blob: 567b331065560ff256a64d7cb3b3394e64991142 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/dts-v1/;
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Inforce 6640 Single Board Computer";
compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
qcom,msm-id = <291 0x00030001>;
qcom,board-id = <0x00010018 0>;
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
v1p05: v1p05-regulator {
compatible = "regulator-fixed";
reglator-name = "v1p05";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
vin-supply = <&v5p0>;
};
v12_poe: v12-poe-regulator {
compatible = "regulator-fixed";
reglator-name = "v12_poe";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
v3p3: v3p3-regulator {
compatible = "regulator-fixed";
regulator-name = "v3p3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&v12_poe>;
};
v5p0: v5p0-regulator {
compatible = "regulator-fixed";
regulator-name = "v5p0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&v12_poe>;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
};
};
&blsp2_uart2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_2pins_default>;
pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
&gpu {
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};
&mdss {
status = "okay";
};
&tlmm {
sdc2_pins_default: sdc2-pins-default {
clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
cd {
pins = "gpio38";
function = "gpio";
bias-pull-up;
drive-strength = <16>;
};
};
sdc2_pins_sleep: sdc2-pins-sleep {
clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
cd {
pins = "gpio38";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
};
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
vdd_s8-supply = <&vph_pwr>;
vdd_s9-supply = <&vph_pwr>;
vdd_s10-supply = <&vph_pwr>;
vdd_s11-supply = <&vph_pwr>;
vdd_s12-supply = <&vph_pwr>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l25-supply = <&vreg_s3a_1p3>;
vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
vreg_s4a_1p8: s4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vreg_s5a_2p15: s5 {
regulator-name = "vreg_s5a_2p15";
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
vreg_s7a_1p0: s7 {
regulator-name = "vreg_s7a_1p0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
vreg_l1a_1p0: l1 {
regulator-name = "vreg_l1a_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l2a_1p25: l2 {
regulator-name = "vreg_l2a_1p25";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
vreg_l3a_0p875: l3 {
regulator-name = "vreg_l3a_0p875";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
};
vreg_l4a_1p225: l4 {
regulator-name = "vreg_l4a_1p225";
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
vreg_l6a_1p2: l6 {
regulator-name = "vreg_l6a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vreg_l8a_1p8: l8 {
regulator-name = "vreg_l8a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l9a_1p8: l9 {
regulator-name = "vreg_l9a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l10a_1p8: l10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l11a_1p15: l11 {
regulator-name = "vreg_l11a_1p15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
vreg_l12a_1p8: l12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l13a_2p95: l13 {
regulator-name = "vreg_l13a_2p95";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vreg_l14a_1p8: l14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l15a_1p8: l15 {
regulator-name = "vreg_l15a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l16a_2p7: l16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
vreg_l17a_2p8: l17 {
regulator-name = "vreg_l17a_2p8";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
vreg_l18a_2p85: l18 {
regulator-name = "vreg_l18a_2p85";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
};
vreg_l19a_2p8: l19 {
regulator-name = "vreg_l19a_2p8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
vreg_l20a_2p95: l20 {
regulator-name = "vreg_l20a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-name = "vreg_l21a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
vreg_l22a_3p0: l22 {
regulator-name = "vreg_l22a_3p0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vreg_l23a_2p8: l23 {
regulator-name = "vreg_l23a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l24a_3p075: l24 {
regulator-name = "vreg_l24a_3p075";
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
vreg_l25a_1p2: l25 {
regulator-name = "vreg_l25a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
vreg_l26a_0p8: l27 {
regulator-name = "vreg_l26a_0p8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l28a_0p925: l28 {
regulator-name = "vreg_l28a_0p925";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
vreg_l29a_2p8: l29 {
regulator-name = "vreg_l29a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l30a_1p8: l30 {
regulator-name = "vreg_l30a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l32a_1p8: l32 {
regulator-name = "vreg_l32a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-name = "vreg_lvs1a_1p8";
};
vreg_lvs2a_1p8: lvs2 {
regulator-name = "vreg_lvs2a_1p8";
};
};
};
&sdhc2 {
status = "okay";
bus-width = <4>;
cd-gpios = <&tlmm 38 0x1>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_pins_default>;
pinctrl-1 = <&sdc2_pins_sleep>;
};
&ufshc {
status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l25a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&venus {
status = "okay";
};