| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm_kms.h" |
| #include "dsi.h" |
| |
| struct msm_dsi_manager { |
| struct msm_dsi *dsi[DSI_MAX]; |
| |
| bool is_dual_panel; |
| bool is_sync_needed; |
| int master_panel_id; |
| }; |
| |
| static struct msm_dsi_manager msm_dsim_glb; |
| |
| #define IS_DUAL_PANEL() (msm_dsim_glb.is_dual_panel) |
| #define IS_SYNC_NEEDED() (msm_dsim_glb.is_sync_needed) |
| #define IS_MASTER_PANEL(id) (msm_dsim_glb.master_panel_id == id) |
| |
| static inline struct msm_dsi *dsi_mgr_get_dsi(int id) |
| { |
| return msm_dsim_glb.dsi[id]; |
| } |
| |
| static inline struct msm_dsi *dsi_mgr_get_other_dsi(int id) |
| { |
| return msm_dsim_glb.dsi[(id + 1) % DSI_MAX]; |
| } |
| |
| static int dsi_mgr_parse_dual_panel(struct device_node *np, int id) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| |
| /* We assume 2 dsi nodes have the same information of dual-panel and |
| * sync-mode, and only one node specifies master in case of dual mode. |
| */ |
| if (!msm_dsim->is_dual_panel) |
| msm_dsim->is_dual_panel = of_property_read_bool( |
| np, "qcom,dual-panel-mode"); |
| |
| if (msm_dsim->is_dual_panel) { |
| if (of_property_read_bool(np, "qcom,master-panel")) |
| msm_dsim->master_panel_id = id; |
| if (!msm_dsim->is_sync_needed) |
| msm_dsim->is_sync_needed = of_property_read_bool( |
| np, "qcom,sync-dual-panel"); |
| } |
| |
| return 0; |
| } |
| |
| struct dsi_connector { |
| struct drm_connector base; |
| int id; |
| }; |
| |
| struct dsi_bridge { |
| struct drm_bridge base; |
| int id; |
| }; |
| |
| #define to_dsi_connector(x) container_of(x, struct dsi_connector, base) |
| #define to_dsi_bridge(x) container_of(x, struct dsi_bridge, base) |
| |
| static inline int dsi_mgr_connector_get_id(struct drm_connector *connector) |
| { |
| struct dsi_connector *dsi_connector = to_dsi_connector(connector); |
| return dsi_connector->id; |
| } |
| |
| static int dsi_mgr_bridge_get_id(struct drm_bridge *bridge) |
| { |
| struct dsi_bridge *dsi_bridge = to_dsi_bridge(bridge); |
| return dsi_bridge->id; |
| } |
| |
| static enum drm_connector_status dsi_mgr_connector_detect( |
| struct drm_connector *connector, bool force) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| struct msm_drm_private *priv = connector->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| |
| DBG("id=%d", id); |
| if (!msm_dsi->panel) { |
| msm_dsi->panel = msm_dsi_host_get_panel(msm_dsi->host, |
| &msm_dsi->panel_flags); |
| |
| /* There is only 1 panel in the global panel list |
| * for dual panel mode. Therefore slave dsi should get |
| * the drm_panel instance from master dsi, and |
| * keep using the panel flags got from the current DSI link. |
| */ |
| if (!msm_dsi->panel && IS_DUAL_PANEL() && |
| !IS_MASTER_PANEL(id) && other_dsi) |
| msm_dsi->panel = msm_dsi_host_get_panel( |
| other_dsi->host, NULL); |
| |
| if (msm_dsi->panel && IS_DUAL_PANEL()) |
| drm_object_attach_property(&connector->base, |
| connector->dev->mode_config.tile_property, 0); |
| |
| /* Set split display info to kms once dual panel is connected |
| * to both hosts |
| */ |
| if (msm_dsi->panel && IS_DUAL_PANEL() && |
| other_dsi && other_dsi->panel) { |
| bool cmd_mode = !(msm_dsi->panel_flags & |
| MIPI_DSI_MODE_VIDEO); |
| struct drm_encoder *encoder = msm_dsi_get_encoder( |
| dsi_mgr_get_dsi(DSI_ENCODER_MASTER)); |
| struct drm_encoder *slave_enc = msm_dsi_get_encoder( |
| dsi_mgr_get_dsi(DSI_ENCODER_SLAVE)); |
| |
| if (kms->funcs->set_split_display) |
| kms->funcs->set_split_display(kms, encoder, |
| slave_enc, cmd_mode); |
| else |
| pr_err("mdp does not support dual panel\n"); |
| } |
| } |
| |
