blob: 9a00dab2e8a3f008857a9dcc493f103e497fbe7e [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sony IMX415 CMOS Image Sensor
maintainers:
- Michael Riesch <michael.riesch@wolfvision.net>
description: |-
The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
solid-state image sensor with a square pixel array and 8.46 M effective
pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
1.8 V triple power supply, and has low power consumption.
The IMX415 is programmable through I2C interface. The sensor output is
available via CSI-2 serial data output (two or four lanes).
allOf:
- $ref: ../video-interface-devices.yaml#
properties:
compatible:
const: sony,imx415
reg:
maxItems: 1
clocks:
description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
maxItems: 1
avdd-supply:
description: Analog power supply (2.9 V)
dvdd-supply:
description: Digital power supply (1.1 V)
ovdd-supply:
description: Interface power supply (1.8 V)
reset-gpios:
description: Sensor reset (XCLR) GPIO
maxItems: 1
port:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
oneOf:
- items:
- const: 1
- const: 2
- items:
- const: 1
- const: 2
- const: 3
- const: 4
required:
- data-lanes
- link-frequencies
required:
- endpoint
required:
- compatible
- reg
- clocks
- avdd-supply
- dvdd-supply
- ovdd-supply
- port
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
imx415: camera-sensor@1a {
compatible = "sony,imx415";
reg = <0x1a>;
avdd-supply = <&vcc2v9_cam>;
clocks = <&clock_cam>;
dvdd-supply = <&vcc1v1_cam>;
lens-focus = <&vcm>;
orientation = <2>;
ovdd-supply = <&vcc1v8_cam>;
reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
rotation = <180>;
port {
imx415_ep: endpoint {
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <445500000>;
remote-endpoint = <&mipi_in>;
};
};
};
};
...