| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Magnetometer sensors |
| # |
| # When adding new entries keep the list in alphabetical order |
| |
| menu "Magnetometer sensors" |
| |
| config AK8974 |
| tristate "Asahi Kasei AK8974 3-Axis Magnetometer" |
| depends on I2C |
| depends on OF |
| select REGMAP_I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for Asahi Kasei AK8974, AMI305 or |
| AMI306 I2C-based 3-axis magnetometer chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called ak8974. |
| |
| config AK8975 |
| tristate "Asahi Kasei AK8975 3-Axis Magnetometer" |
| depends on I2C |
| depends on GPIOLIB || COMPILE_TEST |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for Asahi Kasei AK8975, AK8963, |
| AK09911 or AK09912 3-Axis Magnetometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called ak8975. |
| |
| config AK09911 |
| tristate "Asahi Kasei AK09911 3-axis Compass" |
| depends on I2C |
| depends on GPIOLIB || COMPILE_TEST |
| select AK8975 |
| help |
| Deprecated: AK09911 is now supported by AK8975 driver. |
| |
| config BMC150_MAGN |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config BMC150_MAGN_I2C |
| tristate "Bosch BMC150 I2C Magnetometer Driver" |
| depends on I2C |
| select BMC150_MAGN |
| select REGMAP_I2C |
| help |
| Say yes here to build support for the BMC150 magnetometer with |
| I2C interface. |
| |
| This is a combo module with both accelerometer and magnetometer. |
| This driver is only implementing magnetometer part, which has |
| its own address and register map. |
| |
| This driver also supports I2C Bosch BMC156 and BMM150 chips. |
| To compile this driver as a module, choose M here: the module will be |
| called bmc150_magn_i2c. |
| |
| config BMC150_MAGN_SPI |
| tristate "Bosch BMC150 SPI Magnetometer Driver" |
| depends on SPI |
| select BMC150_MAGN |
| select REGMAP_SPI |
| help |
| Say yes here to build support for the BMC150 magnetometer with |
| SPI interface. |
| |
| This is a combo module with both accelerometer and magnetometer. |
| This driver is only implementing magnetometer part, which has |
| its own address and register map. |
| |
| This driver also supports SPI Bosch BMC156 and BMM150 chips. |
| To compile this driver as a module, choose M here: the module will be |
| called bmc150_magn_spi. |
| |
| config MAG3110 |
| tristate "Freescale MAG3110 3-Axis Magnetometer" |
| depends on I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say yes here to build support for the Freescale MAG3110 3-Axis |
| magnetometer. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mag3110. |
| |
| config HID_SENSOR_MAGNETOMETER_3D |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| tristate "HID Magenetometer 3D" |
| help |
| Say yes here to build support for the HID SENSOR |
| Magnetometer 3D. |
| |
| config MMC35240 |
| tristate "MEMSIC MMC35240 3-axis magnetic sensor" |
| select REGMAP_I2C |
| depends on I2C |
| help |
| Say yes here to build support for the MEMSIC MMC35240 3-axis |
| magnetic sensor. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mmc35240. |
| |
| config IIO_ST_MAGN_3AXIS |
| tristate "STMicroelectronics magnetometers 3-Axis Driver" |
| depends on (I2C || SPI_MASTER) && SYSFS |
| select IIO_ST_SENSORS_CORE |
| select IIO_ST_MAGN_I2C_3AXIS if (I2C) |
| select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER) |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) |
| help |
| Say yes here to build support for STMicroelectronics magnetometers: |
| LSM303DLHC, LSM303DLM, LIS3MDL. |
| |
| This driver can also be built as a module. If so, these modules |
| will be created: |
| - st_magn (core functions for the driver [it is mandatory]); |
| - st_magn_i2c (necessary for the I2C devices [optional*]); |
| - st_magn_spi (necessary for the SPI devices [optional*]); |
| |
| (*) one of these is necessary to do something. |
| |
| config IIO_ST_MAGN_I2C_3AXIS |
| tristate |
| depends on IIO_ST_MAGN_3AXIS |
| depends on IIO_ST_SENSORS_I2C |
| |
| config IIO_ST_MAGN_SPI_3AXIS |
| tristate |
| depends on IIO_ST_MAGN_3AXIS |
| depends on IIO_ST_SENSORS_SPI |
| |
| config SENSORS_HMC5843 |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config SENSORS_HMC5843_I2C |
| tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" |
| depends on I2C |
| select SENSORS_HMC5843 |
| select REGMAP_I2C |
| help |
| Say Y here to add support for the Honeywell HMC5843, HMC5883 and |
| HMC5883L 3-Axis Magnetometer (digital compass). |
| |
| This driver can also be compiled as a set of modules. |
| If so, these modules will be created: |
| - hmc5843_core (core functions) |
| - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) |
| |
| config SENSORS_HMC5843_SPI |
| tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" |
| depends on SPI_MASTER |
| select SENSORS_HMC5843 |
| select REGMAP_SPI |
| help |
| Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer |
| (digital compass). |
| |
| This driver can also be compiled as a set of modules. |
| If so, these modules will be created: |
| - hmc5843_core (core functions) |
| - hmc5843_spi (support for HMC5983) |
| |
| config SENSORS_RM3100 |
| tristate |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| |
| config SENSORS_RM3100_I2C |
| tristate "PNI RM3100 3-Axis Magnetometer (I2C)" |
| depends on I2C |
| select SENSORS_RM3100 |
| select REGMAP_I2C |
| help |
| Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. |
| |
| This driver can also be compiled as a module. |
| To compile this driver as a module, choose M here: the module |
| will be called rm3100-i2c. |
| |
| config SENSORS_RM3100_SPI |
| tristate "PNI RM3100 3-Axis Magnetometer (SPI)" |
| depends on SPI_MASTER |
| select SENSORS_RM3100 |
| select REGMAP_SPI |
| help |
| Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. |
| |
| This driver can also be compiled as a module. |
| To compile this driver as a module, choose M here: the module |
| will be called rm3100-spi. |
| |
| config YAMAHA_YAS530 |
| tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" |
| depends on I2C |
| select REGMAP_I2C |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| help |
| Say Y here to add support for the Yamaha YAS530 series of |
| 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are |
| fully supported. |
| |
| This driver can also be compiled as a module. |
| To compile this driver as a module, choose M here: the module |
| will be called yamaha-yas. |
| |
| endmenu |
