blob: 6068be11dfe28ca4f0538329042dde5a793ab466 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale IMX8M IOMUX Controller
maintainers:
- Peng Fan <peng.fan@nxp.com>
description:
Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
for common binding part and usage.
properties:
compatible:
enum:
- fsl,imx8mm-iomuxc
- fsl,imx8mn-iomuxc
- fsl,imx8mp-iomuxc
- fsl,imx8mq-iomuxc
reg:
maxItems: 1
# Client device subnode's properties
patternProperties:
'grp$':
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
properties:
fsl,pins:
description:
each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>.
The last integer CONFIG is the pad setting value like pull-up on this
pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for
detailed CONFIG settings.
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description: |
"mux_reg" indicates the offset of mux register.
- description: |
"conf_reg" indicates the offset of pad configuration register.
- description: |
"input_reg" indicates the offset of select input register.
- description: |
"mux_val" indicates the mux value to be applied.
- description: |
"input_val" indicates the select input value to be applied.
- description: |
"pad_setting" indicates the pad configuration value to be
applied.
required:
- fsl,pins
additionalProperties: false
allOf:
- $ref: pinctrl.yaml#
required:
- compatible
- reg
additionalProperties: false
examples:
# Pinmux controller node
- |
iomuxc: pinctrl@30330000 {
compatible = "fsl,imx8mm-iomuxc";
reg = <0x30330000 0x10000>;
pinctrl_uart2: uart2grp {
fsl,pins =
<0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
<0x240 0x4A8 0x000 0x0 0x0 0x140>;
};
};
...