| return msm_dsi->panel ? connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| static void dsi_mgr_connector_destroy(struct drm_connector *connector) |
| { |
| DBG(""); |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| } |
| |
| static void dsi_dual_connector_fix_modes(struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode, *m; |
| |
| /* Only support left-right mode */ |
| list_for_each_entry_safe(mode, m, &connector->probed_modes, head) { |
| mode->clock >>= 1; |
| mode->hdisplay >>= 1; |
| mode->hsync_start >>= 1; |
| mode->hsync_end >>= 1; |
| mode->htotal >>= 1; |
| drm_mode_set_name(mode); |
| } |
| } |
| |
| static int dsi_dual_connector_tile_init( |
| struct drm_connector *connector, int id) |
| { |
| struct drm_display_mode *mode; |
| /* Fake topology id */ |
| char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'}; |
| |
| if (connector->tile_group) { |
| DBG("Tile property has been initialized"); |
| return 0; |
| } |
| |
| /* Use the first mode only for now */ |
| mode = list_first_entry(&connector->probed_modes, |
| struct drm_display_mode, |
| head); |
| if (!mode) |
| return -EINVAL; |
| |
| connector->tile_group = drm_mode_get_tile_group( |
| connector->dev, topo_id); |
| if (!connector->tile_group) |
| connector->tile_group = drm_mode_create_tile_group( |
| connector->dev, topo_id); |
| if (!connector->tile_group) { |
| pr_err("%s: failed to create tile group\n", __func__); |
| return -ENOMEM; |
| } |
| |
| connector->has_tile = true; |
| connector->tile_is_single_monitor = true; |
| |
| /* mode has been fixed */ |
| connector->tile_h_size = mode->hdisplay; |
| connector->tile_v_size = mode->vdisplay; |
| |
| /* Only support left-right mode */ |
| connector->num_h_tile = 2; |
| connector->num_v_tile = 1; |
| |
| connector->tile_v_loc = 0; |
| connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0; |
| |
| return 0; |
| } |
| |
| static int dsi_mgr_connector_get_modes(struct drm_connector *connector) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_panel *panel = msm_dsi->panel; |
| int ret, num; |
| |
| if (!panel) |
| return 0; |
| |
| /* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode, |
| * panel should not attach to any connector. |
| * Only temporarily attach panel to the current connector here, |
| * to let panel set mode to this connector. |
| */ |
| drm_panel_attach(panel, connector); |
| num = drm_panel_get_modes(panel); |
| drm_panel_detach(panel); |
| if (!num) |
| return 0; |
| |
| if (IS_DUAL_PANEL()) { |
| /* report half resolution to user */ |
| dsi_dual_connector_fix_modes(connector); |
| ret = dsi_dual_connector_tile_init(connector, id); |
| if (ret) |
| return ret; |
| ret = drm_mode_connector_set_tile_property(connector); |
| if (ret) { |
| pr_err("%s: set tile property failed, %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| |
| return num; |
| } |
| |
| static int dsi_mgr_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_encoder *encoder = msm_dsi_get_encoder(msm_dsi); |
| struct msm_drm_private *priv = connector->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| long actual, requested; |
| |
| DBG(""); |
| requested = 1000 * mode->clock; |
| actual = kms->funcs->round_pixclk(kms, requested, encoder); |
| |
| DBG("requested=%ld, actual=%ld", requested, actual); |
| if (actual != requested) |
| return MODE_CLOCK_RANGE; |
| |
| return MODE_OK; |
| } |
| |
| static struct drm_encoder * |
| dsi_mgr_connector_best_encoder(struct drm_connector *connector) |
| { |
| int id = dsi_mgr_connector_get_id(connector); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| |
| DBG(""); |
| return msm_dsi_get_encoder(msm_dsi); |
| } |
| |
| static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| struct drm_panel *panel = msm_dsi->panel; |
