| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (C) 2014-2016 Freescale Semiconductor, Inc. |
| * Copyright 2016 NXP |
| * |
| */ |
| |
| #include <asm/cacheflush.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <soc/fsl/dpaa2-global.h> |
| |
| #include "qbman-portal.h" |
| |
| #define QMAN_REV_4000 0x04000000 |
| #define QMAN_REV_4100 0x04010000 |
| #define QMAN_REV_4101 0x04010001 |
| #define QMAN_REV_MASK 0xffff0000 |
| |
| /* All QBMan command and result structures use this "valid bit" encoding */ |
| #define QB_VALID_BIT ((u32)0x80) |
| |
| /* QBMan portal management command codes */ |
| #define QBMAN_MC_ACQUIRE 0x30 |
| #define QBMAN_WQCHAN_CONFIGURE 0x46 |
| |
| /* CINH register offsets */ |
| #define QBMAN_CINH_SWP_EQAR 0x8c0 |
| #define QBMAN_CINH_SWP_DQPI 0xa00 |
| #define QBMAN_CINH_SWP_DCAP 0xac0 |
| #define QBMAN_CINH_SWP_SDQCR 0xb00 |
| #define QBMAN_CINH_SWP_RAR 0xcc0 |
| #define QBMAN_CINH_SWP_ISR 0xe00 |
| #define QBMAN_CINH_SWP_IER 0xe40 |
| #define QBMAN_CINH_SWP_ISDR 0xe80 |
| #define QBMAN_CINH_SWP_IIR 0xec0 |
| |
| /* CENA register offsets */ |
| #define QBMAN_CENA_SWP_EQCR(n) (0x000 + ((u32)(n) << 6)) |
| #define QBMAN_CENA_SWP_DQRR(n) (0x200 + ((u32)(n) << 6)) |
| #define QBMAN_CENA_SWP_RCR(n) (0x400 + ((u32)(n) << 6)) |
| #define QBMAN_CENA_SWP_CR 0x600 |
| #define QBMAN_CENA_SWP_RR(vb) (0x700 + ((u32)(vb) >> 1)) |
| #define QBMAN_CENA_SWP_VDQCR 0x780 |
| |
| /* Reverse mapping of QBMAN_CENA_SWP_DQRR() */ |
| #define QBMAN_IDX_FROM_DQRR(p) (((unsigned long)(p) & 0x1ff) >> 6) |
| |
| /* Define token used to determine if response written to memory is valid */ |
| #define QMAN_DQ_TOKEN_VALID 1 |
| |
| /* SDQCR attribute codes */ |
| #define QB_SDQCR_FC_SHIFT 29 |
| #define QB_SDQCR_FC_MASK 0x1 |
| #define QB_SDQCR_DCT_SHIFT 24 |
| #define QB_SDQCR_DCT_MASK 0x3 |
| #define QB_SDQCR_TOK_SHIFT 16 |
| #define QB_SDQCR_TOK_MASK 0xff |
| #define QB_SDQCR_SRC_SHIFT 0 |
| #define QB_SDQCR_SRC_MASK 0xffff |
| |
| /* opaque token for static dequeues */ |
| #define QMAN_SDQCR_TOKEN 0xbb |
| |
| enum qbman_sdqcr_dct { |
| qbman_sdqcr_dct_null = 0, |
| qbman_sdqcr_dct_prio_ics, |
| qbman_sdqcr_dct_active_ics, |
| qbman_sdqcr_dct_active |
| }; |
| |
| enum qbman_sdqcr_fc { |
| qbman_sdqcr_fc_one = 0, |
| qbman_sdqcr_fc_up_to_3 = 1 |
| }; |
| |
| /* Portal Access */ |
| |
| static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset) |
| { |
| return readl_relaxed(p->addr_cinh + offset); |
| } |
| |
| static inline void qbman_write_register(struct qbman_swp *p, u32 offset, |
| u32 value) |
| { |
| writel_relaxed(value, p->addr_cinh + offset); |
| } |
| |
| static inline void *qbman_get_cmd(struct qbman_swp *p, u32 offset) |
| { |
| return p->addr_cena + offset; |
| } |
| |
| #define QBMAN_CINH_SWP_CFG 0xd00 |
| |
| #define SWP_CFG_DQRR_MF_SHIFT 20 |
| #define SWP_CFG_EST_SHIFT 16 |
| #define SWP_CFG_WN_SHIFT 14 |
| #define SWP_CFG_RPM_SHIFT 12 |
| #define SWP_CFG_DCM_SHIFT 10 |
| #define SWP_CFG_EPM_SHIFT 8 |
| #define SWP_CFG_SD_SHIFT 5 |
| #define SWP_CFG_SP_SHIFT 4 |
| #define SWP_CFG_SE_SHIFT 3 |
| #define SWP_CFG_DP_SHIFT 2 |
| #define SWP_CFG_DE_SHIFT 1 |
| #define SWP_CFG_EP_SHIFT 0 |
| |
| static inline u32 qbman_set_swp_cfg(u8 max_fill, u8 wn, u8 est, u8 rpm, u8 dcm, |
| u8 epm, int sd, int sp, int se, |
| int dp, int de, int ep) |
| { |
| return (max_fill << SWP_CFG_DQRR_MF_SHIFT | |
| est << SWP_CFG_EST_SHIFT | |
| wn << SWP_CFG_WN_SHIFT | |
| rpm << SWP_CFG_RPM_SHIFT | |
| dcm << SWP_CFG_DCM_SHIFT | |
| epm << SWP_CFG_EPM_SHIFT | |
| sd << SWP_CFG_SD_SHIFT | |
| sp << SWP_CFG_SP_SHIFT | |
| se << SWP_CFG_SE_SHIFT | |
| dp << SWP_CFG_DP_SHIFT | |
| de << SWP_CFG_DE_SHIFT | |
| ep << SWP_CFG_EP_SHIFT); |
| } |
| |
| /** |
| * qbman_swp_init() - Create a functional object representing the given |
| * QBMan portal descriptor. |
| * @d: the given qbman swp descriptor |
| * |
| * Return qbman_swp portal for success, NULL if the object cannot |
| * be created. |
| */ |
| struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d) |
| { |
| struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL); |
