| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2021 Google LLC. |
| * |
| * Driver for Semtech's SX9324 capacitive proximity/button solution. |
| * Based on SX9324 driver and copy of datasheet at: |
| * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bits.h> |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/iio/iio.h> |
| |
| #include "sx_common.h" |
| |
| /* Register definitions. */ |
| #define SX9324_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC |
| #define SX9324_REG_STAT0 0x01 |
| #define SX9324_REG_STAT1 0x02 |
| #define SX9324_REG_STAT2 0x03 |
| #define SX9324_REG_STAT2_COMPSTAT_MASK GENMASK(3, 0) |
| #define SX9324_REG_STAT3 0x04 |
| #define SX9324_REG_IRQ_MSK 0x05 |
| #define SX9324_CONVDONE_IRQ BIT(3) |
| #define SX9324_FAR_IRQ BIT(5) |
| #define SX9324_CLOSE_IRQ BIT(6) |
| #define SX9324_REG_IRQ_CFG0 0x06 |
| #define SX9324_REG_IRQ_CFG1 0x07 |
| #define SX9324_REG_IRQ_CFG1_FAILCOND 0x80 |
| #define SX9324_REG_IRQ_CFG2 0x08 |
| |
| #define SX9324_REG_GNRL_CTRL0 0x10 |
| #define SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK GENMASK(4, 0) |
| #define SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS 0x16 |
| #define SX9324_REG_GNRL_CTRL1 0x11 |
| #define SX9324_REG_GNRL_CTRL1_PHEN_MASK GENMASK(3, 0) |
| #define SX9324_REG_GNRL_CTRL1_PAUSECTRL 0x20 |
| |
| #define SX9324_REG_I2C_ADDR 0x14 |
| #define SX9324_REG_CLK_SPRD 0x15 |
| |
| #define SX9324_REG_AFE_CTRL0 0x20 |
| #define SX9324_REG_AFE_CTRL0_RINT_SHIFT 6 |
| #define SX9324_REG_AFE_CTRL0_RINT_MASK \ |
| GENMASK(SX9324_REG_AFE_CTRL0_RINT_SHIFT + 1, \ |
| SX9324_REG_AFE_CTRL0_RINT_SHIFT) |
| #define SX9324_REG_AFE_CTRL0_RINT_LOWEST 0x00 |
| #define SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT 4 |
| #define SX9324_REG_AFE_CTRL0_CSIDLE_MASK \ |
| GENMASK(SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT + 1, \ |
| SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT) |
| #define SX9324_REG_AFE_CTRL0_RINT_LOWEST 0x00 |
| #define SX9324_REG_AFE_CTRL1 0x21 |
| #define SX9324_REG_AFE_CTRL2 0x22 |
| #define SX9324_REG_AFE_CTRL3 0x23 |
| #define SX9324_REG_AFE_CTRL4 0x24 |
| #define SX9324_REG_AFE_CTRL4_FREQ_83_33HZ 0x40 |
| #define SX9324_REG_AFE_CTRL4_RESOLUTION_MASK GENMASK(2, 0) |
| #define SX9324_REG_AFE_CTRL4_RES_100 0x04 |
| #define SX9324_REG_AFE_CTRL5 0x25 |
| #define SX9324_REG_AFE_CTRL6 0x26 |
| #define SX9324_REG_AFE_CTRL7 0x27 |
| #define SX9324_REG_AFE_PH0 0x28 |
| #define SX9324_REG_AFE_PH0_PIN_MASK(_pin) \ |
| GENMASK(2 * (_pin) + 1, 2 * (_pin)) |
| |
| #define SX9324_REG_AFE_PH1 0x29 |
| #define SX9324_REG_AFE_PH2 0x2a |
| #define SX9324_REG_AFE_PH3 0x2b |
| #define SX9324_REG_AFE_CTRL8 0x2c |
| #define SX9324_REG_AFE_CTRL8_RESERVED 0x10 |
| #define SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM 0x02 |
| #define SX9324_REG_AFE_CTRL8_RESFILTIN_MASK GENMASK(3, 0) |
| #define SX9324_REG_AFE_CTRL9 0x2d |
| #define SX9324_REG_AFE_CTRL9_AGAIN_MASK GENMASK(3, 0) |
| #define SX9324_REG_AFE_CTRL9_AGAIN_1 0x08 |
| |
| #define SX9324_REG_PROX_CTRL0 0x30 |
| #define SX9324_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3) |
| #define SX9324_REG_PROX_CTRL0_GAIN_SHIFT 3 |
| #define SX9324_REG_PROX_CTRL0_GAIN_RSVD 0x0 |
| #define SX9324_REG_PROX_CTRL0_GAIN_1 0x1 |
| #define SX9324_REG_PROX_CTRL0_GAIN_8 0x4 |
| #define SX9324_REG_PROX_CTRL0_RAWFILT_MASK GENMASK(2, 0) |
| #define SX9324_REG_PROX_CTRL0_RAWFILT_1P50 0x01 |
| #define SX9324_REG_PROX_CTRL1 0x31 |
| #define SX9324_REG_PROX_CTRL2 0x32 |
| #define SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K 0x20 |
| #define SX9324_REG_PROX_CTRL3 0x33 |
| #define SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES 0x40 |
| #define SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K 0x20 |
| #define SX9324_REG_PROX_CTRL4 0x34 |
| #define SX9324_REG_PROX_CTRL4_AVGNEGFILT_MASK GENMASK(5, 3) |
| #define SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 0x08 |
| #define SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK GENMASK(2, 0) |