| bool is_dual_panel = IS_DUAL_PANEL(); |
| int ret; |
| |
| DBG("id=%d", id); |
| if (!panel || (is_dual_panel && (DSI_1 == id))) |
| return; |
| |
| ret = msm_dsi_host_power_on(host); |
| if (ret) { |
| pr_err("%s: power on host %d failed, %d\n", __func__, id, ret); |
| goto host_on_fail; |
| } |
| |
| if (is_dual_panel && msm_dsi1) { |
| ret = msm_dsi_host_power_on(msm_dsi1->host); |
| if (ret) { |
| pr_err("%s: power on host1 failed, %d\n", |
| __func__, ret); |
| goto host1_on_fail; |
| } |
| } |
| |
| /* Always call panel functions once, because even for dual panels, |
| * there is only one drm_panel instance. |
| */ |
| ret = drm_panel_prepare(panel); |
| if (ret) { |
| pr_err("%s: prepare panel %d failed, %d\n", __func__, id, ret); |
| goto panel_prep_fail; |
| } |
| |
| ret = msm_dsi_host_enable(host); |
| if (ret) { |
| pr_err("%s: enable host %d failed, %d\n", __func__, id, ret); |
| goto host_en_fail; |
| } |
| |
| if (is_dual_panel && msm_dsi1) { |
| ret = msm_dsi_host_enable(msm_dsi1->host); |
| if (ret) { |
| pr_err("%s: enable host1 failed, %d\n", __func__, ret); |
| goto host1_en_fail; |
| } |
| } |
| |
| ret = drm_panel_enable(panel); |
| if (ret) { |
| pr_err("%s: enable panel %d failed, %d\n", __func__, id, ret); |
| goto panel_en_fail; |
| } |
| |
| return; |
| |
| panel_en_fail: |
| if (is_dual_panel && msm_dsi1) |
| msm_dsi_host_disable(msm_dsi1->host); |
| host1_en_fail: |
| msm_dsi_host_disable(host); |
| host_en_fail: |
| drm_panel_unprepare(panel); |
| panel_prep_fail: |
| if (is_dual_panel && msm_dsi1) |
| msm_dsi_host_power_off(msm_dsi1->host); |
| host1_on_fail: |
| msm_dsi_host_power_off(host); |
| host_on_fail: |
| return; |
| } |
| |
| static void dsi_mgr_bridge_enable(struct drm_bridge *bridge) |
| { |
| DBG(""); |
| } |
| |
| static void dsi_mgr_bridge_disable(struct drm_bridge *bridge) |
| { |
| DBG(""); |
| } |
| |
| static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| struct drm_panel *panel = msm_dsi->panel; |
| bool is_dual_panel = IS_DUAL_PANEL(); |
| int ret; |
| |
| DBG("id=%d", id); |
| |
| if (!panel || (is_dual_panel && (DSI_1 == id))) |
| return; |
| |
| ret = drm_panel_disable(panel); |
| if (ret) |
| pr_err("%s: Panel %d OFF failed, %d\n", __func__, id, ret); |
| |
| ret = msm_dsi_host_disable(host); |
| if (ret) |
| pr_err("%s: host %d disable failed, %d\n", __func__, id, ret); |
| |
| if (is_dual_panel && msm_dsi1) { |
| ret = msm_dsi_host_disable(msm_dsi1->host); |
| if (ret) |
| pr_err("%s: host1 disable failed, %d\n", __func__, ret); |
| } |
| |
| ret = drm_panel_unprepare(panel); |
| if (ret) |
| pr_err("%s: Panel %d unprepare failed,%d\n", __func__, id, ret); |
| |
| ret = msm_dsi_host_power_off(host); |
| if (ret) |
| pr_err("%s: host %d power off failed,%d\n", __func__, id, ret); |
| |
| if (is_dual_panel && msm_dsi1) { |
| ret = msm_dsi_host_power_off(msm_dsi1->host); |
| if (ret) |
| pr_err("%s: host1 power off failed, %d\n", |
| __func__, ret); |
| } |
| } |
| |
| static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| int id = dsi_mgr_bridge_get_id(bridge); |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| bool is_dual_panel = IS_DUAL_PANEL(); |
| |
| DBG("set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", |
| mode->base.id, mode->name, |
| mode->vrefresh, mode->clock, |
| mode->hdisplay, mode->hsync_start, |
| mode->hsync_end, mode->htotal, |
| mode->vdisplay, mode->vsync_start, |
| mode->vsync_end, mode->vtotal, |
| mode->type, mode->flags); |
| |
| if (is_dual_panel && (DSI_1 == id)) |
| return; |
| |
| msm_dsi_host_set_display_mode(host, adjusted_mode); |
| if (is_dual_panel && other_dsi) |
| msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode); |
| } |
| |
| static const struct drm_connector_funcs dsi_mgr_connector_funcs = { |
| .dpms = drm_atomic_helper_connector_dpms, |
| .detect = dsi_mgr_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = dsi_mgr_connector_destroy, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_connector_helper_funcs dsi_mgr_conn_helper_funcs = { |
| .get_modes = dsi_mgr_connector_get_modes, |
| .mode_valid = dsi_mgr_connector_mode_valid, |
| .best_encoder = dsi_mgr_connector_best_encoder, |
| }; |
| |
| static const struct drm_bridge_funcs dsi_mgr_bridge_funcs = { |
| .pre_enable = dsi_mgr_bridge_pre_enable, |
| .enable = dsi_mgr_bridge_enable, |
| .disable = dsi_mgr_bridge_disable, |
| .post_disable = dsi_mgr_bridge_post_disable, |
| .mode_set = dsi_mgr_bridge_mode_set, |
| }; |
| |
| /* initialize connector */ |
| struct drm_connector *msm_dsi_manager_connector_init(u8 id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_connector *connector = NULL; |
| struct dsi_connector *dsi_connector; |
| int ret; |
| |
| dsi_connector = devm_kzalloc(msm_dsi->dev->dev, |
| sizeof(*dsi_connector), GFP_KERNEL); |
| if (!dsi_connector) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| dsi_connector->id = id; |
| |
| connector = &dsi_connector->base; |
| |
| ret = drm_connector_init(msm_dsi->dev, connector, |
| &dsi_mgr_connector_funcs, DRM_MODE_CONNECTOR_DSI); |
| if (ret) |
| goto fail; |
| |
| drm_connector_helper_add(connector, &dsi_mgr_conn_helper_funcs); |
| |
| /* Enable HPD to let hpd event is handled |
| * when panel is attached to the host. |
| */ |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| |
| /* Display driver doesn't support interlace now. */ |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| ret = drm_connector_register(connector); |
| if (ret) |
| goto fail; |
| |
| return connector; |
| |
| fail: |
| if (connector) |
| dsi_mgr_connector_destroy(connector); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /* initialize bridge */ |
| struct drm_bridge *msm_dsi_manager_bridge_init(u8 id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct drm_bridge *bridge = NULL; |
| struct dsi_bridge *dsi_bridge; |
| int ret; |
| |
| dsi_bridge = devm_kzalloc(msm_dsi->dev->dev, |
| sizeof(*dsi_bridge), GFP_KERNEL); |
| if (!dsi_bridge) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| dsi_bridge->id = id; |
| |
| bridge = &dsi_bridge->base; |
| bridge->funcs = &dsi_mgr_bridge_funcs; |
| |
| ret = drm_bridge_attach(msm_dsi->dev, bridge); |
| if (ret) |
| goto fail; |
| |
| return bridge; |
| |
| fail: |
| if (bridge) |
| msm_dsi_manager_bridge_destroy(bridge); |
| |
| return ERR_PTR(ret); |
| } |
| |
| void msm_dsi_manager_bridge_destroy(struct drm_bridge *bridge) |
| { |
| } |
| |
| int msm_dsi_manager_phy_enable(int id, |
| const unsigned long bit_rate, const unsigned long esc_rate, |
| u32 *clk_pre, u32 *clk_post) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi_phy *phy = msm_dsi->phy; |
| int ret; |
| |
| ret = msm_dsi_phy_enable(phy, IS_DUAL_PANEL(), bit_rate, esc_rate); |
| if (ret) |
| return ret; |
| |
| msm_dsi->phy_enabled = true; |
| msm_dsi_phy_get_clk_pre_post(phy, clk_pre, clk_post); |
| |
| return 0; |
| } |
| |
| void msm_dsi_manager_phy_disable(int id) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *mdsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER); |
| struct msm_dsi *sdsi = dsi_mgr_get_dsi(DSI_CLOCK_SLAVE); |
| struct msm_dsi_phy *phy = msm_dsi->phy; |
| |
| /* disable DSI phy |
| * In dual-dsi configuration, the phy should be disabled for the |
| * first controller only when the second controller is disabled. |
| */ |
