blob: 265e539e7e99efcc1ecb6808686a1f163d842de4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Alcatel OneTouch Idol 3 (4.7)";
compatible = "alcatel,idol347", "qcom,msm8916";
chassis-type = "handset";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
label = "GPIO Buttons";
volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
};
&blsp1_uart2 {
status = "okay";
};
&blsp_i2c4 {
status = "okay";
touchscreen@26 {
compatible = "mstar,msg2638";
reg = <0x26>;
interrupt-parent = <&msmgpio>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_reset_default>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
touchscreen-size-x = <2048>;
touchscreen-size-y = <2048>;
};
};
&blsp_i2c5 {
status = "okay";
magnetometer@c {
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mag_reset_default>;
mount-matrix = "0", "1", "0",
"-1", "0", "0",
"0", "0", "1";
};
accelerometer@f {
compatible = "kionix,kxtj21009";
reg = <0x0f>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
interrupt-parent = <&msmgpio>;
interrupts = <31 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&accel_int_default>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
proximity@48 {
compatible = "sensortek,stk3310";
reg = <0x48>;
interrupt-parent = <&msmgpio>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&proximity_int_default>;
};
gyroscope@68 {
compatible = "bosch,bmg160";
reg = <0x68>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
interrupt-parent = <&msmgpio>;
interrupts = <97 IRQ_TYPE_EDGE_RISING>,
<98 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gyro_int_default>;
};
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pm8916_vib {
status = "okay";
};
&pronto {
status = "okay";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2100000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l8 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2900000>;
};
l9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l10 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2800000>;
};
l11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
&msmgpio {
accel_int_default: accel-int-default {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
gyro_int_default: gyro-int-default {
pins = "gpio97", "gpio98";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mag_reset_default: mag-reset-default {
pins = "gpio8";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
proximity_int_default: proximity-int-default {
pins = "gpio12";
function = "gpio";
drive-strength = <6>;
bias-pull-up;
};
ts_int_reset_default: ts-int-reset-default {
pins = "gpio13", "gpio100";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_id_default: usb-id-default {
pins = "gpio69";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};