| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DAMON-based page reclamation |
| * |
| * Author: SeongJae Park <sj@kernel.org> |
| */ |
| |
| #define pr_fmt(fmt) "damon-reclaim: " fmt |
| |
| #include <linux/damon.h> |
| #include <linux/kstrtox.h> |
| #include <linux/module.h> |
| |
| #include "modules-common.h" |
| |
| #ifdef MODULE_PARAM_PREFIX |
| #undef MODULE_PARAM_PREFIX |
| #endif |
| #define MODULE_PARAM_PREFIX "damon_reclaim." |
| |
| /* |
| * Enable or disable DAMON_RECLAIM. |
| * |
| * You can enable DAMON_RCLAIM by setting the value of this parameter as ``Y``. |
| * Setting it as ``N`` disables DAMON_RECLAIM. Note that DAMON_RECLAIM could |
| * do no real monitoring and reclamation due to the watermarks-based activation |
| * condition. Refer to below descriptions for the watermarks parameter for |
| * this. |
| */ |
| static bool enabled __read_mostly; |
| |
| /* |
| * Make DAMON_RECLAIM reads the input parameters again, except ``enabled``. |
| * |
| * Input parameters that updated while DAMON_RECLAIM is running are not applied |
| * by default. Once this parameter is set as ``Y``, DAMON_RECLAIM reads values |
| * of parametrs except ``enabled`` again. Once the re-reading is done, this |
| * parameter is set as ``N``. If invalid parameters are found while the |
| * re-reading, DAMON_RECLAIM will be disabled. |
| */ |
| static bool commit_inputs __read_mostly; |
| module_param(commit_inputs, bool, 0600); |
| |
| /* |
| * Time threshold for cold memory regions identification in microseconds. |
| * |
| * If a memory region is not accessed for this or longer time, DAMON_RECLAIM |
| * identifies the region as cold, and reclaims. 120 seconds by default. |
| */ |
| static unsigned long min_age __read_mostly = 120000000; |
| module_param(min_age, ulong, 0600); |
| |
| static struct damos_quota damon_reclaim_quota = { |
| /* use up to 10 ms time, reclaim up to 128 MiB per 1 sec by default */ |
| .ms = 10, |
| .sz = 128 * 1024 * 1024, |
| .reset_interval = 1000, |
| /* Within the quota, page out older regions first. */ |
| .weight_sz = 0, |
| .weight_nr_accesses = 0, |
| .weight_age = 1 |
| }; |
| DEFINE_DAMON_MODULES_DAMOS_QUOTAS(damon_reclaim_quota); |
| |
| /* |
| * Desired level of memory pressure-stall time in microseconds. |
| * |
| * While keeping the caps that set by other quotas, DAMON_RECLAIM automatically |
| * increases and decreases the effective level of the quota aiming this level of |
| * memory pressure is incurred. System-wide ``some`` memory PSI in microseconds |
| * per quota reset interval (``quota_reset_interval_ms``) is collected and |
| * compared to this value to see if the aim is satisfied. Value zero means |
| * disabling this auto-tuning feature. |
| * |
| * Disabled by default. |
| */ |
| static unsigned long quota_mem_pressure_us __read_mostly; |
| module_param(quota_mem_pressure_us, ulong, 0600); |
| |
| /* |
| * User-specifiable feedback for auto-tuning of the effective quota. |
| * |
| * While keeping the caps that set by other quotas, DAMON_RECLAIM automatically |
| * increases and decreases the effective level of the quota aiming receiving this |
| * feedback of value ``10,000`` from the user. DAMON_RECLAIM assumes the feedback |
| * value and the quota are positively proportional. Value zero means disabling |
| * this auto-tuning feature. |
| * |
| * Disabled by default. |
| * |
| */ |
| static unsigned long quota_autotune_feedback __read_mostly; |
| module_param(quota_autotune_feedback, ulong, 0600); |
| |
