| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/bio.h> |
| #include <linux/mm.h> |
| #include <linux/pagemap.h> |
| #include <linux/page-flags.h> |
| #include <linux/sched/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/blkdev.h> |
| #include <linux/swap.h> |
| #include <linux/writeback.h> |
| #include <linux/pagevec.h> |
| #include <linux/prefetch.h> |
| #include <linux/fsverity.h> |
| #include "extent_io.h" |
| #include "extent-io-tree.h" |
| #include "extent_map.h" |
| #include "ctree.h" |
| #include "btrfs_inode.h" |
| #include "bio.h" |
| #include "locking.h" |
| #include "backref.h" |
| #include "disk-io.h" |
| #include "subpage.h" |
| #include "zoned.h" |
| #include "block-group.h" |
| #include "compression.h" |
| #include "fs.h" |
| #include "accessors.h" |
| #include "file-item.h" |
| #include "file.h" |
| #include "dev-replace.h" |
| #include "super.h" |
| #include "transaction.h" |
| |
| static struct kmem_cache *extent_buffer_cache; |
| |
| #ifdef CONFIG_BTRFS_DEBUG |
| static inline void btrfs_leak_debug_add_eb(struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fs_info->eb_leak_lock, flags); |
| list_add(&eb->leak_list, &fs_info->allocated_ebs); |
| spin_unlock_irqrestore(&fs_info->eb_leak_lock, flags); |
| } |
| |
| static inline void btrfs_leak_debug_del_eb(struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fs_info->eb_leak_lock, flags); |
| list_del(&eb->leak_list); |
| spin_unlock_irqrestore(&fs_info->eb_leak_lock, flags); |
| } |
| |
| void btrfs_extent_buffer_leak_debug_check(struct btrfs_fs_info *fs_info) |
| { |
| struct extent_buffer *eb; |
| unsigned long flags; |
| |
| /* |
| * If we didn't get into open_ctree our allocated_ebs will not be |
| * initialized, so just skip this. |
| */ |
| if (!fs_info->allocated_ebs.next) |
| return; |
| |
| WARN_ON(!list_empty(&fs_info->allocated_ebs)); |
| spin_lock_irqsave(&fs_info->eb_leak_lock, flags); |
| while (!list_empty(&fs_info->allocated_ebs)) { |
| eb = list_first_entry(&fs_info->allocated_ebs, |
| struct extent_buffer, leak_list); |
| pr_err( |
| "BTRFS: buffer leak start %llu len %u refs %d bflags %lu owner %llu\n", |
| eb->start, eb->len, atomic_read(&eb->refs), eb->bflags, |
| btrfs_header_owner(eb)); |
| list_del(&eb->leak_list); |
| WARN_ON_ONCE(1); |
| kmem_cache_free(extent_buffer_cache, eb); |
| } |
| spin_unlock_irqrestore(&fs_info->eb_leak_lock, flags); |
| } |
| #else |
| #define btrfs_leak_debug_add_eb(eb) do {} while (0) |
| #define btrfs_leak_debug_del_eb(eb) do {} while (0) |
| #endif |
| |
| /* |
| * Structure to record info about the bio being assembled, and other info like |
| * how many bytes are there before stripe/ordered extent boundary. |
| */ |
| struct btrfs_bio_ctrl { |
| struct btrfs_bio *bbio; |
| enum btrfs_compression_type compress_type; |
| u32 len_to_oe_boundary; |
| blk_opf_t opf; |
| btrfs_bio_end_io_t end_io_func; |
| struct writeback_control *wbc; |
| }; |
| |
| static void submit_one_bio(struct btrfs_bio_ctrl *bio_ctrl) |
| { |
| struct btrfs_bio *bbio = bio_ctrl->bbio; |
| |
| if (!bbio) |
| return; |
| |
| /* Caller should ensure the bio has at least some range added */ |
| ASSERT(bbio->bio.bi_iter.bi_size); |
| |
| if (btrfs_op(&bbio->bio) == BTRFS_MAP_READ && |
| bio_ctrl->compress_type != BTRFS_COMPRESS_NONE) |
| btrfs_submit_compressed_read(bbio); |
| else |
| btrfs_submit_bio(bbio, 0); |
| |
| /* The bbio is owned by the end_io handler now */ |
| bio_ctrl->bbio = NULL; |
| } |
| |
| /* |
| * Submit or fail the current bio in the bio_ctrl structure. |
| */ |
| static void submit_write_bio(struct btrfs_bio_ctrl *bio_ctrl, int ret) |
| { |
| struct btrfs_bio *bbio = bio_ctrl->bbio; |
| |
| if (!bbio) |
| return; |
| |
| if (ret) { |
| ASSERT(ret < 0); |
| btrfs_bio_end_io(bbio, errno_to_blk_status(ret)); |
| /* The bio is owned by the end_io handler now */ |
| bio_ctrl->bbio = NULL; |
| } else { |
| submit_one_bio(bio_ctrl); |
| } |
| } |
| |
| int __init extent_buffer_init_cachep(void) |
| { |
| extent_buffer_cache = kmem_cache_create("btrfs_extent_buffer", |
| sizeof(struct extent_buffer), 0, 0, |
| NULL); |
| if (!extent_buffer_cache) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| void __cold extent_buffer_free_cachep(void) |
| { |
| /* |
| * Make sure all delayed rcu free are flushed before we |
| * destroy caches. |
| */ |
| rcu_barrier(); |
| kmem_cache_destroy(extent_buffer_cache); |
| } |
| |
| void extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end) |
| { |
| unsigned long index = start >> PAGE_SHIFT; |
| unsigned long end_index = end >> PAGE_SHIFT; |
| struct page *page; |
| |
| while (index <= end_index) { |
| page = find_get_page(inode->i_mapping, index); |
| BUG_ON(!page); /* Pages should be in the extent_io_tree */ |
| clear_page_dirty_for_io(page); |
| put_page(page); |
| index++; |
| } |
| } |
| |
| static void process_one_page(struct btrfs_fs_info *fs_info, |
| struct page *page, struct page *locked_page, |
| unsigned long page_ops, u64 start, u64 end) |
| { |
| struct folio *folio = page_folio(page); |
| u32 len; |
| |
| ASSERT(end + 1 - start != 0 && end + 1 - start < U32_MAX); |
| len = end + 1 - start; |
| |
| if (page_ops & PAGE_SET_ORDERED) |
| btrfs_folio_clamp_set_ordered(fs_info, folio, start, len); |
| if (page_ops & PAGE_START_WRITEBACK) { |
| btrfs_folio_clamp_clear_dirty(fs_info, folio, start, len); |
| btrfs_folio_clamp_set_writeback(fs_info, folio, start, len); |
| } |
| if (page_ops & PAGE_END_WRITEBACK) |
| btrfs_folio_clamp_clear_writeback(fs_info, folio, start, len); |
| |
| if (page != locked_page && (page_ops & PAGE_UNLOCK)) |
| btrfs_folio_end_writer_lock(fs_info, folio, start, len); |
| } |
| |
| static void __process_pages_contig(struct address_space *mapping, |
| struct page *locked_page, u64 start, u64 end, |
| unsigned long page_ops) |
| { |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(mapping->host); |
| pgoff_t start_index = start >> PAGE_SHIFT; |
| pgoff_t end_index = end >> PAGE_SHIFT; |
| pgoff_t index = start_index; |
| struct folio_batch fbatch; |
| int i; |
| |
| folio_batch_init(&fbatch); |
| while (index <= end_index) { |
| int found_folios; |
| |
| found_folios = filemap_get_folios_contig(mapping, &index, |
| end_index, &fbatch); |
| for (i = 0; i < found_folios; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| process_one_page(fs_info, &folio->page, locked_page, |
| page_ops, start, end); |
| } |
| folio_batch_release(&fbatch); |
| cond_resched(); |
| } |
| } |
| |
| static noinline void __unlock_for_delalloc(struct inode *inode, |
| struct page *locked_page, |
| u64 start, u64 end) |
| { |
| unsigned long index = start >> PAGE_SHIFT; |
| unsigned long end_index = end >> PAGE_SHIFT; |
| |
| ASSERT(locked_page); |
| if (index == locked_page->index && end_index == index) |
| return; |
| |
| __process_pages_contig(inode->i_mapping, locked_page, start, end, |
| PAGE_UNLOCK); |
| } |
| |
| static noinline int lock_delalloc_pages(struct inode *inode, |
| struct page *locked_page, |
| u64 start, |
| u64 end) |
| { |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); |
| struct address_space *mapping = inode->i_mapping; |
| pgoff_t start_index = start >> PAGE_SHIFT; |
| pgoff_t end_index = end >> PAGE_SHIFT; |
| pgoff_t index = start_index; |
| u64 processed_end = start; |
| struct folio_batch fbatch; |
| |
| if (index == locked_page->index && index == end_index) |
| return 0; |
| |
| folio_batch_init(&fbatch); |
| while (index <= end_index) { |
| unsigned int found_folios, i; |
| |
| found_folios = filemap_get_folios_contig(mapping, &index, |
| end_index, &fbatch); |
| if (found_folios == 0) |
| goto out; |
| |
| for (i = 0; i < found_folios; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| struct page *page = folio_page(folio, 0); |
| u32 len = end + 1 - start; |
| |
| if (page == locked_page) |
| continue; |
| |
| if (btrfs_folio_start_writer_lock(fs_info, folio, start, |
| len)) |
| goto out; |
| |
| if (!PageDirty(page) || page->mapping != mapping) { |
| btrfs_folio_end_writer_lock(fs_info, folio, start, |
| len); |
| goto out; |
| } |
| |
| processed_end = page_offset(page) + PAGE_SIZE - 1; |
| } |
| folio_batch_release(&fbatch); |
| cond_resched(); |
| } |
| |
| return 0; |
| out: |
| folio_batch_release(&fbatch); |
| if (processed_end > start) |
| __unlock_for_delalloc(inode, locked_page, start, processed_end); |
| return -EAGAIN; |
| } |
| |
| /* |
| * Find and lock a contiguous range of bytes in the file marked as delalloc, no |
| * more than @max_bytes. |
| * |
| * @start: The original start bytenr to search. |
| * Will store the extent range start bytenr. |
| * @end: The original end bytenr of the search range |
| * Will store the extent range end bytenr. |
| * |
| * Return true if we find a delalloc range which starts inside the original |
| * range, and @start/@end will store the delalloc range start/end. |
| * |
| * Return false if we can't find any delalloc range which starts inside the |
| * original range, and @start/@end will be the non-delalloc range start/end. |
| */ |
| EXPORT_FOR_TESTS |
| noinline_for_stack bool find_lock_delalloc_range(struct inode *inode, |
| struct page *locked_page, u64 *start, |
| u64 *end) |
| { |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); |
| struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree; |
| const u64 orig_start = *start; |
| const u64 orig_end = *end; |
| /* The sanity tests may not set a valid fs_info. */ |
| u64 max_bytes = fs_info ? fs_info->max_extent_size : BTRFS_MAX_EXTENT_SIZE; |
| u64 delalloc_start; |
| u64 delalloc_end; |
| bool found; |
| struct extent_state *cached_state = NULL; |
| int ret; |
| int loops = 0; |
| |
| /* Caller should pass a valid @end to indicate the search range end */ |
| ASSERT(orig_end > orig_start); |
| |
| /* The range should at least cover part of the page */ |
| ASSERT(!(orig_start >= page_offset(locked_page) + PAGE_SIZE || |
| orig_end <= page_offset(locked_page))); |
| again: |
| /* step one, find a bunch of delalloc bytes starting at start */ |
| delalloc_start = *start; |
| delalloc_end = 0; |
| found = btrfs_find_delalloc_range(tree, &delalloc_start, &delalloc_end, |
| max_bytes, &cached_state); |
| if (!found || delalloc_end <= *start || delalloc_start > orig_end) { |
| *start = delalloc_start; |
| |
| /* @delalloc_end can be -1, never go beyond @orig_end */ |
| *end = min(delalloc_end, orig_end); |
| free_extent_state(cached_state); |
| return false; |
| } |
| |
| /* |
| * start comes from the offset of locked_page. We have to lock |
| * pages in order, so we can't process delalloc bytes before |
| * locked_page |
| */ |
| if (delalloc_start < *start) |
| delalloc_start = *start; |
| |
| /* |
| * make sure to limit the number of pages we try to lock down |
| */ |
| if (delalloc_end + 1 - delalloc_start > max_bytes) |
| delalloc_end = delalloc_start + max_bytes - 1; |
| |
| /* step two, lock all the pages after the page that has start */ |
| ret = lock_delalloc_pages(inode, locked_page, |
| delalloc_start, delalloc_end); |
| ASSERT(!ret || ret == -EAGAIN); |
| if (ret == -EAGAIN) { |
| /* some of the pages are gone, lets avoid looping by |
| * shortening the size of the delalloc range we're searching |
| */ |
| free_extent_state(cached_state); |
| cached_state = NULL; |
| if (!loops) { |
| max_bytes = PAGE_SIZE; |
| loops = 1; |
| goto again; |
| } else { |
| found = false; |
| goto out_failed; |
| } |
| } |
| |
| /* step three, lock the state bits for the whole range */ |
| lock_extent(tree, delalloc_start, delalloc_end, &cached_state); |
| |
| /* then test to make sure it is all still delalloc */ |
| ret = test_range_bit(tree, delalloc_start, delalloc_end, |
| EXTENT_DELALLOC, cached_state); |
| if (!ret) { |
| unlock_extent(tree, delalloc_start, delalloc_end, |
| &cached_state); |
| __unlock_for_delalloc(inode, locked_page, |
| delalloc_start, delalloc_end); |
| cond_resched(); |
| goto again; |
| } |
| free_extent_state(cached_state); |
| *start = delalloc_start; |
| *end = delalloc_end; |
| out_failed: |
| return found; |
| } |
| |
| void extent_clear_unlock_delalloc(struct btrfs_inode *inode, u64 start, u64 end, |
| struct page *locked_page, |
| u32 clear_bits, unsigned long page_ops) |
| { |
| clear_extent_bit(&inode->io_tree, start, end, clear_bits, NULL); |
| |
| __process_pages_contig(inode->vfs_inode.i_mapping, locked_page, |
| start, end, page_ops); |
| } |
| |
| static bool btrfs_verify_page(struct page *page, u64 start) |
| { |
| if (!fsverity_active(page->mapping->host) || |
| PageUptodate(page) || |
| start >= i_size_read(page->mapping->host)) |
| return true; |
| return fsverity_verify_page(page); |
| } |
| |
| static void end_page_read(struct page *page, bool uptodate, u64 start, u32 len) |
| { |
| struct btrfs_fs_info *fs_info = page_to_fs_info(page); |
| struct folio *folio = page_folio(page); |
| |
| ASSERT(page_offset(page) <= start && |
| start + len <= page_offset(page) + PAGE_SIZE); |
| |
| if (uptodate && btrfs_verify_page(page, start)) |
| btrfs_folio_set_uptodate(fs_info, folio, start, len); |
| else |
| btrfs_folio_clear_uptodate(fs_info, folio, start, len); |
| |
| if (!btrfs_is_subpage(fs_info, page->mapping)) |
| unlock_page(page); |
| else |
| btrfs_subpage_end_reader(fs_info, folio, start, len); |
| } |
| |
| /* |
| * After a write IO is done, we need to: |
| * |
| * - clear the uptodate bits on error |
| * - clear the writeback bits in the extent tree for the range |
| * - filio_end_writeback() if there is no more pending io for the folio |
| * |
| * Scheduling is not allowed, so the extent state tree is expected |
| * to have one and only one object corresponding to this IO. |
| */ |
| static void end_bbio_data_write(struct btrfs_bio *bbio) |
| { |
| struct btrfs_fs_info *fs_info = bbio->fs_info; |
| struct bio *bio = &bbio->bio; |
| int error = blk_status_to_errno(bio->bi_status); |
| struct folio_iter fi; |
| const u32 sectorsize = fs_info->sectorsize; |
| |
| ASSERT(!bio_flagged(bio, BIO_CLONED)); |
| bio_for_each_folio_all(fi, bio) { |
| struct folio *folio = fi.folio; |
| u64 start = folio_pos(folio) + fi.offset; |
| u32 len = fi.length; |
| |
| /* Only order 0 (single page) folios are allowed for data. */ |
| ASSERT(folio_order(folio) == 0); |
| |
| /* Our read/write should always be sector aligned. */ |
| if (!IS_ALIGNED(fi.offset, sectorsize)) |
| btrfs_err(fs_info, |
| "partial page write in btrfs with offset %zu and length %zu", |
| fi.offset, fi.length); |
| else if (!IS_ALIGNED(fi.length, sectorsize)) |
| btrfs_info(fs_info, |
| "incomplete page write with offset %zu and length %zu", |
| fi.offset, fi.length); |
| |
| btrfs_finish_ordered_extent(bbio->ordered, |
| folio_page(folio, 0), start, len, !error); |
| if (error) |
| mapping_set_error(folio->mapping, error); |
| btrfs_folio_clear_writeback(fs_info, folio, start, len); |
| } |
| |
| bio_put(bio); |
| } |
| |
| /* |
| * Record previously processed extent range |
| * |
| * For endio_readpage_release_extent() to handle a full extent range, reducing |
| * the extent io operations. |
| */ |
| struct processed_extent { |
| struct btrfs_inode *inode; |
| /* Start of the range in @inode */ |
| u64 start; |
| /* End of the range in @inode */ |
| u64 end; |
| bool uptodate; |
| }; |
| |
| /* |
| * Try to release processed extent range |
| * |
| * May not release the extent range right now if the current range is |
| * contiguous to processed extent. |
| * |
| * Will release processed extent when any of @inode, @uptodate, the range is |
| * no longer contiguous to the processed range. |
| * |
| * Passing @inode == NULL will force processed extent to be released. |
| */ |
| static void endio_readpage_release_extent(struct processed_extent *processed, |
| struct btrfs_inode *inode, u64 start, u64 end, |
| bool uptodate) |
| { |
| struct extent_state *cached = NULL; |
| struct extent_io_tree *tree; |
| |
| /* The first extent, initialize @processed */ |
| if (!processed->inode) |
| goto update; |
| |
| /* |
| * Contiguous to processed extent, just uptodate the end. |
| * |
| * Several things to notice: |
| * |
| * - bio can be merged as long as on-disk bytenr is contiguous |
| * This means we can have page belonging to other inodes, thus need to |
| * check if the inode still matches. |
| * - bvec can contain range beyond current page for multi-page bvec |
| * Thus we need to do processed->end + 1 >= start check |
| */ |
| if (processed->inode == inode && processed->uptodate == uptodate && |
| processed->end + 1 >= start && end >= processed->end) { |
| processed->end = end; |
| return; |
| } |
| |
| tree = &processed->inode->io_tree; |
| /* |
| * Now we don't have range contiguous to the processed range, release |
| * the processed range now. |
| */ |
| unlock_extent(tree, processed->start, processed->end, &cached); |
| |
| update: |
| /* Update processed to current range */ |
| processed->inode = inode; |
| processed->start = start; |
| processed->end = end; |
| processed->uptodate = uptodate; |
| } |
| |
| static void begin_page_read(struct btrfs_fs_info *fs_info, struct page *page) |
| { |
| struct folio *folio = page_folio(page); |
| |
| ASSERT(folio_test_locked(folio)); |
| if (!btrfs_is_subpage(fs_info, folio->mapping)) |
| return; |
| |
| ASSERT(folio_test_private(folio)); |
| btrfs_subpage_start_reader(fs_info, folio, page_offset(page), PAGE_SIZE); |
| } |
| |
| /* |
| * After a data read IO is done, we need to: |
| * |
| * - clear the uptodate bits on error |
| * - set the uptodate bits if things worked |
| * - set the folio up to date if all extents in the tree are uptodate |
| * - clear the lock bit in the extent tree |
| * - unlock the folio if there are no other extents locked for it |
| * |
| * Scheduling is not allowed, so the extent state tree is expected |
| * to have one and only one object corresponding to this IO. |
| */ |
| static void end_bbio_data_read(struct btrfs_bio *bbio) |
| { |
| struct btrfs_fs_info *fs_info = bbio->fs_info; |
| struct bio *bio = &bbio->bio; |
| struct processed_extent processed = { 0 }; |
| struct folio_iter fi; |
| const u32 sectorsize = fs_info->sectorsize; |
| |
| ASSERT(!bio_flagged(bio, BIO_CLONED)); |
| bio_for_each_folio_all(fi, &bbio->bio) { |
| bool uptodate = !bio->bi_status; |
| struct folio *folio = fi.folio; |
| struct inode *inode = folio->mapping->host; |
| u64 start; |
| u64 end; |
| u32 len; |
| |
| /* For now only order 0 folios are supported for data. */ |
| ASSERT(folio_order(folio) == 0); |
| btrfs_debug(fs_info, |
| "%s: bi_sector=%llu, err=%d, mirror=%u", |
| __func__, bio->bi_iter.bi_sector, bio->bi_status, |
| bbio->mirror_num); |
| |
| /* |
| * We always issue full-sector reads, but if some block in a |
| * folio fails to read, blk_update_request() will advance |
| * bv_offset and adjust bv_len to compensate. Print a warning |
| * for unaligned offsets, and an error if they don't add up to |
| * a full sector. |
| */ |
| if (!IS_ALIGNED(fi.offset, sectorsize)) |
| btrfs_err(fs_info, |
| "partial page read in btrfs with offset %zu and length %zu", |
| fi.offset, fi.length); |
| else if (!IS_ALIGNED(fi.offset + fi.length, sectorsize)) |
| btrfs_info(fs_info, |
| "incomplete page read with offset %zu and length %zu", |
| fi.offset, fi.length); |
| |
| start = folio_pos(folio) + fi.offset; |
| end = start + fi.length - 1; |
| len = fi.length; |
| |
| if (likely(uptodate)) { |
| loff_t i_size = i_size_read(inode); |
| pgoff_t end_index = i_size >> folio_shift(folio); |
| |
| /* |
| * Zero out the remaining part if this range straddles |
| * i_size. |
| * |
| * Here we should only zero the range inside the folio, |
| * not touch anything else. |
| * |
| * NOTE: i_size is exclusive while end is inclusive. |
| */ |
