| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: MCP16502 - High-Performance PMIC |
| |
| maintainers: |
| - Andrei Simion <andrei.simion@microchip.com> |
| |
| description: |
| The MCP16502 is an optimally integrated PMIC compatible |
| with Microchip's eMPUs(Embedded Microprocessor Units), |
| requiring Dynamic Voltage Scaling (DVS) with the use |
| of High-Performance mode (HPM). |
| |
| properties: |
| compatible: |
| const: microchip,mcp16502 |
| |
| lpm-gpios: |
| maxItems: 1 |
| description: GPIO for LPM pin. |
| Note that this GPIO must remain high during |
| suspend-to-ram, keeping the PMIC into HIBERNATE mode. |
| |
| reg: |
| maxItems: 1 |
| |
| regulators: |
| type: object |
| additionalProperties: false |
| description: List of regulators and its properties. |
| |
| patternProperties: |
| "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$": |
| type: object |
| $ref: regulator.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| regulator-initial-mode: |
| enum: [2, 4] |
| default: 2 |
| description: Initial operating mode |
| |
| regulator-allowed-modes: |
| items: |
| enum: [2, 4] |
| description: Supported modes |
| 2 - FPWM higher precision, higher consumption |
| 4 - AutoPFM lower precision, lower consumption |
| |
| required: |
| - compatible |
| - reg |
| - regulators |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmic@5b { |
| compatible = "microchip,mcp16502"; |
| reg = <0x5b>; |
| |
| regulators { |
| VDD_IO { |
| regulator-name = "VDD_IO"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <2>; |
| regulator-allowed-modes = <2>, <4>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| regulator-mode = <4>; |
| }; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| regulator-mode = <4>; |
| }; |
| }; |
| |
| VDD_DDR { |
| regulator-name = "VDD_DDR"; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-initial-mode = <2>; |
| regulator-allowed-modes = <2>, <4>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| regulator-mode = <4>; |
| }; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-mode = <4>; |
| }; |
| }; |
| |
| VDD_CORE { |
| regulator-name = "VDD_CORE"; |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| regulator-initial-mode = <2>; |
| regulator-allowed-modes = <2>, <4>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| regulator-mode = <4>; |
| }; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| regulator-mode = <4>; |
| }; |
| }; |
| |
| VDD_OTHER { |
| regulator-name = "VDD_OTHER"; |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-initial-mode = <2>; |
| regulator-allowed-modes = <2>, <4>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| regulator-mode = <4>; |
| }; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| regulator-mode = <4>; |
| }; |
| }; |
| |
| LDO1 { |
| regulator-name = "LDO1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| }; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| LDO2 { |
| regulator-name = "LDO2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3700000>; |
| regulator-always-on; |
| |
| regulator-state-standby { |
| regulator-on-in-suspend; |
| }; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| }; |
| }; |
| }; |