| /* |
| * Copyright 2012-2015 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/clock/sun5i-ccu.h> |
| #include <dt-bindings/dma/sun4i-a10.h> |
| #include <dt-bindings/reset/sun5i-ccu.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a8"; |
| reg = <0x0>; |
| clocks = <&ccu CLK_CPU>; |
| }; |
| }; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| framebuffer-lcd0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0"; |
| clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; |
| status = "disabled"; |
| }; |
| |
| framebuffer-lcd0-tve0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0-tve0"; |
| clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, |
| <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: clk-24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: clk-32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ |
| default-pool { |
| compatible = "shared-dma-pool"; |
| size = <0x6000000>; |
| alloc-ranges = <0x40000000 0x10000000>; |
| reusable; |
| linux,cma-default; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| dma-ranges; |
| ranges; |
| |
| system-control@1c00000 { |
| compatible = "allwinner,sun5i-a13-system-control"; |
| reg = <0x01c00000 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_a: sram@0 { |
| compatible = "mmio-sram"; |
| reg = <0x00000000 0xc000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00000000 0xc000>; |
| |
| emac_sram: sram-section@8000 { |
| compatible = "allwinner,sun5i-a13-sram-a3-a4", |
| "allwinner,sun4i-a10-sram-a3-a4"; |
| reg = <0x8000 0x4000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sram_d: sram@10000 { |
| compatible = "mmio-sram"; |
| reg = <0x00010000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00010000 0x1000>; |
| |
| otg_sram: sram-section@0 { |
| compatible = "allwinner,sun5i-a13-sram-d", |
| "allwinner,sun4i-a10-sram-d"; |
| reg = <0x0000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sram_c: sram@1d00000 { |
| compatible = "mmio-sram"; |
| reg = <0x01d00000 0xd0000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x01d00000 0xd0000>; |
| |
| ve_sram: sram-section@0 { |
| compatible = "allwinner,sun5i-a13-sram-c1", |
| "allwinner,sun4i-a10-sram-c1"; |
| reg = <0x000000 0x80000>; |
| }; |
| }; |
| }; |
| |
| mbus: dram-controller@1c01000 { |
| compatible = "allwinner,sun5i-a13-mbus"; |
| reg = <0x01c01000 0x1000>; |
| clocks = <&ccu CLK_MBUS>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| dma-ranges = <0x00000000 0x40000000 0x20000000>; |
| #interconnect-cells = <1>; |
| }; |
| |
| dma: dma-controller@1c02000 { |
| compatible = "allwinner,sun4i-a10-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <27>; |
| clocks = <&ccu CLK_AHB_DMA>; |
| #dma-cells = <2>; |
| }; |
| |
| nfc: nand-controller@1c03000 { |
| compatible = "allwinner,sun4i-a10-nand"; |
| reg = <0x01c03000 0x1000>; |
| interrupts = <37>; |
| clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 3>; |
| dma-names = "rxtx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi0: spi@1c05000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c05000 0x1000>; |
| interrupts = <10>; |
| clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 27>, |
| <&dma SUN4I_DMA_DEDICATED 26>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@1c06000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c06000 0x1000>; |
| interrupts = <11>; |
| clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 9>, |
| <&dma SUN4I_DMA_DEDICATED 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tve0: tv-encoder@1c0a000 { |
| compatible = "allwinner,sun4i-a10-tv-encoder"; |
| reg = <0x01c0a000 0x1000>; |
| clocks = <&ccu CLK_AHB_TVE>; |
| resets = <&ccu RST_TVE>; |
| status = "disabled"; |
| |
| port { |
| |
| tve0_in_tcon0: endpoint { |
| remote-endpoint = <&tcon0_out_tve0>; |
| }; |
| }; |
| }; |
| |
| emac: ethernet@1c0b000 { |
| compatible = "allwinner,sun4i-a10-emac"; |
| reg = <0x01c0b000 0x1000>; |
| interrupts = <55>; |
| clocks = <&ccu CLK_AHB_EMAC>; |
| allwinner,sram = <&emac_sram 1>; |
| status = "disabled"; |
| }; |
| |
| mdio: mdio@1c0b080 { |
| compatible = "allwinner,sun4i-a10-mdio"; |
| reg = <0x01c0b080 0x14>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun5i-a13-tcon"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <44>; |
| dmas = <&dma SUN4I_DMA_DEDICATED 14>; |
| resets = <&ccu RST_LCD>; |
| reset-names = "lcd"; |
| clocks = <&ccu CLK_AHB_LCD>, |
| <&ccu CLK_TCON_CH0>, |
| <&ccu CLK_TCON_CH1>; |
| clock-names = "ahb", |
| "tcon-ch0", |
| "tcon-ch1"; |
| clock-output-names = "tcon-data-clock"; |
| #clock-cells = <0>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| reg = <0>; |
| |
| tcon0_in_be0: endpoint { |
| remote-endpoint = <&be0_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_tve0: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tve0_in_tcon0>; |