| if (folio_index(folio) == end_index && i_size <= end) { |
| u32 zero_start = max(offset_in_folio(folio, i_size), |
| offset_in_folio(folio, start)); |
| u32 zero_len = offset_in_folio(folio, end) + 1 - |
| zero_start; |
| |
| folio_zero_range(folio, zero_start, zero_len); |
| } |
| } |
| |
| /* Update page status and unlock. */ |
| end_page_read(folio_page(folio, 0), uptodate, start, len); |
| endio_readpage_release_extent(&processed, BTRFS_I(inode), |
| start, end, uptodate); |
| } |
| /* Release the last extent */ |
| endio_readpage_release_extent(&processed, NULL, 0, 0, false); |
| bio_put(bio); |
| } |
| |
| /* |
| * Populate every free slot in a provided array with pages. |
| * |
| * @nr_pages: number of pages to allocate |
| * @page_array: the array to fill with pages; any existing non-null entries in |
| * the array will be skipped |
| * @extra_gfp: the extra GFP flags for the allocation. |
| * |
| * Return: 0 if all pages were able to be allocated; |
| * -ENOMEM otherwise, the partially allocated pages would be freed and |
| * the array slots zeroed |
| */ |
| int btrfs_alloc_page_array(unsigned int nr_pages, struct page **page_array, |
| gfp_t extra_gfp) |
| { |
| unsigned int allocated; |
| |
| for (allocated = 0; allocated < nr_pages;) { |
| unsigned int last = allocated; |
| |
| allocated = alloc_pages_bulk_array(GFP_NOFS | extra_gfp, |
| nr_pages, page_array); |
| |
| if (allocated == nr_pages) |
| return 0; |
| |
| /* |
| * During this iteration, no page could be allocated, even |
| * though alloc_pages_bulk_array() falls back to alloc_page() |
| * if it could not bulk-allocate. So we must be out of memory. |
| */ |
| if (allocated == last) { |
| for (int i = 0; i < allocated; i++) { |
| __free_page(page_array[i]); |
| page_array[i] = NULL; |
| } |
| return -ENOMEM; |
| } |
| |
| memalloc_retry_wait(GFP_NOFS); |
| } |
| return 0; |
| } |
| |
| /* |
| * Populate needed folios for the extent buffer. |
| * |
| * For now, the folios populated are always in order 0 (aka, single page). |
| */ |
| static int alloc_eb_folio_array(struct extent_buffer *eb, gfp_t extra_gfp) |
| { |
| struct page *page_array[INLINE_EXTENT_BUFFER_PAGES] = { 0 }; |
| int num_pages = num_extent_pages(eb); |
| int ret; |
| |
| ret = btrfs_alloc_page_array(num_pages, page_array, extra_gfp); |
| if (ret < 0) |
| return ret; |
| |
| for (int i = 0; i < num_pages; i++) |
| eb->folios[i] = page_folio(page_array[i]); |
| eb->folio_size = PAGE_SIZE; |
| eb->folio_shift = PAGE_SHIFT; |
| return 0; |
| } |
| |
| static bool btrfs_bio_is_contig(struct btrfs_bio_ctrl *bio_ctrl, |
| struct page *page, u64 disk_bytenr, |
| unsigned int pg_offset) |
| { |
| struct bio *bio = &bio_ctrl->bbio->bio; |
| struct bio_vec *bvec = bio_last_bvec_all(bio); |
| const sector_t sector = disk_bytenr >> SECTOR_SHIFT; |
| |
| if (bio_ctrl->compress_type != BTRFS_COMPRESS_NONE) { |
| /* |
| * For compression, all IO should have its logical bytenr set |
| * to the starting bytenr of the compressed extent. |
| */ |
| return bio->bi_iter.bi_sector == sector; |
| } |
| |
| /* |
| * The contig check requires the following conditions to be met: |
| * |
| * 1) The pages are belonging to the same inode |
| * This is implied by the call chain. |
| * |
| * 2) The range has adjacent logical bytenr |
| * |
| * 3) The range has adjacent file offset |
| * This is required for the usage of btrfs_bio->file_offset. |
| */ |
| return bio_end_sector(bio) == sector && |
| page_offset(bvec->bv_page) + bvec->bv_offset + bvec->bv_len == |
| page_offset(page) + pg_offset; |
| } |
| |
| static void alloc_new_bio(struct btrfs_inode *inode, |
| struct btrfs_bio_ctrl *bio_ctrl, |
| u64 disk_bytenr, u64 file_offset) |
| { |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; |
| struct btrfs_bio *bbio; |
| |
| bbio = btrfs_bio_alloc(BIO_MAX_VECS, bio_ctrl->opf, fs_info, |
| bio_ctrl->end_io_func, NULL); |
| bbio->bio.bi_iter.bi_sector = disk_bytenr >> SECTOR_SHIFT; |
| bbio->inode = inode; |
| bbio->file_offset = file_offset; |
| bio_ctrl->bbio = bbio; |
| bio_ctrl->len_to_oe_boundary = U32_MAX; |
| |
| /* Limit data write bios to the ordered boundary. */ |
| if (bio_ctrl->wbc) { |
| struct btrfs_ordered_extent *ordered; |
| |
| ordered = btrfs_lookup_ordered_extent(inode, file_offset); |
| if (ordered) { |
| bio_ctrl->len_to_oe_boundary = min_t(u32, U32_MAX, |
| ordered->file_offset + |
| ordered->disk_num_bytes - file_offset); |
| bbio->ordered = ordered; |
| } |
| |
| /* |
| * Pick the last added device to support cgroup writeback. For |
| * multi-device file systems this means blk-cgroup policies have |
| * to always be set on the last added/replaced device. |
| * This is a bit odd but has been like that for a long time. |
| */ |
| bio_set_dev(&bbio->bio, fs_info->fs_devices->latest_dev->bdev); |
| wbc_init_bio(bio_ctrl->wbc, &bbio->bio); |
| } |
| } |
| |
| /* |
| * @disk_bytenr: logical bytenr where the write will be |
| * @page: page to add to the bio |
| * @size: portion of page that we want to write to |
| * @pg_offset: offset of the new bio or to check whether we are adding |
| * a contiguous page to the previous one |
| * |
| * The will either add the page into the existing @bio_ctrl->bbio, or allocate a |
| * new one in @bio_ctrl->bbio. |
| * The mirror number for this IO should already be initizlied in |
| * @bio_ctrl->mirror_num. |
| */ |
| static void submit_extent_page(struct btrfs_bio_ctrl *bio_ctrl, |
| u64 disk_bytenr, struct page *page, |
| size_t size, unsigned long pg_offset) |
| { |
| struct btrfs_inode *inode = page_to_inode(page); |
| |
| ASSERT(pg_offset + size <= PAGE_SIZE); |
| ASSERT(bio_ctrl->end_io_func); |
| |
| if (bio_ctrl->bbio && |
| !btrfs_bio_is_contig(bio_ctrl, page, disk_bytenr, pg_offset)) |
| submit_one_bio(bio_ctrl); |
| |
| do { |
| u32 len = size; |
| |
| /* Allocate new bio if needed */ |
| if (!bio_ctrl->bbio) { |
| alloc_new_bio(inode, bio_ctrl, disk_bytenr, |
| page_offset(page) + pg_offset); |
| } |
| |
| /* Cap to the current ordered extent boundary if there is one. */ |
| if (len > bio_ctrl->len_to_oe_boundary) { |
| ASSERT(bio_ctrl->compress_type == BTRFS_COMPRESS_NONE); |
| ASSERT(is_data_inode(&inode->vfs_inode)); |
| len = bio_ctrl->len_to_oe_boundary; |
| } |
| |
| if (bio_add_page(&bio_ctrl->bbio->bio, page, len, pg_offset) != len) { |
| /* bio full: move on to a new one */ |
| submit_one_bio(bio_ctrl); |
| continue; |
| } |
| |
| if (bio_ctrl->wbc) |
| wbc_account_cgroup_owner(bio_ctrl->wbc, page, len); |
| |
| size -= len; |
| pg_offset += len; |
| disk_bytenr += len; |
| |
| /* |
| * len_to_oe_boundary defaults to U32_MAX, which isn't page or |
| * sector aligned. alloc_new_bio() then sets it to the end of |
| * our ordered extent for writes into zoned devices. |
| * |
| * When len_to_oe_boundary is tracking an ordered extent, we |
| * trust the ordered extent code to align things properly, and |
| * the check above to cap our write to the ordered extent |
| * boundary is correct. |
| * |
| * When len_to_oe_boundary is U32_MAX, the cap above would |
| * result in a 4095 byte IO for the last page right before |
| * we hit the bio limit of UINT_MAX. bio_add_page() has all |
| * the checks required to make sure we don't overflow the bio, |
| * and we should just ignore len_to_oe_boundary completely |
| * unless we're using it to track an ordered extent. |
| * |
| * It's pretty hard to make a bio sized U32_MAX, but it can |
| * happen when the page cache is able to feed us contiguous |
| * pages for large extents. |
| */ |
| if (bio_ctrl->len_to_oe_boundary != U32_MAX) |
| bio_ctrl->len_to_oe_boundary -= len; |
| |
| /* Ordered extent boundary: move on to a new bio. */ |
| if (bio_ctrl->len_to_oe_boundary == 0) |
| submit_one_bio(bio_ctrl); |
| } while (size); |
| } |
| |
| static int attach_extent_buffer_folio(struct extent_buffer *eb, |
| struct folio *folio, |
| struct btrfs_subpage *prealloc) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| int ret = 0; |
| |
| /* |
| * If the page is mapped to btree inode, we should hold the private |
| * lock to prevent race. |
| * For cloned or dummy extent buffers, their pages are not mapped and |
| * will not race with any other ebs. |
| */ |
| if (folio->mapping) |
| lockdep_assert_held(&folio->mapping->i_private_lock); |
| |
| if (fs_info->nodesize >= PAGE_SIZE) { |
| if (!folio_test_private(folio)) |
| folio_attach_private(folio, eb); |
| else |
| WARN_ON(folio_get_private(folio) != eb); |
| return 0; |
| } |
| |
| /* Already mapped, just free prealloc */ |
| if (folio_test_private(folio)) { |
| btrfs_free_subpage(prealloc); |
| return 0; |
| } |
| |
| if (prealloc) |
| /* Has preallocated memory for subpage */ |
| folio_attach_private(folio, prealloc); |
| else |
| /* Do new allocation to attach subpage */ |
| ret = btrfs_attach_subpage(fs_info, folio, BTRFS_SUBPAGE_METADATA); |
| return ret; |
| } |
| |
| int set_page_extent_mapped(struct page *page) |
| { |
| return set_folio_extent_mapped(page_folio(page)); |
| } |
| |
| int set_folio_extent_mapped(struct folio *folio) |
| { |
| struct btrfs_fs_info *fs_info; |
| |
| ASSERT(folio->mapping); |
| |
| if (folio_test_private(folio)) |
| return 0; |
| |
| fs_info = folio_to_fs_info(folio); |
| |
| if (btrfs_is_subpage(fs_info, folio->mapping)) |
| return btrfs_attach_subpage(fs_info, folio, BTRFS_SUBPAGE_DATA); |
| |
| folio_attach_private(folio, (void *)EXTENT_FOLIO_PRIVATE); |
| return 0; |
| } |
| |
| void clear_page_extent_mapped(struct page *page) |
| { |
| struct folio *folio = page_folio(page); |
| struct btrfs_fs_info *fs_info; |
| |
| ASSERT(page->mapping); |
| |
| if (!folio_test_private(folio)) |
| return; |
| |
| fs_info = page_to_fs_info(page); |
| if (btrfs_is_subpage(fs_info, page->mapping)) |
| return btrfs_detach_subpage(fs_info, folio); |
| |
| folio_detach_private(folio); |
| } |
| |
| static struct extent_map *__get_extent_map(struct inode *inode, struct page *page, |
| u64 start, u64 len, struct extent_map **em_cached) |
| { |
| struct extent_map *em; |
| |
| ASSERT(em_cached); |
| |
| if (*em_cached) { |
| em = *em_cached; |
| if (extent_map_in_tree(em) && start >= em->start && |
| start < extent_map_end(em)) { |
| refcount_inc(&em->refs); |
| return em; |
| } |
| |
| free_extent_map(em); |
| *em_cached = NULL; |
| } |
| |
| em = btrfs_get_extent(BTRFS_I(inode), page, start, len); |
| if (!IS_ERR(em)) { |
| BUG_ON(*em_cached); |
| refcount_inc(&em->refs); |
| *em_cached = em; |
| } |
| return em; |
| } |
| /* |
| * basic readpage implementation. Locked extent state structs are inserted |
| * into the tree that are removed when the IO is done (by the end_io |
| * handlers) |
| * XXX JDM: This needs looking at to ensure proper page locking |
| * return 0 on success, otherwise return error |
| */ |
| static int btrfs_do_readpage(struct page *page, struct extent_map **em_cached, |
| struct btrfs_bio_ctrl *bio_ctrl, u64 *prev_em_start) |
| { |
| struct inode *inode = page->mapping->host; |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); |
| u64 start = page_offset(page); |
| const u64 end = start + PAGE_SIZE - 1; |
| u64 cur = start; |
| u64 extent_offset; |
| u64 last_byte = i_size_read(inode); |
| u64 block_start; |
| struct extent_map *em; |
| int ret = 0; |
| size_t pg_offset = 0; |
| size_t iosize; |
| size_t blocksize = fs_info->sectorsize; |
| struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree; |
| |
| ret = set_page_extent_mapped(page); |
| if (ret < 0) { |
| unlock_extent(tree, start, end, NULL); |
| unlock_page(page); |
| return ret; |
| } |
| |
| if (page->index == last_byte >> PAGE_SHIFT) { |
| size_t zero_offset = offset_in_page(last_byte); |
| |
| if (zero_offset) { |
| iosize = PAGE_SIZE - zero_offset; |
| memzero_page(page, zero_offset, iosize); |
| } |
| } |
| bio_ctrl->end_io_func = end_bbio_data_read; |
| begin_page_read(fs_info, page); |
| while (cur <= end) { |
| enum btrfs_compression_type compress_type = BTRFS_COMPRESS_NONE; |
| bool force_bio_submit = false; |
| u64 disk_bytenr; |
| |
| ASSERT(IS_ALIGNED(cur, fs_info->sectorsize)); |
| if (cur >= last_byte) { |
| iosize = PAGE_SIZE - pg_offset; |
| memzero_page(page, pg_offset, iosize); |
| unlock_extent(tree, cur, cur + iosize - 1, NULL); |
| end_page_read(page, true, cur, iosize); |
| break; |
| } |
| em = __get_extent_map(inode, page, cur, end - cur + 1, em_cached); |
| if (IS_ERR(em)) { |
| unlock_extent(tree, cur, end, NULL); |
| end_page_read(page, false, cur, end + 1 - cur); |
| return PTR_ERR(em); |
| } |
| extent_offset = cur - em->start; |
| BUG_ON(extent_map_end(em) <= cur); |
| BUG_ON(end < cur); |
| |
| compress_type = extent_map_compression(em); |
| |
| iosize = min(extent_map_end(em) - cur, end - cur + 1); |
| iosize = ALIGN(iosize, blocksize); |
| if (compress_type != BTRFS_COMPRESS_NONE) |
| disk_bytenr = em->block_start; |
| else |
| disk_bytenr = em->block_start + extent_offset; |
| block_start = em->block_start; |
| if (em->flags & EXTENT_FLAG_PREALLOC) |
| block_start = EXTENT_MAP_HOLE; |
| |
| /* |
| * If we have a file range that points to a compressed extent |
| * and it's followed by a consecutive file range that points |
| * to the same compressed extent (possibly with a different |
| * offset and/or length, so it either points to the whole extent |
| * or only part of it), we must make sure we do not submit a |
| * single bio to populate the pages for the 2 ranges because |
| * this makes the compressed extent read zero out the pages |
| * belonging to the 2nd range. Imagine the following scenario: |
| * |
| * File layout |
| * [0 - 8K] [8K - 24K] |
| * | | |
| * | | |
| * points to extent X, points to extent X, |
| * offset 4K, length of 8K offset 0, length 16K |
| * |
| * [extent X, compressed length = 4K uncompressed length = 16K] |
| * |
| * If the bio to read the compressed extent covers both ranges, |
| * it will decompress extent X into the pages belonging to the |
| * first range and then it will stop, zeroing out the remaining |
| * pages that belong to the other range that points to extent X. |
| * So here we make sure we submit 2 bios, one for the first |
| * range and another one for the third range. Both will target |
| * the same physical extent from disk, but we can't currently |
| * make the compressed bio endio callback populate the pages |
| * for both ranges because each compressed bio is tightly |
| * coupled with a single extent map, and each range can have |
| * an extent map with a different offset value relative to the |
| * uncompressed data of our extent and different lengths. This |
| * is a corner case so we prioritize correctness over |
| * non-optimal behavior (submitting 2 bios for the same extent). |
| */ |
| if (compress_type != BTRFS_COMPRESS_NONE && |
| prev_em_start && *prev_em_start != (u64)-1 && |
| *prev_em_start != em->start) |
| force_bio_submit = true; |
| |
| if (prev_em_start) |
| *prev_em_start = em->start; |
| |
| free_extent_map(em); |
| em = NULL; |
| |
| /* we've found a hole, just zero and go on */ |
| if (block_start == EXTENT_MAP_HOLE) { |
| memzero_page(page, pg_offset, iosize); |
| |
| unlock_extent(tree, cur, cur + iosize - 1, NULL); |
| end_page_read(page, true, cur, iosize); |
| cur = cur + iosize; |
| pg_offset += iosize; |
| continue; |
| } |
| /* the get_extent function already copied into the page */ |
| if (block_start == EXTENT_MAP_INLINE) { |
| unlock_extent(tree, cur, cur + iosize - 1, NULL); |
| end_page_read(page, true, cur, iosize); |
| cur = cur + iosize; |
| pg_offset += iosize; |
| continue; |
| } |
| |
| if (bio_ctrl->compress_type != compress_type) { |
| submit_one_bio(bio_ctrl); |
| bio_ctrl->compress_type = compress_type; |
| } |
| |
| if (force_bio_submit) |
| submit_one_bio(bio_ctrl); |
| submit_extent_page(bio_ctrl, disk_bytenr, page, iosize, |
| pg_offset); |
| cur = cur + iosize; |
| pg_offset += iosize; |
| } |
| |
| return 0; |
| } |
| |
| int btrfs_read_folio(struct file *file, struct folio *folio) |
| { |
| struct page *page = &folio->page; |
| struct btrfs_inode *inode = page_to_inode(page); |
| u64 start = page_offset(page); |
| u64 end = start + PAGE_SIZE - 1; |
| struct btrfs_bio_ctrl bio_ctrl = { .opf = REQ_OP_READ }; |
| struct extent_map *em_cached = NULL; |
| int ret; |
| |
| btrfs_lock_and_flush_ordered_range(inode, start, end, NULL); |
| |
| ret = btrfs_do_readpage(page, &em_cached, &bio_ctrl, NULL); |
| free_extent_map(em_cached); |
| |
| /* |
| * If btrfs_do_readpage() failed we will want to submit the assembled |
| * bio to do the cleanup. |
| */ |
| submit_one_bio(&bio_ctrl); |
| return ret; |
| } |
| |
| static inline void contiguous_readpages(struct page *pages[], int nr_pages, |
| u64 start, u64 end, |
| struct extent_map **em_cached, |
| struct btrfs_bio_ctrl *bio_ctrl, |
| u64 *prev_em_start) |
| { |
| struct btrfs_inode *inode = page_to_inode(pages[0]); |
| int index; |
| |
| ASSERT(em_cached); |
| |
| btrfs_lock_and_flush_ordered_range(inode, start, end, NULL); |
| |
| for (index = 0; index < nr_pages; index++) { |
| btrfs_do_readpage(pages[index], em_cached, bio_ctrl, |
| prev_em_start); |
| put_page(pages[index]); |
| } |
| } |
| |
| /* |
| * helper for __extent_writepage, doing all of the delayed allocation setup. |
| * |
| * This returns 1 if btrfs_run_delalloc_range function did all the work required |
| * to write the page (copy into inline extent). In this case the IO has |
| * been started and the page is already unlocked. |
| * |
| * This returns 0 if all went well (page still locked) |
| * This returns < 0 if there were errors (page still locked) |
| */ |
| static noinline_for_stack int writepage_delalloc(struct btrfs_inode *inode, |
| struct page *page, struct writeback_control *wbc) |
| { |
| const u64 page_start = page_offset(page); |
| const u64 page_end = page_start + PAGE_SIZE - 1; |
| u64 delalloc_start = page_start; |
| u64 delalloc_end = page_end; |
| u64 delalloc_to_write = 0; |
| int ret = 0; |
| |
| while (delalloc_start < page_end) { |
| delalloc_end = page_end; |
| if (!find_lock_delalloc_range(&inode->vfs_inode, page, |
| &delalloc_start, &delalloc_end)) { |
| delalloc_start = delalloc_end + 1; |
| continue; |
| } |
| |
| ret = btrfs_run_delalloc_range(inode, page, delalloc_start, |
| delalloc_end, wbc); |
| if (ret < 0) |
| return ret; |
| |
| delalloc_start = delalloc_end + 1; |
| } |
| |
| /* |
| * delalloc_end is already one less than the total length, so |
| * we don't subtract one from PAGE_SIZE |
| */ |
| delalloc_to_write += |
| DIV_ROUND_UP(delalloc_end + 1 - page_start, PAGE_SIZE); |
| |
| /* |
| * If btrfs_run_dealloc_range() already started I/O and unlocked |
| * the pages, we just need to account for them here. |
| */ |
| if (ret == 1) { |
| wbc->nr_to_write -= delalloc_to_write; |
| return 1; |
| } |
| |
| if (wbc->nr_to_write < delalloc_to_write) { |
| int thresh = 8192; |
| |
| if (delalloc_to_write < thresh * 2) |
| thresh = delalloc_to_write; |
| wbc->nr_to_write = min_t(u64, delalloc_to_write, |
| thresh); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Find the first byte we need to write. |
| * |
| * For subpage, one page can contain several sectors, and |
| * __extent_writepage_io() will just grab all extent maps in the page |
| * range and try to submit all non-inline/non-compressed extents. |
| * |
| * This is a big problem for subpage, we shouldn't re-submit already written |
| * data at all. |
| * This function will lookup subpage dirty bit to find which range we really |
| * need to submit. |
| * |
| * Return the next dirty range in [@start, @end). |
| * If no dirty range is found, @start will be page_offset(page) + PAGE_SIZE. |
| */ |
| static void find_next_dirty_byte(struct btrfs_fs_info *fs_info, |
| struct page *page, u64 *start, u64 *end) |
| { |
| struct folio *folio = page_folio(page); |