| u32 reg; |
| |
| if (!p) |
| return NULL; |
| p->desc = d; |
| p->mc.valid_bit = QB_VALID_BIT; |
| p->sdq = 0; |
| p->sdq |= qbman_sdqcr_dct_prio_ics << QB_SDQCR_DCT_SHIFT; |
| p->sdq |= qbman_sdqcr_fc_up_to_3 << QB_SDQCR_FC_SHIFT; |
| p->sdq |= QMAN_SDQCR_TOKEN << QB_SDQCR_TOK_SHIFT; |
| |
| atomic_set(&p->vdq.available, 1); |
| p->vdq.valid_bit = QB_VALID_BIT; |
| p->dqrr.next_idx = 0; |
| p->dqrr.valid_bit = QB_VALID_BIT; |
| |
| if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_4100) { |
| p->dqrr.dqrr_size = 4; |
| p->dqrr.reset_bug = 1; |
| } else { |
| p->dqrr.dqrr_size = 8; |
| p->dqrr.reset_bug = 0; |
| } |
| |
| p->addr_cena = d->cena_bar; |
| p->addr_cinh = d->cinh_bar; |
| |
| reg = qbman_set_swp_cfg(p->dqrr.dqrr_size, |
| 1, /* Writes Non-cacheable */ |
| 0, /* EQCR_CI stashing threshold */ |
| 3, /* RPM: Valid bit mode, RCR in array mode */ |
| 2, /* DCM: Discrete consumption ack mode */ |
| 3, /* EPM: Valid bit mode, EQCR in array mode */ |
| 1, /* mem stashing drop enable == TRUE */ |
| 1, /* mem stashing priority == TRUE */ |
| 1, /* mem stashing enable == TRUE */ |
| 1, /* dequeue stashing priority == TRUE */ |
| 0, /* dequeue stashing enable == FALSE */ |
| 0); /* EQCR_CI stashing priority == FALSE */ |
| |
| qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg); |
| reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG); |
| if (!reg) { |
| pr_err("qbman: the portal is not enabled!\n"); |
| kfree(p); |
| return NULL; |
| } |
| |
| /* |
| * SDQCR needs to be initialized to 0 when no channels are |
| * being dequeued from or else the QMan HW will indicate an |
| * error. The values that were calculated above will be |
| * applied when dequeues from a specific channel are enabled. |
| */ |
| qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0); |
| return p; |
| } |
| |
| /** |
| * qbman_swp_finish() - Create and destroy a functional object representing |
| * the given QBMan portal descriptor. |
| * @p: the qbman_swp object to be destroyed |
| */ |
| void qbman_swp_finish(struct qbman_swp *p) |
| { |
| kfree(p); |
| } |
| |
| /** |
| * qbman_swp_interrupt_read_status() |
| * @p: the given software portal |
| * |
| * Return the value in the SWP_ISR register. |
| */ |
| u32 qbman_swp_interrupt_read_status(struct qbman_swp *p) |
| { |
| return qbman_read_register(p, QBMAN_CINH_SWP_ISR); |
| } |
| |
| /** |
| * qbman_swp_interrupt_clear_status() |
| * @p: the given software portal |
| * @mask: The mask to clear in SWP_ISR register |
| */ |
| void qbman_swp_interrupt_clear_status(struct qbman_swp *p, u32 mask) |
| { |
| qbman_write_register(p, QBMAN_CINH_SWP_ISR, mask); |
| } |
| |
| /** |
| * qbman_swp_interrupt_get_trigger() - read interrupt enable register |
| * @p: the given software portal |
| * |
| * Return the value in the SWP_IER register. |
| */ |
| u32 qbman_swp_interrupt_get_trigger(struct qbman_swp *p) |
| { |
| return qbman_read_register(p, QBMAN_CINH_SWP_IER); |
| } |
| |
| /** |
| * qbman_swp_interrupt_set_trigger() - enable interrupts for a swp |
| * @p: the given software portal |
| * @mask: The mask of bits to enable in SWP_IER |
| */ |
| void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, u32 mask) |
| { |
| qbman_write_register(p, QBMAN_CINH_SWP_IER, mask); |
| } |
| |
| /** |
| * qbman_swp_interrupt_get_inhibit() - read interrupt mask register |
| * @p: the given software portal object |
| * |
| * Return the value in the SWP_IIR register. |
| */ |
| int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p) |
| { |
| return qbman_read_register(p, QBMAN_CINH_SWP_IIR); |
| } |
| |
| /** |
| * qbman_swp_interrupt_set_inhibit() - write interrupt mask register |
| * @p: the given software portal object |
| * @mask: The mask to set in SWP_IIR register |
| */ |
| void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit) |
| { |
| qbman_write_register(p, QBMAN_CINH_SWP_IIR, inhibit ? 0xffffffff : 0); |
| } |
| |
| /* |
| * Different management commands all use this common base layer of code to issue |
| * commands and poll for results. |
| */ |
| |
| /* |
