blob: 82ce007d99592cac131cee3cfb2f5014ff56d3b4 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
*/
/dts-v1/;
#include "sparx5_pcb_common.dtsi"
/{
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
priority = <200>;
};
leds {
compatible = "gpio-leds";
led@0 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@1 {
label = "eth60:green";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@2 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@3 {
label = "eth61:green";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@4 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@5 {
label = "eth62:green";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@6 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@7 {
label = "eth63:green";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&gpio {
i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_35", "GPIO_36",
"GPIO_50", "GPIO_51";
function = "twi_scl_m";
output-low;
};
i2cmux_s29: i2cmux-0-pins {
pins = "GPIO_35";
function = "twi_scl_m";
output-high;
};
i2cmux_s30: i2cmux-1-pins {
pins = "GPIO_36";
function = "twi_scl_m";
output-high;
};
i2cmux_s31: i2cmux-2-pins {
pins = "GPIO_50";
function = "twi_scl_m";
output-high;
};
i2cmux_s32: i2cmux-3-pins {
pins = "GPIO_51";
function = "twi_scl_m";
output-high;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0>;
};
};
&spi0 {
status = "okay";
spi@0 {
compatible = "spi-mux";
mux-controls = <&mux>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
flash@9 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
};
};
};
&sgpio1 {
status = "okay";
microchip,sgpio-port-ranges = <24 31>;
gpio@0 {
ngpios = <64>;
};
gpio@1 {
ngpios = <64>;
};
};
&sgpio2 {
status = "okay";
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
};
&axi {
i2c0_imux: i2c0-imux@0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
};
&i2c0_imux {
pinctrl-names =
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
"idle";
pinctrl-0 = <&i2cmux_s29>;
pinctrl-1 = <&i2cmux_s30>;
pinctrl-2 = <&i2cmux_s31>;
pinctrl-3 = <&i2cmux_s32>;
pinctrl-4 = <&i2cmux_pins_i>;
i2c_sfp1: i2c_sfp1 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_sfp2: i2c_sfp2 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_sfp3: i2c_sfp3 {
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_sfp4: i2c_sfp4 {
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
&axi {
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
phy5: ethernet-phy@5 {
reg = <5>;
};
phy6: ethernet-phy@6 {
reg = <6>;
};
phy7: ethernet-phy@7 {
reg = <7>;
};
phy8: ethernet-phy@8 {
reg = <8>;
};
phy9: ethernet-phy@9 {
reg = <9>;
};
phy10: ethernet-phy@10 {
reg = <10>;
};
phy11: ethernet-phy@11 {
reg = <11>;
};
phy12: ethernet-phy@12 {
reg = <12>;
};
phy13: ethernet-phy@13 {
reg = <13>;
};
phy14: ethernet-phy@14 {
reg = <14>;
};
phy15: ethernet-phy@15 {
reg = <15>;
};
phy16: ethernet-phy@16 {
reg = <16>;
};
phy17: ethernet-phy@17 {
reg = <17>;
};
phy18: ethernet-phy@18 {
reg = <18>;
};
phy19: ethernet-phy@19 {
reg = <19>;
};
phy20: ethernet-phy@20 {
reg = <20>;
};
phy21: ethernet-phy@21 {
reg = <21>;
};
phy22: ethernet-phy@22 {
reg = <22>;
};
phy23: ethernet-phy@23 {
reg = <23>;
};
};
&mdio1 {
status = "okay";
phy24: ethernet-phy@24 {
reg = <0>;
};
phy25: ethernet-phy@25 {
reg = <1>;
};
phy26: ethernet-phy@26 {
reg = <2>;
};
phy27: ethernet-phy@27 {
reg = <3>;
};
phy28: ethernet-phy@28 {
reg = <4>;
};
phy29: ethernet-phy@29 {
reg = <5>;
};
phy30: ethernet-phy@30 {
reg = <6>;
};
phy31: ethernet-phy@31 {
reg = <7>;
};
phy32: ethernet-phy@32 {