| struct btrfs_subpage *subpage = folio_get_private(folio); |
| struct btrfs_subpage_info *spi = fs_info->subpage_info; |
| u64 orig_start = *start; |
| /* Declare as unsigned long so we can use bitmap ops */ |
| unsigned long flags; |
| int range_start_bit; |
| int range_end_bit; |
| |
| /* |
| * For regular sector size == page size case, since one page only |
| * contains one sector, we return the page offset directly. |
| */ |
| if (!btrfs_is_subpage(fs_info, page->mapping)) { |
| *start = page_offset(page); |
| *end = page_offset(page) + PAGE_SIZE; |
| return; |
| } |
| |
| range_start_bit = spi->dirty_offset + |
| (offset_in_page(orig_start) >> fs_info->sectorsize_bits); |
| |
| /* We should have the page locked, but just in case */ |
| spin_lock_irqsave(&subpage->lock, flags); |
| bitmap_next_set_region(subpage->bitmaps, &range_start_bit, &range_end_bit, |
| spi->dirty_offset + spi->bitmap_nr_bits); |
| spin_unlock_irqrestore(&subpage->lock, flags); |
| |
| range_start_bit -= spi->dirty_offset; |
| range_end_bit -= spi->dirty_offset; |
| |
| *start = page_offset(page) + range_start_bit * fs_info->sectorsize; |
| *end = page_offset(page) + range_end_bit * fs_info->sectorsize; |
| } |
| |
| /* |
| * helper for __extent_writepage. This calls the writepage start hooks, |
| * and does the loop to map the page into extents and bios. |
| * |
| * We return 1 if the IO is started and the page is unlocked, |
| * 0 if all went well (page still locked) |
| * < 0 if there were errors (page still locked) |
| */ |
| static noinline_for_stack int __extent_writepage_io(struct btrfs_inode *inode, |
| struct page *page, |
| struct btrfs_bio_ctrl *bio_ctrl, |
| loff_t i_size, |
| int *nr_ret) |
| { |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; |
| u64 cur = page_offset(page); |
| u64 end = cur + PAGE_SIZE - 1; |
| u64 extent_offset; |
| u64 block_start; |
| struct extent_map *em; |
| int ret = 0; |
| int nr = 0; |
| |
| ret = btrfs_writepage_cow_fixup(page); |
| if (ret) { |
| /* Fixup worker will requeue */ |
| redirty_page_for_writepage(bio_ctrl->wbc, page); |
| unlock_page(page); |
| return 1; |
| } |
| |
| bio_ctrl->end_io_func = end_bbio_data_write; |
| while (cur <= end) { |
| u32 len = end - cur + 1; |
| u64 disk_bytenr; |
| u64 em_end; |
| u64 dirty_range_start = cur; |
| u64 dirty_range_end; |
| u32 iosize; |
| |
| if (cur >= i_size) { |
| btrfs_mark_ordered_io_finished(inode, page, cur, len, |
| true); |
| /* |
| * This range is beyond i_size, thus we don't need to |
| * bother writing back. |
| * But we still need to clear the dirty subpage bit, or |
| * the next time the page gets dirtied, we will try to |
| * writeback the sectors with subpage dirty bits, |
| * causing writeback without ordered extent. |
| */ |
| btrfs_folio_clear_dirty(fs_info, page_folio(page), cur, len); |
| break; |
| } |
| |
| find_next_dirty_byte(fs_info, page, &dirty_range_start, |
| &dirty_range_end); |
| if (cur < dirty_range_start) { |
| cur = dirty_range_start; |
| continue; |
| } |
| |
| em = btrfs_get_extent(inode, NULL, cur, len); |
| if (IS_ERR(em)) { |
| ret = PTR_ERR_OR_ZERO(em); |
| goto out_error; |
| } |
| |
| extent_offset = cur - em->start; |
| em_end = extent_map_end(em); |
| ASSERT(cur <= em_end); |
| ASSERT(cur < end); |
| ASSERT(IS_ALIGNED(em->start, fs_info->sectorsize)); |
| ASSERT(IS_ALIGNED(em->len, fs_info->sectorsize)); |
| |
| block_start = em->block_start; |
| disk_bytenr = em->block_start + extent_offset; |
| |
| ASSERT(!extent_map_is_compressed(em)); |
| ASSERT(block_start != EXTENT_MAP_HOLE); |
| ASSERT(block_start != EXTENT_MAP_INLINE); |
| |
| /* |
| * Note that em_end from extent_map_end() and dirty_range_end from |
| * find_next_dirty_byte() are all exclusive |
| */ |
| iosize = min(min(em_end, end + 1), dirty_range_end) - cur; |
| free_extent_map(em); |
| em = NULL; |
| |
| btrfs_set_range_writeback(inode, cur, cur + iosize - 1); |
| if (!PageWriteback(page)) { |
| btrfs_err(inode->root->fs_info, |
| "page %lu not writeback, cur %llu end %llu", |
| page->index, cur, end); |
| } |
| |
| /* |
| * Although the PageDirty bit is cleared before entering this |
| * function, subpage dirty bit is not cleared. |
| * So clear subpage dirty bit here so next time we won't submit |
| * page for range already written to disk. |
| */ |
| btrfs_folio_clear_dirty(fs_info, page_folio(page), cur, iosize); |
| |
| submit_extent_page(bio_ctrl, disk_bytenr, page, iosize, |
| cur - page_offset(page)); |
| cur += iosize; |
| nr++; |
| } |
| |
| btrfs_folio_assert_not_dirty(fs_info, page_folio(page)); |
| *nr_ret = nr; |
| return 0; |
| |
| out_error: |
| /* |
| * If we finish without problem, we should not only clear page dirty, |
| * but also empty subpage dirty bits |
| */ |
| *nr_ret = nr; |
| return ret; |
| } |
| |
| /* |
| * the writepage semantics are similar to regular writepage. extent |
| * records are inserted to lock ranges in the tree, and as dirty areas |
| * are found, they are marked writeback. Then the lock bits are removed |
| * and the end_io handler clears the writeback ranges |
| * |
| * Return 0 if everything goes well. |
| * Return <0 for error. |
| */ |
| static int __extent_writepage(struct page *page, struct btrfs_bio_ctrl *bio_ctrl) |
| { |
| struct folio *folio = page_folio(page); |
| struct inode *inode = page->mapping->host; |
| const u64 page_start = page_offset(page); |
| int ret; |
| int nr = 0; |
| size_t pg_offset; |
| loff_t i_size = i_size_read(inode); |
| unsigned long end_index = i_size >> PAGE_SHIFT; |
| |
| trace___extent_writepage(page, inode, bio_ctrl->wbc); |
| |
| WARN_ON(!PageLocked(page)); |
| |
| pg_offset = offset_in_page(i_size); |
| if (page->index > end_index || |
| (page->index == end_index && !pg_offset)) { |
| folio_invalidate(folio, 0, folio_size(folio)); |
| folio_unlock(folio); |
| return 0; |
| } |
| |
| if (page->index == end_index) |
| memzero_page(page, pg_offset, PAGE_SIZE - pg_offset); |
| |
| ret = set_page_extent_mapped(page); |
| if (ret < 0) |
| goto done; |
| |
| ret = writepage_delalloc(BTRFS_I(inode), page, bio_ctrl->wbc); |
| if (ret == 1) |
| return 0; |
| if (ret) |
| goto done; |
| |
| ret = __extent_writepage_io(BTRFS_I(inode), page, bio_ctrl, i_size, &nr); |
| if (ret == 1) |
| return 0; |
| |
| bio_ctrl->wbc->nr_to_write--; |
| |
| done: |
| if (nr == 0) { |
| /* make sure the mapping tag for page dirty gets cleared */ |
| set_page_writeback(page); |
| end_page_writeback(page); |
| } |
| if (ret) { |
| btrfs_mark_ordered_io_finished(BTRFS_I(inode), page, page_start, |
| PAGE_SIZE, !ret); |
| mapping_set_error(page->mapping, ret); |
| } |
| unlock_page(page); |
| ASSERT(ret <= 0); |
| return ret; |
| } |
| |
| void wait_on_extent_buffer_writeback(struct extent_buffer *eb) |
| { |
| wait_on_bit_io(&eb->bflags, EXTENT_BUFFER_WRITEBACK, |
| TASK_UNINTERRUPTIBLE); |
| } |
| |
| /* |
| * Lock extent buffer status and pages for writeback. |
| * |
| * Return %false if the extent buffer doesn't need to be submitted (e.g. the |
| * extent buffer is not dirty) |
| * Return %true is the extent buffer is submitted to bio. |
| */ |
| static noinline_for_stack bool lock_extent_buffer_for_io(struct extent_buffer *eb, |
| struct writeback_control *wbc) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| bool ret = false; |
| |
| btrfs_tree_lock(eb); |
| while (test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags)) { |
| btrfs_tree_unlock(eb); |
| if (wbc->sync_mode != WB_SYNC_ALL) |
| return false; |
| wait_on_extent_buffer_writeback(eb); |
| btrfs_tree_lock(eb); |
| } |
| |
| /* |
| * We need to do this to prevent races in people who check if the eb is |
| * under IO since we can end up having no IO bits set for a short period |
| * of time. |
| */ |
| spin_lock(&eb->refs_lock); |
| if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) { |
| set_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags); |
| spin_unlock(&eb->refs_lock); |
| btrfs_set_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN); |
| percpu_counter_add_batch(&fs_info->dirty_metadata_bytes, |
| -eb->len, |
| fs_info->dirty_metadata_batch); |
| ret = true; |
| } else { |
| spin_unlock(&eb->refs_lock); |
| } |
| btrfs_tree_unlock(eb); |
| return ret; |
| } |
| |
| static void set_btree_ioerr(struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| |
| set_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags); |
| |
| /* |
| * A read may stumble upon this buffer later, make sure that it gets an |
| * error and knows there was an error. |
| */ |
| clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags); |
| |
| /* |
| * We need to set the mapping with the io error as well because a write |
| * error will flip the file system readonly, and then syncfs() will |
| * return a 0 because we are readonly if we don't modify the err seq for |
| * the superblock. |
| */ |
| mapping_set_error(eb->fs_info->btree_inode->i_mapping, -EIO); |
| |
| /* |
| * If writeback for a btree extent that doesn't belong to a log tree |
| * failed, increment the counter transaction->eb_write_errors. |
| * We do this because while the transaction is running and before it's |
| * committing (when we call filemap_fdata[write|wait]_range against |
| * the btree inode), we might have |
| * btree_inode->i_mapping->a_ops->writepages() called by the VM - if it |
| * returns an error or an error happens during writeback, when we're |
| * committing the transaction we wouldn't know about it, since the pages |
| * can be no longer dirty nor marked anymore for writeback (if a |
| * subsequent modification to the extent buffer didn't happen before the |
| * transaction commit), which makes filemap_fdata[write|wait]_range not |
| * able to find the pages tagged with SetPageError at transaction |
| * commit time. So if this happens we must abort the transaction, |
| * otherwise we commit a super block with btree roots that point to |
| * btree nodes/leafs whose content on disk is invalid - either garbage |
| * or the content of some node/leaf from a past generation that got |
| * cowed or deleted and is no longer valid. |
| * |
| * Note: setting AS_EIO/AS_ENOSPC in the btree inode's i_mapping would |
| * not be enough - we need to distinguish between log tree extents vs |
| * non-log tree extents, and the next filemap_fdatawait_range() call |
| * will catch and clear such errors in the mapping - and that call might |
| * be from a log sync and not from a transaction commit. Also, checking |
| * for the eb flag EXTENT_BUFFER_WRITE_ERR at transaction commit time is |
| * not done and would not be reliable - the eb might have been released |
| * from memory and reading it back again means that flag would not be |
| * set (since it's a runtime flag, not persisted on disk). |
| * |
| * Using the flags below in the btree inode also makes us achieve the |
| * goal of AS_EIO/AS_ENOSPC when writepages() returns success, started |
| * writeback for all dirty pages and before filemap_fdatawait_range() |
| * is called, the writeback for all dirty pages had already finished |
| * with errors - because we were not using AS_EIO/AS_ENOSPC, |
| * filemap_fdatawait_range() would return success, as it could not know |
| * that writeback errors happened (the pages were no longer tagged for |
| * writeback). |
| */ |
| switch (eb->log_index) { |
| case -1: |
| set_bit(BTRFS_FS_BTREE_ERR, &fs_info->flags); |
| break; |
| case 0: |
| set_bit(BTRFS_FS_LOG1_ERR, &fs_info->flags); |
| break; |
| case 1: |
| set_bit(BTRFS_FS_LOG2_ERR, &fs_info->flags); |
| break; |
| default: |
| BUG(); /* unexpected, logic error */ |
| } |
| } |
| |
| /* |
| * The endio specific version which won't touch any unsafe spinlock in endio |
| * context. |
| */ |
| static struct extent_buffer *find_extent_buffer_nolock( |
| struct btrfs_fs_info *fs_info, u64 start) |
| { |
| struct extent_buffer *eb; |
| |
| rcu_read_lock(); |
| eb = radix_tree_lookup(&fs_info->buffer_radix, |
| start >> fs_info->sectorsize_bits); |
| if (eb && atomic_inc_not_zero(&eb->refs)) { |
| rcu_read_unlock(); |
| return eb; |
| } |
| rcu_read_unlock(); |
| return NULL; |
| } |
| |
| static void end_bbio_meta_write(struct btrfs_bio *bbio) |
| { |
| struct extent_buffer *eb = bbio->private; |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| bool uptodate = !bbio->bio.bi_status; |
| struct folio_iter fi; |
| u32 bio_offset = 0; |
| |
| if (!uptodate) |
| set_btree_ioerr(eb); |
| |
| bio_for_each_folio_all(fi, &bbio->bio) { |
| u64 start = eb->start + bio_offset; |
| struct folio *folio = fi.folio; |
| u32 len = fi.length; |
| |
| btrfs_folio_clear_writeback(fs_info, folio, start, len); |
| bio_offset += len; |
| } |
| |
| clear_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags); |
| smp_mb__after_atomic(); |
| wake_up_bit(&eb->bflags, EXTENT_BUFFER_WRITEBACK); |
| |
| bio_put(&bbio->bio); |
| } |
| |
| static void prepare_eb_write(struct extent_buffer *eb) |
| { |
| u32 nritems; |
| unsigned long start; |
| unsigned long end; |
| |
| clear_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags); |
| |
| /* Set btree blocks beyond nritems with 0 to avoid stale content */ |
| nritems = btrfs_header_nritems(eb); |
| if (btrfs_header_level(eb) > 0) { |
| end = btrfs_node_key_ptr_offset(eb, nritems); |
| memzero_extent_buffer(eb, end, eb->len - end); |
| } else { |
| /* |
| * Leaf: |
| * header 0 1 2 .. N ... data_N .. data_2 data_1 data_0 |
| */ |
| start = btrfs_item_nr_offset(eb, nritems); |
| end = btrfs_item_nr_offset(eb, 0); |
| if (nritems == 0) |
| end += BTRFS_LEAF_DATA_SIZE(eb->fs_info); |
| else |
| end += btrfs_item_offset(eb, nritems - 1); |
| memzero_extent_buffer(eb, start, end - start); |
| } |
| } |
| |
| static noinline_for_stack void write_one_eb(struct extent_buffer *eb, |
| struct writeback_control *wbc) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| struct btrfs_bio *bbio; |
| |
| prepare_eb_write(eb); |
| |
| bbio = btrfs_bio_alloc(INLINE_EXTENT_BUFFER_PAGES, |
| REQ_OP_WRITE | REQ_META | wbc_to_write_flags(wbc), |
| eb->fs_info, end_bbio_meta_write, eb); |
| bbio->bio.bi_iter.bi_sector = eb->start >> SECTOR_SHIFT; |
| bio_set_dev(&bbio->bio, fs_info->fs_devices->latest_dev->bdev); |
| wbc_init_bio(wbc, &bbio->bio); |
| bbio->inode = BTRFS_I(eb->fs_info->btree_inode); |
| bbio->file_offset = eb->start; |
| if (fs_info->nodesize < PAGE_SIZE) { |
| struct folio *folio = eb->folios[0]; |
| bool ret; |
| |
| folio_lock(folio); |
| btrfs_subpage_set_writeback(fs_info, folio, eb->start, eb->len); |
| if (btrfs_subpage_clear_and_test_dirty(fs_info, folio, eb->start, |
| eb->len)) { |
| folio_clear_dirty_for_io(folio); |
| wbc->nr_to_write--; |
| } |
| ret = bio_add_folio(&bbio->bio, folio, eb->len, |
| eb->start - folio_pos(folio)); |
| ASSERT(ret); |
| wbc_account_cgroup_owner(wbc, folio_page(folio, 0), eb->len); |
| folio_unlock(folio); |
| } else { |
| int num_folios = num_extent_folios(eb); |
| |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = eb->folios[i]; |
| bool ret; |
| |
| folio_lock(folio); |
| folio_clear_dirty_for_io(folio); |
| folio_start_writeback(folio); |
| ret = bio_add_folio(&bbio->bio, folio, eb->folio_size, 0); |
| ASSERT(ret); |
| wbc_account_cgroup_owner(wbc, folio_page(folio, 0), |
| eb->folio_size); |
| wbc->nr_to_write -= folio_nr_pages(folio); |
| folio_unlock(folio); |
| } |
| } |
| btrfs_submit_bio(bbio, 0); |
| } |
| |
| /* |
| * Submit one subpage btree page. |
| * |
| * The main difference to submit_eb_page() is: |
| * - Page locking |
| * For subpage, we don't rely on page locking at all. |
| * |
| * - Flush write bio |
| * We only flush bio if we may be unable to fit current extent buffers into |
| * current bio. |
| * |
| * Return >=0 for the number of submitted extent buffers. |
| * Return <0 for fatal error. |
| */ |
| static int submit_eb_subpage(struct page *page, struct writeback_control *wbc) |
| { |
| struct btrfs_fs_info *fs_info = page_to_fs_info(page); |
| struct folio *folio = page_folio(page); |
| int submitted = 0; |
| u64 page_start = page_offset(page); |
| int bit_start = 0; |
| int sectors_per_node = fs_info->nodesize >> fs_info->sectorsize_bits; |
| |
| /* Lock and write each dirty extent buffers in the range */ |
| while (bit_start < fs_info->subpage_info->bitmap_nr_bits) { |
| struct btrfs_subpage *subpage = folio_get_private(folio); |
| struct extent_buffer *eb; |
| unsigned long flags; |
| u64 start; |
| |
| /* |
| * Take private lock to ensure the subpage won't be detached |
| * in the meantime. |
| */ |
| spin_lock(&page->mapping->i_private_lock); |
| if (!folio_test_private(folio)) { |
| spin_unlock(&page->mapping->i_private_lock); |
| break; |
| } |
| spin_lock_irqsave(&subpage->lock, flags); |
| if (!test_bit(bit_start + fs_info->subpage_info->dirty_offset, |
| subpage->bitmaps)) { |
| spin_unlock_irqrestore(&subpage->lock, flags); |
| spin_unlock(&page->mapping->i_private_lock); |
| bit_start++; |
| continue; |
| } |
| |
| start = page_start + bit_start * fs_info->sectorsize; |
| bit_start += sectors_per_node; |
| |
| /* |
| * Here we just want to grab the eb without touching extra |
| * spin locks, so call find_extent_buffer_nolock(). |
| */ |
| eb = find_extent_buffer_nolock(fs_info, start); |
| spin_unlock_irqrestore(&subpage->lock, flags); |
| spin_unlock(&page->mapping->i_private_lock); |
| |
| /* |
| * The eb has already reached 0 refs thus find_extent_buffer() |
| * doesn't return it. We don't need to write back such eb |
| * anyway. |
| */ |
| if (!eb) |
| continue; |
| |
| if (lock_extent_buffer_for_io(eb, wbc)) { |
| write_one_eb(eb, wbc); |
| submitted++; |
| } |
| free_extent_buffer(eb); |
| } |
| return submitted; |
| } |
| |
| /* |
| * Submit all page(s) of one extent buffer. |
| * |
| * @page: the page of one extent buffer |
| * @eb_context: to determine if we need to submit this page, if current page |
| * belongs to this eb, we don't need to submit |
| * |
| * The caller should pass each page in their bytenr order, and here we use |
| * @eb_context to determine if we have submitted pages of one extent buffer. |
| * |
| * If we have, we just skip until we hit a new page that doesn't belong to |
| * current @eb_context. |
| * |
| * If not, we submit all the page(s) of the extent buffer. |
| * |
| * Return >0 if we have submitted the extent buffer successfully. |
| * Return 0 if we don't need to submit the page, as it's already submitted by |
| * previous call. |
| * Return <0 for fatal error. |
| */ |
| static int submit_eb_page(struct page *page, struct btrfs_eb_write_context *ctx) |
| { |
| struct writeback_control *wbc = ctx->wbc; |
| struct address_space *mapping = page->mapping; |
| struct folio *folio = page_folio(page); |
| struct extent_buffer *eb; |
| int ret; |
| |
| if (!folio_test_private(folio)) |
| return 0; |
| |
| if (page_to_fs_info(page)->nodesize < PAGE_SIZE) |
| return submit_eb_subpage(page, wbc); |
| |
| spin_lock(&mapping->i_private_lock); |
| if (!folio_test_private(folio)) { |
| spin_unlock(&mapping->i_private_lock); |
| return 0; |
| } |
| |
| eb = folio_get_private(folio); |
| |
| /* |
| * Shouldn't happen and normally this would be a BUG_ON but no point |
| * crashing the machine for something we can survive anyway. |
| */ |
| if (WARN_ON(!eb)) { |
| spin_unlock(&mapping->i_private_lock); |
| return 0; |
| } |
| |
| if (eb == ctx->eb) { |
| spin_unlock(&mapping->i_private_lock); |
| return 0; |
| } |
| ret = atomic_inc_not_zero(&eb->refs); |
| spin_unlock(&mapping->i_private_lock); |
| if (!ret) |
| return 0; |
| |
| ctx->eb = eb; |
| |
| ret = btrfs_check_meta_write_pointer(eb->fs_info, ctx); |
| if (ret) { |
| if (ret == -EBUSY) |
| ret = 0; |
| free_extent_buffer(eb); |
| return ret; |
| } |
| |
| if (!lock_extent_buffer_for_io(eb, wbc)) { |