| #define SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 0x04 |
| #define SX9324_REG_PROX_CTRL5 0x35 |
| #define SX9324_REG_PROX_CTRL5_HYST_MASK GENMASK(5, 4) |
| #define SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) |
| #define SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK GENMASK(1, 0) |
| #define SX9324_REG_PROX_CTRL6 0x36 |
| #define SX9324_REG_PROX_CTRL6_PROXTHRESH_32 0x08 |
| #define SX9324_REG_PROX_CTRL7 0x37 |
| |
| #define SX9324_REG_ADV_CTRL0 0x40 |
| #define SX9324_REG_ADV_CTRL1 0x41 |
| #define SX9324_REG_ADV_CTRL2 0x42 |
| #define SX9324_REG_ADV_CTRL3 0x43 |
| #define SX9324_REG_ADV_CTRL4 0x44 |
| #define SX9324_REG_ADV_CTRL5 0x45 |
| #define SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK GENMASK(3, 2) |
| #define SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 0x04 |
| #define SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 0x01 |
| #define SX9324_REG_ADV_CTRL6 0x46 |
| #define SX9324_REG_ADV_CTRL7 0x47 |
| #define SX9324_REG_ADV_CTRL8 0x48 |
| #define SX9324_REG_ADV_CTRL9 0x49 |
| #define SX9324_REG_ADV_CTRL10 0x4a |
| #define SX9324_REG_ADV_CTRL11 0x4b |
| #define SX9324_REG_ADV_CTRL12 0x4c |
| #define SX9324_REG_ADV_CTRL13 0x4d |
| #define SX9324_REG_ADV_CTRL14 0x4e |
| #define SX9324_REG_ADV_CTRL15 0x4f |
| #define SX9324_REG_ADV_CTRL16 0x50 |
| #define SX9324_REG_ADV_CTRL17 0x51 |
| #define SX9324_REG_ADV_CTRL18 0x52 |
| #define SX9324_REG_ADV_CTRL19 0x53 |
| #define SX9324_REG_ADV_CTRL20 0x54 |
| #define SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION 0xf0 |
| |
| #define SX9324_REG_PHASE_SEL 0x60 |
| |
| #define SX9324_REG_USEFUL_MSB 0x61 |
| #define SX9324_REG_USEFUL_LSB 0x62 |
| |
| #define SX9324_REG_AVG_MSB 0x63 |
| #define SX9324_REG_AVG_LSB 0x64 |
| |
| #define SX9324_REG_DIFF_MSB 0x65 |
| #define SX9324_REG_DIFF_LSB 0x66 |
| |
| #define SX9324_REG_OFFSET_MSB 0x67 |
| #define SX9324_REG_OFFSET_LSB 0x68 |
| |
| #define SX9324_REG_SAR_MSB 0x69 |
| #define SX9324_REG_SAR_LSB 0x6a |
| |
| #define SX9324_REG_RESET 0x9f |
| /* Write this to REG_RESET to do a soft reset. */ |
| #define SX9324_SOFT_RESET 0xde |
| |
| #define SX9324_REG_WHOAMI 0xfa |
| #define SX9324_WHOAMI_VALUE 0x23 |
| |
| #define SX9324_REG_REVISION 0xfe |
| |
| /* 4 channels, as defined in STAT0: PH0, PH1, PH2 and PH3. */ |
| #define SX9324_NUM_CHANNELS 4 |
| /* 3 CS pins: CS0, CS1, CS2. */ |
| #define SX9324_NUM_PINS 3 |
| |
| static const char * const sx9324_cs_pin_usage[] = { "HZ", "MI", "DS", "GD" }; |
| |
| static ssize_t sx9324_phase_configuration_show(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| char *buf) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| unsigned int val; |
| int i, ret, pin_idx; |
| size_t len = 0; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_AFE_PH0 + chan->channel, &val); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < SX9324_NUM_PINS; i++) { |
| pin_idx = (val & SX9324_REG_AFE_PH0_PIN_MASK(i)) >> (2 * i); |
| len += sysfs_emit_at(buf, len, "%s,", |
| sx9324_cs_pin_usage[pin_idx]); |
| } |
| buf[len - 1] = '\n'; |
| return len; |
| } |
| |
| static const struct iio_chan_spec_ext_info sx9324_channel_ext_info[] = { |
| { |
| .name = "setup", |
| .shared = IIO_SEPARATE, |
| .read = sx9324_phase_configuration_show, |
| }, |
| {} |
| }; |
| |
| #define SX9324_CHANNEL(idx) \ |
| { \ |
| .type = IIO_PROXIMITY, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .info_mask_separate_available = \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .info_mask_shared_by_all_available = \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .indexed = 1, \ |
| .channel = idx, \ |
| .address = SX9324_REG_DIFF_MSB, \ |
| .event_spec = sx_common_events, \ |
| .num_event_specs = ARRAY_SIZE(sx_common_events), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| .ext_info = sx9324_channel_ext_info, \ |
| } |
| |
| static const struct iio_chan_spec sx9324_channels[] = { |
| SX9324_CHANNEL(0), /* Phase 0 */ |
| SX9324_CHANNEL(1), /* Phase 1 */ |
| SX9324_CHANNEL(2), /* Phase 2 */ |