reg = <8>;
};
phy33: ethernet-phy@33 {
reg = <9>;
};
phy34: ethernet-phy@34 {
reg = <10>;
};
phy35: ethernet-phy@35 {
reg = <11>;
};
phy36: ethernet-phy@36 {
reg = <12>;
};
phy37: ethernet-phy@37 {
reg = <13>;
};
phy38: ethernet-phy@38 {
reg = <14>;
};
phy39: ethernet-phy@39 {
reg = <15>;
};
phy40: ethernet-phy@40 {
reg = <16>;
};
phy41: ethernet-phy@41 {
reg = <17>;
};
phy42: ethernet-phy@42 {
reg = <18>;
};
phy43: ethernet-phy@43 {
reg = <19>;
};
phy44: ethernet-phy@44 {
reg = <20>;
};
phy45: ethernet-phy@45 {
reg = <21>;
};
phy46: ethernet-phy@46 {
reg = <22>;
};
phy47: ethernet-phy@47 {
reg = <23>;
};
};
&mdio3 {
status = "okay";
phy64: ethernet-phy@64 {
reg = <28>;
};
};
&switch {
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy0>;
phy-mode = "qsgmii";
};
port1: port@1 {
reg = <1>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy1>;
phy-mode = "qsgmii";
};
port2: port@2 {
reg = <2>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy2>;
phy-mode = "qsgmii";
};
port3: port@3 {
reg = <3>;
microchip,bandwidth = <1000>;
phys = <&serdes 13>;
phy-handle = <&phy3>;
phy-mode = "qsgmii";
};
port4: port@4 {
reg = <4>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy4>;
phy-mode = "qsgmii";
};
port5: port@5 {
reg = <5>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy5>;
phy-mode = "qsgmii";
};
port6: port@6 {
reg = <6>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy6>;
phy-mode = "qsgmii";
};
port7: port@7 {
reg = <7>;
microchip,bandwidth = <1000>;
phys = <&serdes 14>;
phy-handle = <&phy7>;
phy-mode = "qsgmii";
};
port8: port@8 {
reg = <8>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy8>;
phy-mode = "qsgmii";
};
port9: port@9 {
reg = <9>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy9>;
phy-mode = "qsgmii";
};
port10: port@10 {
reg = <10>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy10>;
phy-mode = "qsgmii";
};
port11: port@11 {
reg = <11>;
microchip,bandwidth = <1000>;
phys = <&serdes 15>;
phy-handle = <&phy11>;
phy-mode = "qsgmii";
};
port12: port@12 {
reg = <12>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy12>;
phy-mode = "qsgmii";
};
port13: port@13 {
reg = <13>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy13>;
phy-mode = "qsgmii";
};
port14: port@14 {
reg = <14>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy14>;
phy-mode = "qsgmii";
};
port15: port@15 {
reg = <15>;
microchip,bandwidth = <1000>;
phys = <&serdes 16>;
phy-handle = <&phy15>;
phy-mode = "qsgmii";
};
port16: port@16 {
reg = <16>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy16>;
phy-mode = "qsgmii";
};
port17: port@17 {
reg = <17>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy17>;
phy-mode = "qsgmii";
};
port18: port@18 {
reg = <18>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy18>;
phy-mode = "qsgmii";
};
port19: port@19 {
reg = <19>;
microchip,bandwidth = <1000>;
phys = <&serdes 17>;
phy-handle = <&phy19>;
phy-mode = "qsgmii";
};
port20: port@20 {
reg = <20>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy20>;
phy-mode = "qsgmii";
};
port21: port@21 {
reg = <21>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy21>;
phy-mode = "qsgmii";
};
port22: port@22 {
reg = <22>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy22>;
phy-mode = "qsgmii";
};
port23: port@23 {
reg = <23>;
microchip,bandwidth = <1000>;
phys = <&serdes 18>;
phy-handle = <&phy23>;
phy-mode = "qsgmii";
};
port24: port@24 {
reg = <24>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy24>;
phy-mode = "qsgmii";
};
