blob: 11d0a8c1cf35a39d637fcad894868695158a2571 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
* Copyright (c) 2020, AngeloGioacchino Del Regno
* <angelogioacchino.delregno@somainline.org>
*/
#include "pm660.dtsi"
#include "pm660l.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
/ {
/* required for bootloader to select correct board */
qcom,msm-id = <318 0>;
qcom,board-id = <8 1>;
qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
/* This part enables graphical output via bootloader-enabled display */
chosen {
bootargs = "earlycon=tty0 console=tty0";
#address-cells = <2>;
#size-cells = <2>;
ranges;
stdout-path = "framebuffer0";
framebuffer0: framebuffer@9d400000 {
compatible = "simple-framebuffer";
reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
width = <1080>;
height = <1920>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
status= "okay";
};
};
board_vbat: vbat-regulator {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
regulator-always-on;
regulator-boot-on;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
};
cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg {
compatible = "regulator-fixed";
regulator-name = "cam_vdig_imx300_219_vreg";
startup-delay-us = <0>;
enable-active-high;
gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cam_vdig_default>;
};
cam_vana_front_vreg: cam_vana_front_vreg {
compatible = "regulator-fixed";
regulator-name = "cam_vana_front_vreg";
startup-delay-us = <0>;
enable-active-high;
gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&imx219_vana_default>;
};
cam_vana_rear_vreg: cam_vana_rear_vreg {
compatible = "regulator-fixed";
regulator-name = "cam_vana_rear_vreg";
startup-delay-us = <0>;
enable-active-high;
gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
regulator-always-on;
pinctrl-names = "default";
pinctrl-0 = <&imx300_vana_default>;
};
gpio_keys {
status = "okay";
compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
camera_focus {
label = "Camera Focus";
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
debounce-interval = <15>;
};
camera_snapshot {
label = "Camera Snapshot";
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
debounce-interval = <15>;
};
vol_down {
label = "Volume Down";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x10000>;
console-size = <0x60000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
ecc-size = <16>;
status = "okay";
};
debug_region@ffb00000 {
reg = <0x00 0xffb00000 0x00 0x100000>;
no-map;
};
removed_region@85800000 {
reg = <0x00 0x85800000 0x00 0x3700000>;
no-map;
};
};
/*
* Until we hook up type-c detection, we
* have to stick with this. But it works.
*/
extcon_usb: extcon-usb {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
};
&adsp_pil {
firmware-name = "adsp.mdt";
};
&blsp_i2c1 {
status = "okay";
touchscreen: synaptics-rmi4-i2c@70 {
compatible = "syna,rmi4-i2c";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
interrupts-extended = <&tlmm 45 0x2008>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
syna,reset-delay-ms = <200>;
syna,startup-delay-ms = <220>;
rmi4-f01@1 {
reg = <0x01>;
syna,nosleep-mode = <1>;
};
rmi4-f11@11 {
reg = <0x11>;
syna,sensor-type = <1>;
};
};
};
&blsp_i2c2 {
status = "okay";
/* SMB1351 charger */
};
/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
&blsp_i2c6 {
status = "okay";
/* NXP NFC */
};
&blsp1_uart2 {
status = "okay";
/* MSM serial console */
};
&blsp2_uart1 {
status = "okay";
/* HCI Bluetooth */
};
&pon {
volup {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEUP>;
};
};
&qusb2phy {
status = "okay";
vdd-supply = <&vreg_l1b_0p925>;
vdda-pll-supply = <&vreg_l10a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
};
&rpm_requests {
pm660l-regulators {
compatible = "qcom,rpm-pm660l-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
vdd_l2-supply = <&vreg_bob>;
vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
vdd_l4_l6-supply = <&vreg_bob>;
vdd_bob-supply = <&vph_pwr>;
vreg_s1b_1p125: s1 {
regulator-min-microvolt = <1125000>;
regulator-max-microvolt = <1125000>;
regulator-enable-ramp-delay = <200>;
regulator-ramp-delay = <0>;
};
vreg_s2b_1p05: s2 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <200>;
regulator-ramp-delay = <0>;
};
/*
* At least on Nile's configuration, S3B/S4B (VDD_CX) and
* S5B (VDD_MX) are managed only through RPM Power Domains.
* Trying to set a voltage on the main supply will create
* havoc and freeze the SoC.
* In any case, reference voltages for these regulators are:
* S3B/S4B: 0.870V
* S5B: 0.915V
*/
/* LDOs */
vreg_l1b_0p925: l1 {
regulator-min-microvolt = <920000>;
regulator-max-microvolt = <928000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
vreg_l2b_2p95: l2 {
/*
* This regulator supports 1.648 - 3.104V on this board
* but we set a max voltage of anything less than 2.7V
* to satisfy a condition in sdhci.c that will disable
* 3.3V SDHCI signaling, which happens to be not really
* supported on the Xperia Nile/Ganges platform.
