| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2018 Google LLC. |
| * |
| * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution. |
| * Based on SX9500 driver and Semtech driver using the input framework |
| * <https://my.syncplicity.com/share/teouwsim8niiaud/ |
| * linux-driver-SX9310_NoSmartHSensing>. |
| * Reworked in April 2019 by Evan Green <evgreen@chromium.org> |
| * and in January 2020 by Daniel Campello <campello@chromium.org>. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/iio/iio.h> |
| |
| #include "sx_common.h" |
| |
| /* Register definitions. */ |
| #define SX9310_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC |
| #define SX9310_REG_STAT0 0x01 |
| #define SX9310_REG_STAT1 0x02 |
| #define SX9310_REG_STAT1_COMPSTAT_MASK GENMASK(3, 0) |
| #define SX9310_REG_IRQ_MSK 0x03 |
| #define SX9310_CONVDONE_IRQ BIT(3) |
| #define SX9310_FAR_IRQ BIT(5) |
| #define SX9310_CLOSE_IRQ BIT(6) |
| #define SX9310_REG_IRQ_FUNC 0x04 |
| |
| #define SX9310_REG_PROX_CTRL0 0x10 |
| #define SX9310_REG_PROX_CTRL0_SENSOREN_MASK GENMASK(3, 0) |
| #define SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK GENMASK(7, 4) |
| #define SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS 0x01 |
| #define SX9310_REG_PROX_CTRL1 0x11 |
| #define SX9310_REG_PROX_CTRL2 0x12 |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_MASK GENMASK(7, 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3 (0x03 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 (0x02 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1 (0x01 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS3 (0x00 << 6) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC (0x01 << 2) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND (0x02 << 2) |
| #define SX9310_REG_PROX_CTRL3 0x13 |
| #define SX9310_REG_PROX_CTRL3_GAIN0_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL3_GAIN0_X8 (0x03 << 2) |
| #define SX9310_REG_PROX_CTRL3_GAIN12_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL3_GAIN12_X4 0x02 |
| #define SX9310_REG_PROX_CTRL4 0x14 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MASK GENMASK(2, 0) |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST 0x07 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE 0x06 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_FINE 0x05 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM 0x04 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE 0x03 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE 0x02 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE 0x01 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST 0x00 |
| #define SX9310_REG_PROX_CTRL5 0x15 |
| #define SX9310_REG_PROX_CTRL5_RANGE_SMALL (0x03 << 6) |
| #define SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 (0x01 << 2) |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_SHIFT 0 |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_1P25 0x02 |
| #define SX9310_REG_PROX_CTRL6 0x16 |
| #define SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT 0x20 |
| #define SX9310_REG_PROX_CTRL7 0x17 |
| #define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 (0x01 << 3) |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK GENMASK(2, 0) |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_SHIFT 0 |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 0x05 |
| #define SX9310_REG_PROX_CTRL8 0x18 |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK GENMASK(7, 3) |
| #define SX9310_REG_PROX_CTRL9 0x19 |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_28 (0x08 << 3) |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 (0x11 << 3) |
| #define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 0x03 |
| #define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 0x05 |
| #define SX9310_REG_PROX_CTRL10 0x1a |
| #define SX9310_REG_PROX_CTRL10_HYST_MASK GENMASK(5, 4) |
| #define SX9310_REG_PROX_CTRL10_HYST_6PCT (0x01 << 4) |
| #define SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 0x01 |
| #define SX9310_REG_PROX_CTRL11 0x1b |
| #define SX9310_REG_PROX_CTRL12 0x1c |
| #define SX9310_REG_PROX_CTRL13 0x1d |
| #define SX9310_REG_PROX_CTRL14 0x1e |
| #define SX9310_REG_PROX_CTRL15 0x1f |
| #define SX9310_REG_PROX_CTRL16 0x20 |
| #define SX9310_REG_PROX_CTRL17 0x21 |
| #define SX9310_REG_PROX_CTRL18 0x22 |
| #define SX9310_REG_PROX_CTRL19 0x23 |
| #define SX9310_REG_SAR_CTRL0 0x2a |
| #define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES (0x02 << 5) |
| #define SX9310_REG_SAR_CTRL0_SARHYST_8 (0x02 << 3) |