| SX9324_CHANNEL(3), /* Phase 3 */ |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| /* |
| * Each entry contains the integer part (val) and the fractional part, in micro |
| * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. |
| */ |
| static const struct { |
| int val; |
| int val2; |
| } sx9324_samp_freq_table[] = { |
| { 1000, 0 }, /* 00000: Min (no idle time) */ |
| { 500, 0 }, /* 00001: 2 ms */ |
| { 250, 0 }, /* 00010: 4 ms */ |
| { 166, 666666 }, /* 00011: 6 ms */ |
| { 125, 0 }, /* 00100: 8 ms */ |
| { 100, 0 }, /* 00101: 10 ms */ |
| { 71, 428571 }, /* 00110: 14 ms */ |
| { 55, 555556 }, /* 00111: 18 ms */ |
| { 45, 454545 }, /* 01000: 22 ms */ |
| { 38, 461538 }, /* 01001: 26 ms */ |
| { 33, 333333 }, /* 01010: 30 ms */ |
| { 29, 411765 }, /* 01011: 34 ms */ |
| { 26, 315789 }, /* 01100: 38 ms */ |
| { 23, 809524 }, /* 01101: 42 ms */ |
| { 21, 739130 }, /* 01110: 46 ms */ |
| { 20, 0 }, /* 01111: 50 ms */ |
| { 17, 857143 }, /* 10000: 56 ms */ |
| { 16, 129032 }, /* 10001: 62 ms */ |
| { 14, 705882 }, /* 10010: 68 ms */ |
| { 13, 513514 }, /* 10011: 74 ms */ |
| { 12, 500000 }, /* 10100: 80 ms */ |
| { 11, 111111 }, /* 10101: 90 ms */ |
| { 10, 0 }, /* 10110: 100 ms (Typ.) */ |
| { 5, 0 }, /* 10111: 200 ms */ |
| { 3, 333333 }, /* 11000: 300 ms */ |
| { 2, 500000 }, /* 11001: 400 ms */ |
| { 1, 666667 }, /* 11010: 600 ms */ |
| { 1, 250000 }, /* 11011: 800 ms */ |
| { 1, 0 }, /* 11100: 1 s */ |
| { 0, 500000 }, /* 11101: 2 s */ |
| { 0, 333333 }, /* 11110: 3 s */ |
| { 0, 250000 }, /* 11111: 4 s */ |
| }; |
| |
| static const unsigned int sx9324_scan_period_table[] = { |
| 2, 15, 30, 45, 60, 90, 120, 200, |
| 400, 600, 800, 1000, 2000, 3000, 4000, 5000, |
| }; |
| |
| static const struct regmap_range sx9324_writable_reg_ranges[] = { |
| /* |
| * To set COMPSTAT for compensation, even if datasheet says register is |
| * RO. |
| */ |
| regmap_reg_range(SX9324_REG_STAT2, SX9324_REG_STAT2), |
| regmap_reg_range(SX9324_REG_IRQ_MSK, SX9324_REG_IRQ_CFG2), |
| regmap_reg_range(SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL1), |
| /* Leave i2c and clock spreading as unavailable */ |
| regmap_reg_range(SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL9), |
| regmap_reg_range(SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL7), |
| regmap_reg_range(SX9324_REG_ADV_CTRL0, SX9324_REG_ADV_CTRL20), |
| regmap_reg_range(SX9324_REG_PHASE_SEL, SX9324_REG_PHASE_SEL), |
| regmap_reg_range(SX9324_REG_OFFSET_MSB, SX9324_REG_OFFSET_LSB), |
| regmap_reg_range(SX9324_REG_RESET, SX9324_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9324_writeable_regs = { |
| .yes_ranges = sx9324_writable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9324_writable_reg_ranges), |
| }; |
| |
| /* |
| * All allocated registers are readable, so we just list unallocated |
| * ones. |
| */ |
| static const struct regmap_range sx9324_non_readable_reg_ranges[] = { |
| regmap_reg_range(SX9324_REG_IRQ_CFG2 + 1, SX9324_REG_GNRL_CTRL0 - 1), |
| regmap_reg_range(SX9324_REG_GNRL_CTRL1 + 1, SX9324_REG_AFE_CTRL0 - 1), |
| regmap_reg_range(SX9324_REG_AFE_CTRL9 + 1, SX9324_REG_PROX_CTRL0 - 1), |
| regmap_reg_range(SX9324_REG_PROX_CTRL7 + 1, SX9324_REG_ADV_CTRL0 - 1), |
| regmap_reg_range(SX9324_REG_ADV_CTRL20 + 1, SX9324_REG_PHASE_SEL - 1), |
| regmap_reg_range(SX9324_REG_SAR_LSB + 1, SX9324_REG_RESET - 1), |
| regmap_reg_range(SX9324_REG_RESET + 1, SX9324_REG_WHOAMI - 1), |
| regmap_reg_range(SX9324_REG_WHOAMI + 1, SX9324_REG_REVISION - 1), |
| }; |
| |
| static const struct regmap_access_table sx9324_readable_regs = { |
| .no_ranges = sx9324_non_readable_reg_ranges, |
| .n_no_ranges = ARRAY_SIZE(sx9324_non_readable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9324_volatile_reg_ranges[] = { |
| regmap_reg_range(SX9324_REG_IRQ_SRC, SX9324_REG_STAT3), |
| regmap_reg_range(SX9324_REG_USEFUL_MSB, SX9324_REG_DIFF_LSB), |
| regmap_reg_range(SX9324_REG_SAR_MSB, SX9324_REG_SAR_LSB), |
| regmap_reg_range(SX9324_REG_WHOAMI, SX9324_REG_WHOAMI), |