| free_extent_buffer(eb); |
| return 0; |
| } |
| /* Implies write in zoned mode. */ |
| if (ctx->zoned_bg) { |
| /* Mark the last eb in the block group. */ |
| btrfs_schedule_zone_finish_bg(ctx->zoned_bg, eb); |
| ctx->zoned_bg->meta_write_pointer += eb->len; |
| } |
| write_one_eb(eb, wbc); |
| free_extent_buffer(eb); |
| return 1; |
| } |
| |
| int btree_write_cache_pages(struct address_space *mapping, |
| struct writeback_control *wbc) |
| { |
| struct btrfs_eb_write_context ctx = { .wbc = wbc }; |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(mapping->host); |
| int ret = 0; |
| int done = 0; |
| int nr_to_write_done = 0; |
| struct folio_batch fbatch; |
| unsigned int nr_folios; |
| pgoff_t index; |
| pgoff_t end; /* Inclusive */ |
| int scanned = 0; |
| xa_mark_t tag; |
| |
| folio_batch_init(&fbatch); |
| if (wbc->range_cyclic) { |
| index = mapping->writeback_index; /* Start from prev offset */ |
| end = -1; |
| /* |
| * Start from the beginning does not need to cycle over the |
| * range, mark it as scanned. |
| */ |
| scanned = (index == 0); |
| } else { |
| index = wbc->range_start >> PAGE_SHIFT; |
| end = wbc->range_end >> PAGE_SHIFT; |
| scanned = 1; |
| } |
| if (wbc->sync_mode == WB_SYNC_ALL) |
| tag = PAGECACHE_TAG_TOWRITE; |
| else |
| tag = PAGECACHE_TAG_DIRTY; |
| btrfs_zoned_meta_io_lock(fs_info); |
| retry: |
| if (wbc->sync_mode == WB_SYNC_ALL) |
| tag_pages_for_writeback(mapping, index, end); |
| while (!done && !nr_to_write_done && (index <= end) && |
| (nr_folios = filemap_get_folios_tag(mapping, &index, end, |
| tag, &fbatch))) { |
| unsigned i; |
| |
| for (i = 0; i < nr_folios; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| ret = submit_eb_page(&folio->page, &ctx); |
| if (ret == 0) |
| continue; |
| if (ret < 0) { |
| done = 1; |
| break; |
| } |
| |
| /* |
| * the filesystem may choose to bump up nr_to_write. |
| * We have to make sure to honor the new nr_to_write |
| * at any time |
| */ |
| nr_to_write_done = wbc->nr_to_write <= 0; |
| } |
| folio_batch_release(&fbatch); |
| cond_resched(); |
| } |
| if (!scanned && !done) { |
| /* |
| * We hit the last page and there is more work to be done: wrap |
| * back to the start of the file |
| */ |
| scanned = 1; |
| index = 0; |
| goto retry; |
| } |
| /* |
| * If something went wrong, don't allow any metadata write bio to be |
| * submitted. |
| * |
| * This would prevent use-after-free if we had dirty pages not |
| * cleaned up, which can still happen by fuzzed images. |
| * |
| * - Bad extent tree |
| * Allowing existing tree block to be allocated for other trees. |
| * |
| * - Log tree operations |
| * Exiting tree blocks get allocated to log tree, bumps its |
| * generation, then get cleaned in tree re-balance. |
| * Such tree block will not be written back, since it's clean, |
| * thus no WRITTEN flag set. |
| * And after log writes back, this tree block is not traced by |
| * any dirty extent_io_tree. |
| * |
| * - Offending tree block gets re-dirtied from its original owner |
| * Since it has bumped generation, no WRITTEN flag, it can be |
| * reused without COWing. This tree block will not be traced |
| * by btrfs_transaction::dirty_pages. |
| * |
| * Now such dirty tree block will not be cleaned by any dirty |
| * extent io tree. Thus we don't want to submit such wild eb |
| * if the fs already has error. |
| * |
| * We can get ret > 0 from submit_extent_page() indicating how many ebs |
| * were submitted. Reset it to 0 to avoid false alerts for the caller. |
| */ |
| if (ret > 0) |
| ret = 0; |
| if (!ret && BTRFS_FS_ERROR(fs_info)) |
| ret = -EROFS; |
| |
| if (ctx.zoned_bg) |
| btrfs_put_block_group(ctx.zoned_bg); |
| btrfs_zoned_meta_io_unlock(fs_info); |
| return ret; |
| } |
| |
| /* |
| * Walk the list of dirty pages of the given address space and write all of them. |
| * |
| * @mapping: address space structure to write |
| * @wbc: subtract the number of written pages from *@wbc->nr_to_write |
| * @bio_ctrl: holds context for the write, namely the bio |
| * |
| * If a page is already under I/O, write_cache_pages() skips it, even |
| * if it's dirty. This is desirable behaviour for memory-cleaning writeback, |
| * but it is INCORRECT for data-integrity system calls such as fsync(). fsync() |
| * and msync() need to guarantee that all the data which was dirty at the time |
| * the call was made get new I/O started against them. If wbc->sync_mode is |
| * WB_SYNC_ALL then we were called for data integrity and we must wait for |
| * existing IO to complete. |
| */ |
| static int extent_write_cache_pages(struct address_space *mapping, |
| struct btrfs_bio_ctrl *bio_ctrl) |
| { |
| struct writeback_control *wbc = bio_ctrl->wbc; |
| struct inode *inode = mapping->host; |
| int ret = 0; |
| int done = 0; |
| int nr_to_write_done = 0; |
| struct folio_batch fbatch; |
| unsigned int nr_folios; |
| pgoff_t index; |
| pgoff_t end; /* Inclusive */ |
| pgoff_t done_index; |
| int range_whole = 0; |
| int scanned = 0; |
| xa_mark_t tag; |
| |
| /* |
| * We have to hold onto the inode so that ordered extents can do their |
| * work when the IO finishes. The alternative to this is failing to add |
| * an ordered extent if the igrab() fails there and that is a huge pain |
| * to deal with, so instead just hold onto the inode throughout the |
| * writepages operation. If it fails here we are freeing up the inode |
| * anyway and we'd rather not waste our time writing out stuff that is |
| * going to be truncated anyway. |
| */ |
| if (!igrab(inode)) |
| return 0; |
| |
| folio_batch_init(&fbatch); |
| if (wbc->range_cyclic) { |
| index = mapping->writeback_index; /* Start from prev offset */ |
| end = -1; |
| /* |
| * Start from the beginning does not need to cycle over the |
| * range, mark it as scanned. |
| */ |
| scanned = (index == 0); |
| } else { |
| index = wbc->range_start >> PAGE_SHIFT; |
| end = wbc->range_end >> PAGE_SHIFT; |
| if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) |
| range_whole = 1; |
| scanned = 1; |
| } |
| |
| /* |
| * We do the tagged writepage as long as the snapshot flush bit is set |
| * and we are the first one who do the filemap_flush() on this inode. |
| * |
| * The nr_to_write == LONG_MAX is needed to make sure other flushers do |
| * not race in and drop the bit. |
| */ |
| if (range_whole && wbc->nr_to_write == LONG_MAX && |
| test_and_clear_bit(BTRFS_INODE_SNAPSHOT_FLUSH, |
| &BTRFS_I(inode)->runtime_flags)) |
| wbc->tagged_writepages = 1; |
| |
| if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages) |
| tag = PAGECACHE_TAG_TOWRITE; |
| else |
| tag = PAGECACHE_TAG_DIRTY; |
| retry: |
| if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages) |
| tag_pages_for_writeback(mapping, index, end); |
| done_index = index; |
| while (!done && !nr_to_write_done && (index <= end) && |
| (nr_folios = filemap_get_folios_tag(mapping, &index, |
| end, tag, &fbatch))) { |
| unsigned i; |
| |
| for (i = 0; i < nr_folios; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| done_index = folio_next_index(folio); |
| /* |
| * At this point we hold neither the i_pages lock nor |
| * the page lock: the page may be truncated or |
| * invalidated (changing page->mapping to NULL), |
| * or even swizzled back from swapper_space to |
| * tmpfs file mapping |
| */ |
| if (!folio_trylock(folio)) { |
| submit_write_bio(bio_ctrl, 0); |
| folio_lock(folio); |
| } |
| |
| if (unlikely(folio->mapping != mapping)) { |
| folio_unlock(folio); |
| continue; |
| } |
| |
| if (!folio_test_dirty(folio)) { |
| /* Someone wrote it for us. */ |
| folio_unlock(folio); |
| continue; |
| } |
| |
| if (wbc->sync_mode != WB_SYNC_NONE) { |
| if (folio_test_writeback(folio)) |
| submit_write_bio(bio_ctrl, 0); |
| folio_wait_writeback(folio); |
| } |
| |
| if (folio_test_writeback(folio) || |
| !folio_clear_dirty_for_io(folio)) { |
| folio_unlock(folio); |
| continue; |
| } |
| |
| ret = __extent_writepage(&folio->page, bio_ctrl); |
| if (ret < 0) { |
| done = 1; |
| break; |
| } |
| |
| /* |
| * The filesystem may choose to bump up nr_to_write. |
| * We have to make sure to honor the new nr_to_write |
| * at any time. |
| */ |
| nr_to_write_done = (wbc->sync_mode == WB_SYNC_NONE && |
| wbc->nr_to_write <= 0); |
| } |
| folio_batch_release(&fbatch); |
| cond_resched(); |
| } |
| if (!scanned && !done) { |
| /* |
| * We hit the last page and there is more work to be done: wrap |
| * back to the start of the file |
| */ |
| scanned = 1; |
| index = 0; |
| |
| /* |
| * If we're looping we could run into a page that is locked by a |
| * writer and that writer could be waiting on writeback for a |
| * page in our current bio, and thus deadlock, so flush the |
| * write bio here. |
| */ |
| submit_write_bio(bio_ctrl, 0); |
| goto retry; |
| } |
| |
| if (wbc->range_cyclic || (wbc->nr_to_write > 0 && range_whole)) |
| mapping->writeback_index = done_index; |
| |
| btrfs_add_delayed_iput(BTRFS_I(inode)); |
| return ret; |
| } |
| |
| /* |
| * Submit the pages in the range to bio for call sites which delalloc range has |
| * already been ran (aka, ordered extent inserted) and all pages are still |
| * locked. |
| */ |
| void extent_write_locked_range(struct inode *inode, struct page *locked_page, |
| u64 start, u64 end, struct writeback_control *wbc, |
| bool pages_dirty) |
| { |
| bool found_error = false; |
| int ret = 0; |
| struct address_space *mapping = inode->i_mapping; |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); |
| const u32 sectorsize = fs_info->sectorsize; |
| loff_t i_size = i_size_read(inode); |
| u64 cur = start; |
| struct btrfs_bio_ctrl bio_ctrl = { |
| .wbc = wbc, |
| .opf = REQ_OP_WRITE | wbc_to_write_flags(wbc), |
| }; |
| |
| if (wbc->no_cgroup_owner) |
| bio_ctrl.opf |= REQ_BTRFS_CGROUP_PUNT; |
| |
| ASSERT(IS_ALIGNED(start, sectorsize) && IS_ALIGNED(end + 1, sectorsize)); |
| |
| while (cur <= end) { |
| u64 cur_end = min(round_down(cur, PAGE_SIZE) + PAGE_SIZE - 1, end); |
| u32 cur_len = cur_end + 1 - cur; |
| struct page *page; |
| int nr = 0; |
| |
| page = find_get_page(mapping, cur >> PAGE_SHIFT); |
| ASSERT(PageLocked(page)); |
| if (pages_dirty && page != locked_page) { |
| ASSERT(PageDirty(page)); |
| clear_page_dirty_for_io(page); |
| } |
| |
| ret = __extent_writepage_io(BTRFS_I(inode), page, &bio_ctrl, |
| i_size, &nr); |
| if (ret == 1) |
| goto next_page; |
| |
| /* Make sure the mapping tag for page dirty gets cleared. */ |
| if (nr == 0) { |
| set_page_writeback(page); |
| end_page_writeback(page); |
| } |
| if (ret) { |
| btrfs_mark_ordered_io_finished(BTRFS_I(inode), page, |
| cur, cur_len, !ret); |
| mapping_set_error(page->mapping, ret); |
| } |
| btrfs_folio_unlock_writer(fs_info, page_folio(page), cur, cur_len); |
| if (ret < 0) |
| found_error = true; |
| next_page: |
| put_page(page); |
| cur = cur_end + 1; |
| } |
| |
| submit_write_bio(&bio_ctrl, found_error ? ret : 0); |
| } |
| |
| int extent_writepages(struct address_space *mapping, |
| struct writeback_control *wbc) |
| { |
| struct inode *inode = mapping->host; |
| int ret = 0; |
| struct btrfs_bio_ctrl bio_ctrl = { |
| .wbc = wbc, |
| .opf = REQ_OP_WRITE | wbc_to_write_flags(wbc), |
| }; |
| |
| /* |
| * Allow only a single thread to do the reloc work in zoned mode to |
| * protect the write pointer updates. |
| */ |
| btrfs_zoned_data_reloc_lock(BTRFS_I(inode)); |
| ret = extent_write_cache_pages(mapping, &bio_ctrl); |
| submit_write_bio(&bio_ctrl, ret); |
| btrfs_zoned_data_reloc_unlock(BTRFS_I(inode)); |
| return ret; |
| } |
| |
| void extent_readahead(struct readahead_control *rac) |
| { |
| struct btrfs_bio_ctrl bio_ctrl = { .opf = REQ_OP_READ | REQ_RAHEAD }; |
| struct page *pagepool[16]; |
| struct extent_map *em_cached = NULL; |
| u64 prev_em_start = (u64)-1; |
| int nr; |
| |
| while ((nr = readahead_page_batch(rac, pagepool))) { |
| u64 contig_start = readahead_pos(rac); |
| u64 contig_end = contig_start + readahead_batch_length(rac) - 1; |
| |
| contiguous_readpages(pagepool, nr, contig_start, contig_end, |
| &em_cached, &bio_ctrl, &prev_em_start); |
| } |
| |
| if (em_cached) |
| free_extent_map(em_cached); |
| submit_one_bio(&bio_ctrl); |
| } |
| |
| /* |
| * basic invalidate_folio code, this waits on any locked or writeback |
| * ranges corresponding to the folio, and then deletes any extent state |
| * records from the tree |
| */ |
| int extent_invalidate_folio(struct extent_io_tree *tree, |
| struct folio *folio, size_t offset) |
| { |
| struct extent_state *cached_state = NULL; |
| u64 start = folio_pos(folio); |
| u64 end = start + folio_size(folio) - 1; |
| size_t blocksize = folio_to_fs_info(folio)->sectorsize; |
| |
| /* This function is only called for the btree inode */ |
| ASSERT(tree->owner == IO_TREE_BTREE_INODE_IO); |
| |
| start += ALIGN(offset, blocksize); |
| if (start > end) |
| return 0; |
| |
| lock_extent(tree, start, end, &cached_state); |
| folio_wait_writeback(folio); |
| |
| /* |
| * Currently for btree io tree, only EXTENT_LOCKED is utilized, |
| * so here we only need to unlock the extent range to free any |
| * existing extent state. |
| */ |
| unlock_extent(tree, start, end, &cached_state); |
| return 0; |
| } |
| |
| /* |
| * a helper for release_folio, this tests for areas of the page that |
| * are locked or under IO and drops the related state bits if it is safe |
| * to drop the page. |
| */ |
| static int try_release_extent_state(struct extent_io_tree *tree, |
| struct page *page, gfp_t mask) |
| { |
| u64 start = page_offset(page); |
| u64 end = start + PAGE_SIZE - 1; |
| int ret = 1; |
| |
| if (test_range_bit_exists(tree, start, end, EXTENT_LOCKED)) { |
| ret = 0; |
| } else { |
| u32 clear_bits = ~(EXTENT_LOCKED | EXTENT_NODATASUM | |
| EXTENT_DELALLOC_NEW | EXTENT_CTLBITS | |
| EXTENT_QGROUP_RESERVED); |
| |
| /* |
| * At this point we can safely clear everything except the |
| * locked bit, the nodatasum bit and the delalloc new bit. |
| * The delalloc new bit will be cleared by ordered extent |
| * completion. |
| */ |
| ret = __clear_extent_bit(tree, start, end, clear_bits, NULL, NULL); |
| |
| /* if clear_extent_bit failed for enomem reasons, |
| * we can't allow the release to continue. |
| */ |
| if (ret < 0) |
| ret = 0; |
| else |
| ret = 1; |
| } |
| return ret; |
| } |
| |
| /* |
| * a helper for release_folio. As long as there are no locked extents |
| * in the range corresponding to the page, both state records and extent |
| * map records are removed |
| */ |
| int try_release_extent_mapping(struct page *page, gfp_t mask) |
| { |
| struct extent_map *em; |
| u64 start = page_offset(page); |
| u64 end = start + PAGE_SIZE - 1; |
| struct btrfs_inode *btrfs_inode = page_to_inode(page); |
| struct extent_io_tree *tree = &btrfs_inode->io_tree; |
| struct extent_map_tree *map = &btrfs_inode->extent_tree; |
| |
| if (gfpflags_allow_blocking(mask) && |
| page->mapping->host->i_size > SZ_16M) { |
| u64 len; |
| while (start <= end) { |
| struct btrfs_fs_info *fs_info; |
| u64 cur_gen; |
| |
| len = end - start + 1; |
| write_lock(&map->lock); |
| em = lookup_extent_mapping(map, start, len); |
| if (!em) { |
| write_unlock(&map->lock); |
| break; |
| } |
| if ((em->flags & EXTENT_FLAG_PINNED) || |
| em->start != start) { |
| write_unlock(&map->lock); |
| free_extent_map(em); |
| break; |
| } |
| if (test_range_bit_exists(tree, em->start, |
| extent_map_end(em) - 1, |
| EXTENT_LOCKED)) |
| goto next; |
| /* |
| * If it's not in the list of modified extents, used |
| * by a fast fsync, we can remove it. If it's being |
| * logged we can safely remove it since fsync took an |
| * extra reference on the em. |
| */ |
| if (list_empty(&em->list) || |
| (em->flags & EXTENT_FLAG_LOGGING)) |
| goto remove_em; |
| /* |
| * If it's in the list of modified extents, remove it |
| * only if its generation is older then the current one, |
| * in which case we don't need it for a fast fsync. |
| * Otherwise don't remove it, we could be racing with an |
| * ongoing fast fsync that could miss the new extent. |
| */ |
| fs_info = btrfs_inode->root->fs_info; |
| spin_lock(&fs_info->trans_lock); |
| cur_gen = fs_info->generation; |
| spin_unlock(&fs_info->trans_lock); |
| if (em->generation >= cur_gen) |
| goto next; |
| remove_em: |
| /* |
| * We only remove extent maps that are not in the list of |
| * modified extents or that are in the list but with a |
| * generation lower then the current generation, so there |
| * is no need to set the full fsync flag on the inode (it |
| * hurts the fsync performance for workloads with a data |
| * size that exceeds or is close to the system's memory). |
| */ |
| remove_extent_mapping(map, em); |
| /* once for the rb tree */ |
| free_extent_map(em); |
| next: |
| start = extent_map_end(em); |
| write_unlock(&map->lock); |
| |
| /* once for us */ |
| free_extent_map(em); |
| |
| cond_resched(); /* Allow large-extent preemption. */ |
| } |
| } |
| return try_release_extent_state(tree, page, mask); |
| } |
| |
| struct btrfs_fiemap_entry { |
| u64 offset; |
| u64 phys; |
| u64 len; |
| u32 flags; |
| }; |
| |
| /* |
| * Indicate the caller of emit_fiemap_extent() that it needs to unlock the file |
| * range from the inode's io tree, unlock the subvolume tree search path, flush |
| * the fiemap cache and relock the file range and research the subvolume tree. |
| * The value here is something negative that can't be confused with a valid |
| * errno value and different from 1 because that's also a return value from |
| * fiemap_fill_next_extent() and also it's often used to mean some btree search |
| * did not find a key, so make it some distinct negative value. |
| */ |
| #define BTRFS_FIEMAP_FLUSH_CACHE (-(MAX_ERRNO + 1)) |
| |
| /* |
| * Used to: |
| * |
| * - Cache the next entry to be emitted to the fiemap buffer, so that we can |
| * merge extents that are contiguous and can be grouped as a single one; |
| * |
| * - Store extents ready to be written to the fiemap buffer in an intermediary |
| * buffer. This intermediary buffer is to ensure that in case the fiemap |
| * buffer is memory mapped to the fiemap target file, we don't deadlock |
| * during btrfs_page_mkwrite(). This is because during fiemap we are locking |
| * an extent range in order to prevent races with delalloc flushing and |
| * ordered extent completion, which is needed in order to reliably detect |
| * delalloc in holes and prealloc extents. And this can lead to a deadlock |
| * if the fiemap buffer is memory mapped to the file we are running fiemap |
| * against (a silly, useless in practice scenario, but possible) because |
| * btrfs_page_mkwrite() will try to lock the same extent range. |
| */ |
| struct fiemap_cache { |
| /* An array of ready fiemap entries. */ |
| struct btrfs_fiemap_entry *entries; |
| /* Number of entries in the entries array. */ |
| int entries_size; |
| /* Index of the next entry in the entries array to write to. */ |
| int entries_pos; |
| /* |
| * Once the entries array is full, this indicates what's the offset for |
| * the next file extent item we must search for in the inode's subvolume |
| * tree after unlocking the extent range in the inode's io tree and |
| * releasing the search path. |
| */ |
| u64 next_search_offset; |
| /* |
| * This matches struct fiemap_extent_info::fi_mapped_extents, we use it |
| * to count ourselves emitted extents and stop instead of relying on |
| * fiemap_fill_next_extent() because we buffer ready fiemap entries at |
| * the @entries array, and we want to stop as soon as we hit the max |
| * amount of extents to map, not just to save time but also to make the |
| * logic at extent_fiemap() simpler. |
| */ |
| unsigned int extents_mapped; |
| /* Fields for the cached extent (unsubmitted, not ready, extent). */ |
