| /* |
| * arizona-micsupp.c -- Microphone supply for Arizona devices |
| * |
| * Copyright 2012 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| |
| #define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f |
| |
| struct arizona_micsupp { |
| struct regulator_dev *regulator; |
| struct arizona *arizona; |
| |
| struct regulator_consumer_supply supply; |
| struct regulator_init_data init_data; |
| }; |
| |
| static int arizona_micsupp_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector > ARIZONA_MICSUPP_MAX_SELECTOR) |
| return -EINVAL; |
| |
| if (selector == ARIZONA_MICSUPP_MAX_SELECTOR) |
| return 3300000; |
| else |
| return (selector * 50000) + 1700000; |
| } |
| |
| static int arizona_micsupp_map_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| unsigned int voltage; |
| int selector; |
| |
| if (min_uV < 1700000) |
| min_uV = 1700000; |
| |
| if (min_uV > 3200000) |
| selector = ARIZONA_MICSUPP_MAX_SELECTOR; |
| else |
| selector = DIV_ROUND_UP(min_uV - 1700000, 50000); |
| |
| if (selector < 0) |
| return -EINVAL; |
| |
| voltage = arizona_micsupp_list_voltage(rdev, selector); |
| if (voltage < min_uV || voltage > max_uV) |
| return -EINVAL; |
| |
| return selector; |
| } |
| |
| static struct regulator_ops arizona_micsupp_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| |
| .list_voltage = arizona_micsupp_list_voltage, |
| .map_voltage = arizona_micsupp_map_voltage, |
| |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| |
| .get_bypass = regulator_get_bypass_regmap, |
| .set_bypass = regulator_set_bypass_regmap, |
| }; |
| |
| static const struct regulator_desc arizona_micsupp = { |
| .name = "MICVDD", |
| .supply_name = "CPVDD", |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1, |
| .ops = &arizona_micsupp_ops, |
| |
| .vsel_reg = ARIZONA_LDO2_CONTROL_1, |
| .vsel_mask = ARIZONA_LDO2_VSEL_MASK, |
| .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1, |
| .enable_mask = ARIZONA_CPMIC_ENA, |
| .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, |
| .bypass_mask = ARIZONA_CPMIC_BYPASS, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct regulator_init_data arizona_micsupp_default = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS | |
| REGULATOR_CHANGE_VOLTAGE, |
| .min_uV = 1700000, |
| .max_uV = 3300000, |
| }, |
| |
| .num_consumer_supplies = 1, |
| }; |
| |
| static int arizona_micsupp_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| struct arizona_micsupp *micsupp; |
| int ret; |
| |
| micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL); |
| if (micsupp == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| micsupp->arizona = arizona; |
| |
| /* |
| * Since the chip usually supplies itself we provide some |
| * default init_data for it. This will be overridden with |
| * platform data if provided. |
| */ |
| micsupp->init_data = arizona_micsupp_default; |
| micsupp->init_data.consumer_supplies = &micsupp->supply; |
| micsupp->supply.supply = "MICVDD"; |
| micsupp->supply.dev_name = dev_name(arizona->dev); |
| |
| config.dev = arizona->dev; |
| config.driver_data = micsupp; |
| config.regmap = arizona->regmap; |
| |
| if (arizona->pdata.micvdd) |
| config.init_data = arizona->pdata.micvdd; |
| else |
| config.init_data = &micsupp->init_data; |
| |
| /* Default to regulated mode until the API supports bypass */ |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_CHARGE_PUMP_1, |
| ARIZONA_CPMIC_BYPASS, 0); |
| |
| micsupp->regulator = regulator_register(&arizona_micsupp, &config); |
| if (IS_ERR(micsupp->regulator)) { |
| ret = PTR_ERR(micsupp->regulator); |
| dev_err(arizona->dev, "Failed to register mic supply: %d\n", |
| ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, micsupp); |
| |
| return 0; |
| } |
| |
| static int arizona_micsupp_remove(struct platform_device *pdev) |
| { |
| struct arizona_micsupp *micsupp = platform_get_drvdata(pdev); |
| |
| regulator_unregister(micsupp->regulator); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_micsupp_driver = { |
| .probe = arizona_micsupp_probe, |
| .remove = arizona_micsupp_remove, |
| .driver = { |
| .name = "arizona-micsupp", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(arizona_micsupp_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("Arizona microphone supply driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:arizona-micsupp"); |