| regmap_reg_range(SX9324_REG_REVISION, SX9324_REG_REVISION), |
| }; |
| |
| static const struct regmap_access_table sx9324_volatile_regs = { |
| .yes_ranges = sx9324_volatile_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9324_volatile_reg_ranges), |
| }; |
| |
| static const struct regmap_config sx9324_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = SX9324_REG_REVISION, |
| .cache_type = REGCACHE_RBTREE, |
| |
| .wr_table = &sx9324_writeable_regs, |
| .rd_table = &sx9324_readable_regs, |
| .volatile_table = &sx9324_volatile_regs, |
| }; |
| |
| static int sx9324_read_prox_data(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, |
| __be16 *val) |
| { |
| int ret; |
| |
| ret = regmap_write(data->regmap, SX9324_REG_PHASE_SEL, chan->channel); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); |
| } |
| |
| /* |
| * If we have no interrupt support, we have to wait for a scan period |
| * after enabling a channel to get a result. |
| */ |
| static int sx9324_wait_for_sample(struct sx_common_data *data) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &val); |
| if (ret < 0) |
| return ret; |
| val = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, val); |
| |
| msleep(sx9324_scan_period_table[val]); |
| |
| return 0; |
| } |
| |
| static int sx9324_read_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int reg, regval; |
| int ret; |
| |
| reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9324_REG_PROX_CTRL0_GAIN_MASK, regval); |
| if (regval) |
| regval--; |
| else if (regval == SX9324_REG_PROX_CTRL0_GAIN_RSVD || |
| regval > SX9324_REG_PROX_CTRL0_GAIN_8) |
| return -EINVAL; |
| |
| *val = 1 << regval; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9324_read_samp_freq(struct sx_common_data *data, |
| int *val, int *val2) |
| { |
| int ret; |
| unsigned int regval; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, regval); |
| *val = sx9324_samp_freq_table[regval].val; |
| *val2 = sx9324_samp_freq_table[regval].val2; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int sx9324_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| int *val, int *val2, long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = sx_common_read_proximity(data, chan, val); |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = sx9324_read_gain(data, chan, val); |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9324_read_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const int sx9324_gain_vals[] = { 1, 2, 4, 8 }; |
| |
| static int sx9324_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *type = IIO_VAL_INT; |
| *length = ARRAY_SIZE(sx9324_gain_vals); |
| *vals = sx9324_gain_vals; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = ARRAY_SIZE(sx9324_samp_freq_table) * 2; |
| *vals = (int *)sx9324_samp_freq_table; |
| return IIO_AVAIL_LIST; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9324_set_samp_freq(struct sx_common_data *data, |
| int val, int val2) |
| { |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++) |
| if (val == sx9324_samp_freq_table[i].val && |
| val2 == sx9324_samp_freq_table[i].val2) |
| break; |
| |
| if (i == ARRAY_SIZE(sx9324_samp_freq_table)) |
| return -EINVAL; |
| |
| mutex_lock(&data->mutex); |
| |
| ret = regmap_update_bits(data->regmap, |
| SX9324_REG_GNRL_CTRL0, |
| SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i); |
| |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_read_thresh(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval; |
| unsigned int reg; |
| int ret; |
| |
| /* |
| * TODO(gwendal): Depending on the phase function |
| * (proximity/table/body), retrieve the right threshold. |
| * For now, return the proximity threshold. |
| */ |
| reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| if (regval <= 1) |
| *val = regval; |
| else |
| *val = (regval * regval) / 2; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9324_read_hysteresis(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval, pthresh; |
| int ret; |
