| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * GPIO driver for Exar XR17V35X chip |
| * |
| * Copyright (C) 2015 Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/idr.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define EXAR_OFFSET_MPIOLVL_LO 0x90 |
| #define EXAR_OFFSET_MPIOSEL_LO 0x93 |
| #define EXAR_OFFSET_MPIOLVL_HI 0x96 |
| #define EXAR_OFFSET_MPIOSEL_HI 0x99 |
| |
| /* |
| * The Device Configuration and UART Configuration Registers |
| * for each UART channel take 1KB of memory address space. |
| */ |
| #define EXAR_UART_CHANNEL_SIZE 0x400 |
| |
| #define DRIVER_NAME "gpio_exar" |
| |
| static DEFINE_IDA(ida_index); |
| |
| struct exar_gpio_chip { |
| struct gpio_chip gpio_chip; |
| struct regmap *regmap; |
| int index; |
| char name[20]; |
| unsigned int first_pin; |
| /* |
| * The offset to the cascaded device's (if existing) |
| * Device Configuration Registers. |
| */ |
| unsigned int cascaded_offset; |
| }; |
| |
| static unsigned int |
| exar_offset_to_sel_addr(struct exar_gpio_chip *exar_gpio, unsigned int offset) |
| { |
| unsigned int pin = exar_gpio->first_pin + (offset % 16); |
| unsigned int cascaded = offset / 16; |
| unsigned int addr = pin / 8 ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO; |
| |
| return addr + (cascaded ? exar_gpio->cascaded_offset : 0); |
| } |
| |
| static unsigned int |
| exar_offset_to_lvl_addr(struct exar_gpio_chip *exar_gpio, unsigned int offset) |
| { |
| unsigned int pin = exar_gpio->first_pin + (offset % 16); |
| unsigned int cascaded = offset / 16; |
| unsigned int addr = pin / 8 ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO; |
| |
| return addr + (cascaded ? exar_gpio->cascaded_offset : 0); |
| } |
| |
| static unsigned int |
| exar_offset_to_bit(struct exar_gpio_chip *exar_gpio, unsigned int offset) |
| { |
| unsigned int pin = exar_gpio->first_pin + (offset % 16); |
| |
| return pin % 8; |
| } |
| |
| static int exar_get_direction(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); |
| unsigned int addr = exar_offset_to_sel_addr(exar_gpio, offset); |
| unsigned int bit = exar_offset_to_bit(exar_gpio, offset); |
| |
| if (regmap_test_bits(exar_gpio->regmap, addr, BIT(bit))) |
| return GPIO_LINE_DIRECTION_IN; |
| |
| return GPIO_LINE_DIRECTION_OUT; |
| } |
| |
| static int exar_get_value(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); |
| unsigned int addr = exar_offset_to_lvl_addr(exar_gpio, offset); |
| unsigned int bit = exar_offset_to_bit(exar_gpio, offset); |
| |
| return !!(regmap_test_bits(exar_gpio->regmap, addr, BIT(bit))); |
| } |
| |
| static void exar_set_value(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); |
| unsigned int addr = exar_offset_to_lvl_addr(exar_gpio, offset); |
| unsigned int bit = exar_offset_to_bit(exar_gpio, offset); |
| |
| if (value) |
| regmap_set_bits(exar_gpio->regmap, addr, BIT(bit)); |
| else |
| regmap_clear_bits(exar_gpio->regmap, addr, BIT(bit)); |
| } |
| |
| static int exar_direction_output(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); |
| unsigned int addr = exar_offset_to_sel_addr(exar_gpio, offset); |
| unsigned int bit = exar_offset_to_bit(exar_gpio, offset); |
| |
| exar_set_value(chip, offset, value); |
| regmap_clear_bits(exar_gpio->regmap, addr, BIT(bit)); |
| |
| return 0; |
| } |
| |
