| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */ |
| |
| #include <linux/bits.h> |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| |
| #define OFS_FAN_INST 0 /* Is 0 because plreg base will be set at INST */ |
| #define OFS_FAN_FAIL 2 /* Is 2 bytes after base */ |
| #define OFS_SEVSTAT 0 /* Is 0 because fn2 base will be set at SEVSTAT */ |
| #define POWER_BIT 24 |
| |
| struct gxp_fan_ctrl_drvdata { |
| void __iomem *base; |
| void __iomem *plreg; |
| void __iomem *fn2; |
| }; |
| |
| static bool fan_installed(struct device *dev, int fan) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev); |
| u8 val; |
| |
| val = readb(drvdata->plreg + OFS_FAN_INST); |
| |
| return !!(val & BIT(fan)); |
| } |
| |
| static long fan_failed(struct device *dev, int fan) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev); |
| u8 val; |
| |
| val = readb(drvdata->plreg + OFS_FAN_FAIL); |
| |
| return !!(val & BIT(fan)); |
| } |
| |
| static long fan_enabled(struct device *dev, int fan) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev); |
| u32 val; |
| |
| /* |
| * Check the power status as if the platform is off the value |
| * reported for the PWM will be incorrect. Report fan as |
| * disabled. |
| */ |
| val = readl(drvdata->fn2 + OFS_SEVSTAT); |
| |
| return !!((val & BIT(POWER_BIT)) && fan_installed(dev, fan)); |
| } |
| |
| static int gxp_pwm_write(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| if (val > 255 || val < 0) |
| return -EINVAL; |
| writeb(val, drvdata->base + channel); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int gxp_fan_ctrl_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| switch (type) { |
| case hwmon_pwm: |
| return gxp_pwm_write(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int gxp_fan_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| switch (attr) { |
| case hwmon_fan_enable: |
| *val = fan_enabled(dev, channel); |
| return 0; |
| case hwmon_fan_fault: |
| *val = fan_failed(dev, channel); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int gxp_pwm_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev); |
| u32 reg; |
| |
| /* |
| * Check the power status of the platform. If the platform is off |
| * the value reported for the PWM will be incorrect. In this case |
| * report a PWM of zero. |
| */ |
| |
| reg = readl(drvdata->fn2 + OFS_SEVSTAT); |
| |
| if (reg & BIT(POWER_BIT)) |
| *val = fan_installed(dev, channel) ? readb(drvdata->base + channel) : 0; |
| else |
| *val = 0; |
| |
| return 0; |
| } |
| |
| static int gxp_fan_ctrl_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_fan: |
| return gxp_fan_read(dev, attr, channel, val); |
| case hwmon_pwm: |
| return gxp_pwm_read(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t gxp_fan_ctrl_is_visible(const void *_data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| umode_t mode = 0; |
| |
| switch (type) { |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_enable: |
| case hwmon_fan_fault: |
| mode = 0444; |
| break; |
| default: |
| break; |
| } |
| break; |
| case hwmon_pwm: |
| switch (attr) { |
| case hwmon_pwm_input: |
| mode = 0644; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return mode; |
| } |
| |
| static const struct hwmon_ops gxp_fan_ctrl_ops = { |
| .is_visible = gxp_fan_ctrl_is_visible, |
| .read = gxp_fan_ctrl_read, |
| .write = gxp_fan_ctrl_write, |
| }; |
| |
| static const struct hwmon_channel_info * const gxp_fan_ctrl_info[] = { |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE, |
| HWMON_F_FAULT | HWMON_F_ENABLE), |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info gxp_fan_ctrl_chip_info = { |
| .ops = &gxp_fan_ctrl_ops, |
| .info = gxp_fan_ctrl_info, |
| |
| }; |
| |
| static int gxp_fan_ctrl_probe(struct platform_device *pdev) |
| { |
| struct gxp_fan_ctrl_drvdata *drvdata; |
| struct device *dev = &pdev->dev; |
| struct device *hwmon_dev; |
| |
| drvdata = devm_kzalloc(dev, sizeof(struct gxp_fan_ctrl_drvdata), |
| GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| drvdata->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(drvdata->base)) |
| return dev_err_probe(dev, PTR_ERR(drvdata->base), |
| "failed to map base\n"); |
| |
| drvdata->plreg = devm_platform_ioremap_resource_byname(pdev, |
| "pl"); |
| if (IS_ERR(drvdata->plreg)) |
| return dev_err_probe(dev, PTR_ERR(drvdata->plreg), |
| "failed to map plreg\n"); |
| |
| drvdata->fn2 = devm_platform_ioremap_resource_byname(pdev, |
| "fn2"); |
| if (IS_ERR(drvdata->fn2)) |
| return dev_err_probe(dev, PTR_ERR(drvdata->fn2), |
| "failed to map fn2\n"); |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, |
| "hpe_gxp_fan_ctrl", |
| drvdata, |
| &gxp_fan_ctrl_chip_info, |
| NULL); |
| |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct of_device_id gxp_fan_ctrl_of_match[] = { |
| { .compatible = "hpe,gxp-fan-ctrl", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, gxp_fan_ctrl_of_match); |
| |
| static struct platform_driver gxp_fan_ctrl_driver = { |
| .probe = gxp_fan_ctrl_probe, |
| .driver = { |
| .name = "gxp-fan-ctrl", |
| .of_match_table = gxp_fan_ctrl_of_match, |
| }, |
| }; |
| module_platform_driver(gxp_fan_ctrl_driver); |
| |
| MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>"); |
| MODULE_DESCRIPTION("HPE GXP fan controller"); |
| MODULE_LICENSE("GPL"); |