| * Returns a pointer to where the caller should fill in their management command |
| * (caller should ignore the verb byte) |
| */ |
| void *qbman_swp_mc_start(struct qbman_swp *p) |
| { |
| return qbman_get_cmd(p, QBMAN_CENA_SWP_CR); |
| } |
| |
| /* |
| * Commits merges in the caller-supplied command verb (which should not include |
| * the valid-bit) and submits the command to hardware |
| */ |
| void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb) |
| { |
| u8 *v = cmd; |
| |
| dma_wmb(); |
| *v = cmd_verb | p->mc.valid_bit; |
| } |
| |
| /* |
| * Checks for a completed response (returns non-NULL if only if the response |
| * is complete). |
| */ |
| void *qbman_swp_mc_result(struct qbman_swp *p) |
| { |
| u32 *ret, verb; |
| |
| ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); |
| |
| /* Remove the valid-bit - command completed if the rest is non-zero */ |
| verb = ret[0] & ~QB_VALID_BIT; |
| if (!verb) |
| return NULL; |
| p->mc.valid_bit ^= QB_VALID_BIT; |
| return ret; |
| } |
| |
| #define QB_ENQUEUE_CMD_OPTIONS_SHIFT 0 |
| enum qb_enqueue_commands { |
| enqueue_empty = 0, |
| enqueue_response_always = 1, |
| enqueue_rejects_to_fq = 2 |
| }; |
| |
| #define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT 2 |
| #define QB_ENQUEUE_CMD_IRQ_ON_DISPATCH_SHIFT 3 |
| #define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT 4 |
| |
| /** |
| * qbman_eq_desc_clear() - Clear the contents of a descriptor to |
| * default/starting state. |
| */ |
| void qbman_eq_desc_clear(struct qbman_eq_desc *d) |
| { |
| memset(d, 0, sizeof(*d)); |
| } |
| |
| /** |
| * qbman_eq_desc_set_no_orp() - Set enqueue descriptor without orp |
| * @d: the enqueue descriptor. |
| * @response_success: 1 = enqueue with response always; 0 = enqueue with |
| * rejections returned on a FQ. |
| */ |
| void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success) |
| { |
| d->verb &= ~(1 << QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT); |
| if (respond_success) |
| d->verb |= enqueue_response_always; |
| else |
| d->verb |= enqueue_rejects_to_fq; |
| } |
| |
| /* |
| * Exactly one of the following descriptor "targets" should be set. (Calling any |
| * one of these will replace the effect of any prior call to one of these.) |
| * -enqueue to a frame queue |
| * -enqueue to a queuing destination |
| */ |
| |
| /** |
| * qbman_eq_desc_set_fq() - set the FQ for the enqueue command |
| * @d: the enqueue descriptor |
| * @fqid: the id of the frame queue to be enqueued |
| */ |
| void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid) |
| { |
| d->verb &= ~(1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT); |
| d->tgtid = cpu_to_le32(fqid); |
| } |
| |
| /** |
| * qbman_eq_desc_set_qd() - Set Queuing Destination for the enqueue command |
| * @d: the enqueue descriptor |
| * @qdid: the id of the queuing destination to be enqueued |
| * @qd_bin: the queuing destination bin |
| * @qd_prio: the queuing destination priority |
| */ |
| void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid, |
| u32 qd_bin, u32 qd_prio) |
| { |
| d->verb |= 1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT; |
| d->tgtid = cpu_to_le32(qdid); |
| d->qdbin = cpu_to_le16(qd_bin); |
| d->qpri = qd_prio; |
| } |
| |
| #define EQAR_IDX(eqar) ((eqar) & 0x7) |
| #define EQAR_VB(eqar) ((eqar) & 0x80) |
| #define EQAR_SUCCESS(eqar) ((eqar) & 0x100) |
| |
| /** |
| * qbman_swp_enqueue() - Issue an enqueue command |
| * @s: the software portal used for enqueue |
| * @d: the enqueue descriptor |
| * @fd: the frame descriptor to be enqueued |
| * |
| * Please note that 'fd' should only be NULL if the "action" of the |
| * descriptor is "orp_hole" or "orp_nesn". |
| * |
| * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready. |
| */ |
| int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d, |
| const struct dpaa2_fd *fd) |
| { |
| struct qbman_eq_desc *p; |
| u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR); |
| |
| if (!EQAR_SUCCESS(eqar)) |
| return -EBUSY; |
| |
| p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar))); |