| |
| ret = sx9324_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9324_REG_PROX_CTRL5_HYST_MASK, regval); |
| if (!regval) |
| *val = 0; |
| else |
| *val = pthresh >> (5 - regval); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9324_read_far_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9324_read_close_debounce(struct sx_common_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9324_read_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int *val, int *val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9324_read_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9324_read_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9324_read_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9324_read_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9324_write_thresh(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int _val) |
| { |
| unsigned int reg, val = _val; |
| int ret; |
| |
| reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; |
| |
| if (val >= 1) |
| val = int_sqrt(2 * val); |
| |
| if (val > 0xff) |
| return -EINVAL; |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_write(data->regmap, reg, val); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_write_hysteresis(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int _val) |
| { |
| unsigned int hyst, val = _val; |
| int ret, pthresh; |
| |
| ret = sx9324_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| if (val == 0) |
| hyst = 0; |
| else if (val >= pthresh >> 2) |
| hyst = 3; |
| else if (val >= pthresh >> 3) |
| hyst = 2; |
| else if (val >= pthresh >> 4) |
| hyst = 1; |
| else |
| return -EINVAL; |
| |
| hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, |
| SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_write_far_debounce(struct sx_common_data *data, int _val) |
| { |
| unsigned int regval, val = _val; |
| int ret; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, |
| SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, |
| regval); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_write_close_debounce(struct sx_common_data *data, int _val) |
| { |
| unsigned int regval, val = _val; |
| int ret; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, |
| SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, |
| regval); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_write_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int val, int val2) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9324_write_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9324_write_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9324_write_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9324_write_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9324_write_gain(struct sx_common_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int gain, reg; |
| int ret; |
| |
| reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; |
| |
| gain = ilog2(val) + 1; |
| if (val <= 0 || gain > SX9324_REG_PROX_CTRL0_GAIN_8) |
| return -EINVAL; |
| |
| gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, reg, |
| SX9324_REG_PROX_CTRL0_GAIN_MASK, |
| gain); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9324_write_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int val, int val2, |
| long mask) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9324_set_samp_freq(data, val, val2); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return sx9324_write_gain(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct sx_common_reg_default sx9324_default_regs[] = { |
| { SX9324_REG_IRQ_MSK, 0x00 }, |
| { SX9324_REG_IRQ_CFG0, 0x00, "irq_cfg0" }, |
| { SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND, "irq_cfg1" }, |
| { SX9324_REG_IRQ_CFG2, 0x00, "irq_cfg2" }, |
| { SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS, "gnrl_ctrl0" }, |
| /* |
| * The lower 4 bits should not be set as it enable sensors measurements. |
| * Turning the detection on before the configuration values are set to |
