts_dev, ABS_X, absx); |
| input_report_abs(hp680_ts_dev, ABS_Y, absy); |
| } else { |
| input_report_key(hp680_ts_dev, BTN_TOUCH, 0); |
| } |
| |
| input_sync(hp680_ts_dev); |
| enable_irq(HP680_TS_IRQ); |
| } |
| |
| static irqreturn_t hp680_ts_interrupt(int irq, void *dev) |
| { |
| disable_irq_nosync(irq); |
| schedule_delayed_work(&work, HZ / 20); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __init hp680_ts_init(void) |
| { |
| int err; |
| |
| hp680_ts_dev = input_allocate_device(); |
| if (!hp680_ts_dev) |
| return -ENOMEM; |
| |
| hp680_ts_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); |
| hp680_ts_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); |
| |
| input_set_abs_params(hp680_ts_dev, ABS_X, |
| HP680_TS_ABS_X_MIN, HP680_TS_ABS_X_MAX, 0, 0); |
| input_set_abs_params(hp680_ts_dev, ABS_Y, |
| HP680_TS_ABS_Y_MIN, HP680_TS_ABS_Y_MAX, 0, 0); |
| |
| hp680_ts_dev->name = "HP Jornada touchscreen"; |
| hp680_ts_dev->phys = "hp680_ts/input0"; |
| |
| if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, |
| IRQF_DISABLED, MODNAME, 0) < 0) { |
| printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", |
| HP680_TS_IRQ); |
| err = -EBUSY; |
| goto fail1; |
| } |
| |
| err = input_register_device(hp680_ts_dev); |
| if (err) |
| goto fail2; |
| |
| return 0; |
| |
| fail2: free_irq(HP680_TS_IRQ, NULL); |
| cancel_delayed_work_sync(&work); |
| fail1: input_free_device(hp680_ts_dev); |
| return err; |
| } |
| |
| static void __exit hp680_ts_exit(void) |
| { |
| free_irq(HP680_TS_IRQ, NULL); |
| cancel_delayed_work_sync(&work); |
| input_unregister_device(hp680_ts_dev); |
| } |
| |
| module_init(hp680_ts_init); |
| module_exit(hp680_ts_exit); |
| |
| MODULE_AUTHOR("Andriy Skulysh, askulysh@image.kiev.ua"); |
| MODULE_DESCRIPTION("HP Jornada 680 touchscreen driver"); |
| MODULE_LICENSE("GPL"); |