| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * IIO driver for the Measurement Computing CIO-DAC |
| * Copyright (C) 2016 William Breathitt Gray |
| * |
| * This driver supports the following Measurement Computing devices: CIO-DAC16, |
| * CIO-DAC08, and PC104-DAC06. |
| */ |
| #include <linux/bits.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/types.h> |
| #include <linux/isa.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| |
| #define CIO_DAC_NUM_CHAN 16 |
| |
| #define CIO_DAC_CHAN(chan) { \ |
| .type = IIO_VOLTAGE, \ |
| .channel = chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .indexed = 1, \ |
| .output = 1 \ |
| } |
| |
| #define CIO_DAC_EXTENT 32 |
| |
| static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)]; |
| static unsigned int num_cio_dac; |
| module_param_hw_array(base, uint, ioport, &num_cio_dac, 0); |
| MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses"); |
| |
| #define CIO_DAC_BASE 0x00 |
| #define CIO_DAC_CHANNEL_STRIDE 2 |
| |
| static bool cio_dac_precious_reg(struct device *dev, unsigned int reg) |
| { |
| /* |
| * All registers are considered precious; if the XFER jumper is set on |
| * the device, then no update occurs until a DAC register is read. |
| */ |
| return true; |
| } |
| |
| static const struct regmap_config cio_dac_regmap_config = { |
| .reg_bits = 16, |
| .reg_stride = 2, |
| .val_bits = 16, |
| .io_port = true, |
| .max_register = 0x1F, |
| .precious_reg = cio_dac_precious_reg, |
| }; |
| |
| /** |
| * struct cio_dac_iio - IIO device private data structure |
| * @map: Regmap for the device |
| */ |
| struct cio_dac_iio { |
| struct regmap *map; |
| }; |
| |
| static int cio_dac_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, int *val2, long mask) |
| { |
| struct cio_dac_iio *const priv = iio_priv(indio_dev); |
| const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE; |
| int err; |
| unsigned int dac_val; |
| |
| if (mask != IIO_CHAN_INFO_RAW) |
| return -EINVAL; |
| |
| err = regmap_read(priv->map, CIO_DAC_BASE + offset, &dac_val); |
| if (err) |
| return err; |
| |
| *val = dac_val; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int cio_dac_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, int val2, long mask) |
| { |
| struct cio_dac_iio *const priv = iio_priv(indio_dev); |
| const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE; |
| |
| if (mask != IIO_CHAN_INFO_RAW) |
| return -EINVAL; |
| |
| /* DAC can only accept up to a 12-bit value */ |
| if ((unsigned int)val > 4095) |
| return -EINVAL; |
| |
| return regmap_write(priv->map, CIO_DAC_BASE + offset, val); |
| } |
| |
| static const struct iio_info cio_dac_info = { |
| .read_raw = cio_dac_read_raw, |
| .write_raw = cio_dac_write_raw |
| }; |
| |
| static const struct iio_chan_spec cio_dac_channels[CIO_DAC_NUM_CHAN] = { |
| CIO_DAC_CHAN(0), CIO_DAC_CHAN(1), CIO_DAC_CHAN(2), CIO_DAC_CHAN(3), |
| CIO_DAC_CHAN(4), CIO_DAC_CHAN(5), CIO_DAC_CHAN(6), CIO_DAC_CHAN(7), |
| CIO_DAC_CHAN(8), CIO_DAC_CHAN(9), CIO_DAC_CHAN(10), CIO_DAC_CHAN(11), |
| CIO_DAC_CHAN(12), CIO_DAC_CHAN(13), CIO_DAC_CHAN(14), CIO_DAC_CHAN(15) |
| }; |
| |
| static int cio_dac_probe(struct device *dev, unsigned int id) |
| { |
| struct iio_dev *indio_dev; |
| struct cio_dac_iio *priv; |
| void __iomem *regs; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| if (!devm_request_region(dev, base[id], CIO_DAC_EXTENT, |
| dev_name(dev))) { |
| dev_err(dev, "Unable to request port addresses (0x%X-0x%X)\n", |
| base[id], base[id] + CIO_DAC_EXTENT); |
| return -EBUSY; |
| } |
| |
| regs = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT); |
| if (!regs) |
| return -ENOMEM; |
| |
| priv = iio_priv(indio_dev); |
| priv->map = devm_regmap_init_mmio(dev, regs, &cio_dac_regmap_config); |
| if (IS_ERR(priv->map)) |
| return dev_err_probe(dev, PTR_ERR(priv->map), |
| "Unable to initialize register map\n"); |
| |
| indio_dev->info = &cio_dac_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = cio_dac_channels; |
| indio_dev->num_channels = CIO_DAC_NUM_CHAN; |
| indio_dev->name = dev_name(dev); |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static struct isa_driver cio_dac_driver = { |
| .probe = cio_dac_probe, |
| .driver = { |
| .name = "cio-dac" |
| } |
| }; |
| |
| module_isa_driver(cio_dac_driver, num_cio_dac); |
| |
| MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); |
| MODULE_DESCRIPTION("Measurement Computing CIO-DAC IIO driver"); |
| MODULE_LICENSE("GPL v2"); |