| memcpy(&p->dca, &d->dca, 31); |
| memcpy(&p->fd, fd, sizeof(*fd)); |
| |
| /* Set the verb byte, have to substitute in the valid-bit */ |
| dma_wmb(); |
| p->verb = d->verb | EQAR_VB(eqar); |
| |
| return 0; |
| } |
| |
| /* Static (push) dequeue */ |
| |
| /** |
| * qbman_swp_push_get() - Get the push dequeue setup |
| * @p: the software portal object |
| * @channel_idx: the channel index to query |
| * @enabled: returned boolean to show whether the push dequeue is enabled |
| * for the given channel |
| */ |
| void qbman_swp_push_get(struct qbman_swp *s, u8 channel_idx, int *enabled) |
| { |
| u16 src = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK; |
| |
| WARN_ON(channel_idx > 15); |
| *enabled = src | (1 << channel_idx); |
| } |
| |
| /** |
| * qbman_swp_push_set() - Enable or disable push dequeue |
| * @p: the software portal object |
| * @channel_idx: the channel index (0 to 15) |
| * @enable: enable or disable push dequeue |
| */ |
| void qbman_swp_push_set(struct qbman_swp *s, u8 channel_idx, int enable) |
| { |
| u16 dqsrc; |
| |
| WARN_ON(channel_idx > 15); |
| if (enable) |
| s->sdq |= 1 << channel_idx; |
| else |
| s->sdq &= ~(1 << channel_idx); |
| |
| /* Read make the complete src map. If no channels are enabled |
| * the SDQCR must be 0 or else QMan will assert errors |
| */ |
| dqsrc = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK; |
| if (dqsrc != 0) |
| qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, s->sdq); |
| else |
| qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, 0); |
| } |
| |
| #define QB_VDQCR_VERB_DCT_SHIFT 0 |
| #define QB_VDQCR_VERB_DT_SHIFT 2 |
| #define QB_VDQCR_VERB_RLS_SHIFT 4 |
| #define QB_VDQCR_VERB_WAE_SHIFT 5 |
| |
| enum qb_pull_dt_e { |
| qb_pull_dt_channel, |
| qb_pull_dt_workqueue, |
| qb_pull_dt_framequeue |
| }; |
| |
| /** |
| * qbman_pull_desc_clear() - Clear the contents of a descriptor to |
| * default/starting state |
| * @d: the pull dequeue descriptor to be cleared |
| */ |
| void qbman_pull_desc_clear(struct qbman_pull_desc *d) |
| { |
| memset(d, 0, sizeof(*d)); |
| } |
| |
| /** |
| * qbman_pull_desc_set_storage()- Set the pull dequeue storage |
| * @d: the pull dequeue descriptor to be set |
| * @storage: the pointer of the memory to store the dequeue result |
| * @storage_phys: the physical address of the storage memory |
| * @stash: to indicate whether write allocate is enabled |
| * |
| * If not called, or if called with 'storage' as NULL, the result pull dequeues |
| * will produce results to DQRR. If 'storage' is non-NULL, then results are |
| * produced to the given memory location (using the DMA address which |
| * the caller provides in 'storage_phys'), and 'stash' controls whether or not |
| * those writes to main-memory express a cache-warming attribute. |
| */ |
| void qbman_pull_desc_set_storage(struct qbman_pull_desc *d, |
| struct dpaa2_dq *storage, |
| dma_addr_t storage_phys, |
| int stash) |
| { |
| /* save the virtual address */ |
| d->rsp_addr_virt = (u64)(uintptr_t)storage; |
| |
| if (!storage) { |
| d->verb &= ~(1 << QB_VDQCR_VERB_RLS_SHIFT); |
| return; |
| } |
| d->verb |= 1 << QB_VDQCR_VERB_RLS_SHIFT; |
| if (stash) |
| d->verb |= 1 << QB_VDQCR_VERB_WAE_SHIFT; |
| else |
| d->verb &= ~(1 << QB_VDQCR_VERB_WAE_SHIFT); |
| |
| d->rsp_addr = cpu_to_le64(storage_phys); |
| } |
| |
| /** |
| * qbman_pull_desc_set_numframes() - Set the number of frames to be dequeued |
| * @d: the pull dequeue descriptor to be set |
| * @numframes: number of frames to be set, must be between 1 and 16, inclusive |
| */ |
| void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes) |
| { |
| d->numf = numframes - 1; |
| } |
| |
| /* |
| * Exactly one of the following descriptor "actions" should be set. (Calling any |
| * one of these will replace the effect of any prior call to one of these.) |
| * - pull dequeue from the given frame queue (FQ) |
| * - pull dequeue from any FQ in the given work queue (WQ) |
| * - pull dequeue from any FQ in any WQ in the given channel |
| */ |
| |
| /** |
| * qbman_pull_desc_set_fq() - Set fqid from which the dequeue command dequeues |
