| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: System Reset Controller on Intel Gateway SoCs |
| |
| maintainers: |
| - Dilip Kota <eswara.kota@linux.intel.com> |
| |
| properties: |
| compatible: |
| enum: |
| - intel,rcu-lgm |
| - intel,rcu-xrx200 |
| |
| reg: |
| description: Reset controller registers. |
| maxItems: 1 |
| |
| intel,global-reset: |
| description: Global reset register offset and bit offset. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| items: |
| - description: Register offset |
| - description: Register bit offset |
| minimum: 0 |
| maximum: 31 |
| |
| "#reset-cells": |
| minimum: 2 |
| maximum: 3 |
| description: | |
| First cell is reset request register offset. |
| Second cell is bit offset in reset request register. |
| Third cell is bit offset in reset status register. |
| For LGM SoC, reset cell count is 2 as bit offset in |
| reset request and reset status registers is same. Whereas |
| 3 for legacy SoCs as bit offset differs. |
| |
| required: |
| - compatible |
| - reg |
| - intel,global-reset |
| - "#reset-cells" |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| rcu0: reset-controller@e0000000 { |
| compatible = "intel,rcu-lgm"; |
| reg = <0xe0000000 0x20000>; |
| intel,global-reset = <0x10 30>; |
| #reset-cells = <2>; |
| }; |
| |
| pwm: pwm@e0d00000 { |
| compatible = "intel,lgm-pwm"; |
| reg = <0xe0d00000 0x30>; |
| clocks = <&cgu0 1>; |
| #pwm-cells = <2>; |
| resets = <&rcu0 0x30 21>; |
| }; |