| static int exar_direction_input(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); |
| unsigned int addr = exar_offset_to_sel_addr(exar_gpio, offset); |
| unsigned int bit = exar_offset_to_bit(exar_gpio, offset); |
| |
| regmap_set_bits(exar_gpio->regmap, addr, BIT(bit)); |
| |
| return 0; |
| } |
| |
| static void exar_devm_ida_free(void *data) |
| { |
| struct exar_gpio_chip *exar_gpio = data; |
| |
| ida_free(&ida_index, exar_gpio->index); |
| } |
| |
| static const struct regmap_config exar_regmap_config = { |
| .name = "exar-gpio", |
| .reg_bits = 16, |
| .val_bits = 8, |
| }; |
| |
| static int gpio_exar_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct pci_dev *pcidev = to_pci_dev(dev->parent); |
| struct exar_gpio_chip *exar_gpio; |
| u32 first_pin, ngpios; |
| void __iomem *p; |
| int index, ret; |
| |
| /* |
| * The UART driver must have mapped region 0 prior to registering this |
| * device - use it. |
| */ |
| p = pcim_iomap_table(pcidev)[0]; |
| if (!p) |
| return -ENOMEM; |
| |
| ret = device_property_read_u32(dev, "exar,first-pin", &first_pin); |
| if (ret) |
| return ret; |
| |
| ret = device_property_read_u32(dev, "ngpios", &ngpios); |
| if (ret) |
| return ret; |
| |
| exar_gpio = devm_kzalloc(dev, sizeof(*exar_gpio), GFP_KERNEL); |
| if (!exar_gpio) |
| return -ENOMEM; |
| |
| /* |
| * If cascaded, secondary xr17v354 or xr17v358 have the same amount |
| * of MPIOs as their primaries and the last 4 bits of the primary's |
| * PCI Device ID is the number of its UART channels. |
| */ |
| if (pcidev->device & GENMASK(15, 12)) { |
| ngpios += ngpios; |
| exar_gpio->cascaded_offset = (pcidev->device & GENMASK(3, 0)) * |
| EXAR_UART_CHANNEL_SIZE; |
| } |
| |
| /* |
| * We don't need to check the return values of mmio regmap operations (unless |
| * the regmap has a clock attached which is not the case here). |
| */ |
| exar_gpio->regmap = devm_regmap_init_mmio(dev, p, &exar_regmap_config); |
| if (IS_ERR(exar_gpio->regmap)) |
| return PTR_ERR(exar_gpio->regmap); |
| |
| index = ida_alloc(&ida_index, GFP_KERNEL); |
| if (index < 0) |
| return index; |
| |
| ret = devm_add_action_or_reset(dev, exar_devm_ida_free, exar_gpio); |
| if (ret) |
| return ret; |
| |
| sprintf(exar_gpio->name, "exar_gpio%d", index); |
| exar_gpio->gpio_chip.label = exar_gpio->name; |
| exar_gpio->gpio_chip.parent = dev; |
| exar_gpio->gpio_chip.direction_output = exar_direction_output; |
| exar_gpio->gpio_chip.direction_input = exar_direction_input; |
| exar_gpio->gpio_chip.get_direction = exar_get_direction; |
| exar_gpio->gpio_chip.get = exar_get_value; |
| exar_gpio->gpio_chip.set = exar_set_value; |
| exar_gpio->gpio_chip.base = -1; |
| exar_gpio->gpio_chip.ngpio = ngpios; |
| exar_gpio->index = index; |
| exar_gpio->first_pin = first_pin; |
| |
| ret = devm_gpiochip_add_data(dev, &exar_gpio->gpio_chip, exar_gpio); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, exar_gpio); |
| |
| return 0; |
| } |
| |
| static struct platform_driver gpio_exar_driver = { |
| .probe = gpio_exar_probe, |
| .driver = { |
| .name = DRIVER_NAME, |
| }, |
| }; |
| |
| module_platform_driver(gpio_exar_driver); |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_DESCRIPTION("Exar GPIO driver"); |
| MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>"); |
| MODULE_LICENSE("GPL"); |