| * @fqid: the frame queue index of the given FQ |
| */ |
| void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid) |
| { |
| d->verb |= 1 << QB_VDQCR_VERB_DCT_SHIFT; |
| d->verb |= qb_pull_dt_framequeue << QB_VDQCR_VERB_DT_SHIFT; |
| d->dq_src = cpu_to_le32(fqid); |
| } |
| |
| /** |
| * qbman_pull_desc_set_wq() - Set wqid from which the dequeue command dequeues |
| * @wqid: composed of channel id and wqid within the channel |
| * @dct: the dequeue command type |
| */ |
| void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid, |
| enum qbman_pull_type_e dct) |
| { |
| d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT; |
| d->verb |= qb_pull_dt_workqueue << QB_VDQCR_VERB_DT_SHIFT; |
| d->dq_src = cpu_to_le32(wqid); |
| } |
| |
| /** |
| * qbman_pull_desc_set_channel() - Set channelid from which the dequeue command |
| * dequeues |
| * @chid: the channel id to be dequeued |
| * @dct: the dequeue command type |
| */ |
| void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid, |
| enum qbman_pull_type_e dct) |
| { |
| d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT; |
| d->verb |= qb_pull_dt_channel << QB_VDQCR_VERB_DT_SHIFT; |
| d->dq_src = cpu_to_le32(chid); |
| } |
| |
| /** |
| * qbman_swp_pull() - Issue the pull dequeue command |
| * @s: the software portal object |
| * @d: the software portal descriptor which has been configured with |
| * the set of qbman_pull_desc_set_*() calls |
| * |
| * Return 0 for success, and -EBUSY if the software portal is not ready |
| * to do pull dequeue. |
| */ |
| int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d) |
| { |
| struct qbman_pull_desc *p; |
| |
| if (!atomic_dec_and_test(&s->vdq.available)) { |
| atomic_inc(&s->vdq.available); |
| return -EBUSY; |
| } |
| s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt; |
| p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR); |
| p->numf = d->numf; |
| p->tok = QMAN_DQ_TOKEN_VALID; |
| p->dq_src = d->dq_src; |
| p->rsp_addr = d->rsp_addr; |
| p->rsp_addr_virt = d->rsp_addr_virt; |
| dma_wmb(); |
| |
| /* Set the verb byte, have to substitute in the valid-bit */ |
| p->verb = d->verb | s->vdq.valid_bit; |
| s->vdq.valid_bit ^= QB_VALID_BIT; |
| |
| return 0; |
| } |
| |
| #define QMAN_DQRR_PI_MASK 0xf |
| |
| /** |
| * qbman_swp_dqrr_next() - Get an valid DQRR entry |
| * @s: the software portal object |
| * |
| * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry |
| * only once, so repeated calls can return a sequence of DQRR entries, without |
| * requiring they be consumed immediately or in any particular order. |
| */ |
| const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s) |
| { |
| u32 verb; |
| u32 response_verb; |
| u32 flags; |
| struct dpaa2_dq *p; |
| |
| /* Before using valid-bit to detect if something is there, we have to |
| * handle the case of the DQRR reset bug... |
| */ |
| if (unlikely(s->dqrr.reset_bug)) { |
| /* |
| * We pick up new entries by cache-inhibited producer index, |
| * which means that a non-coherent mapping would require us to |
| * invalidate and read *only* once that PI has indicated that |
| * there's an entry here. The first trip around the DQRR ring |
| * will be much less efficient than all subsequent trips around |
| * it... |
| */ |
| u8 pi = qbman_read_register(s, QBMAN_CINH_SWP_DQPI) & |
| QMAN_DQRR_PI_MASK; |
| |
| /* there are new entries if pi != next_idx */ |
| if (pi == s->dqrr.next_idx) |
| return NULL; |
| |
| /* |
| * if next_idx is/was the last ring index, and 'pi' is |
| * different, we can disable the workaround as all the ring |
| * entries have now been DMA'd to so valid-bit checking is |
| * repaired. Note: this logic needs to be based on next_idx |
| * (which increments one at a time), rather than on pi (which |
| * can burst and wrap-around between our snapshots of it). |
| */ |
| if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) { |
| pr_debug("next_idx=%d, pi=%d, clear reset bug\n", |
| s->dqrr.next_idx, pi); |
| s->dqrr.reset_bug = 0; |
| } |
| prefetch(qbman_get_cmd(s, |
| QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx))); |
| } |
| |
| p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); |
| verb = p->dq.verb; |
| |
| /* |
| * If the valid-bit isn't of the expected polarity, nothing there. Note, |
| * in the DQRR reset bug workaround, we shouldn't need to skip these |
| * check, because we've already determined that a new entry is available |
| * and we've invalidated the cacheline before reading it, so the |
| * valid-bit behaviour is repaired and should tell us what we already |
| * knew from reading PI. |
| */ |
| if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) { |
| prefetch(qbman_get_cmd(s, |
| QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx))); |
| return NULL; |
| } |
| /* |
| * There's something there. Move "next_idx" attention to the next ring |
| * entry (and prefetch it) before returning what we found. |
| */ |
| s->dqrr.next_idx++; |
| s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */ |
| if (!s->dqrr.next_idx) |
| s->dqrr.valid_bit ^= QB_VALID_BIT; |
| |
| /* |
| * If this is the final response to a volatile dequeue command |
| * indicate that the vdq is available |
| */ |
| flags = p->dq.stat; |
| response_verb = verb & QBMAN_RESULT_MASK; |
| if ((response_verb == QBMAN_RESULT_DQ) && |
| (flags & DPAA2_DQ_STAT_VOLATILE) && |
| (flags & DPAA2_DQ_STAT_EXPIRED)) |
| atomic_inc(&s->vdq.available); |
| |
| prefetch(qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx))); |
| |
| return p; |
| } |
| |
| /** |
| * qbman_swp_dqrr_consume() - Consume DQRR entries previously returned from |
| * qbman_swp_dqrr_next(). |
| * @s: the software portal object |
| * @dq: the DQRR entry to be consumed |
| */ |
| void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq) |
| { |
| qbman_write_register(s, QBMAN_CINH_SWP_DCAP, QBMAN_IDX_FROM_DQRR(dq)); |
| } |
| |
| /** |
| * qbman_result_has_new_result() - Check and get the dequeue response from the |
| * dq storage memory set in pull dequeue command |
| * @s: the software portal object |
| * @dq: the dequeue result read from the memory |
| * |
| * Return 1 for getting a valid dequeue result, or 0 for not getting a valid |
| * dequeue result. |
| * |
| * Only used for user-provided storage of dequeue results, not DQRR. For |
| * efficiency purposes, the driver will perform any required endianness |
| * conversion to ensure that the user's dequeue result storage is in host-endian |
| * format. As such, once the user has called qbman_result_has_new_result() and |
| * been returned a valid dequeue result, they should not call it again on |
| * the same memory location (except of course if another dequeue command has |
| * been executed to produce a new result to that location). |
| */ |
| int qbman_result_has_new_result(struct qbman_swp *s, const struct dpaa2_dq *dq) |
| { |
| if (dq->dq.tok != QMAN_DQ_TOKEN_VALID) |
| return 0; |
| |
| /* |
| * Set token to be 0 so we will detect change back to 1 |
| * next time the looping is traversed. Const is cast away here |
| * as we want users to treat the dequeue responses as read only. |
| */ |
| ((struct dpaa2_dq *)dq)->dq.tok = 0; |
| |
| /* |
| * Determine whether VDQCR is available based on whether the |
| * current result is sitting in the first storage location of |
| * the busy command. |
| */ |
| if (s->vdq.storage == dq) { |
| s->vdq.storage = NULL; |
| atomic_inc(&s->vdq.available); |
| } |
| |
| return 1; |
| } |
| |
| /** |
| * qbman_release_desc_clear() - Clear the contents of a descriptor to |
| * default/starting state. |
| */ |
| void qbman_release_desc_clear(struct qbman_release_desc *d) |
| { |
| memset(d, 0, sizeof(*d)); |
| d->verb = 1 << 5; /* Release Command Valid */ |
| } |
| |
| /** |
| * qbman_release_desc_set_bpid() - Set the ID of the buffer pool to release to |
| */ |
| void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid) |
| { |
| d->bpid = cpu_to_le16(bpid); |
| } |
| |
| /** |
| * qbman_release_desc_set_rcdi() - Determines whether or not the portal's RCDI |
| * interrupt source should be asserted after the release command is completed. |
| */ |