| u64 offset; |
| u64 phys; |
| u64 len; |
| u32 flags; |
| bool cached; |
| }; |
| |
| static int flush_fiemap_cache(struct fiemap_extent_info *fieinfo, |
| struct fiemap_cache *cache) |
| { |
| for (int i = 0; i < cache->entries_pos; i++) { |
| struct btrfs_fiemap_entry *entry = &cache->entries[i]; |
| int ret; |
| |
| ret = fiemap_fill_next_extent(fieinfo, entry->offset, |
| entry->phys, entry->len, |
| entry->flags); |
| /* |
| * Ignore 1 (reached max entries) because we keep track of that |
| * ourselves in emit_fiemap_extent(). |
| */ |
| if (ret < 0) |
| return ret; |
| } |
| cache->entries_pos = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * Helper to submit fiemap extent. |
| * |
| * Will try to merge current fiemap extent specified by @offset, @phys, |
| * @len and @flags with cached one. |
| * And only when we fails to merge, cached one will be submitted as |
| * fiemap extent. |
| * |
| * Return value is the same as fiemap_fill_next_extent(). |
| */ |
| static int emit_fiemap_extent(struct fiemap_extent_info *fieinfo, |
| struct fiemap_cache *cache, |
| u64 offset, u64 phys, u64 len, u32 flags) |
| { |
| struct btrfs_fiemap_entry *entry; |
| u64 cache_end; |
| |
| /* Set at the end of extent_fiemap(). */ |
| ASSERT((flags & FIEMAP_EXTENT_LAST) == 0); |
| |
| if (!cache->cached) |
| goto assign; |
| |
| /* |
| * When iterating the extents of the inode, at extent_fiemap(), we may |
| * find an extent that starts at an offset behind the end offset of the |
| * previous extent we processed. This happens if fiemap is called |
| * without FIEMAP_FLAG_SYNC and there are ordered extents completing |
| * after we had to unlock the file range, release the search path, emit |
| * the fiemap extents stored in the buffer (cache->entries array) and |
| * the lock the remainder of the range and re-search the btree. |
| * |
| * For example we are in leaf X processing its last item, which is the |
| * file extent item for file range [512K, 1M[, and after |
| * btrfs_next_leaf() releases the path, there's an ordered extent that |
| * completes for the file range [768K, 2M[, and that results in trimming |
| * the file extent item so that it now corresponds to the file range |
| * [512K, 768K[ and a new file extent item is inserted for the file |
| * range [768K, 2M[, which may end up as the last item of leaf X or as |
| * the first item of the next leaf - in either case btrfs_next_leaf() |
| * will leave us with a path pointing to the new extent item, for the |
| * file range [768K, 2M[, since that's the first key that follows the |
| * last one we processed. So in order not to report overlapping extents |
| * to user space, we trim the length of the previously cached extent and |
| * emit it. |
| * |
| * Upon calling btrfs_next_leaf() we may also find an extent with an |
| * offset smaller than or equals to cache->offset, and this happens |
| * when we had a hole or prealloc extent with several delalloc ranges in |
| * it, but after btrfs_next_leaf() released the path, delalloc was |
| * flushed and the resulting ordered extents were completed, so we can |
| * now have found a file extent item for an offset that is smaller than |
| * or equals to what we have in cache->offset. We deal with this as |
| * described below. |
| */ |
| cache_end = cache->offset + cache->len; |
| if (cache_end > offset) { |
| if (offset == cache->offset) { |
| /* |
| * We cached a dealloc range (found in the io tree) for |
| * a hole or prealloc extent and we have now found a |
| * file extent item for the same offset. What we have |
| * now is more recent and up to date, so discard what |
| * we had in the cache and use what we have just found. |
| */ |
| goto assign; |
| } else if (offset > cache->offset) { |
| /* |
| * The extent range we previously found ends after the |
| * offset of the file extent item we found and that |
| * offset falls somewhere in the middle of that previous |
| * extent range. So adjust the range we previously found |
| * to end at the offset of the file extent item we have |
| * just found, since this extent is more up to date. |
| * Emit that adjusted range and cache the file extent |
| * item we have just found. This corresponds to the case |
| * where a previously found file extent item was split |
| * due to an ordered extent completing. |
| */ |
| cache->len = offset - cache->offset; |
| goto emit; |
| } else { |
| const u64 range_end = offset + len; |
| |
| /* |
| * The offset of the file extent item we have just found |
| * is behind the cached offset. This means we were |
| * processing a hole or prealloc extent for which we |
| * have found delalloc ranges (in the io tree), so what |
| * we have in the cache is the last delalloc range we |
| * found while the file extent item we found can be |
| * either for a whole delalloc range we previously |
| * emmitted or only a part of that range. |
| * |
| * We have two cases here: |
| * |
| * 1) The file extent item's range ends at or behind the |
| * cached extent's end. In this case just ignore the |
| * current file extent item because we don't want to |
| * overlap with previous ranges that may have been |
| * emmitted already; |
| * |
| * 2) The file extent item starts behind the currently |
| * cached extent but its end offset goes beyond the |
| * end offset of the cached extent. We don't want to |
| * overlap with a previous range that may have been |
| * emmitted already, so we emit the currently cached |
| * extent and then partially store the current file |
| * extent item's range in the cache, for the subrange |
| * going the cached extent's end to the end of the |
| * file extent item. |
| */ |
| if (range_end <= cache_end) |
| return 0; |
| |
| if (!(flags & (FIEMAP_EXTENT_ENCODED | FIEMAP_EXTENT_DELALLOC))) |
| phys += cache_end - offset; |
| |
| offset = cache_end; |
| len = range_end - cache_end; |
| goto emit; |
| } |
| } |
| |
| /* |
| * Only merges fiemap extents if |
| * 1) Their logical addresses are continuous |
| * |
| * 2) Their physical addresses are continuous |
| * So truly compressed (physical size smaller than logical size) |
| * extents won't get merged with each other |
| * |
| * 3) Share same flags |
| */ |
| if (cache->offset + cache->len == offset && |
| cache->phys + cache->len == phys && |
| cache->flags == flags) { |
| cache->len += len; |
| return 0; |
| } |
| |
| emit: |
| /* Not mergeable, need to submit cached one */ |
| |
| if (cache->entries_pos == cache->entries_size) { |
| /* |
| * We will need to research for the end offset of the last |
| * stored extent and not from the current offset, because after |
| * unlocking the range and releasing the path, if there's a hole |
| * between that end offset and this current offset, a new extent |
| * may have been inserted due to a new write, so we don't want |
| * to miss it. |
| */ |
| entry = &cache->entries[cache->entries_size - 1]; |
| cache->next_search_offset = entry->offset + entry->len; |
| cache->cached = false; |
| |
| return BTRFS_FIEMAP_FLUSH_CACHE; |
| } |
| |
| entry = &cache->entries[cache->entries_pos]; |
| entry->offset = cache->offset; |
| entry->phys = cache->phys; |
| entry->len = cache->len; |
| entry->flags = cache->flags; |
| cache->entries_pos++; |
| cache->extents_mapped++; |
| |
| if (cache->extents_mapped == fieinfo->fi_extents_max) { |
| cache->cached = false; |
| return 1; |
| } |
| assign: |
| cache->cached = true; |
| cache->offset = offset; |
| cache->phys = phys; |
| cache->len = len; |
| cache->flags = flags; |
| |
| return 0; |
| } |
| |
| /* |
| * Emit last fiemap cache |
| * |
| * The last fiemap cache may still be cached in the following case: |
| * 0 4k 8k |
| * |<- Fiemap range ->| |
| * |<------------ First extent ----------->| |
| * |
| * In this case, the first extent range will be cached but not emitted. |
| * So we must emit it before ending extent_fiemap(). |
| */ |
| static int emit_last_fiemap_cache(struct fiemap_extent_info *fieinfo, |
| struct fiemap_cache *cache) |
| { |
| int ret; |
| |
| if (!cache->cached) |
| return 0; |
| |
| ret = fiemap_fill_next_extent(fieinfo, cache->offset, cache->phys, |
| cache->len, cache->flags); |
| cache->cached = false; |
| if (ret > 0) |
| ret = 0; |
| return ret; |
| } |
| |
| static int fiemap_next_leaf_item(struct btrfs_inode *inode, struct btrfs_path *path) |
| { |
| struct extent_buffer *clone = path->nodes[0]; |
| struct btrfs_key key; |
| int slot; |
| int ret; |
| |
| path->slots[0]++; |
| if (path->slots[0] < btrfs_header_nritems(path->nodes[0])) |
| return 0; |
| |
| /* |
| * Add a temporary extra ref to an already cloned extent buffer to |
| * prevent btrfs_next_leaf() freeing it, we want to reuse it to avoid |
| * the cost of allocating a new one. |
| */ |
| ASSERT(test_bit(EXTENT_BUFFER_UNMAPPED, &clone->bflags)); |
| atomic_inc(&clone->refs); |
| |
| ret = btrfs_next_leaf(inode->root, path); |
| if (ret != 0) |
| goto out; |
| |
| /* |
| * Don't bother with cloning if there are no more file extent items for |
| * our inode. |
| */ |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); |
| if (key.objectid != btrfs_ino(inode) || key.type != BTRFS_EXTENT_DATA_KEY) { |
| ret = 1; |
| goto out; |
| } |
| |
| /* See the comment at fiemap_search_slot() about why we clone. */ |
| copy_extent_buffer_full(clone, path->nodes[0]); |
| /* |
| * Important to preserve the start field, for the optimizations when |
| * checking if extents are shared (see extent_fiemap()). |
| */ |
| clone->start = path->nodes[0]->start; |
| |
| slot = path->slots[0]; |
| btrfs_release_path(path); |
| path->nodes[0] = clone; |
| path->slots[0] = slot; |
| out: |
| if (ret) |
| free_extent_buffer(clone); |
| |
| return ret; |
| } |
| |
| /* |
| * Search for the first file extent item that starts at a given file offset or |
| * the one that starts immediately before that offset. |
| * Returns: 0 on success, < 0 on error, 1 if not found. |
| */ |
| static int fiemap_search_slot(struct btrfs_inode *inode, struct btrfs_path *path, |
| u64 file_offset) |
| { |
| const u64 ino = btrfs_ino(inode); |
| struct btrfs_root *root = inode->root; |
| struct extent_buffer *clone; |
| struct btrfs_key key; |
| int slot; |
| int ret; |
| |
| key.objectid = ino; |
| key.type = BTRFS_EXTENT_DATA_KEY; |
| key.offset = file_offset; |
| |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); |
| if (ret < 0) |
| return ret; |
| |
| if (ret > 0 && path->slots[0] > 0) { |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0] - 1); |
| if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY) |
| path->slots[0]--; |
| } |
| |
| if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { |
| ret = btrfs_next_leaf(root, path); |
| if (ret != 0) |
| return ret; |
| |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); |
| if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY) |
| return 1; |
| } |
| |
| /* |
| * We clone the leaf and use it during fiemap. This is because while |
| * using the leaf we do expensive things like checking if an extent is |
| * shared, which can take a long time. In order to prevent blocking |
| * other tasks for too long, we use a clone of the leaf. We have locked |
| * the file range in the inode's io tree, so we know none of our file |
| * extent items can change. This way we avoid blocking other tasks that |
| * want to insert items for other inodes in the same leaf or b+tree |
| * rebalance operations (triggered for example when someone is trying |
| * to push items into this leaf when trying to insert an item in a |
| * neighbour leaf). |
| * We also need the private clone because holding a read lock on an |
| * extent buffer of the subvolume's b+tree will make lockdep unhappy |
| * when we check if extents are shared, as backref walking may need to |
| * lock the same leaf we are processing. |
| */ |
| clone = btrfs_clone_extent_buffer(path->nodes[0]); |
| if (!clone) |
| return -ENOMEM; |
| |
| slot = path->slots[0]; |
| btrfs_release_path(path); |
| path->nodes[0] = clone; |
| path->slots[0] = slot; |
| |
| return 0; |
| } |
| |
| /* |
| * Process a range which is a hole or a prealloc extent in the inode's subvolume |
| * btree. If @disk_bytenr is 0, we are dealing with a hole, otherwise a prealloc |
| * extent. The end offset (@end) is inclusive. |
| */ |
| static int fiemap_process_hole(struct btrfs_inode *inode, |
| struct fiemap_extent_info *fieinfo, |
| struct fiemap_cache *cache, |
| struct extent_state **delalloc_cached_state, |
| struct btrfs_backref_share_check_ctx *backref_ctx, |
| u64 disk_bytenr, u64 extent_offset, |
| u64 extent_gen, |
| u64 start, u64 end) |
| { |
| const u64 i_size = i_size_read(&inode->vfs_inode); |
| u64 cur_offset = start; |
| u64 last_delalloc_end = 0; |
| u32 prealloc_flags = FIEMAP_EXTENT_UNWRITTEN; |
| bool checked_extent_shared = false; |
| int ret; |
| |
| /* |
| * There can be no delalloc past i_size, so don't waste time looking for |
| * it beyond i_size. |
| */ |
| while (cur_offset < end && cur_offset < i_size) { |
| u64 delalloc_start; |
| u64 delalloc_end; |
| u64 prealloc_start; |
| u64 prealloc_len = 0; |
| bool delalloc; |
| |
| delalloc = btrfs_find_delalloc_in_range(inode, cur_offset, end, |
| delalloc_cached_state, |
| &delalloc_start, |
| &delalloc_end); |
| if (!delalloc) |
| break; |
| |
| /* |
| * If this is a prealloc extent we have to report every section |
| * of it that has no delalloc. |
| */ |
| if (disk_bytenr != 0) { |
| if (last_delalloc_end == 0) { |
| prealloc_start = start; |
| prealloc_len = delalloc_start - start; |
| } else { |
| prealloc_start = last_delalloc_end + 1; |
| prealloc_len = delalloc_start - prealloc_start; |
| } |
| } |
| |
| if (prealloc_len > 0) { |
| if (!checked_extent_shared && fieinfo->fi_extents_max) { |
| ret = btrfs_is_data_extent_shared(inode, |
| disk_bytenr, |
| extent_gen, |
| backref_ctx); |
| if (ret < 0) |
| return ret; |
| else if (ret > 0) |
| prealloc_flags |= FIEMAP_EXTENT_SHARED; |
| |
| checked_extent_shared = true; |
| } |
| ret = emit_fiemap_extent(fieinfo, cache, prealloc_start, |
| disk_bytenr + extent_offset, |
| prealloc_len, prealloc_flags); |
| if (ret) |
| return ret; |
| extent_offset += prealloc_len; |
| } |
| |
| ret = emit_fiemap_extent(fieinfo, cache, delalloc_start, 0, |
| delalloc_end + 1 - delalloc_start, |
| FIEMAP_EXTENT_DELALLOC | |
| FIEMAP_EXTENT_UNKNOWN); |
| if (ret) |
| return ret; |
| |
| last_delalloc_end = delalloc_end; |
| cur_offset = delalloc_end + 1; |
| extent_offset += cur_offset - delalloc_start; |
| cond_resched(); |
| } |
| |
| /* |
| * Either we found no delalloc for the whole prealloc extent or we have |
| * a prealloc extent that spans i_size or starts at or after i_size. |
| */ |
| if (disk_bytenr != 0 && last_delalloc_end < end) { |
| u64 prealloc_start; |
| u64 prealloc_len; |
| |
| if (last_delalloc_end == 0) { |
| prealloc_start = start; |
| prealloc_len = end + 1 - start; |
| } else { |
| prealloc_start = last_delalloc_end + 1; |
| prealloc_len = end + 1 - prealloc_start; |
| } |
| |
| if (!checked_extent_shared && fieinfo->fi_extents_max) { |
| ret = btrfs_is_data_extent_shared(inode, |
| disk_bytenr, |
| extent_gen, |
| backref_ctx); |
| if (ret < 0) |
| return ret; |
| else if (ret > 0) |
| prealloc_flags |= FIEMAP_EXTENT_SHARED; |
| } |
| ret = emit_fiemap_extent(fieinfo, cache, prealloc_start, |
| disk_bytenr + extent_offset, |
| prealloc_len, prealloc_flags); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fiemap_find_last_extent_offset(struct btrfs_inode *inode, |
| struct btrfs_path *path, |
| u64 *last_extent_end_ret) |
| { |
| const u64 ino = btrfs_ino(inode); |
| struct btrfs_root *root = inode->root; |
| struct extent_buffer *leaf; |
| struct btrfs_file_extent_item *ei; |
| struct btrfs_key key; |
| u64 disk_bytenr; |
| int ret; |
| |
| /* |
| * Lookup the last file extent. We're not using i_size here because |
| * there might be preallocation past i_size. |
| */ |
| ret = btrfs_lookup_file_extent(NULL, root, path, ino, (u64)-1, 0); |
| /* There can't be a file extent item at offset (u64)-1 */ |
| ASSERT(ret != 0); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * For a non-existing key, btrfs_search_slot() always leaves us at a |
| * slot > 0, except if the btree is empty, which is impossible because |
| * at least it has the inode item for this inode and all the items for |
| * the root inode 256. |
| */ |
| ASSERT(path->slots[0] > 0); |
| path->slots[0]--; |
| leaf = path->nodes[0]; |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); |
| if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY) { |
| /* No file extent items in the subvolume tree. */ |
| *last_extent_end_ret = 0; |
| return 0; |
| } |
| |
| /* |
| * For an inline extent, the disk_bytenr is where inline data starts at, |
| * so first check if we have an inline extent item before checking if we |
| * have an implicit hole (disk_bytenr == 0). |
| */ |
| ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); |
| if (btrfs_file_extent_type(leaf, ei) == BTRFS_FILE_EXTENT_INLINE) { |
| *last_extent_end_ret = btrfs_file_extent_end(path); |
| return 0; |
| } |
| |
| /* |
| * Find the last file extent item that is not a hole (when NO_HOLES is |
| * not enabled). This should take at most 2 iterations in the worst |
| * case: we have one hole file extent item at slot 0 of a leaf and |
| * another hole file extent item as the last item in the previous leaf. |
| * This is because we merge file extent items that represent holes. |
| */ |
| disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, ei); |
| while (disk_bytenr == 0) { |
| ret = btrfs_previous_item(root, path, ino, BTRFS_EXTENT_DATA_KEY); |
| if (ret < 0) { |
| return ret; |
| } else if (ret > 0) { |
| /* No file extent items that are not holes. */ |
| *last_extent_end_ret = 0; |
| return 0; |
| } |
| leaf = path->nodes[0]; |
| ei = btrfs_item_ptr(leaf, path->slots[0], |
| struct btrfs_file_extent_item); |
| disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, ei); |
| } |
| |
| *last_extent_end_ret = btrfs_file_extent_end(path); |
| return 0; |
| } |
| |
| int extent_fiemap(struct btrfs_inode *inode, struct fiemap_extent_info *fieinfo, |
| u64 start, u64 len) |
| { |
| const u64 ino = btrfs_ino(inode); |
| struct extent_state *cached_state = NULL; |
| struct extent_state *delalloc_cached_state = NULL; |
| struct btrfs_path *path; |
| struct fiemap_cache cache = { 0 }; |
| struct btrfs_backref_share_check_ctx *backref_ctx; |
| u64 last_extent_end; |
| u64 prev_extent_end; |
| u64 range_start; |
| u64 range_end; |
| const u64 sectorsize = inode->root->fs_info->sectorsize; |
| bool stopped = false; |
| int ret; |
| |
| cache.entries_size = PAGE_SIZE / sizeof(struct btrfs_fiemap_entry); |
| cache.entries = kmalloc_array(cache.entries_size, |
| sizeof(struct btrfs_fiemap_entry), |
| GFP_KERNEL); |
| backref_ctx = btrfs_alloc_backref_share_check_ctx(); |
| path = btrfs_alloc_path(); |
| if (!cache.entries || !backref_ctx || !path) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| restart: |
| range_start = round_down(start, sectorsize); |
| range_end = round_up(start + len, sectorsize); |
| prev_extent_end = range_start; |
| |
| lock_extent(&inode->io_tree, range_start, range_end, &cached_state); |
| |
| ret = fiemap_find_last_extent_offset(inode, path, &last_extent_end); |
| if (ret < 0) |
| goto out_unlock; |
| btrfs_release_path(path); |
| |
| path->reada = READA_FORWARD; |
| ret = fiemap_search_slot(inode, path, range_start); |
| if (ret < 0) { |
| goto out_unlock; |
| } else if (ret > 0) { |
| /* |
| * No file extent item found, but we may have delalloc between |
| * the current offset and i_size. So check for that. |
| */ |
| ret = 0; |
| goto check_eof_delalloc; |
| } |
| |
| while (prev_extent_end < range_end) { |
