blob: 999d937302406975cd3bdf93a9ce33fa8578ab3a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "bcm4906.dtsi"
/ {
compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
model = "Netgear R8000P";
memory@0 {
device_type = "memory";
reg = <0x00 0x00 0x00 0x20000000>;
};
leds {
compatible = "gpio-leds";
led-power-white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
led-power-amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
led-wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
led-2ghz {
function = "2ghz";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
led-5ghz-1 {
function = "5ghz-1";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
led-5ghz-2 {
function = "5ghz-2";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
led-usb2 {
function = "usb2";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
led-usb3 {
function = "usb3";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
linux,default-trigger = "usbport";
};
led-wifi {
function = "wifi";
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
};
};
};
&enet {
nvmem-cells = <&base_mac_addr>;
nvmem-cell-names = "mac-address";
};
&usb_phy {
brcm,ioc = <1>;
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&xhci {
status = "okay";
};
&ports {
port@0 {
label = "lan4";
};
port@1 {
label = "lan3";
};
port@2 {
label = "lan2";
};
port@3 {
label = "lan1";
};
port@7 {
reg = <7>;
phy-mode = "internal";
phy-handle = <&phy12>;
label = "wan";
};
};
&nand_controller {
brcm,wp-not-connected;
status = "okay";
};
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-on-flash-bbt;
#address-cells = <1>;
#size-cells = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "nvmem-cells";
label = "cferom";
reg = <0x0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x100000>;
base_mac_addr: mac@106a0 {
reg = <0x106a0 0x6>;
};
};
partition@100000 {
compatible = "brcm,bcm4908-firmware";
label = "firmware";
reg = <0x100000 0x4400000>;
};
};
};