| allwinner,tcon-channel = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| video-codec@1c0e000 { |
| compatible = "allwinner,sun5i-a13-video-engine"; |
| reg = <0x01c0e000 0x1000>; |
| clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, |
| <&ccu CLK_DRAM_VE>; |
| clock-names = "ahb", "mod", "ram"; |
| resets = <&ccu RST_VE>; |
| interrupts = <53>; |
| allwinner,sram = <&ve_sram 1>; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; |
| clock-names = "ahb", "mmc"; |
| interrupts = <32>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; |
| clock-names = "ahb", "mmc"; |
| interrupts = <33>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@1c11000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; |
| clock-names = "ahb", "mmc"; |
| interrupts = <34>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| usb_otg: usb@1c13000 { |
| compatible = "allwinner,sun4i-a10-musb"; |
| reg = <0x01c13000 0x0400>; |
| clocks = <&ccu CLK_AHB_OTG>; |
| interrupts = <38>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| allwinner,sram = <&otg_sram 1>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@1c13400 { |
| #phy-cells = <1>; |
| compatible = "allwinner,sun5i-a13-usb-phy"; |
| reg = <0x01c13400 0x10>, <0x01c14800 0x4>; |
| reg-names = "phy_ctrl", "pmu1"; |
| clocks = <&ccu CLK_USB_PHY0>; |
| clock-names = "usb_phy"; |
| resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; |
| reset-names = "usb0_reset", "usb1_reset"; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@1c14000 { |
| compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; |
| reg = <0x01c14000 0x100>; |
| interrupts = <39>; |
| clocks = <&ccu CLK_AHB_EHCI>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@1c14400 { |
| compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; |
| reg = <0x01c14400 0x100>; |
| interrupts = <40>; |
| clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| crypto: crypto-engine@1c15000 { |
| compatible = "allwinner,sun5i-a13-crypto", |
| "allwinner,sun4i-a10-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <54>; |
| clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; |
| clock-names = "ahb", "mod"; |
| }; |
| |
| spi2: spi@1c17000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c17000 0x1000>; |
| interrupts = <12>; |
| clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 29>, |
| <&dma SUN4I_DMA_DEDICATED 28>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ccu: clock@1c20000 { |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc32k>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| intc: interrupt-controller@1c20400 { |
| compatible = "allwinner,sun4i-a10-ic"; |
| reg = <0x01c20400 0x400>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| reg = <0x01c20800 0x400>; |
| interrupts = <28>; |
| clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| emac_pd_pins: emac-pd-pins { |
| pins = "PD6", "PD7", "PD10", |
| "PD11", "PD12", "PD13", "PD14", |
| "PD15", "PD18", "PD19", "PD20", |
| "PD21", "PD22", "PD23", "PD24", |
| "PD25", "PD26", "PD27"; |
| function = "emac"; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| pins = "PB0", "PB1"; |
| function = "i2c0"; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| pins = "PB15", "PB16"; |
| function = "i2c1"; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| pins = "PB17", "PB18"; |
| function = "i2c2"; |
| }; |
| |
| ir0_rx_pin: ir0-rx-pin { |
| pins = "PB4"; |
| function = "ir0"; |
| }; |
| |
| lcd_rgb565_pins: lcd-rgb565-pins { |
| pins = "PD3", "PD4", "PD5", "PD6", "PD7", |
| "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| "PD19", "PD20", "PD21", "PD22", "PD23", |
| "PD24", "PD25", "PD26", "PD27"; |
| function = "lcd0"; |
| }; |
| |
| lcd_rgb666_pins: lcd-rgb666-pins { |
| pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", |
| "PD24", "PD25", "PD26", "PD27"; |
| function = "lcd0"; |
| }; |
| |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", "PF3", |
| "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { |
| pins = "PC6", "PC7", "PC8", "PC9", |
| "PC10", "PC11"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| /omit-if-no-ref/ |
| mmc2_4bit_pe_pins: mmc2-4bit-pe-pins { |
| pins = "PE4", "PE5", "PE6", "PE7", |
| "PE8", "PE9"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_8bit_pins: mmc2-8bit-pins { |
| pins = "PC6", "PC7", "PC8", "PC9", |
| "PC10", "PC11", "PC12", "PC13", |
| "PC14", "PC15"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| nand_pins: nand-pins { |
| pins = "PC0", "PC1", "PC2", |
| "PC5", "PC8", "PC9", "PC10", |
| "PC11", "PC12", "PC13", "PC14", |
| "PC15"; |
| function = "nand0"; |
| }; |
| |
| nand_cs0_pin: nand-cs0-pin { |
| pins = "PC4"; |
| function = "nand0"; |
| }; |
| |
| nand_rb0_pin: nand-rb0-pin { |
| pins = "PC6"; |
| function = "nand0"; |
| }; |
| |
| pwm0_pin: pwm0-pin { |
