| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018 BayLibre, SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| #include <linux/module.h> |
| #include "clk-regmap.h" |
| |
| static int clk_regmap_gate_endisable(struct clk_hw *hw, int enable) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk); |
| int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0; |
| |
| set ^= enable; |
| |
| return regmap_update_bits(clk->map, gate->offset, BIT(gate->bit_idx), |
| set ? BIT(gate->bit_idx) : 0); |
| } |
| |
| static int clk_regmap_gate_enable(struct clk_hw *hw) |
| { |
| return clk_regmap_gate_endisable(hw, 1); |
| } |
| |
| static void clk_regmap_gate_disable(struct clk_hw *hw) |
| { |
| clk_regmap_gate_endisable(hw, 0); |
| } |
| |
| static int clk_regmap_gate_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk); |
| unsigned int val; |
| |
| regmap_read(clk->map, gate->offset, &val); |
| if (gate->flags & CLK_GATE_SET_TO_DISABLE) |
| val ^= BIT(gate->bit_idx); |
| |
| val &= BIT(gate->bit_idx); |
| |
| return val ? 1 : 0; |
| } |
| |
| const struct clk_ops clk_regmap_gate_ops = { |
| .enable = clk_regmap_gate_enable, |
| .disable = clk_regmap_gate_disable, |
| .is_enabled = clk_regmap_gate_is_enabled, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_gate_ops); |
| |
| const struct clk_ops clk_regmap_gate_ro_ops = { |
| .is_enabled = clk_regmap_gate_is_enabled, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_gate_ro_ops); |
| |
| static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw, |
| unsigned long prate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(clk->map, div->offset, &val); |
| if (ret) |
| /* Gives a hint that something is wrong */ |
| return 0; |
| |
| val >>= div->shift; |
| val &= clk_div_mask(div->width); |
| return divider_recalc_rate(hw, prate, val, div->table, div->flags, |
| div->width); |
| } |
| |
| static int clk_regmap_div_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk); |
| unsigned int val; |
| int ret; |
| |
| /* if read only, just return current value */ |
| if (div->flags & CLK_DIVIDER_READ_ONLY) { |
| ret = regmap_read(clk->map, div->offset, &val); |
| if (ret) |
| return ret; |
| |
| val >>= div->shift; |
| val &= clk_div_mask(div->width); |
| |
| return divider_ro_determine_rate(hw, req, div->table, |
| div->width, div->flags, val); |
| } |
| |
| return divider_determine_rate(hw, req, div->table, div->width, |
| div->flags); |
| } |
| |
| static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk); |
| unsigned int val; |
| int ret; |
| |
| ret = divider_get_val(rate, parent_rate, div->table, div->width, |
| div->flags); |
| if (ret < 0) |
| return ret; |
| |
| val = (unsigned int)ret << div->shift; |
| return regmap_update_bits(clk->map, div->offset, |
| clk_div_mask(div->width) << div->shift, val); |
| }; |
| |
| /* Would prefer clk_regmap_div_ro_ops but clashes with qcom */ |
| |
| const struct clk_ops clk_regmap_divider_ops = { |
| .recalc_rate = clk_regmap_div_recalc_rate, |
| .determine_rate = clk_regmap_div_determine_rate, |
| .set_rate = clk_regmap_div_set_rate, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_divider_ops); |
| |
| const struct clk_ops clk_regmap_divider_ro_ops = { |
| .recalc_rate = clk_regmap_div_recalc_rate, |
| .determine_rate = clk_regmap_div_determine_rate, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_divider_ro_ops); |
| |
| static u8 clk_regmap_mux_get_parent(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(clk->map, mux->offset, &val); |
| if (ret) |
| return ret; |
| |
| val >>= mux->shift; |
| val &= mux->mask; |
| return clk_mux_val_to_index(hw, mux->table, mux->flags, val); |
| } |
| |
| static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk); |
| unsigned int val = clk_mux_index_to_val(mux->table, mux->flags, index); |
| |
| return regmap_update_bits(clk->map, mux->offset, |
| mux->mask << mux->shift, |
| val << mux->shift); |
| } |
| |
| static int clk_regmap_mux_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk); |
| |
| return clk_mux_determine_rate_flags(hw, req, mux->flags); |
| } |
| |
| const struct clk_ops clk_regmap_mux_ops = { |
| .get_parent = clk_regmap_mux_get_parent, |
| .set_parent = clk_regmap_mux_set_parent, |
| .determine_rate = clk_regmap_mux_determine_rate, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_mux_ops); |
| |
| const struct clk_ops clk_regmap_mux_ro_ops = { |
| .get_parent = clk_regmap_mux_get_parent, |
| }; |
| EXPORT_SYMBOL_GPL(clk_regmap_mux_ro_ops); |
| |
| MODULE_DESCRIPTION("Amlogic regmap backed clock driver"); |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_LICENSE("GPL"); |