| #define SX9310_REG_SAR_CTRL1 0x2b |
| /* Each increment of the slope register is 0.0078125. */ |
| #define SX9310_REG_SAR_CTRL1_SLOPE(_hnslope) (_hnslope / 78125) |
| #define SX9310_REG_SAR_CTRL2 0x2c |
| #define SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT 0x3c |
| |
| #define SX9310_REG_SENSOR_SEL 0x30 |
| #define SX9310_REG_USE_MSB 0x31 |
| #define SX9310_REG_USE_LSB 0x32 |
| #define SX9310_REG_AVG_MSB 0x33 |
| #define SX9310_REG_AVG_LSB 0x34 |
| #define SX9310_REG_DIFF_MSB 0x35 |
| #define SX9310_REG_DIFF_LSB 0x36 |
| #define SX9310_REG_OFFSET_MSB 0x37 |
| #define SX9310_REG_OFFSET_LSB 0x38 |
| #define SX9310_REG_SAR_MSB 0x39 |
| #define SX9310_REG_SAR_LSB 0x3a |
| #define SX9310_REG_I2C_ADDR 0x40 |
| #define SX9310_REG_PAUSE 0x41 |
| #define SX9310_REG_WHOAMI 0x42 |
| #define SX9310_WHOAMI_VALUE 0x01 |
| #define SX9311_WHOAMI_VALUE 0x02 |
| #define SX9310_REG_RESET 0x7f |
| |
| |
| /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */ |
| #define SX9310_NUM_CHANNELS 4 |
| static_assert(SX9310_NUM_CHANNELS <= SX_COMMON_MAX_NUM_CHANNELS); |
| |
| #define SX9310_NAMED_CHANNEL(idx, name) \ |
| { \ |
| .type = IIO_PROXIMITY, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .info_mask_separate_available = \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .info_mask_shared_by_all_available = \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .indexed = 1, \ |
| .channel = idx, \ |
| .extend_name = name, \ |
| .address = SX9310_REG_DIFF_MSB, \ |
| .event_spec = sx_common_events, \ |
| .num_event_specs = ARRAY_SIZE(sx_common_events), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| #define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL) |
| |
| struct sx931x_info { |
| const char *name; |
| unsigned int whoami; |
| }; |
| |
| static const struct iio_chan_spec sx9310_channels[] = { |
| SX9310_CHANNEL(0), /* CS0 */ |
| SX9310_CHANNEL(1), /* CS1 */ |
| SX9310_CHANNEL(2), /* CS2 */ |
| SX9310_NAMED_CHANNEL(3, "comb"), /* COMB */ |
| |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| /* |
| * Each entry contains the integer part (val) and the fractional part, in micro |
| * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. |
| */ |
| static const struct { |
| int val; |
| int val2; |
| } sx9310_samp_freq_table[] = { |
| { 500, 0 }, /* 0000: Min (no idle time) */ |
| { 66, 666666 }, /* 0001: 15 ms */ |
| { 33, 333333 }, /* 0010: 30 ms (Typ.) */ |
| { 22, 222222 }, /* 0011: 45 ms */ |
| { 16, 666666 }, /* 0100: 60 ms */ |
| { 11, 111111 }, /* 0101: 90 ms */ |
| { 8, 333333 }, /* 0110: 120 ms */ |
| { 5, 0 }, /* 0111: 200 ms */ |
| { 2, 500000 }, /* 1000: 400 ms */ |
| { 1, 666666 }, /* 1001: 600 ms */ |
| { 1, 250000 }, /* 1010: 800 ms */ |
| { 1, 0 }, /* 1011: 1 s */ |
| { 0, 500000 }, /* 1100: 2 s */ |
| { 0, 333333 }, /* 1101: 3 s */ |
| { 0, 250000 }, /* 1110: 4 s */ |
| { 0, 200000 }, /* 1111: 5 s */ |
| }; |
| static const unsigned int sx9310_scan_period_table[] = { |
| 2, 15, 30, 45, 60, 90, 120, 200, |
| 400, 600, 800, 1000, 2000, 3000, 4000, 5000, |
| }; |
| |
| static const struct regmap_range sx9310_writable_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC), |
| regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19), |
| regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2), |
| regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL), |
| regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB), |
| regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_writeable_regs = { |
| .yes_ranges = sx9310_writable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9310_readable_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC), |
| regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19), |
| regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2), |
| regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB), |
| regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_readable_regs = { |
| .yes_ranges = sx9310_readable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9310_volatile_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1), |
| regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB), |
| regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_volatile_regs = { |
| .yes_ranges = sx9310_volatile_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges), |
| }; |
| |
| static const struct regmap_config sx9310_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = SX9310_REG_RESET, |
| .cache_type = REGCACHE_RBTREE, |
| |
| .wr_table = &sx9310_writeable_regs, |