| static struct damos_watermarks damon_reclaim_wmarks = { |
| .metric = DAMOS_WMARK_FREE_MEM_RATE, |
| .interval = 5000000, /* 5 seconds */ |
| .high = 500, /* 50 percent */ |
| .mid = 400, /* 40 percent */ |
| .low = 200, /* 20 percent */ |
| }; |
| DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_reclaim_wmarks); |
| |
| static struct damon_attrs damon_reclaim_mon_attrs = { |
| .sample_interval = 5000, /* 5 ms */ |
| .aggr_interval = 100000, /* 100 ms */ |
| .ops_update_interval = 0, |
| .min_nr_regions = 10, |
| .max_nr_regions = 1000, |
| }; |
| DEFINE_DAMON_MODULES_MON_ATTRS_PARAMS(damon_reclaim_mon_attrs); |
| |
| /* |
| * Start of the target memory region in physical address. |
| * |
| * The start physical address of memory region that DAMON_RECLAIM will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_start __read_mostly; |
| module_param(monitor_region_start, ulong, 0600); |
| |
| /* |
| * End of the target memory region in physical address. |
| * |
| * The end physical address of memory region that DAMON_RECLAIM will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_end __read_mostly; |
| module_param(monitor_region_end, ulong, 0600); |
| |
| /* |
| * Skip anonymous pages reclamation. |
| * |
| * If this parameter is set as ``Y``, DAMON_RECLAIM does not reclaim anonymous |
| * pages. By default, ``N``. |
| */ |
| static bool skip_anon __read_mostly; |
| module_param(skip_anon, bool, 0600); |
| |
| /* |
| * PID of the DAMON thread |
| * |
| * If DAMON_RECLAIM is enabled, this becomes the PID of the worker thread. |
| * Else, -1. |
| */ |
| static int kdamond_pid __read_mostly = -1; |
| module_param(kdamond_pid, int, 0400); |
| |
| static struct damos_stat damon_reclaim_stat; |
| DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_reclaim_stat, |
| reclaim_tried_regions, reclaimed_regions, quota_exceeds); |
| |
| static struct damon_ctx *ctx; |
| static struct damon_target *target; |
| |
| static struct damos *damon_reclaim_new_scheme(void) |
| { |
| struct damos_access_pattern pattern = { |
| /* Find regions having PAGE_SIZE or larger size */ |
| .min_sz_region = PAGE_SIZE, |
| .max_sz_region = ULONG_MAX, |
| /* and not accessed at all */ |
| .min_nr_accesses = 0, |
| .max_nr_accesses = 0, |
| /* for min_age or more micro-seconds */ |
| .min_age_region = min_age / |
| damon_reclaim_mon_attrs.aggr_interval, |
| .max_age_region = UINT_MAX, |
| }; |
| |
| return damon_new_scheme( |
| &pattern, |
| /* page out those, as soon as found */ |
| DAMOS_PAGEOUT, |
| /* for each aggregation interval */ |
| 0, |
| /* under the quota. */ |
| &damon_reclaim_quota, |
| /* (De)activate this according to the watermarks. */ |
| &damon_reclaim_wmarks); |
| } |
| |
| static void damon_reclaim_copy_quota_status(struct damos_quota *dst, |
| struct damos_quota *src) |
| { |
| dst->total_charged_sz = src->total_charged_sz; |
| dst->total_charged_ns = src->total_charged_ns; |
| dst->charged_sz = src->charged_sz; |
| dst->charged_from = src->charged_from; |
| dst->charge_target_from = src->charge_target_from; |
| dst->charge_addr_from = src->charge_addr_from; |
| dst->esz_bp = src->esz_bp; |
| } |
| |
| static int damon_reclaim_apply_parameters(void) |
| { |
| struct damos *scheme, *old_scheme; |
| struct damos_quota_goal *goal; |
| struct damos_filter *filter; |
| int err = 0; |
| |
| err = damon_set_attrs(ctx, &damon_reclaim_mon_attrs); |
| if (err) |
| return err; |
| |
| /* Will be freed by next 'damon_set_schemes()' below */ |
| scheme = damon_reclaim_new_scheme(); |
