| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| /* |
| * Copyright (c) 2016 AmLogic, Inc. |
| * Author: Michael Turquette <mturquette@baylibre.com> |
| */ |
| |
| /* |
| * MultiPhase Locked Loops are outputs from a PLL with additional frequency |
| * scaling capabilities. MPLL rates are calculated as: |
| * |
| * f(N2_integer, SDM_IN ) = 2.0G/(N2_integer + SDM_IN/16384) |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-mpll.h" |
| |
| #define SDM_DEN 16384 |
| #define N2_MIN 4 |
| #define N2_MAX 511 |
| |
| static inline struct meson_clk_mpll_data * |
| meson_clk_mpll_data(struct clk_regmap *clk) |
| { |
| return (struct meson_clk_mpll_data *)clk->data; |
| } |
| |
| static long rate_from_params(unsigned long parent_rate, |
| unsigned int sdm, |
| unsigned int n2) |
| { |
| unsigned long divisor = (SDM_DEN * n2) + sdm; |
| |
| if (n2 < N2_MIN) |
| return -EINVAL; |
| |
| return DIV_ROUND_UP_ULL((u64)parent_rate * SDM_DEN, divisor); |
| } |
| |
| static void params_from_rate(unsigned long requested_rate, |
| unsigned long parent_rate, |
| unsigned int *sdm, |
| unsigned int *n2, |
| u8 flags) |
| { |
| uint64_t div = parent_rate; |
| uint64_t frac = do_div(div, requested_rate); |
| |
| frac *= SDM_DEN; |
| |
| if (flags & CLK_MESON_MPLL_ROUND_CLOSEST) |
| *sdm = DIV_ROUND_CLOSEST_ULL(frac, requested_rate); |
| else |
| *sdm = DIV_ROUND_UP_ULL(frac, requested_rate); |
| |
| if (*sdm == SDM_DEN) { |
| *sdm = 0; |
| div += 1; |
| } |
| |
| if (div < N2_MIN) { |
| *n2 = N2_MIN; |
| *sdm = 0; |
| } else if (div > N2_MAX) { |
| *n2 = N2_MAX; |
| *sdm = SDM_DEN - 1; |
| } else { |
| *n2 = div; |
| } |
| } |
| |
| static unsigned long mpll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk); |
| unsigned int sdm, n2; |
| long rate; |
| |
| sdm = meson_parm_read(clk->map, &mpll->sdm); |
| n2 = meson_parm_read(clk->map, &mpll->n2); |
| |
| rate = rate_from_params(parent_rate, sdm, n2); |
| return rate < 0 ? 0 : rate; |
| } |
| |
| static int mpll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk); |
| unsigned int sdm, n2; |
| long rate; |
| |
| params_from_rate(req->rate, req->best_parent_rate, &sdm, &n2, |
| mpll->flags); |
| |
| rate = rate_from_params(req->best_parent_rate, sdm, n2); |
| if (rate < 0) |
| return rate; |
| |
| req->rate = rate; |
| return 0; |
| } |
| |
| static int mpll_set_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk); |
| unsigned int sdm, n2; |
| unsigned long flags = 0; |
| |
| params_from_rate(rate, parent_rate, &sdm, &n2, mpll->flags); |
| |
| if (mpll->lock) |
| spin_lock_irqsave(mpll->lock, flags); |
| else |
| __acquire(mpll->lock); |
| |
| /* Set the fractional part */ |
| meson_parm_write(clk->map, &mpll->sdm, sdm); |
| |
| /* Set the integer divider part */ |
| meson_parm_write(clk->map, &mpll->n2, n2); |
| |
| if (mpll->lock) |
| spin_unlock_irqrestore(mpll->lock, flags); |
| else |
| __release(mpll->lock); |
| |
| return 0; |
| } |
| |
| static int mpll_init(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk); |
| |
| if (mpll->init_count) |
| regmap_multi_reg_write(clk->map, mpll->init_regs, |
| mpll->init_count); |
| |
| /* Enable the fractional part */ |
| meson_parm_write(clk->map, &mpll->sdm_en, 1); |
| |
| /* Set spread spectrum if possible */ |
| if (MESON_PARM_APPLICABLE(&mpll->ssen)) { |
| unsigned int ss = |
| mpll->flags & CLK_MESON_MPLL_SPREAD_SPECTRUM ? 1 : 0; |
| meson_parm_write(clk->map, &mpll->ssen, ss); |
| } |
| |
| /* Set the magic misc bit if required */ |
| if (MESON_PARM_APPLICABLE(&mpll->misc)) |
| meson_parm_write(clk->map, &mpll->misc, 1); |
| |
| return 0; |
| } |
| |
| const struct clk_ops meson_clk_mpll_ro_ops = { |
| .recalc_rate = mpll_recalc_rate, |
| .determine_rate = mpll_determine_rate, |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_mpll_ro_ops); |
| |
| const struct clk_ops meson_clk_mpll_ops = { |
| .recalc_rate = mpll_recalc_rate, |
| .determine_rate = mpll_determine_rate, |
| .set_rate = mpll_set_rate, |
| .init = mpll_init, |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_mpll_ops); |
| |
| MODULE_DESCRIPTION("Amlogic MPLL driver"); |
| MODULE_AUTHOR("Michael Turquette <mturquette@baylibre.com>"); |
| MODULE_LICENSE("GPL"); |