| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree Include file for NXP Layerscape-1043A family SoC. |
| * |
| * Copyright 2014-2015 Freescale Semiconductor, Inc. |
| * Copyright 2018, 2020 NXP |
| * |
| * Mingkai Hu <Mingkai.hu@freescale.com> |
| */ |
| |
| #include <dt-bindings/clock/fsl,qoriq-clockgen.h> |
| #include <dt-bindings/thermal/thermal.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "fsl,ls1043a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| crypto = &crypto; |
| fman0 = &fman0; |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| ethernet4 = &enet4; |
| ethernet5 = &enet5; |
| ethernet6 = &enet6; |
| rtc1 = &ftm_alarm0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* |
| * We expect the enable-method for cpu's to be "psci", but this |
| * is dependent on the SoC FW, which will fill this in. |
| * |
| * Currently supported enable-method is psci v0.2 |
| */ |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| next-level-cache = <&l2>; |
| cpu-idle-states = <&CPU_PH20>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x1>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| next-level-cache = <&l2>; |
| cpu-idle-states = <&CPU_PH20>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x2>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| next-level-cache = <&l2>; |
| cpu-idle-states = <&CPU_PH20>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x3>; |
| clocks = <&clockgen QORIQ_CLK_CMUX 0>; |
| next-level-cache = <&l2>; |
| cpu-idle-states = <&CPU_PH20>; |
| #cooling-cells = <2>; |
| }; |
| |
| l2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| idle-states { |
| /* |
| * PSCI node is not added default, U-boot will add missing |
| * parts if it determines to use PSCI. |
| */ |
| entry-method = "psci"; |
| |
| CPU_PH20: cpu-ph20 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "PH20"; |
| arm,psci-suspend-param = <0x0>; |
| entry-latency-us = <1000>; |
| exit-latency-us = <1000>; |
| min-residency-us = <3000>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0 0x80000000>; |
| /* DRAM space 1, size: 2GiB DRAM */ |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| bman_fbpr: bman-fbpr { |
| compatible = "shared-dma-pool"; |
| size = <0 0x1000000>; |
| alignment = <0 0x1000000>; |
| no-map; |
| }; |
| |
| qman_fqd: qman-fqd { |
| compatible = "shared-dma-pool"; |
| size = <0 0x400000>; |
| alignment = <0 0x400000>; |
| no-map; |
| }; |
| |
| qman_pfdr: qman-pfdr { |
| compatible = "shared-dma-pool"; |
| size = <0 0x2000000>; |
| alignment = <0 0x2000000>; |
| no-map; |
| }; |
| }; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&dcfg>; |
| offset = <0xb0>; |
| mask = <0x02>; |
| }; |
| |
| thermal-zones { |
| ddr-controller { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 0>; |
| |
| trips { |
| ddr-ctrler-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| ddr-ctrler-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| serdes { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 1>; |
| |
| trips { |
| serdes-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| serdes-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| fman { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 2>; |
| |
| trips { |
| fman-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| fman-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| core-cluster { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 3>; |
| |
| trips { |
| core_cluster_alert: core-cluster-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| core_cluster_crit: core-cluster-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&core_cluster_alert>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| sec { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| thermal-sensors = <&tmu 4>; |
| |
| trips { |
| sec-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| sec-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0xf08>, /* Physical Secure PPI */ |
| <1 14 0xf08>, /* Physical Non-Secure PPI */ |
| <1 11 0xf08>, /* Virtual PPI */ |
| <1 10 0xf08>; /* Hypervisor PPI */ |
| fsl,erratum-a008585; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <0 106 0x4>, |
| <0 107 0x4>, |
| <0 95 0x4>, |
| <0 97 0x4>; |
| interrupt-affinity = <&cpu0>, |
| <&cpu1>, |
| <&cpu2>, |
| <&cpu3>; |
| }; |
| |
| gic: interrupt-controller@1400000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x1401000 0 0x1000>, /* GICD */ |
| <0x0 0x1402000 0 0x2000>, /* GICC */ |
| <0x0 0x1404000 0 0x2000>, /* GICH */ |
| <0x0 0x1406000 0 0x2000>; /* GICV */ |
| interrupts = <1 9 0xf08>; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; |
| dma-coherent; |
| |
| clockgen: clocking@1ee1000 { |
| compatible = "fsl,ls1043a-clockgen"; |
| reg = <0x0 0x1ee1000 0x0 0x1000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| scfg: scfg@1570000 { |