| if (!scheme) |
| return -ENOMEM; |
| if (!list_empty(&ctx->schemes)) { |
| damon_for_each_scheme(old_scheme, ctx) |
| damon_reclaim_copy_quota_status(&scheme->quota, |
| &old_scheme->quota); |
| } |
| |
| if (quota_mem_pressure_us) { |
| goal = damos_new_quota_goal(DAMOS_QUOTA_SOME_MEM_PSI_US, |
| quota_mem_pressure_us); |
| if (!goal) { |
| damon_destroy_scheme(scheme); |
| return -ENOMEM; |
| } |
| damos_add_quota_goal(&scheme->quota, goal); |
| } |
| |
| if (quota_autotune_feedback) { |
| goal = damos_new_quota_goal(DAMOS_QUOTA_USER_INPUT, 10000); |
| if (!goal) { |
| damon_destroy_scheme(scheme); |
| return -ENOMEM; |
| } |
| goal->current_value = quota_autotune_feedback; |
| damos_add_quota_goal(&scheme->quota, goal); |
| } |
| |
| if (skip_anon) { |
| filter = damos_new_filter(DAMOS_FILTER_TYPE_ANON, true); |
| if (!filter) { |
| /* Will be freed by next 'damon_set_schemes()' below */ |
| damon_destroy_scheme(scheme); |
| return -ENOMEM; |
| } |
| damos_add_filter(scheme, filter); |
| } |
| damon_set_schemes(ctx, &scheme, 1); |
| |
| return damon_set_region_biggest_system_ram_default(target, |
| &monitor_region_start, |
| &monitor_region_end); |
| } |
| |
| static int damon_reclaim_turn(bool on) |
| { |
| int err; |
| |
| if (!on) { |
| err = damon_stop(&ctx, 1); |
| if (!err) |
| kdamond_pid = -1; |
| return err; |
| } |
| |
| err = damon_reclaim_apply_parameters(); |
| if (err) |
| return err; |
| |
| err = damon_start(&ctx, 1, true); |
| if (err) |
| return err; |
| kdamond_pid = ctx->kdamond->pid; |
| return 0; |
| } |
| |
| static int damon_reclaim_enabled_store(const char *val, |
| const struct kernel_param *kp) |
| { |
| bool is_enabled = enabled; |
| bool enable; |
| int err; |
| |
| err = kstrtobool(val, &enable); |
| if (err) |
| return err; |
| |
| if (is_enabled == enable) |
| return 0; |
| |
| /* Called before init function. The function will handle this. */ |
| if (!ctx) |
| goto set_param_out; |
| |
| err = damon_reclaim_turn(enable); |
| if (err) |
| return err; |
| |
| set_param_out: |
| enabled = enable; |
| return err; |
| } |
| |
| static const struct kernel_param_ops enabled_param_ops = { |
| .set = damon_reclaim_enabled_store, |
| .get = param_get_bool, |
| }; |
| |
| module_param_cb(enabled, &enabled_param_ops, &enabled, 0600); |
| MODULE_PARM_DESC(enabled, |
| "Enable or disable DAMON_RECLAIM (default: disabled)"); |
| |
| static int damon_reclaim_handle_commit_inputs(void) |
| { |
| int err; |
| |
| if (!commit_inputs) |
| return 0; |
| |
| err = damon_reclaim_apply_parameters(); |
| commit_inputs = false; |
| return err; |
| } |
| |
| static int damon_reclaim_after_aggregation(struct damon_ctx *c) |
| { |
| struct damos *s; |
| |
| /* update the stats parameter */ |
| damon_for_each_scheme(s, c) |
| damon_reclaim_stat = s->stat; |
| |
| return damon_reclaim_handle_commit_inputs(); |
| } |
| |
| static int damon_reclaim_after_wmarks_check(struct damon_ctx *c) |
| { |
| return damon_reclaim_handle_commit_inputs(); |
| } |
| |
| static int __init damon_reclaim_init(void) |
| { |
| int err = damon_modules_new_paddr_ctx_target(&ctx, &target); |
| |
| if (err) |
| return err; |
| |
| ctx->callback.after_wmarks_check = damon_reclaim_after_wmarks_check; |
| ctx->callback.after_aggregation = damon_reclaim_after_aggregation; |
| |
| /* 'enabled' has set before this function, probably via command line */ |
| if (enabled) |
| err = damon_reclaim_turn(true); |
| |
| return err; |
| } |
| |
| module_init(damon_reclaim_init); |