blob: 636c8817df7ee8fc87cfe586528be85c320d40d6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Hisilicon Hi3670 SoC
*
* Copyright (C) 2016, HiSilicon Ltd.
* Copyright (C) 2018, Linaro Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3670-clock.h>
/ {
compatible = "hisilicon,hi3670";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
};
cluster1 {
core0 {
cpu = <&cpu4>;
};
core1 {
cpu = <&cpu5>;
};
core2 {
cpu = <&cpu6>;
};
core3 {
cpu = <&cpu7>;
};
};
};
cpu0: cpu@0 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
};
cpu4: cpu@100 {
compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
};
cpu5: cpu@101 {
compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
};
cpu6: cpu@102 {
compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
};
cpu7: cpu@103 {
compatible = "arm,cortex-a73";
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
};
};
gic: interrupt-controller@e82b0000 {
compatible = "arm,gic-400";
reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
<0x0 0xe82b2000 0 0x2000>, /* GICC */
<0x0 0xe82b4000 0 0x2000>, /* GICH */
<0x0 0xe82b6000 0 0x2000>; /* GICV */
#interrupt-cells = <3>;
#address-cells = <0>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <1920000>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
crg_ctrl: crg_ctrl@fff35000 {
compatible = "hisilicon,hi3670-crgctrl", "syscon";
reg = <0x0 0xfff35000 0x0 0x1000>;
#clock-cells = <1>;
};
crg_rst: crg_rst_controller {
compatible = "hisilicon,hi3670-reset",
"hisilicon,hi3660-reset";
#reset-cells = <2>;
hisi,rst-syscon = <&crg_ctrl>;
};
pctrl: pctrl@e8a09000 {
compatible = "hisilicon,hi3670-pctrl", "syscon";
reg = <0x0 0xe8a09000 0x0 0x1000>;
#clock-cells = <1>;
};
pmuctrl: crg_ctrl@fff34000 {
compatible = "hisilicon,hi3670-pmuctrl", "syscon";
reg = <0x0 0xfff34000 0x0 0x1000>;
#clock-cells = <1>;
};
sctrl: sctrl@fff0a000 {
compatible = "hisilicon,hi3670-sctrl", "syscon";
reg = <0x0 0xfff0a000 0x0 0x1000>;
#clock-cells = <1>;
};
iomcu: iomcu@ffd7e000 {
compatible = "hisilicon,hi3670-iomcu", "syscon";
reg = <0x0 0xffd7e000 0x0 0x1000>;
#clock-cells = <1>;
};
media1_crg: media1_crgctrl@e87ff000 {
compatible = "hisilicon,hi3670-media1-crg", "syscon";
reg = <0x0 0xe87ff000 0x0 0x1000>;
#clock-cells = <1>;
};
media2_crg: media2_crgctrl@e8900000 {
compatible = "hisilicon,hi3670-media2-crg","syscon";
reg = <0x0 0xe8900000 0x0 0x1000>;
#clock-cells = <1>;
};
iomcu_rst: reset {
compatible = "hisilicon,hi3660-reset";
hisi,rst-syscon = <&iomcu>;
#reset-cells = <2>;
};
uart0: serial@fdf02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf02000 0x0 0x1000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
status = "disabled";
};
uart1: serial@fdf00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf00000 0x0 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart2: serial@fdf03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf03000 0x0 0x1000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
status = "disabled";
};
uart3: serial@ffd74000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xffd74000 0x0 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
status = "disabled";
};
uart4: serial@fdf01000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf01000 0x0 0x1000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
status = "disabled";
};
uart5: serial@fdf05000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
uart6: serial@fff32000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfff32000 0x0 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_UART6>,
<&crg_ctrl HI3670_PCLK>;
clock-names = "uartclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
status = "disabled";
};
gpio0: gpio@e8a0b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a0b000 0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
clock-names = "apb_pclk";
};
gpio1: gpio@e8a0c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a0c000 0x0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
clock-names = "apb_pclk";
};
gpio2: gpio@e8a0d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a0d000 0x0 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 1 6 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
clock-names = "apb_pclk";
};
gpio3: gpio@e8a0e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a0e000 0x0 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
clock-names = "apb_pclk";
};
gpio4: gpio@e8a0f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a0f000 0x0 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 18 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
clock-names = "apb_pclk";
};
gpio5: gpio@e8a10000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a10000 0x0 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 26 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
clock-names = "apb_pclk";
};
gpio6: gpio@e8a11000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a11000 0x0 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 1 34 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
clock-names = "apb_pclk";
};
gpio7: gpio@e8a12000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a12000 0x0 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 41 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
clock-names = "apb_pclk";
};
gpio8: gpio@e8a13000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a13000 0x0 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 49 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
clock-names = "apb_pclk";
};
gpio9: gpio@e8a14000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a14000 0x0 0x1000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 57 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
clock-names = "apb_pclk";
};
gpio10: gpio@e8a15000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a15000 0x0 0x1000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 65 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
clock-names = "apb_pclk";
};
gpio11: gpio@e8a16000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a16000 0x0 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 73 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
clock-names = "apb_pclk";
};
gpio12: gpio@e8a17000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a17000 0x0 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx0 0 81 1>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