| pins = "PB2"; |
| function = "pwm"; |
| }; |
| |
| spi2_pe_pins: spi2-pe-pins { |
| pins = "PE1", "PE2", "PE3"; |
| function = "spi2"; |
| }; |
| |
| spi2_cs0_pe_pin: spi2-cs0-pe-pin { |
| pins = "PE0"; |
| function = "spi2"; |
| }; |
| |
| uart1_pe_pins: uart1-pe-pins { |
| pins = "PE10", "PE11"; |
| function = "uart1"; |
| }; |
| |
| uart1_pg_pins: uart1-pg-pins { |
| pins = "PG3", "PG4"; |
| function = "uart1"; |
| }; |
| |
| uart2_pd_pins: uart2-pd-pins { |
| pins = "PD2", "PD3"; |
| function = "uart2"; |
| }; |
| |
| uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins { |
| pins = "PD4", "PD5"; |
| function = "uart2"; |
| }; |
| |
| uart3_pg_pins: uart3-pg-pins { |
| pins = "PG9", "PG10"; |
| function = "uart3"; |
| }; |
| |
| uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { |
| pins = "PG11", "PG12"; |
| function = "uart3"; |
| }; |
| }; |
| |
| timer@1c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0x90>; |
| interrupts = <22>, |
| <23>, |
| <24>, |
| <25>, |
| <67>, |
| <68>; |
| clocks = <&ccu CLK_HOSC>; |
| }; |
| |
| wdt: watchdog@1c20c90 { |
| compatible = "allwinner,sun4i-a10-wdt"; |
| reg = <0x01c20c90 0x10>; |
| interrupts = <24>; |
| clocks = <&osc24M>; |
| }; |
| |
| ir0: ir@1c21800 { |
| compatible = "allwinner,sun4i-a10-ir"; |
| clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; |
| clock-names = "apb", "ir"; |
| interrupts = <5>; |
| reg = <0x01c21800 0x40>; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@1c22800 { |
| compatible = "allwinner,sun4i-a10-lradc-keys"; |
| reg = <0x01c22800 0x100>; |
| interrupts = <31>; |
| status = "disabled"; |
| }; |
| |
| codec: codec@1c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-codec"; |
| reg = <0x01c22c00 0x40>; |
| interrupts = <30>; |
| clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; |
| clock-names = "apb", "codec"; |
| dmas = <&dma SUN4I_DMA_NORMAL 19>, |
| <&dma SUN4I_DMA_NORMAL 19>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sid: eeprom@1c23800 { |
| compatible = "allwinner,sun4i-a10-sid"; |
| reg = <0x01c23800 0x10>; |
| }; |
| |
| rtp: rtp@1c25000 { |
| compatible = "allwinner,sun5i-a13-ts"; |
| reg = <0x01c25000 0x100>; |
| interrupts = <29>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| uart0: serial@1c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <1>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <2>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <3>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART3>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1c2ac00 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <7>; |
| clocks = <&ccu CLK_APB1_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@1c2b000 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <8>; |
| clocks = <&ccu CLK_APB1_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@1c2b400 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <9>; |
| clocks = <&ccu CLK_APB1_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mali: gpu@1c40000 { |
| compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; |
| reg = <0x01c40000 0x10000>; |
| interrupts = <69>, <70>, <71>, <72>, <73>; |
| interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu"; |
| clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; |
| clock-names = "bus", "core"; |
| resets = <&ccu RST_GPU>; |
| assigned-clocks = <&ccu CLK_GPU>; |
| assigned-clock-rates = <320000000>; |
| }; |
| |
| timer@1c60000 { |
| compatible = "allwinner,sun5i-a13-hstimer"; |
| reg = <0x01c60000 0x1000>; |
| interrupts = <82>, <83>; |
| clocks = <&ccu CLK_AHB_HSTIMER>; |
| }; |
| |
| fe0: display-frontend@1e00000 { |
| compatible = "allwinner,sun5i-a13-display-frontend"; |
| reg = <0x01e00000 0x20000>; |
| interrupts = <47>; |
| clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, |
| <&ccu CLK_DRAM_DE_FE>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_FE>; |
| interconnects = <&mbus 19>; |
| interconnect-names = "dma-mem"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fe0_out: port@1 { |
| reg = <1>; |
| |
| fe0_out_be0: endpoint { |
| remote-endpoint = <&be0_in_fe0>; |
| }; |
| }; |
| }; |
| }; |
| |
| be0: display-backend@1e60000 { |
| compatible = "allwinner,sun5i-a13-display-backend"; |
| reg = <0x01e60000 0x10000>; |
| interrupts = <47>; |
| clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| <&ccu CLK_DRAM_DE_BE>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_BE>; |
| interconnects = <&mbus 18>; |
| interconnect-names = "dma-mem"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| be0_in: port@0 { |
| reg = <0>; |
| |
| be0_in_fe0: endpoint { |
| remote-endpoint = <&fe0_out_be0>; |
| }; |
| }; |
| |
| be0_out: port@1 { |
| reg = <1>; |
| |
| be0_out_tcon0: endpoint { |
| remote-endpoint = <&tcon0_in_be0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
