| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Broadcom tag support |
| * |
| * Copyright (C) 2014 Broadcom Corporation |
| */ |
| |
| #include <linux/dsa/brcm.h> |
| #include <linux/etherdevice.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| |
| #include "dsa_priv.h" |
| |
| /* Legacy Broadcom tag (6 bytes) */ |
| #define BRCM_LEG_TAG_LEN 6 |
| |
| /* Type fields */ |
| /* 1st byte in the tag */ |
| #define BRCM_LEG_TYPE_HI 0x88 |
| /* 2nd byte in the tag */ |
| #define BRCM_LEG_TYPE_LO 0x74 |
| |
| /* Tag fields */ |
| /* 3rd byte in the tag */ |
| #define BRCM_LEG_UNICAST (0 << 5) |
| #define BRCM_LEG_MULTICAST (1 << 5) |
| #define BRCM_LEG_EGRESS (2 << 5) |
| #define BRCM_LEG_INGRESS (3 << 5) |
| |
| /* 6th byte in the tag */ |
| #define BRCM_LEG_PORT_ID (0xf) |
| |
| /* Newer Broadcom tag (4 bytes) */ |
| #define BRCM_TAG_LEN 4 |
| |
| /* Tag is constructed and desconstructed using byte by byte access |
| * because the tag is placed after the MAC Source Address, which does |
| * not make it 4-bytes aligned, so this might cause unaligned accesses |
| * on most systems where this is used. |
| */ |
| |
| /* Ingress and egress opcodes */ |
| #define BRCM_OPCODE_SHIFT 5 |
| #define BRCM_OPCODE_MASK 0x7 |
| |
| /* Ingress fields */ |
| /* 1st byte in the tag */ |
| #define BRCM_IG_TC_SHIFT 2 |
| #define BRCM_IG_TC_MASK 0x7 |
| /* 2nd byte in the tag */ |
| #define BRCM_IG_TE_MASK 0x3 |
| #define BRCM_IG_TS_SHIFT 7 |
| /* 3rd byte in the tag */ |
| #define BRCM_IG_DSTMAP2_MASK 1 |
| #define BRCM_IG_DSTMAP1_MASK 0xff |
| |
| /* Egress fields */ |
| |
| /* 2nd byte in the tag */ |
| #define BRCM_EG_CID_MASK 0xff |
| |
| /* 3rd byte in the tag */ |
| #define BRCM_EG_RC_MASK 0xff |
| #define BRCM_EG_RC_RSVD (3 << 6) |
| #define BRCM_EG_RC_EXCEPTION (1 << 5) |
| #define BRCM_EG_RC_PROT_SNOOP (1 << 4) |
| #define BRCM_EG_RC_PROT_TERM (1 << 3) |
| #define BRCM_EG_RC_SWITCH (1 << 2) |
| #define BRCM_EG_RC_MAC_LEARN (1 << 1) |
| #define BRCM_EG_RC_MIRROR (1 << 0) |
| #define BRCM_EG_TC_SHIFT 5 |
| #define BRCM_EG_TC_MASK 0x7 |
| #define BRCM_EG_PID_MASK 0x1f |
| |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM) || \ |
| IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND) |
| |
| static struct sk_buff *brcm_tag_xmit_ll(struct sk_buff *skb, |
| struct net_device *dev, |
| unsigned int offset) |
| { |
| struct dsa_port *dp = dsa_slave_to_port(dev); |
| u16 queue = skb_get_queue_mapping(skb); |
| u8 *brcm_tag; |
| |
| /* The Ethernet switch we are interfaced with needs packets to be at |
| * least 64 bytes (including FCS) otherwise they will be discarded when |
| * they enter the switch port logic. When Broadcom tags are enabled, we |
| * need to make sure that packets are at least 68 bytes |
| * (including FCS and tag) because the length verification is done after |
| * the Broadcom tag is stripped off the ingress packet. |
| * |
| * Let dsa_slave_xmit() free the SKB |
| */ |
| if (__skb_put_padto(skb, ETH_ZLEN + BRCM_TAG_LEN, false)) |
| return NULL; |
| |
| skb_push(skb, BRCM_TAG_LEN); |
| |
| if (offset) |
| memmove(skb->data, skb->data + BRCM_TAG_LEN, offset); |
| |
| brcm_tag = skb->data + offset; |
| |
| /* Set the ingress opcode, traffic class, tag enforcment is |
| * deprecated |
| */ |
| brcm_tag[0] = (1 << BRCM_OPCODE_SHIFT) | |
| ((queue & BRCM_IG_TC_MASK) << BRCM_IG_TC_SHIFT); |