| struct extent_buffer *leaf = path->nodes[0]; |
| struct btrfs_file_extent_item *ei; |
| struct btrfs_key key; |
| u64 extent_end; |
| u64 extent_len; |
| u64 extent_offset = 0; |
| u64 extent_gen; |
| u64 disk_bytenr = 0; |
| u64 flags = 0; |
| int extent_type; |
| u8 compression; |
| |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); |
| if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY) |
| break; |
| |
| extent_end = btrfs_file_extent_end(path); |
| |
| /* |
| * The first iteration can leave us at an extent item that ends |
| * before our range's start. Move to the next item. |
| */ |
| if (extent_end <= range_start) |
| goto next_item; |
| |
| backref_ctx->curr_leaf_bytenr = leaf->start; |
| |
| /* We have in implicit hole (NO_HOLES feature enabled). */ |
| if (prev_extent_end < key.offset) { |
| const u64 hole_end = min(key.offset, range_end) - 1; |
| |
| ret = fiemap_process_hole(inode, fieinfo, &cache, |
| &delalloc_cached_state, |
| backref_ctx, 0, 0, 0, |
| prev_extent_end, hole_end); |
| if (ret < 0) { |
| goto out_unlock; |
| } else if (ret > 0) { |
| /* fiemap_fill_next_extent() told us to stop. */ |
| stopped = true; |
| break; |
| } |
| |
| /* We've reached the end of the fiemap range, stop. */ |
| if (key.offset >= range_end) { |
| stopped = true; |
| break; |
| } |
| } |
| |
| extent_len = extent_end - key.offset; |
| ei = btrfs_item_ptr(leaf, path->slots[0], |
| struct btrfs_file_extent_item); |
| compression = btrfs_file_extent_compression(leaf, ei); |
| extent_type = btrfs_file_extent_type(leaf, ei); |
| extent_gen = btrfs_file_extent_generation(leaf, ei); |
| |
| if (extent_type != BTRFS_FILE_EXTENT_INLINE) { |
| disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, ei); |
| if (compression == BTRFS_COMPRESS_NONE) |
| extent_offset = btrfs_file_extent_offset(leaf, ei); |
| } |
| |
| if (compression != BTRFS_COMPRESS_NONE) |
| flags |= FIEMAP_EXTENT_ENCODED; |
| |
| if (extent_type == BTRFS_FILE_EXTENT_INLINE) { |
| flags |= FIEMAP_EXTENT_DATA_INLINE; |
| flags |= FIEMAP_EXTENT_NOT_ALIGNED; |
| ret = emit_fiemap_extent(fieinfo, &cache, key.offset, 0, |
| extent_len, flags); |
| } else if (extent_type == BTRFS_FILE_EXTENT_PREALLOC) { |
| ret = fiemap_process_hole(inode, fieinfo, &cache, |
| &delalloc_cached_state, |
| backref_ctx, |
| disk_bytenr, extent_offset, |
| extent_gen, key.offset, |
| extent_end - 1); |
| } else if (disk_bytenr == 0) { |
| /* We have an explicit hole. */ |
| ret = fiemap_process_hole(inode, fieinfo, &cache, |
| &delalloc_cached_state, |
| backref_ctx, 0, 0, 0, |
| key.offset, extent_end - 1); |
| } else { |
| /* We have a regular extent. */ |
| if (fieinfo->fi_extents_max) { |
| ret = btrfs_is_data_extent_shared(inode, |
| disk_bytenr, |
| extent_gen, |
| backref_ctx); |
| if (ret < 0) |
| goto out_unlock; |
| else if (ret > 0) |
| flags |= FIEMAP_EXTENT_SHARED; |
| } |
| |
| ret = emit_fiemap_extent(fieinfo, &cache, key.offset, |
| disk_bytenr + extent_offset, |
| extent_len, flags); |
| } |
| |
| if (ret < 0) { |
| goto out_unlock; |
| } else if (ret > 0) { |
| /* emit_fiemap_extent() told us to stop. */ |
| stopped = true; |
| break; |
| } |
| |
| prev_extent_end = extent_end; |
| next_item: |
| if (fatal_signal_pending(current)) { |
| ret = -EINTR; |
| goto out_unlock; |
| } |
| |
| ret = fiemap_next_leaf_item(inode, path); |
| if (ret < 0) { |
| goto out_unlock; |
| } else if (ret > 0) { |
| /* No more file extent items for this inode. */ |
| break; |
| } |
| cond_resched(); |
| } |
| |
| check_eof_delalloc: |
| if (!stopped && prev_extent_end < range_end) { |
| ret = fiemap_process_hole(inode, fieinfo, &cache, |
| &delalloc_cached_state, backref_ctx, |
| 0, 0, 0, prev_extent_end, range_end - 1); |
| if (ret < 0) |
| goto out_unlock; |
| prev_extent_end = range_end; |
| } |
| |
| if (cache.cached && cache.offset + cache.len >= last_extent_end) { |
| const u64 i_size = i_size_read(&inode->vfs_inode); |
| |
| if (prev_extent_end < i_size) { |
| u64 delalloc_start; |
| u64 delalloc_end; |
| bool delalloc; |
| |
| delalloc = btrfs_find_delalloc_in_range(inode, |
| prev_extent_end, |
| i_size - 1, |
| &delalloc_cached_state, |
| &delalloc_start, |
| &delalloc_end); |
| if (!delalloc) |
| cache.flags |= FIEMAP_EXTENT_LAST; |
| } else { |
| cache.flags |= FIEMAP_EXTENT_LAST; |
| } |
| } |
| |
| out_unlock: |
| unlock_extent(&inode->io_tree, range_start, range_end, &cached_state); |
| |
| if (ret == BTRFS_FIEMAP_FLUSH_CACHE) { |
| btrfs_release_path(path); |
| ret = flush_fiemap_cache(fieinfo, &cache); |
| if (ret) |
| goto out; |
| len -= cache.next_search_offset - start; |
| start = cache.next_search_offset; |
| goto restart; |
| } else if (ret < 0) { |
| goto out; |
| } |
| |
| /* |
| * Must free the path before emitting to the fiemap buffer because we |
| * may have a non-cloned leaf and if the fiemap buffer is memory mapped |
| * to a file, a write into it (through btrfs_page_mkwrite()) may trigger |
| * waiting for an ordered extent that in order to complete needs to |
| * modify that leaf, therefore leading to a deadlock. |
| */ |
| btrfs_free_path(path); |
| path = NULL; |
| |
| ret = flush_fiemap_cache(fieinfo, &cache); |
| if (ret) |
| goto out; |
| |
| ret = emit_last_fiemap_cache(fieinfo, &cache); |
| out: |
| free_extent_state(delalloc_cached_state); |
| kfree(cache.entries); |
| btrfs_free_backref_share_ctx(backref_ctx); |
| btrfs_free_path(path); |
| return ret; |
| } |
| |
| static void __free_extent_buffer(struct extent_buffer *eb) |
| { |
| kmem_cache_free(extent_buffer_cache, eb); |
| } |
| |
| static int extent_buffer_under_io(const struct extent_buffer *eb) |
| { |
| return (test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags) || |
| test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)); |
| } |
| |
| static bool folio_range_has_eb(struct btrfs_fs_info *fs_info, struct folio *folio) |
| { |
| struct btrfs_subpage *subpage; |
| |
| lockdep_assert_held(&folio->mapping->i_private_lock); |
| |
| if (folio_test_private(folio)) { |
| subpage = folio_get_private(folio); |
| if (atomic_read(&subpage->eb_refs)) |
| return true; |
| /* |
| * Even there is no eb refs here, we may still have |
| * end_page_read() call relying on page::private. |
| */ |
| if (atomic_read(&subpage->readers)) |
| return true; |
| } |
| return false; |
| } |
| |
| static void detach_extent_buffer_folio(struct extent_buffer *eb, struct folio *folio) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| const bool mapped = !test_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags); |
| |
| /* |
| * For mapped eb, we're going to change the folio private, which should |
| * be done under the i_private_lock. |
| */ |
| if (mapped) |
| spin_lock(&folio->mapping->i_private_lock); |
| |
| if (!folio_test_private(folio)) { |
| if (mapped) |
| spin_unlock(&folio->mapping->i_private_lock); |
| return; |
| } |
| |
| if (fs_info->nodesize >= PAGE_SIZE) { |
| /* |
| * We do this since we'll remove the pages after we've |
| * removed the eb from the radix tree, so we could race |
| * and have this page now attached to the new eb. So |
| * only clear folio if it's still connected to |
| * this eb. |
| */ |
| if (folio_test_private(folio) && folio_get_private(folio) == eb) { |
| BUG_ON(test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)); |
| BUG_ON(folio_test_dirty(folio)); |
| BUG_ON(folio_test_writeback(folio)); |
| /* We need to make sure we haven't be attached to a new eb. */ |
| folio_detach_private(folio); |
| } |
| if (mapped) |
| spin_unlock(&folio->mapping->i_private_lock); |
| return; |
| } |
| |
| /* |
| * For subpage, we can have dummy eb with folio private attached. In |
| * this case, we can directly detach the private as such folio is only |
| * attached to one dummy eb, no sharing. |
| */ |
| if (!mapped) { |
| btrfs_detach_subpage(fs_info, folio); |
| return; |
| } |
| |
| btrfs_folio_dec_eb_refs(fs_info, folio); |
| |
| /* |
| * We can only detach the folio private if there are no other ebs in the |
| * page range and no unfinished IO. |
| */ |
| if (!folio_range_has_eb(fs_info, folio)) |
| btrfs_detach_subpage(fs_info, folio); |
| |
| spin_unlock(&folio->mapping->i_private_lock); |
| } |
| |
| /* Release all pages attached to the extent buffer */ |
| static void btrfs_release_extent_buffer_pages(struct extent_buffer *eb) |
| { |
| ASSERT(!extent_buffer_under_io(eb)); |
| |
| for (int i = 0; i < INLINE_EXTENT_BUFFER_PAGES; i++) { |
| struct folio *folio = eb->folios[i]; |
| |
| if (!folio) |
| continue; |
| |
| detach_extent_buffer_folio(eb, folio); |
| |
| /* One for when we allocated the folio. */ |
| folio_put(folio); |
| } |
| } |
| |
| /* |
| * Helper for releasing the extent buffer. |
| */ |
| static inline void btrfs_release_extent_buffer(struct extent_buffer *eb) |
| { |
| btrfs_release_extent_buffer_pages(eb); |
| btrfs_leak_debug_del_eb(eb); |
| __free_extent_buffer(eb); |
| } |
| |
| static struct extent_buffer * |
| __alloc_extent_buffer(struct btrfs_fs_info *fs_info, u64 start, |
| unsigned long len) |
| { |
| struct extent_buffer *eb = NULL; |
| |
| eb = kmem_cache_zalloc(extent_buffer_cache, GFP_NOFS|__GFP_NOFAIL); |
| eb->start = start; |
| eb->len = len; |
| eb->fs_info = fs_info; |
| init_rwsem(&eb->lock); |
| |
| btrfs_leak_debug_add_eb(eb); |
| |
| spin_lock_init(&eb->refs_lock); |
| atomic_set(&eb->refs, 1); |
| |
| ASSERT(len <= BTRFS_MAX_METADATA_BLOCKSIZE); |
| |
| return eb; |
| } |
| |
| struct extent_buffer *btrfs_clone_extent_buffer(const struct extent_buffer *src) |
| { |
| struct extent_buffer *new; |
| int num_folios = num_extent_folios(src); |
| int ret; |
| |
| new = __alloc_extent_buffer(src->fs_info, src->start, src->len); |
| if (new == NULL) |
| return NULL; |
| |
| /* |
| * Set UNMAPPED before calling btrfs_release_extent_buffer(), as |
| * btrfs_release_extent_buffer() have different behavior for |
| * UNMAPPED subpage extent buffer. |
| */ |
| set_bit(EXTENT_BUFFER_UNMAPPED, &new->bflags); |
| |
| ret = alloc_eb_folio_array(new, 0); |
| if (ret) { |
| btrfs_release_extent_buffer(new); |
| return NULL; |
| } |
| |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = new->folios[i]; |
| int ret; |
| |
| ret = attach_extent_buffer_folio(new, folio, NULL); |
| if (ret < 0) { |
| btrfs_release_extent_buffer(new); |
| return NULL; |
| } |
| WARN_ON(folio_test_dirty(folio)); |
| } |
| copy_extent_buffer_full(new, src); |
| set_extent_buffer_uptodate(new); |
| |
| return new; |
| } |
| |
| struct extent_buffer *__alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info, |
| u64 start, unsigned long len) |
| { |
| struct extent_buffer *eb; |
| int num_folios = 0; |
| int ret; |
| |
| eb = __alloc_extent_buffer(fs_info, start, len); |
| if (!eb) |
| return NULL; |
| |
| ret = alloc_eb_folio_array(eb, 0); |
| if (ret) |
| goto err; |
| |
| num_folios = num_extent_folios(eb); |
| for (int i = 0; i < num_folios; i++) { |
| ret = attach_extent_buffer_folio(eb, eb->folios[i], NULL); |
| if (ret < 0) |
| goto err; |
| } |
| |
| set_extent_buffer_uptodate(eb); |
| btrfs_set_header_nritems(eb, 0); |
| set_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags); |
| |
| return eb; |
| err: |
| for (int i = 0; i < num_folios; i++) { |
| if (eb->folios[i]) { |
| detach_extent_buffer_folio(eb, eb->folios[i]); |
| __folio_put(eb->folios[i]); |
| } |
| } |
| __free_extent_buffer(eb); |
| return NULL; |
| } |
| |
| struct extent_buffer *alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info, |
| u64 start) |
| { |
| return __alloc_dummy_extent_buffer(fs_info, start, fs_info->nodesize); |
| } |
| |
| static void check_buffer_tree_ref(struct extent_buffer *eb) |
| { |
| int refs; |
| /* |
| * The TREE_REF bit is first set when the extent_buffer is added |
| * to the radix tree. It is also reset, if unset, when a new reference |
| * is created by find_extent_buffer. |
| * |
| * It is only cleared in two cases: freeing the last non-tree |
| * reference to the extent_buffer when its STALE bit is set or |
| * calling release_folio when the tree reference is the only reference. |
| * |
| * In both cases, care is taken to ensure that the extent_buffer's |
| * pages are not under io. However, release_folio can be concurrently |
| * called with creating new references, which is prone to race |
| * conditions between the calls to check_buffer_tree_ref in those |
| * codepaths and clearing TREE_REF in try_release_extent_buffer. |
| * |
| * The actual lifetime of the extent_buffer in the radix tree is |
| * adequately protected by the refcount, but the TREE_REF bit and |
| * its corresponding reference are not. To protect against this |
| * class of races, we call check_buffer_tree_ref from the codepaths |
| * which trigger io. Note that once io is initiated, TREE_REF can no |
| * longer be cleared, so that is the moment at which any such race is |
| * best fixed. |
| */ |
| refs = atomic_read(&eb->refs); |
| if (refs >= 2 && test_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) |
| return; |
| |
| spin_lock(&eb->refs_lock); |
| if (!test_and_set_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) |
| atomic_inc(&eb->refs); |
| spin_unlock(&eb->refs_lock); |
| } |
| |
| static void mark_extent_buffer_accessed(struct extent_buffer *eb) |
| { |
| int num_folios= num_extent_folios(eb); |
| |
| check_buffer_tree_ref(eb); |
| |
| for (int i = 0; i < num_folios; i++) |
| folio_mark_accessed(eb->folios[i]); |
| } |
| |
| struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info, |
| u64 start) |
| { |
| struct extent_buffer *eb; |
| |
| eb = find_extent_buffer_nolock(fs_info, start); |
| if (!eb) |
| return NULL; |
| /* |
| * Lock our eb's refs_lock to avoid races with free_extent_buffer(). |
| * When we get our eb it might be flagged with EXTENT_BUFFER_STALE and |
| * another task running free_extent_buffer() might have seen that flag |
| * set, eb->refs == 2, that the buffer isn't under IO (dirty and |
| * writeback flags not set) and it's still in the tree (flag |
| * EXTENT_BUFFER_TREE_REF set), therefore being in the process of |
| * decrementing the extent buffer's reference count twice. So here we |
| * could race and increment the eb's reference count, clear its stale |
| * flag, mark it as dirty and drop our reference before the other task |
| * finishes executing free_extent_buffer, which would later result in |
| * an attempt to free an extent buffer that is dirty. |
| */ |
| if (test_bit(EXTENT_BUFFER_STALE, &eb->bflags)) { |
| spin_lock(&eb->refs_lock); |
| spin_unlock(&eb->refs_lock); |
| } |
| mark_extent_buffer_accessed(eb); |
| return eb; |
| } |
| |
| #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS |
| struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info, |
| u64 start) |
| { |
| struct extent_buffer *eb, *exists = NULL; |
| int ret; |
| |
| eb = find_extent_buffer(fs_info, start); |
| if (eb) |
| return eb; |
| eb = alloc_dummy_extent_buffer(fs_info, start); |
| if (!eb) |
| return ERR_PTR(-ENOMEM); |
| eb->fs_info = fs_info; |
| again: |
| ret = radix_tree_preload(GFP_NOFS); |
| if (ret) { |
| exists = ERR_PTR(ret); |
| goto free_eb; |
| } |
| spin_lock(&fs_info->buffer_lock); |
| ret = radix_tree_insert(&fs_info->buffer_radix, |
| start >> fs_info->sectorsize_bits, eb); |
| spin_unlock(&fs_info->buffer_lock); |
| radix_tree_preload_end(); |
| if (ret == -EEXIST) { |
| exists = find_extent_buffer(fs_info, start); |
| if (exists) |
| goto free_eb; |
| else |
| goto again; |
| } |
| check_buffer_tree_ref(eb); |
| set_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags); |
| |
| return eb; |
| free_eb: |
| btrfs_release_extent_buffer(eb); |
| return exists; |
| } |
| #endif |
| |
| static struct extent_buffer *grab_extent_buffer( |
| struct btrfs_fs_info *fs_info, struct page *page) |
| { |
| struct folio *folio = page_folio(page); |
| struct extent_buffer *exists; |
| |
| /* |
| * For subpage case, we completely rely on radix tree to ensure we |
| * don't try to insert two ebs for the same bytenr. So here we always |
| * return NULL and just continue. |
| */ |
| if (fs_info->nodesize < PAGE_SIZE) |
| return NULL; |
| |
| /* Page not yet attached to an extent buffer */ |
| if (!folio_test_private(folio)) |
| return NULL; |
| |
| /* |
| * We could have already allocated an eb for this page and attached one |
| * so lets see if we can get a ref on the existing eb, and if we can we |
| * know it's good and we can just return that one, else we know we can |
| * just overwrite folio private. |
| */ |
| exists = folio_get_private(folio); |
| if (atomic_inc_not_zero(&exists->refs)) |
| return exists; |
| |
| WARN_ON(PageDirty(page)); |
| folio_detach_private(folio); |
| return NULL; |
| } |
| |
| static int check_eb_alignment(struct btrfs_fs_info *fs_info, u64 start) |
| { |
| if (!IS_ALIGNED(start, fs_info->sectorsize)) { |
| btrfs_err(fs_info, "bad tree block start %llu", start); |
| return -EINVAL; |
| } |
| |
| if (fs_info->nodesize < PAGE_SIZE && |
| offset_in_page(start) + fs_info->nodesize > PAGE_SIZE) { |
| btrfs_err(fs_info, |
| "tree block crosses page boundary, start %llu nodesize %u", |
| start, fs_info->nodesize); |
| return -EINVAL; |
| } |
| if (fs_info->nodesize >= PAGE_SIZE && |
| !PAGE_ALIGNED(start)) { |
| btrfs_err(fs_info, |
| "tree block is not page aligned, start %llu nodesize %u", |
| start, fs_info->nodesize); |
| return -EINVAL; |
| } |
| if (!IS_ALIGNED(start, fs_info->nodesize) && |
| !test_and_set_bit(BTRFS_FS_UNALIGNED_TREE_BLOCK, &fs_info->flags)) { |
| btrfs_warn(fs_info, |
| "tree block not nodesize aligned, start %llu nodesize %u, can be resolved by a full metadata balance", |
| start, fs_info->nodesize); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Return 0 if eb->folios[i] is attached to btree inode successfully. |
| * Return >0 if there is already another extent buffer for the range, |
| * and @found_eb_ret would be updated. |
| * Return -EAGAIN if the filemap has an existing folio but with different size |
| * than @eb. |
| * The caller needs to free the existing folios and retry using the same order. |
| */ |
| static int attach_eb_folio_to_filemap(struct extent_buffer *eb, int i, |
| struct extent_buffer **found_eb_ret) |
| { |
| |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| struct address_space *mapping = fs_info->btree_inode->i_mapping; |
| const unsigned long index = eb->start >> PAGE_SHIFT; |
| struct folio *existing_folio; |
| int ret; |
| |
| ASSERT(found_eb_ret); |
| |
| /* Caller should ensure the folio exists. */ |
| ASSERT(eb->folios[i]); |
| |
| retry: |
| ret = filemap_add_folio(mapping, eb->folios[i], index + i, |
| GFP_NOFS | __GFP_NOFAIL); |
| if (!ret) |
| return 0; |
| |
| existing_folio = filemap_lock_folio(mapping, index + i); |
| /* The page cache only exists for a very short time, just retry. */ |
| if (IS_ERR(existing_folio)) |
| goto retry; |
| |
| /* For now, we should only have single-page folios for btree inode. */ |
| ASSERT(folio_nr_pages(existing_folio) == 1); |
| |
| if (folio_size(existing_folio) != eb->folio_size) { |
| folio_unlock(existing_folio); |
| folio_put(existing_folio); |
| return -EAGAIN; |
| } |
| |
| if (fs_info->nodesize < PAGE_SIZE) { |
| /* |
| * We're going to reuse the existing page, can drop our page |
| * and subpage structure now. |
| */ |
| __free_page(folio_page(eb->folios[i], 0)); |
| eb->folios[i] = existing_folio; |
| } else { |
| struct extent_buffer *existing_eb; |
| |
| existing_eb = grab_extent_buffer(fs_info, |
| folio_page(existing_folio, 0)); |
| if (existing_eb) { |
| /* The extent buffer still exists, we can use it directly. */ |
| *found_eb_ret = existing_eb; |
| folio_unlock(existing_folio); |
| folio_put(existing_folio); |
| return 1; |
| } |
