| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2019 Western Digital Corporation or its affiliates. |
| * |
| * Authors: |
| * Anup Patel <anup.patel@wdc.com> |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/kvm_host.h> |
| #include <asm/csr.h> |
| #include <asm/hwcap.h> |
| #include <asm/sbi.h> |
| |
| long kvm_arch_dev_ioctl(struct file *filp, |
| unsigned int ioctl, unsigned long arg) |
| { |
| return -EINVAL; |
| } |
| |
| int kvm_arch_hardware_enable(void) |
| { |
| unsigned long hideleg, hedeleg; |
| |
| hedeleg = 0; |
| hedeleg |= (1UL << EXC_INST_MISALIGNED); |
| hedeleg |= (1UL << EXC_BREAKPOINT); |
| hedeleg |= (1UL << EXC_SYSCALL); |
| hedeleg |= (1UL << EXC_INST_PAGE_FAULT); |
| hedeleg |= (1UL << EXC_LOAD_PAGE_FAULT); |
| hedeleg |= (1UL << EXC_STORE_PAGE_FAULT); |
| csr_write(CSR_HEDELEG, hedeleg); |
| |
| hideleg = 0; |
| hideleg |= (1UL << IRQ_VS_SOFT); |
| hideleg |= (1UL << IRQ_VS_TIMER); |
| hideleg |= (1UL << IRQ_VS_EXT); |
| csr_write(CSR_HIDELEG, hideleg); |
| |
| /* VS should access only the time counter directly. Everything else should trap */ |
| csr_write(CSR_HCOUNTEREN, 0x02); |
| |
| csr_write(CSR_HVIP, 0); |
| |
| return 0; |
| } |
| |
| void kvm_arch_hardware_disable(void) |
| { |
| /* |
| * After clearing the hideleg CSR, the host kernel will receive |
| * spurious interrupts if hvip CSR has pending interrupts and the |
| * corresponding enable bits in vsie CSR are asserted. To avoid it, |
| * hvip CSR and vsie CSR must be cleared before clearing hideleg CSR. |
| */ |
| csr_write(CSR_VSIE, 0); |
| csr_write(CSR_HVIP, 0); |
| csr_write(CSR_HEDELEG, 0); |
| csr_write(CSR_HIDELEG, 0); |
| } |
| |
| static int __init riscv_kvm_init(void) |
| { |
| const char *str; |
| |
| if (!riscv_isa_extension_available(NULL, h)) { |
| kvm_info("hypervisor extension not available\n"); |
| return -ENODEV; |
| } |
| |
| if (sbi_spec_is_0_1()) { |
| kvm_info("require SBI v0.2 or higher\n"); |
| return -ENODEV; |
| } |
| |
| if (sbi_probe_extension(SBI_EXT_RFENCE) <= 0) { |
| kvm_info("require SBI RFENCE extension\n"); |
| return -ENODEV; |
| } |
| |
| kvm_riscv_gstage_mode_detect(); |
| |
| kvm_riscv_gstage_vmid_detect(); |
| |
| kvm_info("hypervisor extension available\n"); |
| |
| switch (kvm_riscv_gstage_mode()) { |
| case HGATP_MODE_SV32X4: |
| str = "Sv32x4"; |
| break; |
| case HGATP_MODE_SV39X4: |
| str = "Sv39x4"; |
| break; |
| case HGATP_MODE_SV48X4: |
| str = "Sv48x4"; |
| break; |
| case HGATP_MODE_SV57X4: |
| str = "Sv57x4"; |
| break; |
| default: |
| return -ENODEV; |
| } |
| kvm_info("using %s G-stage page table format\n", str); |
| |
| kvm_info("VMID %ld bits available\n", kvm_riscv_gstage_vmid_bits()); |
| |
| return kvm_init(sizeof(struct kvm_vcpu), 0, THIS_MODULE); |
| } |
| module_init(riscv_kvm_init); |
| |
| static void __exit riscv_kvm_exit(void) |
| { |
| kvm_exit(); |
| } |
| module_exit(riscv_kvm_exit); |