| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) Siemens AG, 2021 |
| * |
| * Authors: |
| * Chao Zeng <chao.zeng@siemens.com> |
| * Jan Kiszka <jan.kiszka@siemens.com> |
| * |
| * Common bits of the IOT2050 Basic and Advanced variants, PG2 |
| */ |
| |
| &main_pmx0 { |
| cp2102n_reset_pin_default: cp2102n-reset-pin-default { |
| pinctrl-single,pins = < |
| /* (AF12) GPIO1_24, used as cp2102 reset */ |
| AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7) |
| >; |
| }; |
| }; |
| |
| &main_gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp2102n_reset_pin_default>; |
| gpio-line-names = |
| "", "", "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", "", "", |
| "", "", "", "", "CP2102N-RESET"; |
| }; |
| |
| &dss { |
| /* Workaround needed to get DP clock of 154Mhz */ |
| assigned-clocks = <&k3_clks 67 0>; |
| }; |
| |
| &serdes0 { |
| assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; |
| assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; |
| }; |
| |
| &dwc3_0 { |
| assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ |
| <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ |
| phys = <&serdes0 PHY_TYPE_USB3 0>; |
| phy-names = "usb3-phy"; |
| }; |
| |
| &usb0 { |
| maximum-speed = "super-speed"; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| }; |