| /* The extent buffer no longer exists, we can reuse the folio. */ |
| __free_page(folio_page(eb->folios[i], 0)); |
| eb->folios[i] = existing_folio; |
| } |
| return 0; |
| } |
| |
| struct extent_buffer *alloc_extent_buffer(struct btrfs_fs_info *fs_info, |
| u64 start, u64 owner_root, int level) |
| { |
| unsigned long len = fs_info->nodesize; |
| int num_folios; |
| int attached = 0; |
| struct extent_buffer *eb; |
| struct extent_buffer *existing_eb = NULL; |
| struct address_space *mapping = fs_info->btree_inode->i_mapping; |
| struct btrfs_subpage *prealloc = NULL; |
| u64 lockdep_owner = owner_root; |
| bool page_contig = true; |
| int uptodate = 1; |
| int ret; |
| |
| if (check_eb_alignment(fs_info, start)) |
| return ERR_PTR(-EINVAL); |
| |
| #if BITS_PER_LONG == 32 |
| if (start >= MAX_LFS_FILESIZE) { |
| btrfs_err_rl(fs_info, |
| "extent buffer %llu is beyond 32bit page cache limit", start); |
| btrfs_err_32bit_limit(fs_info); |
| return ERR_PTR(-EOVERFLOW); |
| } |
| if (start >= BTRFS_32BIT_EARLY_WARN_THRESHOLD) |
| btrfs_warn_32bit_limit(fs_info); |
| #endif |
| |
| eb = find_extent_buffer(fs_info, start); |
| if (eb) |
| return eb; |
| |
| eb = __alloc_extent_buffer(fs_info, start, len); |
| if (!eb) |
| return ERR_PTR(-ENOMEM); |
| |
| /* |
| * The reloc trees are just snapshots, so we need them to appear to be |
| * just like any other fs tree WRT lockdep. |
| */ |
| if (lockdep_owner == BTRFS_TREE_RELOC_OBJECTID) |
| lockdep_owner = BTRFS_FS_TREE_OBJECTID; |
| |
| btrfs_set_buffer_lockdep_class(lockdep_owner, eb, level); |
| |
| /* |
| * Preallocate folio private for subpage case, so that we won't |
| * allocate memory with i_private_lock nor page lock hold. |
| * |
| * The memory will be freed by attach_extent_buffer_page() or freed |
| * manually if we exit earlier. |
| */ |
| if (fs_info->nodesize < PAGE_SIZE) { |
| prealloc = btrfs_alloc_subpage(fs_info, BTRFS_SUBPAGE_METADATA); |
| if (IS_ERR(prealloc)) { |
| ret = PTR_ERR(prealloc); |
| goto out; |
| } |
| } |
| |
| reallocate: |
| /* Allocate all pages first. */ |
| ret = alloc_eb_folio_array(eb, __GFP_NOFAIL); |
| if (ret < 0) { |
| btrfs_free_subpage(prealloc); |
| goto out; |
| } |
| |
| num_folios = num_extent_folios(eb); |
| /* Attach all pages to the filemap. */ |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio; |
| |
| ret = attach_eb_folio_to_filemap(eb, i, &existing_eb); |
| if (ret > 0) { |
| ASSERT(existing_eb); |
| goto out; |
| } |
| |
| /* |
| * TODO: Special handling for a corner case where the order of |
| * folios mismatch between the new eb and filemap. |
| * |
| * This happens when: |
| * |
| * - the new eb is using higher order folio |
| * |
| * - the filemap is still using 0-order folios for the range |
| * This can happen at the previous eb allocation, and we don't |
| * have higher order folio for the call. |
| * |
| * - the existing eb has already been freed |
| * |
| * In this case, we have to free the existing folios first, and |
| * re-allocate using the same order. |
| * Thankfully this is not going to happen yet, as we're still |
| * using 0-order folios. |
| */ |
| if (unlikely(ret == -EAGAIN)) { |
| ASSERT(0); |
| goto reallocate; |
| } |
| attached++; |
| |
| /* |
| * Only after attach_eb_folio_to_filemap(), eb->folios[] is |
| * reliable, as we may choose to reuse the existing page cache |
| * and free the allocated page. |
| */ |
| folio = eb->folios[i]; |
| eb->folio_size = folio_size(folio); |
| eb->folio_shift = folio_shift(folio); |
| spin_lock(&mapping->i_private_lock); |
| /* Should not fail, as we have preallocated the memory */ |
| ret = attach_extent_buffer_folio(eb, folio, prealloc); |
| ASSERT(!ret); |
| /* |
| * To inform we have extra eb under allocation, so that |
| * detach_extent_buffer_page() won't release the folio private |
| * when the eb hasn't yet been inserted into radix tree. |
| * |
| * The ref will be decreased when the eb released the page, in |
| * detach_extent_buffer_page(). |
| * Thus needs no special handling in error path. |
| */ |
| btrfs_folio_inc_eb_refs(fs_info, folio); |
| spin_unlock(&mapping->i_private_lock); |
| |
| WARN_ON(btrfs_folio_test_dirty(fs_info, folio, eb->start, eb->len)); |
| |
| /* |
| * Check if the current page is physically contiguous with previous eb |
| * page. |
| * At this stage, either we allocated a large folio, thus @i |
| * would only be 0, or we fall back to per-page allocation. |
| */ |
| if (i && folio_page(eb->folios[i - 1], 0) + 1 != folio_page(folio, 0)) |
| page_contig = false; |
| |
| if (!btrfs_folio_test_uptodate(fs_info, folio, eb->start, eb->len)) |
| uptodate = 0; |
| |
| /* |
| * We can't unlock the pages just yet since the extent buffer |
| * hasn't been properly inserted in the radix tree, this |
| * opens a race with btree_release_folio which can free a page |
| * while we are still filling in all pages for the buffer and |
| * we could crash. |
| */ |
| } |
| if (uptodate) |
| set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags); |
| /* All pages are physically contiguous, can skip cross page handling. */ |
| if (page_contig) |
| eb->addr = folio_address(eb->folios[0]) + offset_in_page(eb->start); |
| again: |
| ret = radix_tree_preload(GFP_NOFS); |
| if (ret) |
| goto out; |
| |
| spin_lock(&fs_info->buffer_lock); |
| ret = radix_tree_insert(&fs_info->buffer_radix, |
| start >> fs_info->sectorsize_bits, eb); |
| spin_unlock(&fs_info->buffer_lock); |
| radix_tree_preload_end(); |
| if (ret == -EEXIST) { |
| ret = 0; |
| existing_eb = find_extent_buffer(fs_info, start); |
| if (existing_eb) |
| goto out; |
| else |
| goto again; |
| } |
| /* add one reference for the tree */ |
| check_buffer_tree_ref(eb); |
| set_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags); |
| |
| /* |
| * Now it's safe to unlock the pages because any calls to |
| * btree_release_folio will correctly detect that a page belongs to a |
| * live buffer and won't free them prematurely. |
| */ |
| for (int i = 0; i < num_folios; i++) |
| unlock_page(folio_page(eb->folios[i], 0)); |
| return eb; |
| |
| out: |
| WARN_ON(!atomic_dec_and_test(&eb->refs)); |
| |
| /* |
| * Any attached folios need to be detached before we unlock them. This |
| * is because when we're inserting our new folios into the mapping, and |
| * then attaching our eb to that folio. If we fail to insert our folio |
| * we'll lookup the folio for that index, and grab that EB. We do not |
| * want that to grab this eb, as we're getting ready to free it. So we |
| * have to detach it first and then unlock it. |
| * |
| * We have to drop our reference and NULL it out here because in the |
| * subpage case detaching does a btrfs_folio_dec_eb_refs() for our eb. |
| * Below when we call btrfs_release_extent_buffer() we will call |
| * detach_extent_buffer_folio() on our remaining pages in the !subpage |
| * case. If we left eb->folios[i] populated in the subpage case we'd |
| * double put our reference and be super sad. |
| */ |
| for (int i = 0; i < attached; i++) { |
| ASSERT(eb->folios[i]); |
| detach_extent_buffer_folio(eb, eb->folios[i]); |
| unlock_page(folio_page(eb->folios[i], 0)); |
| folio_put(eb->folios[i]); |
| eb->folios[i] = NULL; |
| } |
| /* |
| * Now all pages of that extent buffer is unmapped, set UNMAPPED flag, |
| * so it can be cleaned up without utlizing page->mapping. |
| */ |
| set_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags); |
| |
| btrfs_release_extent_buffer(eb); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| ASSERT(existing_eb); |
| return existing_eb; |
| } |
| |
| static inline void btrfs_release_extent_buffer_rcu(struct rcu_head *head) |
| { |
| struct extent_buffer *eb = |
| container_of(head, struct extent_buffer, rcu_head); |
| |
| __free_extent_buffer(eb); |
| } |
| |
| static int release_extent_buffer(struct extent_buffer *eb) |
| __releases(&eb->refs_lock) |
| { |
| lockdep_assert_held(&eb->refs_lock); |
| |
| WARN_ON(atomic_read(&eb->refs) == 0); |
| if (atomic_dec_and_test(&eb->refs)) { |
| if (test_and_clear_bit(EXTENT_BUFFER_IN_TREE, &eb->bflags)) { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| |
| spin_unlock(&eb->refs_lock); |
| |
| spin_lock(&fs_info->buffer_lock); |
| radix_tree_delete(&fs_info->buffer_radix, |
| eb->start >> fs_info->sectorsize_bits); |
| spin_unlock(&fs_info->buffer_lock); |
| } else { |
| spin_unlock(&eb->refs_lock); |
| } |
| |
| btrfs_leak_debug_del_eb(eb); |
| /* Should be safe to release our pages at this point */ |
| btrfs_release_extent_buffer_pages(eb); |
| #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS |
| if (unlikely(test_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags))) { |
| __free_extent_buffer(eb); |
| return 1; |
| } |
| #endif |
| call_rcu(&eb->rcu_head, btrfs_release_extent_buffer_rcu); |
| return 1; |
| } |
| spin_unlock(&eb->refs_lock); |
| |
| return 0; |
| } |
| |
| void free_extent_buffer(struct extent_buffer *eb) |
| { |
| int refs; |
| if (!eb) |
| return; |
| |
| refs = atomic_read(&eb->refs); |
| while (1) { |
| if ((!test_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags) && refs <= 3) |
| || (test_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags) && |
| refs == 1)) |
| break; |
| if (atomic_try_cmpxchg(&eb->refs, &refs, refs - 1)) |
| return; |
| } |
| |
| spin_lock(&eb->refs_lock); |
| if (atomic_read(&eb->refs) == 2 && |
| test_bit(EXTENT_BUFFER_STALE, &eb->bflags) && |
| !extent_buffer_under_io(eb) && |
| test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) |
| atomic_dec(&eb->refs); |
| |
| /* |
| * I know this is terrible, but it's temporary until we stop tracking |
| * the uptodate bits and such for the extent buffers. |
| */ |
| release_extent_buffer(eb); |
| } |
| |
| void free_extent_buffer_stale(struct extent_buffer *eb) |
| { |
| if (!eb) |
| return; |
| |
| spin_lock(&eb->refs_lock); |
| set_bit(EXTENT_BUFFER_STALE, &eb->bflags); |
| |
| if (atomic_read(&eb->refs) == 2 && !extent_buffer_under_io(eb) && |
| test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) |
| atomic_dec(&eb->refs); |
| release_extent_buffer(eb); |
| } |
| |
| static void btree_clear_folio_dirty(struct folio *folio) |
| { |
| ASSERT(folio_test_dirty(folio)); |
| ASSERT(folio_test_locked(folio)); |
| folio_clear_dirty_for_io(folio); |
| xa_lock_irq(&folio->mapping->i_pages); |
| if (!folio_test_dirty(folio)) |
| __xa_clear_mark(&folio->mapping->i_pages, |
| folio_index(folio), PAGECACHE_TAG_DIRTY); |
| xa_unlock_irq(&folio->mapping->i_pages); |
| } |
| |
| static void clear_subpage_extent_buffer_dirty(const struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| struct folio *folio = eb->folios[0]; |
| bool last; |
| |
| /* btree_clear_folio_dirty() needs page locked. */ |
| folio_lock(folio); |
| last = btrfs_subpage_clear_and_test_dirty(fs_info, folio, eb->start, eb->len); |
| if (last) |
| btree_clear_folio_dirty(folio); |
| folio_unlock(folio); |
| WARN_ON(atomic_read(&eb->refs) == 0); |
| } |
| |
| void btrfs_clear_buffer_dirty(struct btrfs_trans_handle *trans, |
| struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| int num_folios; |
| |
| btrfs_assert_tree_write_locked(eb); |
| |
| if (trans && btrfs_header_generation(eb) != trans->transid) |
| return; |
| |
| /* |
| * Instead of clearing the dirty flag off of the buffer, mark it as |
| * EXTENT_BUFFER_ZONED_ZEROOUT. This allows us to preserve |
| * write-ordering in zoned mode, without the need to later re-dirty |
| * the extent_buffer. |
| * |
| * The actual zeroout of the buffer will happen later in |
| * btree_csum_one_bio. |
| */ |
| if (btrfs_is_zoned(fs_info)) { |
| set_bit(EXTENT_BUFFER_ZONED_ZEROOUT, &eb->bflags); |
| return; |
| } |
| |
| if (!test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) |
| return; |
| |
| percpu_counter_add_batch(&fs_info->dirty_metadata_bytes, -eb->len, |
| fs_info->dirty_metadata_batch); |
| |
| if (eb->fs_info->nodesize < PAGE_SIZE) |
| return clear_subpage_extent_buffer_dirty(eb); |
| |
| num_folios = num_extent_folios(eb); |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = eb->folios[i]; |
| |
| if (!folio_test_dirty(folio)) |
| continue; |
| folio_lock(folio); |
| btree_clear_folio_dirty(folio); |
| folio_unlock(folio); |
| } |
| WARN_ON(atomic_read(&eb->refs) == 0); |
| } |
| |
| void set_extent_buffer_dirty(struct extent_buffer *eb) |
| { |
| int num_folios; |
| bool was_dirty; |
| |
| check_buffer_tree_ref(eb); |
| |
| was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags); |
| |
| num_folios = num_extent_folios(eb); |
| WARN_ON(atomic_read(&eb->refs) == 0); |
| WARN_ON(!test_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)); |
| |
| if (!was_dirty) { |
| bool subpage = eb->fs_info->nodesize < PAGE_SIZE; |
| |
| /* |
| * For subpage case, we can have other extent buffers in the |
| * same page, and in clear_subpage_extent_buffer_dirty() we |
| * have to clear page dirty without subpage lock held. |
| * This can cause race where our page gets dirty cleared after |
| * we just set it. |
| * |
| * Thankfully, clear_subpage_extent_buffer_dirty() has locked |
| * its page for other reasons, we can use page lock to prevent |
| * the above race. |
| */ |
| if (subpage) |
| lock_page(folio_page(eb->folios[0], 0)); |
| for (int i = 0; i < num_folios; i++) |
| btrfs_folio_set_dirty(eb->fs_info, eb->folios[i], |
| eb->start, eb->len); |
| if (subpage) |
| unlock_page(folio_page(eb->folios[0], 0)); |
| percpu_counter_add_batch(&eb->fs_info->dirty_metadata_bytes, |
| eb->len, |
| eb->fs_info->dirty_metadata_batch); |
| } |
| #ifdef CONFIG_BTRFS_DEBUG |
| for (int i = 0; i < num_folios; i++) |
| ASSERT(folio_test_dirty(eb->folios[i])); |
| #endif |
| } |
| |
| void clear_extent_buffer_uptodate(struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| int num_folios = num_extent_folios(eb); |
| |
| clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags); |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = eb->folios[i]; |
| |
| if (!folio) |
| continue; |
| |
| /* |
| * This is special handling for metadata subpage, as regular |
| * btrfs_is_subpage() can not handle cloned/dummy metadata. |
| */ |
| if (fs_info->nodesize >= PAGE_SIZE) |
| folio_clear_uptodate(folio); |
| else |
| btrfs_subpage_clear_uptodate(fs_info, folio, |
| eb->start, eb->len); |
| } |
| } |
| |
| void set_extent_buffer_uptodate(struct extent_buffer *eb) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| int num_folios = num_extent_folios(eb); |
| |
| set_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags); |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = eb->folios[i]; |
| |
| /* |
| * This is special handling for metadata subpage, as regular |
| * btrfs_is_subpage() can not handle cloned/dummy metadata. |
| */ |
| if (fs_info->nodesize >= PAGE_SIZE) |
| folio_mark_uptodate(folio); |
| else |
| btrfs_subpage_set_uptodate(fs_info, folio, |
| eb->start, eb->len); |
| } |
| } |
| |
| static void end_bbio_meta_read(struct btrfs_bio *bbio) |
| { |
| struct extent_buffer *eb = bbio->private; |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| bool uptodate = !bbio->bio.bi_status; |
| struct folio_iter fi; |
| u32 bio_offset = 0; |
| |
| eb->read_mirror = bbio->mirror_num; |
| |
| if (uptodate && |
| btrfs_validate_extent_buffer(eb, &bbio->parent_check) < 0) |
| uptodate = false; |
| |
| if (uptodate) { |
| set_extent_buffer_uptodate(eb); |
| } else { |
| clear_extent_buffer_uptodate(eb); |
| set_bit(EXTENT_BUFFER_READ_ERR, &eb->bflags); |
| } |
| |
| bio_for_each_folio_all(fi, &bbio->bio) { |
| struct folio *folio = fi.folio; |
| u64 start = eb->start + bio_offset; |
| u32 len = fi.length; |
| |
| if (uptodate) |
| btrfs_folio_set_uptodate(fs_info, folio, start, len); |
| else |
| btrfs_folio_clear_uptodate(fs_info, folio, start, len); |
| |
| bio_offset += len; |
| } |
| |
| clear_bit(EXTENT_BUFFER_READING, &eb->bflags); |
| smp_mb__after_atomic(); |
| wake_up_bit(&eb->bflags, EXTENT_BUFFER_READING); |
| free_extent_buffer(eb); |
| |
| bio_put(&bbio->bio); |
| } |
| |
| int read_extent_buffer_pages(struct extent_buffer *eb, int wait, int mirror_num, |
| struct btrfs_tree_parent_check *check) |
| { |
| struct btrfs_bio *bbio; |
| bool ret; |
| |
| if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags)) |
| return 0; |
| |
| /* |
| * We could have had EXTENT_BUFFER_UPTODATE cleared by the write |
| * operation, which could potentially still be in flight. In this case |
| * we simply want to return an error. |
| */ |
| if (unlikely(test_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags))) |
| return -EIO; |
| |
| /* Someone else is already reading the buffer, just wait for it. */ |
| if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags)) |
| goto done; |
| |
| clear_bit(EXTENT_BUFFER_READ_ERR, &eb->bflags); |
| eb->read_mirror = 0; |
| check_buffer_tree_ref(eb); |
| atomic_inc(&eb->refs); |
| |
| bbio = btrfs_bio_alloc(INLINE_EXTENT_BUFFER_PAGES, |
| REQ_OP_READ | REQ_META, eb->fs_info, |
| end_bbio_meta_read, eb); |
| bbio->bio.bi_iter.bi_sector = eb->start >> SECTOR_SHIFT; |
| bbio->inode = BTRFS_I(eb->fs_info->btree_inode); |
| bbio->file_offset = eb->start; |
| memcpy(&bbio->parent_check, check, sizeof(*check)); |
| if (eb->fs_info->nodesize < PAGE_SIZE) { |
| ret = bio_add_folio(&bbio->bio, eb->folios[0], eb->len, |
| eb->start - folio_pos(eb->folios[0])); |
| ASSERT(ret); |
| } else { |
| int num_folios = num_extent_folios(eb); |
| |
| for (int i = 0; i < num_folios; i++) { |
| struct folio *folio = eb->folios[i]; |
| |
| ret = bio_add_folio(&bbio->bio, folio, eb->folio_size, 0); |
| ASSERT(ret); |
| } |
| } |
| btrfs_submit_bio(bbio, mirror_num); |
| |
| done: |
| if (wait == WAIT_COMPLETE) { |
| wait_on_bit_io(&eb->bflags, EXTENT_BUFFER_READING, TASK_UNINTERRUPTIBLE); |
| if (!test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags)) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static bool report_eb_range(const struct extent_buffer *eb, unsigned long start, |
| unsigned long len) |
| { |
| btrfs_warn(eb->fs_info, |
| "access to eb bytenr %llu len %u out of range start %lu len %lu", |
| eb->start, eb->len, start, len); |
| WARN_ON(IS_ENABLED(CONFIG_BTRFS_DEBUG)); |
| |
| return true; |
| } |
| |
| /* |
| * Check if the [start, start + len) range is valid before reading/writing |
| * the eb. |
| * NOTE: @start and @len are offset inside the eb, not logical address. |
| * |
| * Caller should not touch the dst/src memory if this function returns error. |
| */ |
| static inline int check_eb_range(const struct extent_buffer *eb, |
| unsigned long start, unsigned long len) |
| { |
| unsigned long offset; |
| |
| /* start, start + len should not go beyond eb->len nor overflow */ |
| if (unlikely(check_add_overflow(start, len, &offset) || offset > eb->len)) |
| return report_eb_range(eb, start, len); |
| |
| return false; |
| } |
| |
| void read_extent_buffer(const struct extent_buffer *eb, void *dstv, |
| unsigned long start, unsigned long len) |
| { |
| const int unit_size = eb->folio_size; |
| size_t cur; |
| size_t offset; |
| char *dst = (char *)dstv; |
| unsigned long i = get_eb_folio_index(eb, start); |
| |
| if (check_eb_range(eb, start, len)) { |
| /* |
| * Invalid range hit, reset the memory, so callers won't get |
| * some random garbage for their uninitialized memory. |
| */ |
| memset(dstv, 0, len); |
| return; |
| } |
| |
| if (eb->addr) { |
| memcpy(dstv, eb->addr + start, len); |
| return; |
| } |
| |
| offset = get_eb_offset_in_folio(eb, start); |
| |
| while (len > 0) { |
| char *kaddr; |
| |
| cur = min(len, unit_size - offset); |
| kaddr = folio_address(eb->folios[i]); |
| memcpy(dst, kaddr + offset, cur); |
| |
| dst += cur; |
| len -= cur; |
| offset = 0; |
| i++; |
| } |
| } |
| |
