blob: 5587069b60521758a22dd2767b528d139a1f358b [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright (C) 2018 emtrion GmbH
//
/ {
aliases {
boardid = &boardid;
mmc0 = &usdhc3;
mmc1 = &usdhc2;
mmc2 = &usdhc1;
mmc3 = &usdhc4;
};
reg_wall_5p0: reg-wall5p0 {
compatible = "regulator-fixed";
regulator-name = "Main-Supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
reg_base3p3: reg-base3p3 {
compatible = "regulator-fixed";
vin-supply = <&reg_wall_5p0>;
regulator-name = "3V3-avari";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
reg_base1p5: reg-base1p5 {
compatible = "regulator-fixed";
vin-supply = <&reg_base3p3>;
regulator-name = "1V5-avari";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
reg_usb_otg: reg-otgvbus {
compatible = "regulator-fixed";
vin-supply = <&reg_wall_5p0>;
regulator-name = "OTG_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
clk_codec: clock-codec {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12000000>;
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "emCON-avari-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&sgtl5000>;
audio-routing =
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <3>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
status = "okay";
};
&can2 {
status = "okay";
};
&ecspi2 {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
sgtl5000: audio-codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
#sound-dai-cells = <0>;
clocks = <&clk_codec>;
VDDA-supply = <&reg_base3p3>;
VDDIO-supply = <&reg_base3p3>;
};
captouch: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
interrupt-parent = <&gpio6>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
boardid: gpio@3a {
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
#gpio-cells = <2>;
};
};
&pcie {
status = "okay";
};
&rgb_encoder {
status = "okay";
};
&rgb_panel {
compatible = "edt,etm0700g0bdh6";
status = "okay";
};
&ssi2 {
status = "okay";
};
&uart2 {
status = "okay";
uart-has-rtscts;
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbh1 {
status = "okay";
};
&usbotg {
status = "okay";
};
&usdhc1 {
status = "okay";
};