| * good values can cause the device to return erroneous readings. |
| */ |
| { SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL, "gnrl_ctrl1" }, |
| |
| { SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST, "afe_ctrl0" }, |
| { SX9324_REG_AFE_CTRL3, 0x00, "afe_ctrl3" }, |
| { SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ | |
| SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl4" }, |
| { SX9324_REG_AFE_CTRL6, 0x00, "afe_ctrl6" }, |
| { SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ | |
| SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl7" }, |
| |
| /* TODO(gwendal): PHx use chip default or all grounded? */ |
| { SX9324_REG_AFE_PH0, 0x29, "afe_ph0" }, |
| { SX9324_REG_AFE_PH1, 0x26, "afe_ph1" }, |
| { SX9324_REG_AFE_PH2, 0x1a, "afe_ph2" }, |
| { SX9324_REG_AFE_PH3, 0x16, "afe_ph3" }, |
| |
| { SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESERVED | |
| SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM, "afe_ctrl8" }, |
| { SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1, "afe_ctrl9" }, |
| |
| { SX9324_REG_PROX_CTRL0, |
| SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT | |
| SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0" }, |
| { SX9324_REG_PROX_CTRL1, |
| SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT | |
| SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl1" }, |
| { SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K, "prox_ctrl2" }, |
| { SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES | |
| SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K, "prox_ctrl3" }, |
| { SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 | |
| SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256, "prox_ctrl4" }, |
| { SX9324_REG_PROX_CTRL5, 0x00, "prox_ctrl5" }, |
| { SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl6" }, |
| { SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl7" }, |
| { SX9324_REG_ADV_CTRL0, 0x00, "adv_ctrl0" }, |
| { SX9324_REG_ADV_CTRL1, 0x00, "adv_ctrl1" }, |
| { SX9324_REG_ADV_CTRL2, 0x00, "adv_ctrl2" }, |
| { SX9324_REG_ADV_CTRL3, 0x00, "adv_ctrl3" }, |
| { SX9324_REG_ADV_CTRL4, 0x00, "adv_ctrl4" }, |
| { SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 | |
| SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1, "adv_ctrl5" }, |
| { SX9324_REG_ADV_CTRL6, 0x00, "adv_ctrl6" }, |
| { SX9324_REG_ADV_CTRL7, 0x00, "adv_ctrl7" }, |
| { SX9324_REG_ADV_CTRL8, 0x00, "adv_ctrl8" }, |
| { SX9324_REG_ADV_CTRL9, 0x00, "adv_ctrl9" }, |
| /* Body/Table threshold */ |
| { SX9324_REG_ADV_CTRL10, 0x00, "adv_ctrl10" }, |
| { SX9324_REG_ADV_CTRL11, 0x00, "adv_ctrl11" }, |
| { SX9324_REG_ADV_CTRL12, 0x00, "adv_ctrl12" }, |
| /* TODO(gwendal): SAR currenly disabled */ |
| { SX9324_REG_ADV_CTRL13, 0x00, "adv_ctrl13" }, |
| { SX9324_REG_ADV_CTRL14, 0x00, "adv_ctrl14" }, |
| { SX9324_REG_ADV_CTRL15, 0x00, "adv_ctrl15" }, |
| { SX9324_REG_ADV_CTRL16, 0x00, "adv_ctrl16" }, |
| { SX9324_REG_ADV_CTRL17, 0x00, "adv_ctrl17" }, |
| { SX9324_REG_ADV_CTRL18, 0x00, "adv_ctrl18" }, |
| { SX9324_REG_ADV_CTRL19, |
| SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl19" }, |
| { SX9324_REG_ADV_CTRL20, |
| SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl20" }, |
| }; |
| |
| /* Activate all channels and perform an initial compensation. */ |
| static int sx9324_init_compensation(struct iio_dev *indio_dev) |
| { |
| struct sx_common_data *data = iio_priv(indio_dev); |
| unsigned int val; |
| int ret; |
| |
| /* run the compensation phase on all channels */ |
| ret = regmap_update_bits(data->regmap, SX9324_REG_STAT2, |
| SX9324_REG_STAT2_COMPSTAT_MASK, |
| SX9324_REG_STAT2_COMPSTAT_MASK); |
| if (ret) |
| return ret; |
| |
| return regmap_read_poll_timeout(data->regmap, SX9324_REG_STAT2, val, |
| !(val & SX9324_REG_STAT2_COMPSTAT_MASK), |
| 20000, 2000000); |
| } |
| |
| static const struct sx_common_reg_default * |
| sx9324_get_default_reg(struct device *dev, int idx, |
| struct sx_common_reg_default *reg_def) |
| { |
