| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung S5K6A3(YX) raw image sensor |
| |
| maintainers: |
| - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
| |
| description: |
| S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data |
| interfaces and CCI (I2C compatible) control bus. |
| |
| properties: |
| compatible: |
| const: samsung,s5k6a3 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: extclk |
| |
| clock-frequency: |
| default: 24000000 |
| description: extclk clock frequency |
| |
| gpios: |
| maxItems: 1 |
| description: GPIO connected to the RESET pin |
| |
| afvdd-supply: |
| description: AF (actuator) voltage supply |
| |
| svdda-supply: |
| description: Core voltage supply |
| |
| svddio-supply: |
| description: I/O voltage supply |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| additionalProperties: false |
| |
| properties: |
| endpoint: |
| $ref: /schemas/media/video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| items: |
| - const: 1 |
| |
| required: |
| - compatible |
| - clocks |
| - clock-names |
| - gpios |
| - afvdd-supply |
| - svdda-supply |
| - svddio-supply |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sensor@10 { |
| compatible = "samsung,s5k6a3"; |
| reg = <0x10>; |
| clock-frequency = <24000000>; |
| clocks = <&camera 1>; |
| clock-names = "extclk"; |
| gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; |
| afvdd-supply = <&ldo19_reg>; |
| svdda-supply = <&cam_io_reg>; |
| svddio-supply = <&ldo19_reg>; |
| |
| port { |
| endpoint { |
| remote-endpoint = <&csis1_ep>; |
| data-lanes = <1>; |
| }; |
| }; |
| }; |
| }; |
