if (BF538 || BF539) | |
source "arch/blackfin/mach-bf538/boards/Kconfig" | |
menu "BF538 Specific Configuration" | |
comment "Interrupt Priority Assignment" | |
menu "Priority" | |
config IRQ_PLL_WAKEUP | |
int "IRQ_PLL_WAKEUP" | |
default 7 | |
config IRQ_DMA0_ERROR | |
int "IRQ_DMA0_ERROR" | |
default 7 | |
config IRQ_PPI_ERROR | |
int "IRQ_PPI_ERROR" | |
default 7 | |
config IRQ_SPORT0_ERROR | |
int "IRQ_SPORT0_ERROR" | |
default 7 | |
config IRQ_SPORT1_ERROR | |
int "IRQ_SPORT1_ERROR" | |
default 7 | |
config IRQ_SPI0_ERROR | |
int "IRQ_SPI0_ERROR" | |
default 7 | |
config IRQ_UART0_ERROR | |
int "IRQ_UART0_ERROR" | |
default 7 | |
config IRQ_RTC | |
int "IRQ_RTC" | |
default 8 | |
config IRQ_PPI | |
int "IRQ_PPI" | |
default 8 | |
config IRQ_SPORT0_RX | |
int "IRQ_SPORT0_RX" | |
default 9 | |
config IRQ_SPORT0_TX | |
int "IRQ_SPORT0_TX" | |
default 9 | |
config IRQ_SPORT1_RX | |
int "IRQ_SPORT1_RX" | |
default 9 | |
config IRQ_SPORT1_TX | |
int "IRQ_SPORT1_TX" | |
default 9 | |
config IRQ_SPI0 | |
int "IRQ_SPI0" | |
default 10 | |
config IRQ_UART0_RX | |
int "IRQ_UART0_RX" | |
default 10 | |
config IRQ_UART0_TX | |
int "IRQ_UART0_TX" | |
default 10 | |
config IRQ_TIMER0 | |
int "IRQ_TIMER0" | |
default 7 if TICKSOURCE_GPTMR0 | |
default 8 | |
config IRQ_TIMER1 | |
int "IRQ_TIMER1" | |
default 11 | |
config IRQ_TIMER2 | |
int "IRQ_TIMER2" | |
default 11 | |
config IRQ_PORTF_INTA | |
int "IRQ_PORTF_INTA" | |
default 12 | |
config IRQ_PORTF_INTB | |
int "IRQ_PORTF_INTB" | |
default 12 | |
config IRQ_MEM0_DMA0 | |
int "IRQ_MEM0_DMA0" | |
default 13 | |
config IRQ_MEM0_DMA1 | |
int "IRQ_MEM0_DMA1" | |
default 13 | |
config IRQ_WATCH | |
int "IRQ_WATCH" | |
default 13 | |
config IRQ_DMA1_ERROR | |
int "IRQ_DMA1_ERROR" | |
default 7 | |
config IRQ_SPORT2_ERROR | |
int "IRQ_SPORT2_ERROR" | |
default 7 | |
config IRQ_SPORT3_ERROR | |
int "IRQ_SPORT3_ERROR" | |
default 7 | |
config IRQ_SPI1_ERROR | |
int "IRQ_SPI1_ERROR" | |
default 7 | |
config IRQ_SPI2_ERROR | |
int "IRQ_SPI2_ERROR" | |
default 7 | |
config IRQ_UART1_ERROR | |
int "IRQ_UART1_ERROR" | |
default 7 | |
config IRQ_UART2_ERROR | |
int "IRQ_UART2_ERROR" | |
default 7 | |
config IRQ_CAN_ERROR | |
int "IRQ_CAN_ERROR" | |
default 7 | |
config IRQ_SPORT2_RX | |
int "IRQ_SPORT2_RX" | |
default 9 | |
config IRQ_SPORT2_TX | |
int "IRQ_SPORT2_TX" | |
default 9 | |
config IRQ_SPORT3_RX | |
int "IRQ_SPORT3_RX" | |
default 9 | |
config IRQ_SPORT3_TX | |
int "IRQ_SPORT3_TX" | |
default 9 | |
config IRQ_SPI1 | |
int "IRQ_SPI1" | |
default 10 | |
config IRQ_SPI2 | |
int "IRQ_SPI2" | |
default 10 | |
config IRQ_UART1_RX | |
int "IRQ_UART1_RX" | |
default 10 | |
config IRQ_UART1_TX | |
int "IRQ_UART1_TX" | |
default 10 | |
config IRQ_UART2_RX | |
int "IRQ_UART2_RX" | |
default 10 | |
config IRQ_UART2_TX | |
int "IRQ_UART2_TX" | |
default 10 | |
config IRQ_TWI0 | |
int "IRQ_TWI0" | |
default 11 | |
config IRQ_TWI1 | |
int "IRQ_TWI1" | |
default 11 | |
config IRQ_CAN_RX | |
int "IRQ_CAN_RX" | |
default 11 | |
config IRQ_CAN_TX | |
int "IRQ_CAN_TX" | |
default 11 | |
config IRQ_MEM1_DMA0 | |
int "IRQ_MEM1_DMA0" | |
default 13 | |
config IRQ_MEM1_DMA1 | |
int "IRQ_MEM1_DMA1" | |
default 13 | |
help | |
Enter the priority numbers between 7-13 ONLY. Others are Reserved. | |
This applies to all the above. It is not recommended to assign the | |
highest priority number 7 to UART or any other device. | |
endmenu | |
endmenu | |
endif |