| static const char * const sx9324_rints[] = { "lowest", "low", "high", |
| "highest" }; |
| static const char * const sx9324_csidle[] = { "hi-z", "hi-z", "gnd", |
| "vdd" }; |
| #define SX9324_PIN_DEF "semtech,ph0-pin" |
| #define SX9324_RESOLUTION_DEF "semtech,ph01-resolution" |
| #define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength" |
| unsigned int pin_defs[SX9324_NUM_PINS]; |
| char prop[] = SX9324_PROXRAW_DEF; |
| u32 start = 0, raw = 0, pos = 0; |
| int ret, count, ph, pin; |
| |
| memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def)); |
| |
| sx_common_get_raw_register_config(dev, reg_def); |
| switch (reg_def->reg) { |
| case SX9324_REG_AFE_PH0: |
| case SX9324_REG_AFE_PH1: |
| case SX9324_REG_AFE_PH2: |
| case SX9324_REG_AFE_PH3: |
| ph = reg_def->reg - SX9324_REG_AFE_PH0; |
| snprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph); |
| |
| count = device_property_count_u32(dev, prop); |
| if (count != ARRAY_SIZE(pin_defs)) |
| break; |
| ret = device_property_read_u32_array(dev, prop, pin_defs, |
| ARRAY_SIZE(pin_defs)); |
| if (ret) |
| break; |
| |
| for (pin = 0; pin < SX9324_NUM_PINS; pin++) |
| raw |= (pin_defs[pin] << (2 * pin)) & |
| SX9324_REG_AFE_PH0_PIN_MASK(pin); |
| reg_def->def = raw; |
| break; |
| case SX9324_REG_AFE_CTRL0: |
| ret = device_property_match_property_string(dev, "semtech,cs-idle-sleep", |
| sx9324_csidle, |
| ARRAY_SIZE(sx9324_csidle)); |
| if (ret >= 0) { |
| reg_def->def &= ~SX9324_REG_AFE_CTRL0_CSIDLE_MASK; |
| reg_def->def |= ret << SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT; |
| } |
| |
| ret = device_property_match_property_string(dev, "semtech,int-comp-resistor", |
| sx9324_rints, |
| ARRAY_SIZE(sx9324_rints)); |
| if (ret >= 0) { |
| reg_def->def &= ~SX9324_REG_AFE_CTRL0_RINT_MASK; |
| reg_def->def |= ret << SX9324_REG_AFE_CTRL0_RINT_SHIFT; |
| } |
| break; |
| case SX9324_REG_AFE_CTRL4: |
| case SX9324_REG_AFE_CTRL7: |
| if (reg_def->reg == SX9324_REG_AFE_CTRL4) |
| strncpy(prop, "semtech,ph01-resolution", |
| ARRAY_SIZE(prop)); |
| else |
| strncpy(prop, "semtech,ph23-resolution", |
| ARRAY_SIZE(prop)); |
| |
| ret = device_property_read_u32(dev, prop, &raw); |
| if (ret) |
| break; |
| |
| raw = ilog2(raw) - 3; |
| |
| reg_def->def &= ~SX9324_REG_AFE_CTRL4_RESOLUTION_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL4_RESOLUTION_MASK, |
| raw); |
| break; |
| case SX9324_REG_AFE_CTRL8: |
| ret = device_property_read_u32(dev, |
| "semtech,input-precharge-resistor-ohms", |
| &raw); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9324_REG_AFE_CTRL8_RESFILTIN_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL8_RESFILTIN_MASK, |
| raw / 2000); |
| break; |
| |
| case SX9324_REG_AFE_CTRL9: |
| ret = device_property_read_u32(dev, |
| "semtech,input-analog-gain", &raw); |
| if (ret) |
| break; |
| /* |
| * The analog gain has the following setting: |
| * +---------+----------------+----------------+ |
| * | dt(raw) | physical value | register value | |
| * +---------+----------------+----------------+ |
| * | 0 | x1.247 | 6 | |
| * | 1 | x1 | 8 | |
| * | 2 | x0.768 | 11 | |
| * | 3 | x0.552 | 15 | |
| * +---------+----------------+----------------+ |
| */ |
| reg_def->def &= ~SX9324_REG_AFE_CTRL9_AGAIN_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL9_AGAIN_MASK, |
| 6 + raw * (raw + 3) / 2); |
| break; |
| |
| case SX9324_REG_ADV_CTRL5: |
| ret = device_property_read_u32(dev, "semtech,startup-sensor", |
| &start); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK, |
| start); |
| break; |
| case SX9324_REG_PROX_CTRL4: |
| ret = device_property_read_u32(dev, "semtech,avg-pos-strength", |
| &pos); |
| if (ret) |
| break; |
| |
| /* Powers of 2, except for a gap between 16 and 64 */ |
| raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3); |
| |
| reg_def->def &= ~SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK, |
| raw); |
| break; |
| case SX9324_REG_PROX_CTRL0: |
| case SX9324_REG_PROX_CTRL1: |
| if (reg_def->reg == SX9324_REG_PROX_CTRL0) |
