blob: 4fdc5328826cf178968a2208aaabc1e05b3a2b55 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx ethernet
allOf:
- $ref: ethernet-controller.yaml#
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network
Processing Engine) and the IXP4xx Queue Manager to process
the ethernet frames. It can optionally contain an MDIO bus to
talk to PHYs.
properties:
compatible:
const: intel,ixp4xx-ethernet
reg:
maxItems: 1
description: Ethernet MMIO address range
queue-rx:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the RX queue node
- description: RX queue instance to use
description: phandle to the RX queue on the NPE
queue-txready:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the TX READY queue node
- description: TX READY queue instance to use
description: phandle to the TX READY queue on the NPE
phy-mode: true
phy-handle: true
intel,npe-handle:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the NPE this ethernet instance is using
- description: the NPE instance to use
description: phandle to the NPE this ethernet instance is using
and the instance to use in the second cell
mdio:
$ref: mdio.yaml#
unevaluatedProperties: false
description: optional node for embedded MDIO controller
required:
- compatible
- reg
- queue-rx
- queue-txready
- intel,npe-handle
additionalProperties: false
examples:
- |
npe: npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
};
ethernet@c8009000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc8009000 0x1000>;
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
intel,npe-handle = <&npe 1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@c800c000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc800c000 0x1000>;
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
intel,npe-handle = <&npe 2>;
phy-mode = "rgmii";
phy-handle = <&phy2>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
};
};