| brcm_tag[1] = 0; |
| brcm_tag[2] = 0; |
| if (dp->index == 8) |
| brcm_tag[2] = BRCM_IG_DSTMAP2_MASK; |
| brcm_tag[3] = (1 << dp->index) & BRCM_IG_DSTMAP1_MASK; |
| |
| /* Now tell the master network device about the desired output queue |
| * as well |
| */ |
| skb_set_queue_mapping(skb, BRCM_TAG_SET_PORT_QUEUE(dp->index, queue)); |
| |
| return skb; |
| } |
| |
| /* Frames with this tag have one of these two layouts: |
| * ----------------------------------- |
| * | MAC DA | MAC SA | 4b tag | Type | DSA_TAG_PROTO_BRCM |
| * ----------------------------------- |
| * ----------------------------------- |
| * | 4b tag | MAC DA | MAC SA | Type | DSA_TAG_PROTO_BRCM_PREPEND |
| * ----------------------------------- |
| * In both cases, at receive time, skb->data points 2 bytes before the actual |
| * Ethernet type field and we have an offset of 4bytes between where skb->data |
| * and where the payload starts. So the same low-level receive function can be |
| * used. |
| */ |
| static struct sk_buff *brcm_tag_rcv_ll(struct sk_buff *skb, |
| struct net_device *dev, |
| struct packet_type *pt, |
| unsigned int offset) |
| { |
| int source_port; |
| u8 *brcm_tag; |
| |
| if (unlikely(!pskb_may_pull(skb, BRCM_TAG_LEN))) |
| return NULL; |
| |
| brcm_tag = skb->data - offset; |
| |
| /* The opcode should never be different than 0b000 */ |
| if (unlikely((brcm_tag[0] >> BRCM_OPCODE_SHIFT) & BRCM_OPCODE_MASK)) |
| return NULL; |
| |
| /* We should never see a reserved reason code without knowing how to |
| * handle it |
| */ |
| if (unlikely(brcm_tag[2] & BRCM_EG_RC_RSVD)) |
| return NULL; |
| |
| /* Locate which port this is coming from */ |
| source_port = brcm_tag[3] & BRCM_EG_PID_MASK; |
| |
| skb->dev = dsa_master_find_slave(dev, 0, source_port); |
| if (!skb->dev) |
| return NULL; |
| |
| /* Remove Broadcom tag and update checksum */ |
| skb_pull_rcsum(skb, BRCM_TAG_LEN); |
| |
| skb->offload_fwd_mark = 1; |
| |
| return skb; |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM) |
| static struct sk_buff *brcm_tag_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| /* Build the tag after the MAC Source Address */ |
| return brcm_tag_xmit_ll(skb, dev, 2 * ETH_ALEN); |
| } |
| |
| |
| static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev, |
| struct packet_type *pt) |
| { |
| struct sk_buff *nskb; |
| |
| /* skb->data points to the EtherType, the tag is right before it */ |
| nskb = brcm_tag_rcv_ll(skb, dev, pt, 2); |
| if (!nskb) |
| return nskb; |
| |
| /* Move the Ethernet DA and SA */ |
| memmove(nskb->data - ETH_HLEN, |
| nskb->data - ETH_HLEN - BRCM_TAG_LEN, |
| 2 * ETH_ALEN); |
| |
| return nskb; |
| } |
| |
| static const struct dsa_device_ops brcm_netdev_ops = { |
| .name = "brcm", |
| .proto = DSA_TAG_PROTO_BRCM, |
| .xmit = brcm_tag_xmit, |
| .rcv = brcm_tag_rcv, |
| .needed_headroom = BRCM_TAG_LEN, |
| }; |
| |
| DSA_TAG_DRIVER(brcm_netdev_ops); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) |
| static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct dsa_port *dp = dsa_slave_to_port(dev); |
| u8 *brcm_tag; |
| |
| /* The Ethernet switch we are interfaced with needs packets to be at |
| * least 64 bytes (including FCS) otherwise they will be discarded when |
| * they enter the switch port logic. When Broadcom tags are enabled, we |