| strncpy(prop, "semtech,ph01-proxraw-strength", |
| ARRAY_SIZE(prop)); |
| else |
| strncpy(prop, "semtech,ph23-proxraw-strength", |
| ARRAY_SIZE(prop)); |
| ret = device_property_read_u32(dev, prop, &raw); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9324_REG_PROX_CTRL0_RAWFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL0_RAWFILT_MASK, |
| raw); |
| break; |
| } |
| return reg_def; |
| } |
| |
| static int sx9324_check_whoami(struct device *dev, |
| struct iio_dev *indio_dev) |
| { |
| /* |
| * Only one sensor for this driver. Assuming the device tree |
| * is correct, just set the sensor name. |
| */ |
| indio_dev->name = "sx9324"; |
| return 0; |
| } |
| |
| static const struct sx_common_chip_info sx9324_chip_info = { |
| .reg_stat = SX9324_REG_STAT0, |
| .reg_irq_msk = SX9324_REG_IRQ_MSK, |
| .reg_enable_chan = SX9324_REG_GNRL_CTRL1, |
| .reg_reset = SX9324_REG_RESET, |
| |
| .mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK, |
| .irq_msk_offset = 3, |
| .num_channels = SX9324_NUM_CHANNELS, |
| .num_default_regs = ARRAY_SIZE(sx9324_default_regs), |
| |
| .ops = { |
| .read_prox_data = sx9324_read_prox_data, |
| .check_whoami = sx9324_check_whoami, |
| .init_compensation = sx9324_init_compensation, |
| .wait_for_sample = sx9324_wait_for_sample, |
| .get_default_reg = sx9324_get_default_reg, |
| }, |
| |
| .iio_channels = sx9324_channels, |
| .num_iio_channels = ARRAY_SIZE(sx9324_channels), |
| .iio_info = { |
| .read_raw = sx9324_read_raw, |
| .read_avail = sx9324_read_avail, |
| .read_event_value = sx9324_read_event_val, |
| .write_event_value = sx9324_write_event_val, |
| .write_raw = sx9324_write_raw, |
| .read_event_config = sx_common_read_event_config, |
| .write_event_config = sx_common_write_event_config, |
| }, |
| }; |
| |
| static int sx9324_probe(struct i2c_client *client) |
| { |
| return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config); |
| } |
| |
| static int sx9324_suspend(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| unsigned int regval; |
| int ret; |
| |
| disable_irq_nosync(data->client->irq); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, ®val); |
| |
| data->suspend_ctrl = |
| FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval); |
| |
| if (ret < 0) |
| goto out; |
| |
| /* Disable all phases, send the device to sleep. */ |
| ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static int sx9324_resume(struct device *dev) |
| { |
| struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, |
| data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL); |
| mutex_unlock(&data->mutex); |
| if (ret) |
| return ret; |
| |
| enable_irq(data->client->irq); |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume); |
| |
| static const struct acpi_device_id sx9324_acpi_match[] = { |
| { "STH9324", SX9324_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, sx9324_acpi_match); |
| |
| static const struct of_device_id sx9324_of_match[] = { |
| { .compatible = "semtech,sx9324", (void *)SX9324_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sx9324_of_match); |
| |
| static const struct i2c_device_id sx9324_id[] = { |
| { "sx9324", SX9324_WHOAMI_VALUE }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx9324_id); |
| |
| static struct i2c_driver sx9324_driver = { |
| .driver = { |
| .name = "sx9324", |
| .acpi_match_table = sx9324_acpi_match, |
| .of_match_table = sx9324_of_match, |
| .pm = pm_sleep_ptr(&sx9324_pm_ops), |
| |
| /* |
| * Lots of i2c transfers in probe + over 200 ms waiting in |
| * sx9324_init_compensation() mean a slow probe; prefer async |
| * so we don't delay boot if we're builtin to the kernel. |
| */ |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = sx9324_probe, |
| .id_table = sx9324_id, |
| }; |
| module_i2c_driver(sx9324_driver); |
| |
| MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); |
| MODULE_DESCRIPTION("Driver for Semtech SX9324 proximity sensor"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(SEMTECH_PROX); |