| .rd_table = &sx9310_readable_regs, |
| .volatile_table = &sx9310_volatile_regs, |
| }; |
| |
| static int sx9310_read_prox_data(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, __be16 *val) |
| { |
| int ret; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel); |
| if (ret) |
| return ret; |
| |
| return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); |
| } |
| |
| /* |
| * If we have no interrupt support, we have to wait for a scan period |
| * after enabling a channel to get a result. |
| */ |
| static int sx9310_wait_for_sample(struct sx_common_data *data) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val); |
| if (ret) |
| return ret; |
| |
| val = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, val); |
| |
| msleep(sx9310_scan_period_table[val]); |
| |
| return 0; |
| } |
| |
| static int sx9310_read_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval, gain; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL3, ®val); |
| if (ret) |
| return ret; |
| |
| switch (chan->channel) { |
| case 0: |
| case 3: |
| gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN0_MASK, regval); |
| break; |
| case 1: |
| case 2: |
| gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN12_MASK, regval); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val = 1 << gain; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_samp_freq(struct sx_common_data *data, int *val, int *val2) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, regval); |
| *val = sx9310_samp_freq_table[regval].val; |
| *val2 = sx9310_samp_freq_table[regval].val2; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int sx9310_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *val, |
| int *val2, long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| iio_device_claim_direct_scoped(return -EBUSY, indio_dev) |
| return sx_common_read_proximity(data, chan, val); |
| unreachable(); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| iio_device_claim_direct_scoped(return -EBUSY, indio_dev) |
| return sx9310_read_gain(data, chan, val); |
| unreachable(); |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9310_read_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const int sx9310_gain_vals[] = { 1, 2, 4, 8 }; |
| |
| static int sx9310_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *type = IIO_VAL_INT; |
| *length = ARRAY_SIZE(sx9310_gain_vals); |
| *vals = sx9310_gain_vals; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = ARRAY_SIZE(sx9310_samp_freq_table) * 2; |
| *vals = (int *)sx9310_samp_freq_table; |
| return IIO_AVAIL_LIST; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const unsigned int sx9310_pthresh_codes[] = { |
| 2, 4, 6, 8, 12, 16, 20, 24, 28, 32, 40, 48, 56, 64, 72, 80, 88, 96, 112, |
| 128, 144, 160, 192, 224, 256, 320, 384, 512, 640, 768, 1024, 1536 |
| }; |
| |
| static int sx9310_get_thresh_reg(unsigned int channel) |
| { |
| switch (channel) { |
| case 0: |
| case 3: |
| return SX9310_REG_PROX_CTRL8; |
| case 1: |
| case 2: |
| return SX9310_REG_PROX_CTRL9; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9310_read_thresh(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int reg; |
| unsigned int regval; |
| int ret; |
| |
| reg = ret = sx9310_get_thresh_reg(chan->channel); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| if (regval >= ARRAY_SIZE(sx9310_pthresh_codes)) |
| return -EINVAL; |
| |
| *val = sx9310_pthresh_codes[regval]; |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_hysteresis(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval, pthresh; |
| int ret; |
| |
| ret = sx9310_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_HYST_MASK, regval); |
| if (!regval) |
| regval = 5; |
| |
| /* regval is at most 5 */ |
| *val = pthresh >> (5 - regval); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_far_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_close_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int *val, int *val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9310_read_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9310_read_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9310_read_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9310_read_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9310_write_thresh(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int reg; |
| unsigned int regval; |
| int ret, i; |
| |
| reg = ret = sx9310_get_thresh_reg(chan->channel); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9310_pthresh_codes); i++) { |