| * need to make sure that packets are at least 70 bytes |
| * (including FCS and tag) because the length verification is done after |
| * the Broadcom tag is stripped off the ingress packet. |
| * |
| * Let dsa_slave_xmit() free the SKB |
| */ |
| if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false)) |
| return NULL; |
| |
| skb_push(skb, BRCM_LEG_TAG_LEN); |
| |
| memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN); |
| |
| brcm_tag = skb->data + 2 * ETH_ALEN; |
| |
| /* Broadcom tag type */ |
| brcm_tag[0] = BRCM_LEG_TYPE_HI; |
| brcm_tag[1] = BRCM_LEG_TYPE_LO; |
| |
| /* Broadcom tag value */ |
| brcm_tag[2] = BRCM_LEG_EGRESS; |
| brcm_tag[3] = 0; |
| brcm_tag[4] = 0; |
| brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID; |
| |
| return skb; |
| } |
| |
| static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb, |
| struct net_device *dev, |
| struct packet_type *pt) |
| { |
| int source_port; |
| u8 *brcm_tag; |
| |
| if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID))) |
| return NULL; |
| |
| brcm_tag = skb->data - 2; |
| |
| source_port = brcm_tag[5] & BRCM_LEG_PORT_ID; |
| |
| skb->dev = dsa_master_find_slave(dev, 0, source_port); |
| if (!skb->dev) |
| return NULL; |
| |
| /* Remove Broadcom tag and update checksum */ |
| skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN); |
| |
| skb->offload_fwd_mark = 1; |
| |
| /* Move the Ethernet DA and SA */ |
| memmove(skb->data - ETH_HLEN, |
| skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN, |
| 2 * ETH_ALEN); |
| |
| return skb; |
| } |
| |
| static const struct dsa_device_ops brcm_legacy_netdev_ops = { |
| .name = "brcm-legacy", |
| .proto = DSA_TAG_PROTO_BRCM_LEGACY, |
| .xmit = brcm_leg_tag_xmit, |
| .rcv = brcm_leg_tag_rcv, |
| .needed_headroom = BRCM_LEG_TAG_LEN, |
| }; |
| |
| DSA_TAG_DRIVER(brcm_legacy_netdev_ops); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY); |
| #endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */ |
| |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND) |
| static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| /* tag is prepended to the packet */ |
| return brcm_tag_xmit_ll(skb, dev, 0); |
| } |
| |
| static struct sk_buff *brcm_tag_rcv_prepend(struct sk_buff *skb, |
| struct net_device *dev, |
| struct packet_type *pt) |
| { |
| /* tag is prepended to the packet */ |
| return brcm_tag_rcv_ll(skb, dev, pt, ETH_HLEN); |
| } |
| |
| static const struct dsa_device_ops brcm_prepend_netdev_ops = { |
| .name = "brcm-prepend", |
| .proto = DSA_TAG_PROTO_BRCM_PREPEND, |
| .xmit = brcm_tag_xmit_prepend, |
| .rcv = brcm_tag_rcv_prepend, |
| .needed_headroom = BRCM_TAG_LEN, |
| }; |
| |
| DSA_TAG_DRIVER(brcm_prepend_netdev_ops); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_PREPEND); |
| #endif |
| |
| static struct dsa_tag_driver *dsa_tag_driver_array[] = { |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM) |
| &DSA_TAG_DRIVER_NAME(brcm_netdev_ops), |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY) |
| &DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops), |
| #endif |
| #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND) |
| &DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops), |
| #endif |
| }; |
| |
| module_dsa_tag_drivers(dsa_tag_driver_array); |
| |
| MODULE_LICENSE("GPL"); |