| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "sm7225.dtsi" |
| #include "pm6350.dtsi" |
| |
| / { |
| model = "Fairphone 4"; |
| compatible = "fairphone,fp4", "qcom,sm7225"; |
| |
| /* required for bootloader to select correct board */ |
| qcom,msm-id = <434 0x10000>, <459 0x10000>; |
| qcom,board-id = <8 32>; |
| |
| aliases { |
| serial0 = &uart2; |
| }; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| stdout-path = "serial0:115200n8"; |
| |
| framebuffer0: framebuffer@a000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; |
| width = <1080>; |
| height = <2340>; |
| stride = <(1080 * 4)>; |
| format = "a8r8g8b8"; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_pin>; |
| |
| volume-up { |
| label = "volume_up"; |
| linux,code = <KEY_VOLUMEUP>; |
| gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &apps_rsc { |
| pm6350-rpmh-regulators { |
| compatible = "qcom,pm6350-rpmh-regulators"; |
| qcom,pmic-id = "a"; |
| |
| vreg_s1a: smps1 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| vreg_s2a: smps2 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <2048000>; |
| }; |
| |
| vreg_l2a: ldo2 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3a: ldo3 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4a: ldo4 { |
| regulator-min-microvolt = <352000>; |
| regulator-max-microvolt = <801000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5a: ldo5 { |
| regulator-min-microvolt = <1503000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6a: ldo6 { |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7a: ldo7 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8a: ldo8 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9a: ldo9 { |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11a: ldo11 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12a: ldo12 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l13a: ldo13 { |
| regulator-min-microvolt = <570000>; |
| regulator-max-microvolt = <650000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l14a: ldo14 { |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1900000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l15a: ldo15 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l16a: ldo16 { |
| regulator-min-microvolt = <830000>; |
| regulator-max-microvolt = <921000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l18a: ldo18 { |
| regulator-min-microvolt = <788000>; |
| regulator-max-microvolt = <1049000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l19a: ldo19 { |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l20a: ldo20 { |
| regulator-min-microvolt = <530000>; |
| regulator-max-microvolt = <801000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l21a: ldo21 { |
| regulator-min-microvolt = <751000>; |
| regulator-max-microvolt = <825000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l22a: ldo22 { |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| pm6150l-rpmh-regulators { |
| compatible = "qcom,pm6150l-rpmh-regulators"; |
| qcom,pmic-id = "e"; |
| |
| vreg_s8e: smps8 { |
| regulator-min-microvolt = <313000>; |
| regulator-max-microvolt = <1395000>; |
| }; |
| |
| vreg_l1e: ldo1 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <1980000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2e: ldo2 { |
| regulator-min-microvolt = <1170000>; |
| regulator-max-microvolt = <1305000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3e: ldo3 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1299000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4e: ldo4 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5e: ldo5 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6e: ldo6 { |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7e: ldo7 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8e: ldo8 { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9e: ldo9 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10e: ldo10 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11e: ldo11 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3401000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_bob: bob { |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <5492000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| regulator-allow-bypass; |
| }; |
| }; |
| }; |
| |
| &pm6350_gpios { |
| gpio_keys_pin: gpio-keys-pin { |
| pins = "gpio2"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| bias-pull-up; |
| input-enable; |
| power-source = <0>; |
| }; |
| }; |
| |
| &pm6350_resin { |
| status = "okay"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <13 4>, <56 2>; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3 { |
| maximum-speed = "super-speed"; |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_1_hsphy { |
| status = "okay"; |
| |
| vdd-supply = <&vreg_l18a>; |
| vdda-pll-supply = <&vreg_l2a>; |
| vdda-phy-dpdm-supply = <&vreg_l3a>; |
| }; |
| |
| &usb_1_qmpphy { |
| status = "okay"; |
| |
| vdda-phy-supply = <&vreg_l22a>; |
| vdda-pll-supply = <&vreg_l16a>; |
| }; |