*/
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <2696000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
vreg_l3b_3p0: l3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-min-microamp = <200>;
regulator-max-microamp = <600000>;
regulator-system-load = <100000>;
regulator-allow-set-load;
};
vreg_l4b_2p95: l4 {
regulator-min-microvolt = <2944000>;
regulator-max-microvolt = <2952000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-min-microamp = <200>;
regulator-max-microamp = <600000>;
regulator-system-load = <570000>;
regulator-allow-set-load;
};
/*
* Downstream specifies a range of 1721-3600mV,
* but the only assigned consumers are SDHCI2 VMMC
* and Coresight QPDI that both request pinned 2.95V.
* Tighten the range to 1.8-3.328 (closest to 3.3) to
* make the mmc driver happy.
*/
vreg_l5b_2p95: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3328000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
regulator-system-load = <800000>;
};
vreg_l6b_3p3: l6 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <3312000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l7b_3p125: l7 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <3128000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l8b_3p3: l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3400000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
/* L9B (870mV) is currently unused */
/* L10B (915mV) is currently unused */
vreg_bob: bob {
regulator-min-microvolt = <3304000>;
regulator-max-microvolt = <3624000>;
regulator-enable-ramp-delay = <500>;
regulator-ramp-delay = <0>;
};
};
pm660-regulators {
compatible = "qcom,rpm-pm660-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
vdd_l2_l3-supply = <&vreg_s2b_1p05>;
vdd_l5-supply = <&vreg_s2b_1p05>;
vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
/*
* S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
* by the Core Power Reduction hardened (CPRh) and the
* Operating State Manager (OSM) HW automatically.
*/
vreg_s4a_2p04: s4 {
regulator-min-microvolt = <2040000>;
regulator-max-microvolt = <2040000>;
regulator-enable-ramp-delay = <200>;
regulator-ramp-delay = <0>;
regulator-always-on;
};
vreg_s5a_1p35: s5 {
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1350000>;
regulator-enable-ramp-delay = <200>;
regulator-ramp-delay = <0>;
};
vreg_s6a_0p87: s6 {
regulator-min-microvolt = <504000>;
regulator-max-microvolt = <992000>;
regulator-enable-ramp-delay = <150>;
regulator-ramp-delay = <0>;
};
/* LDOs */
vreg_l1a_1p225: l1 {
regulator-min-microvolt = <1226000>;
regulator-max-microvolt = <1250000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
vreg_l2a_1p0: l2 {
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1008000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l3a_1p0: l3 {
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1008000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l5a_0p848: l5 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <952000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l6a_1p3: l6 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1368000>;
regulator-allow-set-load;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l7a_1p2: l7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l8a_1p8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-system-load = <325000>;
regulator-allow-set-load;
};
vreg_l9a_1p8: l9 {
regulator-min-microvolt = <1804000>;
regulator-max-microvolt = <1896000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
vreg_l10a_1p8: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1944000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
vreg_l11a_1p8: l11 {
regulator-min-microvolt = <1784000>;
regulator-max-microvolt = <1944000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l12a_1p8: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1944000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
/* This gives power to the LPDDR4: never turn it off! */
vreg_l13a_1p8: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1944000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-boot-on;
regulator-always-on;
};
vreg_l14a_1p8: l14 {
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1904000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l15a_1p8: l15 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <2952000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
/* L16A (2.70V) is unused */
vreg_l17a_1p8: l17 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <2952000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
};
vreg_l18a_1v8: l18 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <10>;
regulator-min-microamp = <200>;
regulator-max-microamp = <50000>;
regulator-system-load = <10000>;
regulator-allow-set-load;
};
vreg_l19a_3p3: l19 {
regulator-min-microvolt = <3312000>;
regulator-max-microvolt = <3400000>;
regulator-enable-ramp-delay = <250>;
regulator-ramp-delay = <0>;
regulator-allow-set-load;
};
};
};
&sdhc_1 {
status = "okay";
supports-cqe;
/* SoMC Nile platform's eMMC doesn't support HS200 mode */
mmc-ddr-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
vmmc-supply = <&vreg_l4b_2p95>;
vqmmc-supply = <&vreg_l8a_1p8>;
};
&sdhc_2 {
status = "okay";
vmmc-supply = <&vreg_l5b_2p95>;
vqmmc-supply = <&vreg_l2b_2p95>;
};
&tlmm {
gpio-reserved-ranges = <8 4>;
ts_int_active: ts-int-active {
pins = "gpio45";
drive-strength = <8>;
bias-pull-up;
};
ts_lcd_id_active: ts-lcd-id-active {
pins = "gpio56";
drive-strength = <8>;
bias-disable;
};
imx300_vana_default: imx300-vana-default {
pins = "gpio50";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
imx219_vana_default: imx219-vana-default {
pins = "gpio51";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
cam_vdig_default: cam-vdig-default {
pins = "gpio52";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
};
&usb3 {
status = "okay";
};
&usb3_dwc3 {
dr_mode = "peripheral";
extcon = <&extcon_usb>;
};