| void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable) |
| { |
| if (enable) |
| d->verb |= 1 << 6; |
| else |
| d->verb &= ~(1 << 6); |
| } |
| |
| #define RAR_IDX(rar) ((rar) & 0x7) |
| #define RAR_VB(rar) ((rar) & 0x80) |
| #define RAR_SUCCESS(rar) ((rar) & 0x100) |
| |
| /** |
| * qbman_swp_release() - Issue a buffer release command |
| * @s: the software portal object |
| * @d: the release descriptor |
| * @buffers: a pointer pointing to the buffer address to be released |
| * @num_buffers: number of buffers to be released, must be less than 8 |
| * |
| * Return 0 for success, -EBUSY if the release command ring is not ready. |
| */ |
| int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d, |
| const u64 *buffers, unsigned int num_buffers) |
| { |
| int i; |
| struct qbman_release_desc *p; |
| u32 rar; |
| |
| if (!num_buffers || (num_buffers > 7)) |
| return -EINVAL; |
| |
| rar = qbman_read_register(s, QBMAN_CINH_SWP_RAR); |
| if (!RAR_SUCCESS(rar)) |
| return -EBUSY; |
| |
| /* Start the release command */ |
| p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar))); |
| /* Copy the caller's buffer pointers to the command */ |
| for (i = 0; i < num_buffers; i++) |
| p->buf[i] = cpu_to_le64(buffers[i]); |
| p->bpid = d->bpid; |
| |
| /* |
| * Set the verb byte, have to substitute in the valid-bit and the number |
| * of buffers. |
| */ |
| dma_wmb(); |
| p->verb = d->verb | RAR_VB(rar) | num_buffers; |
| |
| return 0; |
| } |
| |
| struct qbman_acquire_desc { |
| u8 verb; |
| u8 reserved; |
| __le16 bpid; |
| u8 num; |
| u8 reserved2[59]; |
| }; |
| |
| struct qbman_acquire_rslt { |
| u8 verb; |
| u8 rslt; |
| __le16 reserved; |
| u8 num; |
| u8 reserved2[3]; |
| __le64 buf[7]; |
| }; |
| |
| /** |
| * qbman_swp_acquire() - Issue a buffer acquire command |
| * @s: the software portal object |
| * @bpid: the buffer pool index |
| * @buffers: a pointer pointing to the acquired buffer addresses |
| * @num_buffers: number of buffers to be acquired, must be less than 8 |
| * |
| * Return 0 for success, or negative error code if the acquire command |
| * fails. |
| */ |
| int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers, |
| unsigned int num_buffers) |
| { |
| struct qbman_acquire_desc *p; |
| struct qbman_acquire_rslt *r; |
| int i; |
| |
| if (!num_buffers || (num_buffers > 7)) |
| return -EINVAL; |
| |
| /* Start the management command */ |
| p = qbman_swp_mc_start(s); |
| |
| if (!p) |
| return -EBUSY; |
| |
| /* Encode the caller-provided attributes */ |
| p->bpid = cpu_to_le16(bpid); |
| p->num = num_buffers; |
| |
| /* Complete the management command */ |
| r = qbman_swp_mc_complete(s, p, QBMAN_MC_ACQUIRE); |
| if (unlikely(!r)) { |
| pr_err("qbman: acquire from BPID %d failed, no response\n", |
| bpid); |
| return -EIO; |
| } |
| |
| /* Decode the outcome */ |
| WARN_ON((r->verb & 0x7f) != QBMAN_MC_ACQUIRE); |
| |
| /* Determine success or failure */ |
| if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) { |
| pr_err("qbman: acquire from BPID 0x%x failed, code=0x%02x\n", |
| bpid, r->rslt); |
| return -EIO; |
| } |
| |
| WARN_ON(r->num > num_buffers); |
| |
| /* Copy the acquired buffers to the caller's array */ |
| for (i = 0; i < r->num; i++) |
| buffers[i] = le64_to_cpu(r->buf[i]); |
| |
| return (int)r->num; |
| } |
| |
| struct qbman_alt_fq_state_desc { |
| u8 verb; |
| u8 reserved[3]; |
| __le32 fqid; |
| u8 reserved2[56]; |
| }; |
| |
| struct qbman_alt_fq_state_rslt { |
| u8 verb; |
| u8 rslt; |
| u8 reserved[62]; |
| }; |
| |
| #define ALT_FQ_FQID_MASK 0x00FFFFFF |
| |
| int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid, |
| u8 alt_fq_verb) |
| { |
| struct qbman_alt_fq_state_desc *p; |
| struct qbman_alt_fq_state_rslt *r; |
| |
| /* Start the management command */ |
| p = qbman_swp_mc_start(s); |
| if (!p) |
| return -EBUSY; |
| |
| p->fqid = cpu_to_le32(fqid & ALT_FQ_FQID_MASK); |
| |
| /* Complete the management command */ |
| r = qbman_swp_mc_complete(s, p, alt_fq_verb); |
| if (unlikely(!r)) { |
| pr_err("qbman: mgmt cmd failed, no response (verb=0x%x)\n", |