port25: port@25 {
reg = <25>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy25>;
phy-mode = "qsgmii";
};
port26: port@26 {
reg = <26>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy26>;
phy-mode = "qsgmii";
};
port27: port@27 {
reg = <27>;
microchip,bandwidth = <1000>;
phys = <&serdes 19>;
phy-handle = <&phy27>;
phy-mode = "qsgmii";
};
port28: port@28 {
reg = <28>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy28>;
phy-mode = "qsgmii";
};
port29: port@29 {
reg = <29>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy29>;
phy-mode = "qsgmii";
};
port30: port@30 {
reg = <30>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy30>;
phy-mode = "qsgmii";
};
port31: port@31 {
reg = <31>;
microchip,bandwidth = <1000>;
phys = <&serdes 20>;
phy-handle = <&phy31>;
phy-mode = "qsgmii";
};
port32: port@32 {
reg = <32>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy32>;
phy-mode = "qsgmii";
};
port33: port@33 {
reg = <33>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy33>;
phy-mode = "qsgmii";
};
port34: port@34 {
reg = <34>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy34>;
phy-mode = "qsgmii";
};
port35: port@35 {
reg = <35>;
microchip,bandwidth = <1000>;
phys = <&serdes 21>;
phy-handle = <&phy35>;
phy-mode = "qsgmii";
};
port36: port@36 {
reg = <36>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy36>;
phy-mode = "qsgmii";
};
port37: port@37 {
reg = <37>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy37>;
phy-mode = "qsgmii";
};
port38: port@38 {
reg = <38>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy38>;
phy-mode = "qsgmii";
};
port39: port@39 {
reg = <39>;
microchip,bandwidth = <1000>;
phys = <&serdes 22>;
phy-handle = <&phy39>;
phy-mode = "qsgmii";
};
port40: port@40 {
reg = <40>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy40>;
phy-mode = "qsgmii";
};
port41: port@41 {
reg = <41>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy41>;
phy-mode = "qsgmii";
};
port42: port@42 {
reg = <42>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy42>;
phy-mode = "qsgmii";
};
port43: port@43 {
reg = <43>;
microchip,bandwidth = <1000>;
phys = <&serdes 23>;
phy-handle = <&phy43>;
phy-mode = "qsgmii";
};
port44: port@44 {
reg = <44>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy44>;
phy-mode = "qsgmii";
};
port45: port@45 {
reg = <45>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy45>;
phy-mode = "qsgmii";
};
port46: port@46 {
reg = <46>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy46>;
phy-mode = "qsgmii";
};
port47: port@47 {
reg = <47>;
microchip,bandwidth = <1000>;
phys = <&serdes 24>;
phy-handle = <&phy47>;
phy-mode = "qsgmii";
};
/* Then the 25G interfaces */
port60: port@60 {
reg = <60>;
microchip,bandwidth = <25000>;
phys = <&serdes 29>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth60>;
managed = "in-band-status";
};
port61: port@61 {
reg = <61>;
microchip,bandwidth = <25000>;
phys = <&serdes 30>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth61>;
managed = "in-band-status";
};
port62: port@62 {
reg = <62>;
microchip,bandwidth = <25000>;
phys = <&serdes 31>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth62>;
managed = "in-band-status";
};
port63: port@63 {
reg = <63>;
microchip,bandwidth = <25000>;
phys = <&serdes 32>;
phy-mode = "10gbase-r";
sfp = <&sfp_eth63>;
managed = "in-band-status";
};
/* Finally the Management interface */
port64: port@64 {
reg = <64>;
microchip,bandwidth = <1000>;
phys = <&serdes 0>;
phy-handle = <&phy64>;
phy-mode = "sgmii";
};
};
};