| compatible = "fsl,ls1043a-scfg", "syscon"; |
| reg = <0x0 0x1570000 0x0 0x10000>; |
| big-endian; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1570000 0x10000>; |
| |
| extirq: interrupt-controller@1ac { |
| compatible = "fsl,ls1043a-extirq"; |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x1ac 4>; |
| interrupt-map = |
| <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <0xf 0x0>; |
| }; |
| }; |
| |
| crypto: crypto@1700000 { |
| compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", |
| "fsl,sec-v4.0"; |
| fsl,sec-era = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x00 0x1700000 0x100000>; |
| reg = <0x00 0x1700000 0x0 0x100000>; |
| interrupts = <0 75 0x4>; |
| dma-coherent; |
| |
| sec_jr0: jr@10000 { |
| compatible = "fsl,sec-v5.4-job-ring", |
| "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x10000 0x10000>; |
| interrupts = <0 71 0x4>; |
| }; |
| |
| sec_jr1: jr@20000 { |
| compatible = "fsl,sec-v5.4-job-ring", |
| "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x20000 0x10000>; |
| interrupts = <0 72 0x4>; |
| }; |
| |
| sec_jr2: jr@30000 { |
| compatible = "fsl,sec-v5.4-job-ring", |
| "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x30000 0x10000>; |
| interrupts = <0 73 0x4>; |
| }; |
| |
| sec_jr3: jr@40000 { |
| compatible = "fsl,sec-v5.4-job-ring", |
| "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x40000 0x10000>; |
| interrupts = <0 74 0x4>; |
| }; |
| }; |
| |
| sfp: efuse@1e80000 { |
| compatible = "fsl,ls1021a-sfp"; |
| reg = <0x0 0x1e80000 0x0 0x10000>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(4)>; |
| clock-names = "sfp"; |
| }; |
| |
| dcfg: dcfg@1ee0000 { |
| compatible = "fsl,ls1043a-dcfg", "syscon"; |
| reg = <0x0 0x1ee0000 0x0 0x1000>; |
| big-endian; |
| }; |
| |
| ifc: memory-controller@1530000 { |
| compatible = "fsl,ifc"; |
| reg = <0x0 0x1530000 0x0 0x10000>; |
| interrupts = <0 43 0x4>; |
| }; |
| |
| qspi: spi@1550000 { |
| compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x1550000 0x0 0x10000>, |
| <0x0 0x40000000 0x0 0x4000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| interrupts = <0 99 0x4>; |
| clock-names = "qspi_en", "qspi"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| status = "disabled"; |
| }; |
| |
| esdhc: esdhc@1560000 { |
| compatible = "fsl,ls1043a-esdhc", "fsl,esdhc"; |
| reg = <0x0 0x1560000 0x0 0x10000>; |
| interrupts = <0 62 0x4>; |
| clock-frequency = <0>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| big-endian; |
| bus-width = <4>; |
| }; |
| |
| ddr: memory-controller@1080000 { |
| compatible = "fsl,qoriq-memory-controller"; |
| reg = <0x0 0x1080000 0x0 0x1000>; |
| interrupts = <0 144 0x4>; |
| big-endian; |
| }; |
| |
| tmu: tmu@1f00000 { |
| compatible = "fsl,qoriq-tmu"; |
| reg = <0x0 0x1f00000 0x0 0x10000>; |
| interrupts = <0 33 0x4>; |
| fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; |
| fsl,tmu-calibration = |
| <0x00000000 0x00000023>, |
| <0x00000001 0x0000002a>, |
| <0x00000002 0x00000031>, |
| <0x00000003 0x00000037>, |
| <0x00000004 0x0000003e>, |
| <0x00000005 0x00000044>, |
| <0x00000006 0x0000004b>, |
| <0x00000007 0x00000051>, |
| <0x00000008 0x00000058>, |
| <0x00000009 0x0000005e>, |
| <0x0000000a 0x00000065>, |
| <0x0000000b 0x0000006b>, |
| |
| <0x00010000 0x00000023>, |
| <0x00010001 0x0000002b>, |
| <0x00010002 0x00000033>, |
| <0x00010003 0x0000003b>, |
| <0x00010004 0x00000043>, |
| <0x00010005 0x0000004b>, |
| <0x00010006 0x00000054>, |
| <0x00010007 0x0000005c>, |
| <0x00010008 0x00000064>, |
| <0x00010009 0x0000006c>, |
| |
| <0x00020000 0x00000021>, |
| <0x00020001 0x0000002c>, |
| <0x00020002 0x00000036>, |
| <0x00020003 0x00000040>, |
| <0x00020004 0x0000004b>, |
| <0x00020005 0x00000055>, |
| <0x00020006 0x0000005f>, |
| |
| <0x00030000 0x00000013>, |
| <0x00030001 0x0000001d>, |
| <0x00030002 0x00000028>, |
| <0x00030003 0x00000032>, |
| <0x00030004 0x0000003d>, |
| <0x00030005 0x00000047>, |
| <0x00030006 0x00000052>, |
| <0x00030007 0x0000005c>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| qman: qman@1880000 { |
| compatible = "fsl,qman"; |
| reg = <0x0 0x1880000 0x0 0x10000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| memory-region = <&qman_fqd &qman_pfdr>; |
| }; |
| |
| bman: bman@1890000 { |
| compatible = "fsl,bman"; |
| reg = <0x0 0x1890000 0x0 0x10000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| memory-region = <&bman_fbpr>; |
| }; |
| |
| bportals: bman-portals@508000000 { |
| ranges = <0x0 0x5 0x08000000 0x8000000>; |
| }; |
| |
| qportals: qman-portals@500000000 { |
| ranges = <0x0 0x5 0x00000000 0x8000000>; |
| }; |
| |
| dspi0: spi@2100000 { |
| compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <0 64 0x4>; |
| clock-names = "dspi"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| spi-num-chipselects = <5>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@2180000 { |
| compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2180000 0x0 0x10000>; |
| interrupts = <0 56 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| dmas = <&edma0 1 38>, |
| <&edma0 1 39>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2190000 { |
| compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2190000 0x0 0x10000>; |
| interrupts = <0 57 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a0000 { |
| compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21a0000 0x0 0x10000>; |
| interrupts = <0 58 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@21b0000 { |
| compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21b0000 0x0 0x10000>; |
| interrupts = <0 59 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| }; |
| |
| duart0: serial@21c0500 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x00 0x21c0500 0x0 0x100>; |
| interrupts = <0 54 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| }; |
| |
| duart1: serial@21c0600 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x00 0x21c0600 0x0 0x100>; |
| interrupts = <0 54 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| }; |
| |
| duart2: serial@21d0500 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21d0500 0x0 0x100>; |
| interrupts = <0 55 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| }; |
| |
| duart3: serial@21d0600 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21d0600 0x0 0x100>; |
| interrupts = <0 55 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| }; |
| |
| gpio1: gpio@2300000 { |
| compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <0 66 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2310000 { |
| compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <0 67 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2320000 { |
| compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <0 68 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@2330000 { |
| compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <0 134 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| uqe: uqe@2400000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe", "simple-bus"; |
| ranges = <0x0 0x0 0x2400000 0x40000>; |
| reg = <0x0 0x2400000 0x0 0x480>; |
| brg-frequency = <100000000>; |
| bus-frequency = <200000000>; |
| fsl,qe-num-riscs = <1>; |
| fsl,qe-num-snums = <28>; |
| |
| qeic: qeic@80 { |
| compatible = "fsl,qe-ic"; |
| reg = <0x80 0x80>; |
| #address-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| si1: si@700 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,ls1043-qe-si", |
| "fsl,t1040-qe-si"; |
| reg = <0x700 0x80>; |
| }; |
| |
| siram1: siram@1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,ls1043-qe-siram", |
| "fsl,t1040-qe-siram"; |
| reg = <0x1000 0x800>; |
| }; |
| |
| ucc@2000 { |
| cell-index = <1>; |
| reg = <0x2000 0x200>; |
| interrupts = <32>; |
| interrupt-parent = <&qeic>; |
| }; |
| |
| ucc@2200 { |
| cell-index = <3>; |
| reg = <0x2200 0x200>; |
| interrupts = <34>; |
| interrupt-parent = <&qeic>; |
| }; |
| |
| muram@10000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| ranges = <0x0 0x10000 0x6000>; |
| |
| data-only@0 { |
| compatible = "fsl,qe-muram-data", |
| "fsl,cpm-muram-data"; |
| reg = <0x0 0x6000>; |
| }; |
| }; |
| }; |
| |
| lpuart0: serial@2950000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2950000 0x0 0x1000>; |
| interrupts = <0 48 0x4>; |
| clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@2960000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2960000 0x0 0x1000>; |
| interrupts = <0 49 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@2970000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2970000 0x0 0x1000>; |
| interrupts = <0 50 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@2980000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2980000 0x0 0x1000>; |
| interrupts = <0 51 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@2990000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2990000 0x0 0x1000>; |
| interrupts = <0 52 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@29a0000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x29a0000 0x0 0x1000>; |
| interrupts = <0 53 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| wdog0: watchdog@2ad0000 { |
| compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; |
| reg = <0x0 0x2ad0000 0x0 0x10000>; |
| interrupts = <0 83 0x4>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| clock-names = "wdog"; |
| big-endian; |
| }; |
| |
| edma0: dma-controller@2c00000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x0 0x2c00000 0x0 0x10000>, |
| <0x0 0x2c10000 0x0 0x10000>, |
| <0x0 0x2c20000 0x0 0x10000>; |
| interrupts = <0 103 0x4>, |