| if (sx9310_pthresh_codes[i] == val) { |
| regval = i; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(sx9310_pthresh_codes)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, reg, |
| SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| } |
| |
| static int sx9310_write_hysteresis(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int _val) |
| { |
| unsigned int hyst, val = _val; |
| int ret, pthresh; |
| |
| ret = sx9310_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| if (val == 0) |
| hyst = 0; |
| else if (val == pthresh >> 2) |
| hyst = 3; |
| else if (val == pthresh >> 3) |
| hyst = 2; |
| else if (val == pthresh >> 4) |
| hyst = 1; |
| else |
| return -EINVAL; |
| |
| hyst = FIELD_PREP(SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); |
| } |
| |
| static int sx9310_write_far_debounce(struct sx_common_data *data, int val) |
| { |
| unsigned int regval; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, |
| regval); |
| } |
| |
| static int sx9310_write_close_debounce(struct sx_common_data *data, int val) |
| { |
| unsigned int regval; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val); |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, |
| regval); |
| } |
| |
| static int sx9310_write_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int val, int val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9310_write_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9310_write_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9310_write_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9310_write_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9310_set_samp_freq(struct sx_common_data *data, int val, int val2) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++) |
| if (val == sx9310_samp_freq_table[i].val && |
| val2 == sx9310_samp_freq_table[i].val2) |
| break; |
| |
| if (i == ARRAY_SIZE(sx9310_samp_freq_table)) |
| return -EINVAL; |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits( |
| data->regmap, SX9310_REG_PROX_CTRL0, |
| SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, |
| FIELD_PREP(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, i)); |
| } |
| |
| static int sx9310_write_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int gain, mask; |
| |
| gain = ilog2(val); |
| |
| switch (chan->channel) { |
| case 0: |
| case 3: |
| mask = SX9310_REG_PROX_CTRL3_GAIN0_MASK; |
| gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN0_MASK, gain); |
| break; |
| case 1: |
| case 2: |
| mask = SX9310_REG_PROX_CTRL3_GAIN12_MASK; |
| gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN12_MASK, gain); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| guard(mutex)(&data->mutex); |
| return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask, |
| gain); |
| } |
| |
| static int sx9310_write_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int val, int val2, |
| long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9310_set_samp_freq(data, val, val2); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return sx9310_write_gain(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct sx_common_reg_default sx9310_default_regs[] = { |
| { SX9310_REG_IRQ_MSK, 0x00 }, |
| { SX9310_REG_IRQ_FUNC, 0x00 }, |
| /* |
| * The lower 4 bits should not be set as it enable sensors measurements. |
| * Turning the detection on before the configuration values are set to |
| * good values can cause the device to return erroneous readings. |
| */ |
| { SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS }, |
| { SX9310_REG_PROX_CTRL1, 0x00 }, |
| { SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 | |
| SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC }, |
| { SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 | |
| SX9310_REG_PROX_CTRL3_GAIN12_X4 }, |
| { SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST }, |
| { SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL | |
| SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 | |
| SX9310_REG_PROX_CTRL5_RAWFILT_1P25 }, |
| { SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT }, |
| { SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 | |
| SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 }, |
| { SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 | |
| SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 }, |
| { SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 | |
| SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 }, |
| { SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT | |
| SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 }, |
| { SX9310_REG_PROX_CTRL11, 0x00 }, |
| { SX9310_REG_PROX_CTRL12, 0x00 }, |
| { SX9310_REG_PROX_CTRL13, 0x00 }, |
| { SX9310_REG_PROX_CTRL14, 0x00 }, |
| { SX9310_REG_PROX_CTRL15, 0x00 }, |
| { SX9310_REG_PROX_CTRL16, 0x00 }, |
| { SX9310_REG_PROX_CTRL17, 0x00 }, |
| { SX9310_REG_PROX_CTRL18, 0x00 }, |
| { SX9310_REG_PROX_CTRL19, 0x00 }, |
| { SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES | |
| SX9310_REG_SAR_CTRL0_SARHYST_8 }, |
| { SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) }, |
| { SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT }, |
| }; |
| |
| /* Activate all channels and perform an initial compensation. */ |
| static int sx9310_init_compensation(struct iio_dev *indio_dev) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| int ret; |
| unsigned int val; |
| unsigned int ctrl0; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0); |
| if (ret) |
| return ret; |
| |
| /* run the compensation phase on all channels */ |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, |
| ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val, |
| !(val & SX9310_REG_STAT1_COMPSTAT_MASK), |
| 20000, 2000000); |
| if (ret) |
| return ret; |
| |
| regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0); |
| return ret; |
| } |
| |
| static const struct sx_common_reg_default * |
| sx9310_get_default_reg(struct device *dev, int idx, |
| struct sx_common_reg_default *reg_def) |
| { |
| u32 combined[SX9310_NUM_CHANNELS]; |
| u32 start = 0, raw = 0, pos = 0; |
| unsigned long comb_mask = 0; |
| int ret, i, count; |
| const char *res; |
| |
| memcpy(reg_def, &sx9310_default_regs[idx], sizeof(*reg_def)); |
| switch (reg_def->reg) { |
| case SX9310_REG_PROX_CTRL2: |
| if (device_property_read_bool(dev, "semtech,cs0-ground")) { |
| reg_def->def &= ~SX9310_REG_PROX_CTRL2_SHIELDEN_MASK; |
| reg_def->def |= SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND; |
| } |
| |
| count = device_property_count_u32(dev, "semtech,combined-sensors"); |
| if (count < 0 || count > ARRAY_SIZE(combined)) |
| break; |
| ret = device_property_read_u32_array(dev, "semtech,combined-sensors", |
| combined, count); |
| if (ret) |
| break; |
| |
| for (i = 0; i < count; i++) |
| comb_mask |= BIT(combined[i]); |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK; |
| if (comb_mask == (BIT(3) | BIT(2) | BIT(1) | BIT(0))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3; |
| else if (comb_mask == (BIT(1) | BIT(2))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2; |
| else if (comb_mask == (BIT(0) | BIT(1))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1; |
| else if (comb_mask == BIT(3)) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS3; |
| |
| break; |
| case SX9310_REG_PROX_CTRL4: |
| ret = device_property_read_string(dev, "semtech,resolution", &res); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL4_RESOLUTION_MASK; |
| if (!strcmp(res, "coarsest")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST; |
| else if (!strcmp(res, "very-coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE; |
| else if (!strcmp(res, "coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE; |
| else if (!strcmp(res, "medium-coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE; |
| else if (!strcmp(res, "medium")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM; |
| else if (!strcmp(res, "fine")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINE; |
| else if (!strcmp(res, "very-fine")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE; |
| else if (!strcmp(res, "finest")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST; |
| |
| break; |
| case SX9310_REG_PROX_CTRL5: |
| ret = device_property_read_u32(dev, "semtech,startup-sensor", &start); |
| if (ret) { |
| start = FIELD_GET(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK, |
| reg_def->def); |
| } |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK, |
| start); |
| |
| ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw); |
| if (ret) { |
| raw = FIELD_GET(SX9310_REG_PROX_CTRL5_RAWFILT_MASK, |
| reg_def->def); |
| } else { |
| raw = ilog2(raw); |
| } |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL5_RAWFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_RAWFILT_MASK, |
| raw); |
| break; |
| case SX9310_REG_PROX_CTRL7: |
| ret = device_property_read_u32(dev, "semtech,avg-pos-strength", &pos); |
| if (ret) |
| break; |
| |
