blob: e90f99ef532346929a22c7bcc506f56f9cf1a5e0 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Pompom board device tree source
*
* Copyright 2020 Google LLC.
*/
#include "sc7180.dtsi"
ap_ec_spi: &spi6 {};
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
thermal-zones {
5v-choke-thermal {
polling-delay-passive = <0>;
polling-delay = <250>;
thermal-sensors = <&pm6150_adc_tm 1>;
trips {
5v-choke-crit {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
};
&alc5682 {
realtek,dmic-clk-driving-high = "true";
};
&cpu6_alert0 {
temperature = <60000>;
};
&cpu6_alert1 {
temperature = <65000>;
};
&cpu6_thermal {
sustainable-power = <1124>;
};
&cpu7_alert0 {
temperature = <60000>;
};
&cpu7_alert1 {
temperature = <65000>;
};
&cpu7_thermal {
sustainable-power = <1124>;
};
&cpu8_alert0 {
temperature = <60000>;
};
&cpu8_alert1 {
temperature = <65000>;
};
&cpu8_thermal {
sustainable-power = <1124>;
};
&cpu9_alert0 {
temperature = <60000>;
};
&cpu9_alert1 {
temperature = <65000>;
};
&cpu9_thermal {
sustainable-power = <1124>;
};
&gpio_keys {
status = "okay";
};
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
ap_ts: touchscreen@10 {
compatible = "hid-over-i2c";
reg = <0x10>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
interrupt-parent = <&tlmm>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
post-power-on-delay-ms = <20>;
hid-descr-addr = <0x0001>;
vdd-supply = <&pp3300_ts>;
};
};
&keyboard_controller {
function-row-physmap = <
MATRIX_KEY(0x00, 0x02, 0) /* T1 */
MATRIX_KEY(0x03, 0x02, 0) /* T2 */
MATRIX_KEY(0x02, 0x02, 0) /* T3 */
MATRIX_KEY(0x01, 0x02, 0) /* T4 */
MATRIX_KEY(0x03, 0x04, 0) /* T5 */
MATRIX_KEY(0x02, 0x04, 0) /* T6 */
MATRIX_KEY(0x01, 0x04, 0) /* T7 */
MATRIX_KEY(0x02, 0x09, 0) /* T8 */
MATRIX_KEY(0x01, 0x09, 0) /* T9 */
MATRIX_KEY(0x00, 0x04, 0) /* T10 */
>;
linux,keymap = <
MATRIX_KEY(0x00, 0x02, KEY_BACK)
MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
MATRIX_KEY(0x01, 0x02, KEY_SCALE)
MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
MATRIX_KEY(0x02, 0x09, KEY_MUTE)
MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
};
&panel {
compatible = "kingdisplay,kd116n21-30nv-a010";
};
&pen_insert {
/* Insert = high, eject = low */
gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
};
&pm6150_adc {
5v-choke-thermistor@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&pm6150_adc_tm {
status = "okay";
5v-choke-thermistor@1 {
reg = <1>;
io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&sdhc_2 {
status = "okay";
};
&sound {
model = "sc7180-rt5682-max98357a-2mic";
pinctrl-names = "default";
pinctrl-0 = <&dmic_sel>;
dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
};
&usb_c1 {
status = "disabled";
};
&wifi {
qcom,ath10k-calibration-variant = "GO_POMPOM";
};
/* PINCTRL - board-specific pinctrl */
&tlmm {
gpio-line-names = "TP_INT_ODL",
"AP_RAM_ID0",
"AP_SKU_ID2",
"AP_RAM_ID1",
"",
"AP_RAM_ID2",
"AP_TP_I2C_SDA",
"AP_TP_I2C_SCL",
"TS_RESET_L",
"TS_INT_L",
"",
"EDP_BRIJ_IRQ",
"AP_EDP_BKLTEN",
"",
"",
"EDP_BRIJ_I2C_SDA",
"EDP_BRIJ_I2C_SCL",
"HUB_RST_L",
"",
"",
"",
"",
"",
"AMP_EN",
"P_SENSOR_INT_L",
"AP_SAR_SENSOR_SDA",
"AP_SAR_SENSOR_SCL",
"",
"HP_IRQ",
"",
"EN_PP3300_DX_EDP",
"AP_BRD_ID2",
"BRIJ_SUSPEND",
"AP_BRD_ID0",
"AP_H1_SPI_MISO",
"AP_H1_SPI_MOSI",
"AP_H1_SPI_CLK",
"AP_H1_SPI_CS_L",
"",
"",
"",
"",
"H1_AP_INT_ODL",
"",
"UART_AP_TX_DBG_RX",
"UART_DBG_TX_AP_RX",
"HP_I2C_SDA",
"HP_I2C_SCL",
"FORCED_USB_BOOT",
"AMP_BCLK",
"AMP_LRCLK",
"AMP_DIN",
"PEN_PDCT_L",
"HP_BCLK",
"HP_LRCLK",
"HP_DOUT",
"HP_DIN",
"HP_MCLK",
"AP_SKU_ID0",
"AP_EC_SPI_MISO",
"AP_EC_SPI_MOSI",
"AP_EC_SPI_CLK",
"AP_EC_SPI_CS_L",
"AP_SPI_CLK",
"AP_SPI_MOSI",
"AP_SPI_MISO",
/*
* AP_FLASH_WP_L is crossystem ABI. Schematics
* call it BIOS_FLASH_WP_L.
*/
"AP_FLASH_WP_L",
"",
"AP_SPI_CS0_L",
"SD_CD_ODL",
"",
"",
"",
"",
"",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RST",
"UIM2_PRESENT",
"UIM1_DATA",
"UIM1_CLK",
"UIM1_RST",
"",
"EN_PP3300_CODEC",
"EN_PP3300_HUB",
"",
"DMIC_SEL",
"",
"",
"",
"AP_SKU_ID1",
"AP_RST_REQ",
"",
"AP_BRD_ID1",
"AP_EC_INT_R_L",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"EDP_BRIJ_EN",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"AP_TS_PEN_I2C_SDA",
"AP_TS_PEN_I2C_SCL",
"DP_HOT_PLUG_DET",
"EC_IN_RW_ODL";
dmic_sel: dmic-sel {
pinmux {
pins = "gpio86";
function = "gpio";
};
pinconf {
pins = "gpio86";
bias-pull-down;
};
};
};