| <0 103 0x4>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| big-endian; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>, |
| <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| }; |
| |
| aux_bus: aux_bus { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| ranges; |
| dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; |
| |
| usb0: usb@2f00000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x2f00000 0x0 0x10000>; |
| interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| snps,dis_rxdet_inp3_quirk; |
| usb3-lpm-capable; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@3000000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3000000 0x0 0x10000>; |
| interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| snps,dis_rxdet_inp3_quirk; |
| usb3-lpm-capable; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| status = "disabled"; |
| }; |
| |
| usb2: usb@3100000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| snps,dis_rxdet_inp3_quirk; |
| usb3-lpm-capable; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| status = "disabled"; |
| }; |
| |
| sata: sata@3200000 { |
| compatible = "fsl,ls1043a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>, |
| <0x0 0x20140520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL |
| QORIQ_CLK_PLL_DIV(1)>; |
| dma-coherent; |
| }; |
| }; |
| |
| msi1: msi-controller1@1571000 { |
| compatible = "fsl,ls1043a-msi"; |
| reg = <0x0 0x1571000 0x0 0x8>; |
| msi-controller; |
| interrupts = <0 116 0x4>; |
| }; |
| |
| msi2: msi-controller2@1572000 { |
| compatible = "fsl,ls1043a-msi"; |
| reg = <0x0 0x1572000 0x0 0x8>; |
| msi-controller; |
| interrupts = <0 126 0x4>; |
| }; |
| |
| msi3: msi-controller3@1573000 { |
| compatible = "fsl,ls1043a-msi"; |
| reg = <0x0 0x1573000 0x0 0x8>; |
| msi-controller; |
| interrupts = <0 160 0x4>; |
| }; |
| |
| pcie1: pcie@3400000 { |
| compatible = "fsl,ls1043a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ |
| <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>, |
| <0 118 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pme", "aer"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-viewport = <6>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>, <&msi2>, <&msi3>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, |
| <0000 0 0 2 &gic 0 111 0x4>, |
| <0000 0 0 3 &gic 0 112 0x4>, |
| <0000 0 0 4 &gic 0 113 0x4>; |
| fsl,pcie-scfg = <&scfg 0>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pcie2: pcie@3500000 { |
| compatible = "fsl,ls1043a-pcie"; |
| reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ |
| <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>, |
| <0 128 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pme", "aer"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-viewport = <6>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>, <&msi2>, <&msi3>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 120 0x4>, |
| <0000 0 0 2 &gic 0 121 0x4>, |
| <0000 0 0 3 &gic 0 122 0x4>, |
| <0000 0 0 4 &gic 0 123 0x4>; |
| fsl,pcie-scfg = <&scfg 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pcie3: pcie@3600000 { |
| compatible = "fsl,ls1043a-pcie"; |
| reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ |
| <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>, |
| <0 162 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pme", "aer"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-viewport = <6>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>, <&msi2>, <&msi3>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 154 0x4>, |
| <0000 0 0 2 &gic 0 155 0x4>, |
| <0000 0 0 3 &gic 0 156 0x4>, |
| <0000 0 0 4 &gic 0 157 0x4>; |
| fsl,pcie-scfg = <&scfg 2>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| qdma: dma-controller@8380000 { |
| compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; |
| reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ |
| <0x0 0x8390000 0x0 0x10000>, /* Status regs */ |
| <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ |
| interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "qdma-error", "qdma-queue0", |
| "qdma-queue1", "qdma-queue2", "qdma-queue3"; |
| dma-channels = <8>; |
| block-number = <1>; |
| block-offset = <0x10000>; |
| fsl,dma-queues = <2>; |
| status-sizes = <64>; |
| queue-sizes = <64 64>; |
| big-endian; |
| }; |
| |
| rcpm: power-controller@1ee2140 { |
| compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+"; |
| reg = <0x0 0x1ee2140 0x0 0x4>; |
| #fsl,rcpm-wakeup-cells = <1>; |
| }; |
| |
| ftm_alarm0: timer@29d0000 { |
| compatible = "fsl,ls1043a-ftm-alarm"; |
| reg = <0x0 0x29d0000 0x0 0x10000>; |
| fsl,rcpm-wakeup = <&rcpm 0x20000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| big-endian; |
| }; |
| }; |
| |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| |
| }; |
| |
| #include "qoriq-qman-portals.dtsi" |
| #include "qoriq-bman-portals.dtsi" |