clock-names = "apb_pclk";
};
gpio13: gpio@e8a18000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a18000 0x0 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
clock-names = "apb_pclk";
};
gpio14: gpio@e8a19000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a19000 0x0 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
clock-names = "apb_pclk";
};
gpio15: gpio@e8a1a000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a1a000 0x0 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
clock-names = "apb_pclk";
};
gpio16: gpio@e8a1b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a1b000 0x0 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx5 0 0 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
clock-names = "apb_pclk";
};
gpio17: gpio@e8a1c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a1c000 0x0 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx5 0 8 2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
clock-names = "apb_pclk";
};
gpio18: gpio@fff28000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff28000 0x0 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx1 4 42 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_GPIO18>;
clock-names = "apb_pclk";
};
gpio19: gpio@fff29000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff29000 0x0 0x1000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx1 0 61 2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_GPIO19>;
clock-names = "apb_pclk";
};
gpio20: gpio@e8a1f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a1f000 0x0 0x1000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx7 0 0 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
clock-names = "apb_pclk";
};
gpio21: gpio@e8a20000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xe8a20000 0x0 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx7 0 8 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
clock-names = "apb_pclk";
};
gpio22: gpio@fff0b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff0b000 0x0 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO176 */
gpio-ranges = <&pmx1 2 0 6>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
clock-names = "apb_pclk";
};
gpio23: gpio@fff0c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff0c000 0x0 0x1000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO184 */
gpio-ranges = <&pmx1 0 6 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
clock-names = "apb_pclk";
};
gpio24: gpio@fff0d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff0d000 0x0 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO192 */
gpio-ranges = <&pmx1 0 14 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
clock-names = "apb_pclk";
};
gpio25: gpio@fff0e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff0e000 0x0 0x1000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO200 */
gpio-ranges = <&pmx1 0 22 8>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
clock-names = "apb_pclk";
};
gpio26: gpio@fff0f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff0f000 0x0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO208 */
gpio-ranges = <&pmx1 0 30 1>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
clock-names = "apb_pclk";
};
gpio27: gpio@fff10000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff10000 0x0 0x1000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
/* GPIO216 */
gpio-ranges = <&pmx1 4 31 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
clock-names = "apb_pclk";
};
gpio28: gpio@fff1d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x0 0xfff1d000 0x0 0x1000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmx1 1 35 7>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
clock-names = "apb_pclk";
};
/* UFS */
ufs: ufs@ff3c0000 {
compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
/* 0: HCI standard */
/* 1: UFS SYS CTRL */
reg = <0x0 0xff3c0000 0x0 0x1000>,
<0x0 0xff3e0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
clock-names = "ref_clk", "phy_clk";
freq-table-hz = <0 0
0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
};
/* SD */
dwmmc1: dwmmc1@ff37f000 {
compatible = "hisilicon,hi3670-dw-mshc",
"hisilicon,hi3660-dw-mshc";
reg = <0x0 0xff37f000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
<&crg_ctrl HI3670_HCLK_GATE_SD>;
clock-names = "ciu", "biu";
clock-frequency = <3200000>;
resets = <&crg_rst 0x94 18>;
reset-names = "reset";
hisilicon,peripheral-syscon = <&sctrl>;
card-detect-delay = <200>;
status = "disabled";
};
/* SDIO */
dwmmc2: dwmmc2@fc183000 {
compatible = "hisilicon,hi3670-dw-mshc",
"hisilicon,hi3660-dw-mshc";
reg = <0x0 0xfc183000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
<&crg_ctrl HI3670_HCLK_GATE_SDIO>;
clock-names = "ciu", "biu";
clock-frequency = <3200000>;
resets = <&crg_rst 0x94 20>;
reset-names = "reset";
card-detect-delay = <200>;
status = "disabled";
};
/* I2C */
i2c0: i2c@ffd71000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xffd71000 0x0 0x1000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&iomcu HI3670_CLK_GATE_I2C0>;
resets = <&iomcu_rst 0x20 3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
status = "disabled";
};
i2c1: i2c@ffd72000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xffd72000 0x0 0x1000>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&iomcu HI3670_CLK_GATE_I2C1>;
resets = <&iomcu_rst 0x20 4>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
status = "disabled";
};
i2c2: i2c@ffd73000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xffd73000 0x0 0x1000>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&iomcu HI3670_CLK_GATE_I2C2>;
resets = <&iomcu_rst 0x20 5>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
status = "disabled";
};
i2c3: i2c@fdf0c000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xfdf0c000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>;
resets = <&crg_rst 0x78 7>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
status = "disabled";
};
i2c4: i2c@fdf0d000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xfdf0d000 0x0 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>;
resets = <&crg_rst 0x78 27>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
status = "disabled";
};
};
};