| int read_extent_buffer_to_user_nofault(const struct extent_buffer *eb, |
| void __user *dstv, |
| unsigned long start, unsigned long len) |
| { |
| const int unit_size = eb->folio_size; |
| size_t cur; |
| size_t offset; |
| char __user *dst = (char __user *)dstv; |
| unsigned long i = get_eb_folio_index(eb, start); |
| int ret = 0; |
| |
| WARN_ON(start > eb->len); |
| WARN_ON(start + len > eb->start + eb->len); |
| |
| if (eb->addr) { |
| if (copy_to_user_nofault(dstv, eb->addr + start, len)) |
| ret = -EFAULT; |
| return ret; |
| } |
| |
| offset = get_eb_offset_in_folio(eb, start); |
| |
| while (len > 0) { |
| char *kaddr; |
| |
| cur = min(len, unit_size - offset); |
| kaddr = folio_address(eb->folios[i]); |
| if (copy_to_user_nofault(dst, kaddr + offset, cur)) { |
| ret = -EFAULT; |
| break; |
| } |
| |
| dst += cur; |
| len -= cur; |
| offset = 0; |
| i++; |
| } |
| |
| return ret; |
| } |
| |
| int memcmp_extent_buffer(const struct extent_buffer *eb, const void *ptrv, |
| unsigned long start, unsigned long len) |
| { |
| const int unit_size = eb->folio_size; |
| size_t cur; |
| size_t offset; |
| char *kaddr; |
| char *ptr = (char *)ptrv; |
| unsigned long i = get_eb_folio_index(eb, start); |
| int ret = 0; |
| |
| if (check_eb_range(eb, start, len)) |
| return -EINVAL; |
| |
| if (eb->addr) |
| return memcmp(ptrv, eb->addr + start, len); |
| |
| offset = get_eb_offset_in_folio(eb, start); |
| |
| while (len > 0) { |
| cur = min(len, unit_size - offset); |
| kaddr = folio_address(eb->folios[i]); |
| ret = memcmp(ptr, kaddr + offset, cur); |
| if (ret) |
| break; |
| |
| ptr += cur; |
| len -= cur; |
| offset = 0; |
| i++; |
| } |
| return ret; |
| } |
| |
| /* |
| * Check that the extent buffer is uptodate. |
| * |
| * For regular sector size == PAGE_SIZE case, check if @page is uptodate. |
| * For subpage case, check if the range covered by the eb has EXTENT_UPTODATE. |
| */ |
| static void assert_eb_folio_uptodate(const struct extent_buffer *eb, int i) |
| { |
| struct btrfs_fs_info *fs_info = eb->fs_info; |
| struct folio *folio = eb->folios[i]; |
| |
| ASSERT(folio); |
| |
| /* |
| * If we are using the commit root we could potentially clear a page |
| * Uptodate while we're using the extent buffer that we've previously |
| * looked up. We don't want to complain in this case, as the page was |
| * valid before, we just didn't write it out. Instead we want to catch |
| * the case where we didn't actually read the block properly, which |
| * would have !PageUptodate and !EXTENT_BUFFER_WRITE_ERR. |
| */ |
| if (test_bit(EXTENT_BUFFER_WRITE_ERR, &eb->bflags)) |
| return; |
| |
| if (fs_info->nodesize < PAGE_SIZE) { |
| struct folio *folio = eb->folios[0]; |
| |
| ASSERT(i == 0); |
| if (WARN_ON(!btrfs_subpage_test_uptodate(fs_info, folio, |
| eb->start, eb->len))) |
| btrfs_subpage_dump_bitmap(fs_info, folio, eb->start, eb->len); |
| } else { |
| WARN_ON(!folio_test_uptodate(folio)); |
| } |
| } |
| |
| static void __write_extent_buffer(const struct extent_buffer *eb, |
| const void *srcv, unsigned long start, |
| unsigned long len, bool use_memmove) |
| { |
| const int unit_size = eb->folio_size; |
| size_t cur; |
| size_t offset; |
| char *kaddr; |
| char *src = (char *)srcv; |
| unsigned long i = get_eb_folio_index(eb, start); |
| /* For unmapped (dummy) ebs, no need to check their uptodate status. */ |
| const bool check_uptodate = !test_bit(EXTENT_BUFFER_UNMAPPED, &eb->bflags); |
| |
| if (check_eb_range(eb, start, len)) |
| return; |
| |
| if (eb->addr) { |
| if (use_memmove) |
| memmove(eb->addr + start, srcv, len); |
| else |
| memcpy(eb->addr + start, srcv, len); |
| return; |
| } |
| |
| offset = get_eb_offset_in_folio(eb, start); |
| |
| while (len > 0) { |
| if (check_uptodate) |
| assert_eb_folio_uptodate(eb, i); |
| |
| cur = min(len, unit_size - offset); |
| kaddr = folio_address(eb->folios[i]); |
| if (use_memmove) |
| memmove(kaddr + offset, src, cur); |
| else |
| memcpy(kaddr + offset, src, cur); |
| |
| src += cur; |
| len -= cur; |
| offset = 0; |
| i++; |
| } |
| } |
| |
| void write_extent_buffer(const struct extent_buffer *eb, const void *srcv, |
| unsigned long start, unsigned long len) |
| { |
| return __write_extent_buffer(eb, srcv, start, len, false); |
| } |
| |
| static void memset_extent_buffer(const struct extent_buffer *eb, int c, |
| unsigned long start, unsigned long len) |
| { |
| const int unit_size = eb->folio_size; |
| unsigned long cur = start; |
| |
| if (eb->addr) { |
| memset(eb->addr + start, c, len); |
| return; |
| } |
| |
| while (cur < start + len) { |
| unsigned long index = get_eb_folio_index(eb, cur); |
| unsigned int offset = get_eb_offset_in_folio(eb, cur); |
| unsigned int cur_len = min(start + len - cur, unit_size - offset); |
| |
| assert_eb_folio_uptodate(eb, index); |
| memset(folio_address(eb->folios[index]) + offset, c, cur_len); |
| |
| cur += cur_len; |
| } |
| } |
| |
| void memzero_extent_buffer(const struct extent_buffer *eb, unsigned long start, |
| unsigned long len) |
| { |
| if (check_eb_range(eb, start, len)) |
| return; |
| return memset_extent_buffer(eb, 0, start, len); |
| } |
| |
| void copy_extent_buffer_full(const struct extent_buffer *dst, |
| const struct extent_buffer *src) |
| { |
| const int unit_size = src->folio_size; |
| unsigned long cur = 0; |
| |
| ASSERT(dst->len == src->len); |
| |
| while (cur < src->len) { |
| unsigned long index = get_eb_folio_index(src, cur); |
| unsigned long offset = get_eb_offset_in_folio(src, cur); |
| unsigned long cur_len = min(src->len, unit_size - offset); |
| void *addr = folio_address(src->folios[index]) + offset; |
| |
| write_extent_buffer(dst, addr, cur, cur_len); |
| |
| cur += cur_len; |
| } |
| } |
| |
| void copy_extent_buffer(const struct extent_buffer *dst, |
| const struct extent_buffer *src, |
| unsigned long dst_offset, unsigned long src_offset, |
| unsigned long len) |
| { |
| const int unit_size = dst->folio_size; |
| u64 dst_len = dst->len; |
| size_t cur; |
| size_t offset; |
| char *kaddr; |
| unsigned long i = get_eb_folio_index(dst, dst_offset); |
| |
| if (check_eb_range(dst, dst_offset, len) || |
| check_eb_range(src, src_offset, len)) |
| return; |
| |
| WARN_ON(src->len != dst_len); |
| |
| offset = get_eb_offset_in_folio(dst, dst_offset); |
| |
| while (len > 0) { |
| assert_eb_folio_uptodate(dst, i); |
| |
| cur = min(len, (unsigned long)(unit_size - offset)); |
| |
| kaddr = folio_address(dst->folios[i]); |
| read_extent_buffer(src, kaddr + offset, src_offset, cur); |
| |
| src_offset += cur; |
| len -= cur; |
| offset = 0; |
| i++; |
| } |
| } |
| |
| /* |
| * Calculate the folio and offset of the byte containing the given bit number. |
| * |
| * @eb: the extent buffer |
| * @start: offset of the bitmap item in the extent buffer |
| * @nr: bit number |
| * @folio_index: return index of the folio in the extent buffer that contains |
| * the given bit number |
| * @folio_offset: return offset into the folio given by folio_index |
| * |
| * This helper hides the ugliness of finding the byte in an extent buffer which |
| * contains a given bit. |
| */ |
| static inline void eb_bitmap_offset(const struct extent_buffer *eb, |
| unsigned long start, unsigned long nr, |
| unsigned long *folio_index, |
| size_t *folio_offset) |
| { |
| size_t byte_offset = BIT_BYTE(nr); |
| size_t offset; |
| |
| /* |
| * The byte we want is the offset of the extent buffer + the offset of |
| * the bitmap item in the extent buffer + the offset of the byte in the |
| * bitmap item. |
| */ |
| offset = start + offset_in_eb_folio(eb, eb->start) + byte_offset; |
| |
| *folio_index = offset >> eb->folio_shift; |
| *folio_offset = offset_in_eb_folio(eb, offset); |
| } |
| |
| /* |
| * Determine whether a bit in a bitmap item is set. |
| * |
| * @eb: the extent buffer |
| * @start: offset of the bitmap item in the extent buffer |
| * @nr: bit number to test |
| */ |
| int extent_buffer_test_bit(const struct extent_buffer *eb, unsigned long start, |
| unsigned long nr) |
| { |
| unsigned long i; |
| size_t offset; |
| u8 *kaddr; |
| |
| eb_bitmap_offset(eb, start, nr, &i, &offset); |
| assert_eb_folio_uptodate(eb, i); |
| kaddr = folio_address(eb->folios[i]); |
| return 1U & (kaddr[offset] >> (nr & (BITS_PER_BYTE - 1))); |
| } |
| |
| static u8 *extent_buffer_get_byte(const struct extent_buffer *eb, unsigned long bytenr) |
| { |
| unsigned long index = get_eb_folio_index(eb, bytenr); |
| |
| if (check_eb_range(eb, bytenr, 1)) |
| return NULL; |
| return folio_address(eb->folios[index]) + get_eb_offset_in_folio(eb, bytenr); |
| } |
| |
| /* |
| * Set an area of a bitmap to 1. |
| * |
| * @eb: the extent buffer |
| * @start: offset of the bitmap item in the extent buffer |
| * @pos: bit number of the first bit |
| * @len: number of bits to set |
| */ |
| void extent_buffer_bitmap_set(const struct extent_buffer *eb, unsigned long start, |
| unsigned long pos, unsigned long len) |
| { |
| unsigned int first_byte = start + BIT_BYTE(pos); |
| unsigned int last_byte = start + BIT_BYTE(pos + len - 1); |
| const bool same_byte = (first_byte == last_byte); |
| u8 mask = BITMAP_FIRST_BYTE_MASK(pos); |
| u8 *kaddr; |
| |
| if (same_byte) |
| mask &= BITMAP_LAST_BYTE_MASK(pos + len); |
| |
| /* Handle the first byte. */ |
| kaddr = extent_buffer_get_byte(eb, first_byte); |
| *kaddr |= mask; |
| if (same_byte) |
| return; |
| |
| /* Handle the byte aligned part. */ |
| ASSERT(first_byte + 1 <= last_byte); |
| memset_extent_buffer(eb, 0xff, first_byte + 1, last_byte - first_byte - 1); |
| |
| /* Handle the last byte. */ |
| kaddr = extent_buffer_get_byte(eb, last_byte); |
| *kaddr |= BITMAP_LAST_BYTE_MASK(pos + len); |
| } |
| |
| |
| /* |
| * Clear an area of a bitmap. |
| * |
| * @eb: the extent buffer |
| * @start: offset of the bitmap item in the extent buffer |
| * @pos: bit number of the first bit |
| * @len: number of bits to clear |
| */ |
| void extent_buffer_bitmap_clear(const struct extent_buffer *eb, |
| unsigned long start, unsigned long pos, |
| unsigned long len) |
| { |
| unsigned int first_byte = start + BIT_BYTE(pos); |
| unsigned int last_byte = start + BIT_BYTE(pos + len - 1); |
| const bool same_byte = (first_byte == last_byte); |
| u8 mask = BITMAP_FIRST_BYTE_MASK(pos); |
| u8 *kaddr; |
| |
| if (same_byte) |
| mask &= BITMAP_LAST_BYTE_MASK(pos + len); |
| |
| /* Handle the first byte. */ |
| kaddr = extent_buffer_get_byte(eb, first_byte); |
| *kaddr &= ~mask; |
| if (same_byte) |
| return; |
| |
| /* Handle the byte aligned part. */ |
| ASSERT(first_byte + 1 <= last_byte); |
| memset_extent_buffer(eb, 0, first_byte + 1, last_byte - first_byte - 1); |
| |
| /* Handle the last byte. */ |
| kaddr = extent_buffer_get_byte(eb, last_byte); |
| *kaddr &= ~BITMAP_LAST_BYTE_MASK(pos + len); |
| } |
| |
| static inline bool areas_overlap(unsigned long src, unsigned long dst, unsigned long len) |
| { |
| unsigned long distance = (src > dst) ? src - dst : dst - src; |
| return distance < len; |
| } |
| |
| void memcpy_extent_buffer(const struct extent_buffer *dst, |
| unsigned long dst_offset, unsigned long src_offset, |
| unsigned long len) |
| { |
| const int unit_size = dst->folio_size; |
| unsigned long cur_off = 0; |
| |
| if (check_eb_range(dst, dst_offset, len) || |
| check_eb_range(dst, src_offset, len)) |
| return; |
| |
| if (dst->addr) { |
| const bool use_memmove = areas_overlap(src_offset, dst_offset, len); |
| |
| if (use_memmove) |
| memmove(dst->addr + dst_offset, dst->addr + src_offset, len); |
| else |
| memcpy(dst->addr + dst_offset, dst->addr + src_offset, len); |
| return; |
| } |
| |
| while (cur_off < len) { |
| unsigned long cur_src = cur_off + src_offset; |
| unsigned long folio_index = get_eb_folio_index(dst, cur_src); |
| unsigned long folio_off = get_eb_offset_in_folio(dst, cur_src); |
| unsigned long cur_len = min(src_offset + len - cur_src, |
| unit_size - folio_off); |
| void *src_addr = folio_address(dst->folios[folio_index]) + folio_off; |
| const bool use_memmove = areas_overlap(src_offset + cur_off, |
| dst_offset + cur_off, cur_len); |
| |
| __write_extent_buffer(dst, src_addr, dst_offset + cur_off, cur_len, |
| use_memmove); |
| cur_off += cur_len; |
| } |
| } |
| |
| void memmove_extent_buffer(const struct extent_buffer *dst, |
| unsigned long dst_offset, unsigned long src_offset, |
| unsigned long len) |
| { |
| unsigned long dst_end = dst_offset + len - 1; |
| unsigned long src_end = src_offset + len - 1; |
| |
| if (check_eb_range(dst, dst_offset, len) || |
| check_eb_range(dst, src_offset, len)) |
| return; |
| |
| if (dst_offset < src_offset) { |
| memcpy_extent_buffer(dst, dst_offset, src_offset, len); |
| return; |
| } |
| |
| if (dst->addr) { |
| memmove(dst->addr + dst_offset, dst->addr + src_offset, len); |
| return; |
| } |
| |
| while (len > 0) { |
| unsigned long src_i; |
| size_t cur; |
| size_t dst_off_in_folio; |
| size_t src_off_in_folio; |
| void *src_addr; |
| bool use_memmove; |
| |
| src_i = get_eb_folio_index(dst, src_end); |
| |
| dst_off_in_folio = get_eb_offset_in_folio(dst, dst_end); |
| src_off_in_folio = get_eb_offset_in_folio(dst, src_end); |
| |
| cur = min_t(unsigned long, len, src_off_in_folio + 1); |
| cur = min(cur, dst_off_in_folio + 1); |
| |
| src_addr = folio_address(dst->folios[src_i]) + src_off_in_folio - |
| cur + 1; |
| use_memmove = areas_overlap(src_end - cur + 1, dst_end - cur + 1, |
| cur); |
| |
| __write_extent_buffer(dst, src_addr, dst_end - cur + 1, cur, |
| use_memmove); |
| |
| dst_end -= cur; |
| src_end -= cur; |
| len -= cur; |
| } |
| } |
| |
| #define GANG_LOOKUP_SIZE 16 |
| static struct extent_buffer *get_next_extent_buffer( |
| struct btrfs_fs_info *fs_info, struct page *page, u64 bytenr) |
| { |
| struct extent_buffer *gang[GANG_LOOKUP_SIZE]; |
| struct extent_buffer *found = NULL; |
| u64 page_start = page_offset(page); |
| u64 cur = page_start; |
| |
| ASSERT(in_range(bytenr, page_start, PAGE_SIZE)); |
| lockdep_assert_held(&fs_info->buffer_lock); |
| |
| while (cur < page_start + PAGE_SIZE) { |
| int ret; |
| int i; |
| |
| ret = radix_tree_gang_lookup(&fs_info->buffer_radix, |
| (void **)gang, cur >> fs_info->sectorsize_bits, |
| min_t(unsigned int, GANG_LOOKUP_SIZE, |
| PAGE_SIZE / fs_info->nodesize)); |
| if (ret == 0) |
| goto out; |
| for (i = 0; i < ret; i++) { |
| /* Already beyond page end */ |
| if (gang[i]->start >= page_start + PAGE_SIZE) |
| goto out; |
| /* Found one */ |
| if (gang[i]->start >= bytenr) { |
| found = gang[i]; |
| goto out; |
| } |
| } |
| cur = gang[ret - 1]->start + gang[ret - 1]->len; |
| } |
| out: |
| return found; |
| } |
| |
| static int try_release_subpage_extent_buffer(struct page *page) |
| { |
| struct btrfs_fs_info *fs_info = page_to_fs_info(page); |
| u64 cur = page_offset(page); |
| const u64 end = page_offset(page) + PAGE_SIZE; |
| int ret; |
| |
| while (cur < end) { |
| struct extent_buffer *eb = NULL; |
| |
| /* |
| * Unlike try_release_extent_buffer() which uses folio private |
| * to grab buffer, for subpage case we rely on radix tree, thus |
| * we need to ensure radix tree consistency. |
| * |
| * We also want an atomic snapshot of the radix tree, thus go |
| * with spinlock rather than RCU. |
| */ |
| spin_lock(&fs_info->buffer_lock); |
| eb = get_next_extent_buffer(fs_info, page, cur); |
| if (!eb) { |
| /* No more eb in the page range after or at cur */ |
| spin_unlock(&fs_info->buffer_lock); |
| break; |
| } |
| cur = eb->start + eb->len; |
| |
| /* |
| * The same as try_release_extent_buffer(), to ensure the eb |
| * won't disappear out from under us. |
| */ |
| spin_lock(&eb->refs_lock); |
| if (atomic_read(&eb->refs) != 1 || extent_buffer_under_io(eb)) { |
| spin_unlock(&eb->refs_lock); |
| spin_unlock(&fs_info->buffer_lock); |
| break; |
| } |
| spin_unlock(&fs_info->buffer_lock); |
| |
| /* |
| * If tree ref isn't set then we know the ref on this eb is a |
| * real ref, so just return, this eb will likely be freed soon |
| * anyway. |
| */ |
| if (!test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) { |
| spin_unlock(&eb->refs_lock); |
| break; |
| } |
| |
| /* |
| * Here we don't care about the return value, we will always |
| * check the folio private at the end. And |
| * release_extent_buffer() will release the refs_lock. |
| */ |
| release_extent_buffer(eb); |
| } |
| /* |
| * Finally to check if we have cleared folio private, as if we have |
| * released all ebs in the page, the folio private should be cleared now. |
| */ |
| spin_lock(&page->mapping->i_private_lock); |
| if (!folio_test_private(page_folio(page))) |
| ret = 1; |
| else |
| ret = 0; |
| spin_unlock(&page->mapping->i_private_lock); |
| return ret; |
| |
| } |
| |
| int try_release_extent_buffer(struct page *page) |
| { |
| struct folio *folio = page_folio(page); |
| struct extent_buffer *eb; |
| |
| if (page_to_fs_info(page)->nodesize < PAGE_SIZE) |
| return try_release_subpage_extent_buffer(page); |
| |
| /* |
| * We need to make sure nobody is changing folio private, as we rely on |
| * folio private as the pointer to extent buffer. |
| */ |
| spin_lock(&page->mapping->i_private_lock); |
| if (!folio_test_private(folio)) { |
| spin_unlock(&page->mapping->i_private_lock); |
| return 1; |
| } |
| |
| eb = folio_get_private(folio); |
| BUG_ON(!eb); |
| |
| /* |
| * This is a little awful but should be ok, we need to make sure that |
| * the eb doesn't disappear out from under us while we're looking at |
| * this page. |
| */ |
| spin_lock(&eb->refs_lock); |
| if (atomic_read(&eb->refs) != 1 || extent_buffer_under_io(eb)) { |
| spin_unlock(&eb->refs_lock); |
| spin_unlock(&page->mapping->i_private_lock); |
| return 0; |
| } |
| spin_unlock(&page->mapping->i_private_lock); |
| |
| /* |
| * If tree ref isn't set then we know the ref on this eb is a real ref, |
| * so just return, this page will likely be freed soon anyway. |
| */ |
| if (!test_and_clear_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) { |
| spin_unlock(&eb->refs_lock); |
| return 0; |
| } |
| |
| return release_extent_buffer(eb); |
| } |
| |
| /* |
| * Attempt to readahead a child block. |
| * |
| * @fs_info: the fs_info |
| * @bytenr: bytenr to read |
| * @owner_root: objectid of the root that owns this eb |
| * @gen: generation for the uptodate check, can be 0 |
| * @level: level for the eb |
| * |
| * Attempt to readahead a tree block at @bytenr. If @gen is 0 then we do a |
| * normal uptodate check of the eb, without checking the generation. If we have |
| * to read the block we will not block on anything. |
| */ |
| void btrfs_readahead_tree_block(struct btrfs_fs_info *fs_info, |
| u64 bytenr, u64 owner_root, u64 gen, int level) |
| { |
| struct btrfs_tree_parent_check check = { |
| .has_first_key = 0, |
| .level = level, |
| .transid = gen |
| }; |
| struct extent_buffer *eb; |
| int ret; |
| |
| eb = btrfs_find_create_tree_block(fs_info, bytenr, owner_root, level); |
| if (IS_ERR(eb)) |
| return; |
| |
| if (btrfs_buffer_uptodate(eb, gen, 1)) { |
| free_extent_buffer(eb); |
| return; |
| } |
| |
| ret = read_extent_buffer_pages(eb, WAIT_NONE, 0, &check); |
| if (ret < 0) |
| free_extent_buffer_stale(eb); |
| else |
| free_extent_buffer(eb); |
| } |
| |
| /* |
| * Readahead a node's child block. |
| * |
| * @node: parent node we're reading from |
| * @slot: slot in the parent node for the child we want to read |
| * |
| * A helper for btrfs_readahead_tree_block, we simply read the bytenr pointed at |
| * the slot in the node provided. |
| */ |
| void btrfs_readahead_node_child(struct extent_buffer *node, int slot) |
| { |
| btrfs_readahead_tree_block(node->fs_info, |
| btrfs_node_blockptr(node, slot), |
| btrfs_header_owner(node), |
| btrfs_node_ptr_generation(node, slot), |
| btrfs_header_level(node) - 1); |
| } |