| /* Powers of 2, except for a gap between 16 and 64 */ |
| pos = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3); |
| reg_def->def &= ~SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK, |
| pos); |
| break; |
| } |
| |
| return reg_def; |
| } |
| |
| static int sx9310_check_whoami(struct device *dev, |
| struct iio_dev *indio_dev) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| const struct sx931x_info *ddata; |
| unsigned int whoami; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &whoami); |
| if (ret) |
| return ret; |
| |
| ddata = device_get_match_data(dev); |
| if (ddata->whoami != whoami) |
| return -ENODEV; |
| |
| indio_dev->name = ddata->name; |
| |
| return 0; |
| } |
| |
| static const struct sx_common_chip_info sx9310_chip_info = { |
| .reg_stat = SX9310_REG_STAT0, |
| .reg_irq_msk = SX9310_REG_IRQ_MSK, |
| .reg_enable_chan = SX9310_REG_PROX_CTRL0, |
| .reg_reset = SX9310_REG_RESET, |
| |
| .mask_enable_chan = SX9310_REG_STAT1_COMPSTAT_MASK, |
| .irq_msk_offset = 3, |
| .num_channels = SX9310_NUM_CHANNELS, |
| .num_default_regs = ARRAY_SIZE(sx9310_default_regs), |
| |
| .ops = { |
| .read_prox_data = sx9310_read_prox_data, |
| .check_whoami = sx9310_check_whoami, |
| .init_compensation = sx9310_init_compensation, |
| .wait_for_sample = sx9310_wait_for_sample, |
| .get_default_reg = sx9310_get_default_reg, |
| }, |
| |
| .iio_channels = sx9310_channels, |
| .num_iio_channels = ARRAY_SIZE(sx9310_channels), |
| .iio_info = { |
| .read_raw = sx9310_read_raw, |
| .read_avail = sx9310_read_avail, |
| .read_event_value = sx9310_read_event_val, |
| .write_event_value = sx9310_write_event_val, |
| .write_raw = sx9310_write_raw, |
| .read_event_config = sx_common_read_event_config, |
| .write_event_config = sx_common_write_event_config, |
| }, |
| }; |
| |
| static int sx9310_probe(struct i2c_client *client) |
| { |
| return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config); |
| } |
| |
| static int sx9310_suspend(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| u8 ctrl0; |
| int ret; |
| |
| disable_irq_nosync(data->client->irq); |
| |
| guard(mutex)(&data->mutex); |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, |
| &data->suspend_ctrl); |
| if (ret) |
| return ret; |
| |
| ctrl0 = data->suspend_ctrl & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK; |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0); |
| if (ret) |
| return ret; |
| |
| return regmap_write(data->regmap, SX9310_REG_PAUSE, 0); |
| } |
| |
| static int sx9310_resume(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| int ret; |
| |
| scoped_guard(mutex, &data->mutex) { |
| ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, |
| data->suspend_ctrl); |
| if (ret) |
| return ret; |
| } |
| |
| enable_irq(data->client->irq); |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume); |
| |
| static const struct sx931x_info sx9310_info = { |
| .name = "sx9310", |
| .whoami = SX9310_WHOAMI_VALUE, |
| }; |
| |
| static const struct sx931x_info sx9311_info = { |
| .name = "sx9311", |
| .whoami = SX9311_WHOAMI_VALUE, |
| }; |
| |
| static const struct acpi_device_id sx9310_acpi_match[] = { |
| { "STH9310", (kernel_ulong_t)&sx9310_info }, |
| { "STH9311", (kernel_ulong_t)&sx9311_info }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match); |
| |
| static const struct of_device_id sx9310_of_match[] = { |
| { .compatible = "semtech,sx9310", &sx9310_info }, |
| { .compatible = "semtech,sx9311", &sx9311_info }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, sx9310_of_match); |
| |
| static const struct i2c_device_id sx9310_id[] = { |
| { "sx9310", (kernel_ulong_t)&sx9310_info }, |
| { "sx9311", (kernel_ulong_t)&sx9311_info }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx9310_id); |
| |
| static struct i2c_driver sx9310_driver = { |
| .driver = { |
| .name = "sx9310", |
| .acpi_match_table = sx9310_acpi_match, |
| .of_match_table = sx9310_of_match, |
| .pm = pm_sleep_ptr(&sx9310_pm_ops), |
| |
| /* |
| * Lots of i2c transfers in probe + over 200 ms waiting in |
| * sx9310_init_compensation() mean a slow probe; prefer async |
| * so we don't delay boot if we're builtin to the kernel. |
| */ |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = sx9310_probe, |
| .id_table = sx9310_id, |
| }; |
| module_i2c_driver(sx9310_driver); |
| |
| MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); |
| MODULE_AUTHOR("Daniel Campello <campello@chromium.org>"); |
| MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(SEMTECH_PROX); |