| msm_dsi->phy_enabled = false; |
| if (IS_DUAL_PANEL() && mdsi && sdsi) { |
| if (!mdsi->phy_enabled && !sdsi->phy_enabled) { |
| msm_dsi_phy_disable(sdsi->phy); |
| msm_dsi_phy_disable(mdsi->phy); |
| } |
| } else { |
| msm_dsi_phy_disable(phy); |
| } |
| } |
| |
| int msm_dsi_manager_cmd_xfer(int id, const struct mipi_dsi_msg *msg) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| bool is_read = (msg->rx_buf && msg->rx_len); |
| bool need_sync = (IS_SYNC_NEEDED() && !is_read); |
| int ret; |
| |
| if (!msg->tx_buf || !msg->tx_len) |
| return 0; |
| |
| /* In dual master case, panel requires the same commands sent to |
| * both DSI links. Host issues the command trigger to both links |
| * when DSI_1 calls the cmd transfer function, no matter it happens |
| * before or after DSI_0 cmd transfer. |
| */ |
| if (need_sync && (id == DSI_0)) |
| return is_read ? msg->rx_len : msg->tx_len; |
| |
| if (need_sync && msm_dsi0) { |
| ret = msm_dsi_host_xfer_prepare(msm_dsi0->host, msg); |
| if (ret) { |
| pr_err("%s: failed to prepare non-trigger host, %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| ret = msm_dsi_host_xfer_prepare(host, msg); |
| if (ret) { |
| pr_err("%s: failed to prepare host, %d\n", __func__, ret); |
| goto restore_host0; |
| } |
| |
| ret = is_read ? msm_dsi_host_cmd_rx(host, msg) : |
| msm_dsi_host_cmd_tx(host, msg); |
| |
| msm_dsi_host_xfer_restore(host, msg); |
| |
| restore_host0: |
| if (need_sync && msm_dsi0) |
| msm_dsi_host_xfer_restore(msm_dsi0->host, msg); |
| |
| return ret; |
| } |
| |
| bool msm_dsi_manager_cmd_xfer_trigger(int id, u32 iova, u32 len) |
| { |
| struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); |
| struct msm_dsi *msm_dsi0 = dsi_mgr_get_dsi(DSI_0); |
| struct mipi_dsi_host *host = msm_dsi->host; |
| |
| if (IS_SYNC_NEEDED() && (id == DSI_0)) |
| return false; |
| |
| if (IS_SYNC_NEEDED() && msm_dsi0) |
| msm_dsi_host_cmd_xfer_commit(msm_dsi0->host, iova, len); |
| |
| msm_dsi_host_cmd_xfer_commit(host, iova, len); |
| |
| return true; |
| } |
| |
| int msm_dsi_manager_register(struct msm_dsi *msm_dsi) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| int id = msm_dsi->id; |
| struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id); |
| int ret; |
| |
| if (id > DSI_MAX) { |
| pr_err("%s: invalid id %d\n", __func__, id); |
| return -EINVAL; |
| } |
| |
| if (msm_dsim->dsi[id]) { |
| pr_err("%s: dsi%d already registered\n", __func__, id); |
| return -EBUSY; |
| } |
| |
| msm_dsim->dsi[id] = msm_dsi; |
| |
| ret = dsi_mgr_parse_dual_panel(msm_dsi->pdev->dev.of_node, id); |
| if (ret) { |
| pr_err("%s: failed to parse dual panel info\n", __func__); |
| return ret; |
| } |
| |
| if (!IS_DUAL_PANEL()) { |
| ret = msm_dsi_host_register(msm_dsi->host, true); |
| } else if (!other_dsi) { |
| return 0; |
| } else { |
| struct msm_dsi *mdsi = IS_MASTER_PANEL(id) ? |
| msm_dsi : other_dsi; |
| struct msm_dsi *sdsi = IS_MASTER_PANEL(id) ? |
| other_dsi : msm_dsi; |
| /* Register slave host first, so that slave DSI device |
| * has a chance to probe, and do not block the master |
| * DSI device's probe. |
| * Also, do not check defer for the slave host, |
| * because only master DSI device adds the panel to global |
| * panel list. The panel's device is the master DSI device. |
| */ |
| ret = msm_dsi_host_register(sdsi->host, false); |
| if (ret) |
| return ret; |
| ret = msm_dsi_host_register(mdsi->host, true); |
| } |
| |
| return ret; |
| } |
| |
| void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi) |
| { |
| struct msm_dsi_manager *msm_dsim = &msm_dsim_glb; |
| |
| if (msm_dsi->host) |
| msm_dsi_host_unregister(msm_dsi->host); |
| msm_dsim->dsi[msm_dsi->id] = NULL; |
| } |
| |