| alt_fq_verb); |
| return -EIO; |
| } |
| |
| /* Decode the outcome */ |
| WARN_ON((r->verb & QBMAN_RESULT_MASK) != alt_fq_verb); |
| |
| /* Determine success or failure */ |
| if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) { |
| pr_err("qbman: ALT FQID %d failed: verb = 0x%08x code = 0x%02x\n", |
| fqid, r->verb, r->rslt); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| struct qbman_cdan_ctrl_desc { |
| u8 verb; |
| u8 reserved; |
| __le16 ch; |
| u8 we; |
| u8 ctrl; |
| __le16 reserved2; |
| __le64 cdan_ctx; |
| u8 reserved3[48]; |
| |
| }; |
| |
| struct qbman_cdan_ctrl_rslt { |
| u8 verb; |
| u8 rslt; |
| __le16 ch; |
| u8 reserved[60]; |
| }; |
| |
| int qbman_swp_CDAN_set(struct qbman_swp *s, u16 channelid, |
| u8 we_mask, u8 cdan_en, |
| u64 ctx) |
| { |
| struct qbman_cdan_ctrl_desc *p = NULL; |
| struct qbman_cdan_ctrl_rslt *r = NULL; |
| |
| /* Start the management command */ |
| p = qbman_swp_mc_start(s); |
| if (!p) |
| return -EBUSY; |
| |
| /* Encode the caller-provided attributes */ |
| p->ch = cpu_to_le16(channelid); |
| p->we = we_mask; |
| if (cdan_en) |
| p->ctrl = 1; |
| else |
| p->ctrl = 0; |
| p->cdan_ctx = cpu_to_le64(ctx); |
| |
| /* Complete the management command */ |
| r = qbman_swp_mc_complete(s, p, QBMAN_WQCHAN_CONFIGURE); |
| if (unlikely(!r)) { |
| pr_err("qbman: wqchan config failed, no response\n"); |
| return -EIO; |
| } |
| |
| WARN_ON((r->verb & 0x7f) != QBMAN_WQCHAN_CONFIGURE); |
| |
| /* Determine success or failure */ |
| if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) { |
| pr_err("qbman: CDAN cQID %d failed: code = 0x%02x\n", |
| channelid, r->rslt); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| #define QBMAN_RESPONSE_VERB_MASK 0x7f |
| #define QBMAN_FQ_QUERY_NP 0x45 |
| #define QBMAN_BP_QUERY 0x32 |
| |
| struct qbman_fq_query_desc { |
| u8 verb; |
| u8 reserved[3]; |
| __le32 fqid; |
| u8 reserved2[56]; |
| }; |
| |
| int qbman_fq_query_state(struct qbman_swp *s, u32 fqid, |
| struct qbman_fq_query_np_rslt *r) |
| { |
| struct qbman_fq_query_desc *p; |
| void *resp; |
| |
| p = (struct qbman_fq_query_desc *)qbman_swp_mc_start(s); |
| if (!p) |
| return -EBUSY; |
| |
| /* FQID is a 24 bit value */ |
| p->fqid = cpu_to_le32(fqid & 0x00FFFFFF); |
| resp = qbman_swp_mc_complete(s, p, QBMAN_FQ_QUERY_NP); |
| if (!resp) { |
| pr_err("qbman: Query FQID %d NP fields failed, no response\n", |
| fqid); |
| return -EIO; |
| } |
| *r = *(struct qbman_fq_query_np_rslt *)resp; |
| /* Decode the outcome */ |
| WARN_ON((r->verb & QBMAN_RESPONSE_VERB_MASK) != QBMAN_FQ_QUERY_NP); |
| |
| /* Determine success or failure */ |
| if (r->rslt != QBMAN_MC_RSLT_OK) { |
| pr_err("Query NP fields of FQID 0x%x failed, code=0x%02x\n", |
| p->fqid, r->rslt); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| u32 qbman_fq_state_frame_count(const struct qbman_fq_query_np_rslt *r) |
| { |
| return (le32_to_cpu(r->frm_cnt) & 0x00FFFFFF); |
| } |
| |
| u32 qbman_fq_state_byte_count(const struct qbman_fq_query_np_rslt *r) |
| { |
| return le32_to_cpu(r->byte_cnt); |
| } |
| |
| struct qbman_bp_query_desc { |
| u8 verb; |
| u8 reserved; |
| __le16 bpid; |
| u8 reserved2[60]; |
| }; |
| |
| int qbman_bp_query(struct qbman_swp *s, u16 bpid, |
| struct qbman_bp_query_rslt *r) |
| { |
| struct qbman_bp_query_desc *p; |
| void *resp; |
| |
| p = (struct qbman_bp_query_desc *)qbman_swp_mc_start(s); |
| if (!p) |
| return -EBUSY; |
| |
| p->bpid = cpu_to_le16(bpid); |
| resp = qbman_swp_mc_complete(s, p, QBMAN_BP_QUERY); |
| if (!resp) { |
| pr_err("qbman: Query BPID %d fields failed, no response\n", |
| bpid); |
| return -EIO; |
| } |
| *r = *(struct qbman_bp_query_rslt *)resp; |
| /* Decode the outcome */ |
| WARN_ON((r->verb & QBMAN_RESPONSE_VERB_MASK) != QBMAN_BP_QUERY); |
| |
| /* Determine success or failure */ |
| if (r->rslt != QBMAN_MC_RSLT_OK) { |
| pr_err("Query fields of BPID 0x%x failed, code=0x%02x\n", |
| bpid, r->rslt); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| u32 qbman_bp_info_num_free_bufs(struct qbman_bp_query_rslt *a) |
| { |
| return le32_to_cpu(a->fill); |
| } |