| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver |
| * |
| * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> |
| * |
| * Datasheet: http://www.ti.com/lit/ds/symlink/adc12138.pdf |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/completion.h> |
| #include <linux/clk.h> |
| #include <linux/spi/spi.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define ADC12138_MODE_AUTO_CAL 0x08 |
| #define ADC12138_MODE_READ_STATUS 0x0c |
| #define ADC12138_MODE_ACQUISITION_TIME_6 0x0e |
| #define ADC12138_MODE_ACQUISITION_TIME_10 0x4e |
| #define ADC12138_MODE_ACQUISITION_TIME_18 0x8e |
| #define ADC12138_MODE_ACQUISITION_TIME_34 0xce |
| |
| #define ADC12138_STATUS_CAL BIT(6) |
| |
| enum { |
| adc12130, |
| adc12132, |
| adc12138, |
| }; |
| |
| struct adc12138 { |
| struct spi_device *spi; |
| unsigned int id; |
| /* conversion clock */ |
| struct clk *cclk; |
| /* positive analog voltage reference */ |
| struct regulator *vref_p; |
| /* negative analog voltage reference */ |
| struct regulator *vref_n; |
| struct mutex lock; |
| struct completion complete; |
| /* The number of cclk periods for the S/H's acquisition time */ |
| unsigned int acquisition_time; |
| |
| u8 tx_buf[2] ____cacheline_aligned; |
| u8 rx_buf[2]; |
| }; |
| |
| #define ADC12138_VOLTAGE_CHANNEL(chan) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = chan, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| | BIT(IIO_CHAN_INFO_OFFSET), \ |
| .scan_index = chan, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 13, \ |
| .storagebits = 16, \ |
| .shift = 3, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| #define ADC12138_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = (chan1), \ |
| .channel2 = (chan2), \ |
| .differential = 1, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ |
| | BIT(IIO_CHAN_INFO_OFFSET), \ |
| .scan_index = si, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 13, \ |
| .storagebits = 16, \ |
| .shift = 3, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec adc12132_channels[] = { |
| ADC12138_VOLTAGE_CHANNEL(0), |
| ADC12138_VOLTAGE_CHANNEL(1), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 2), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 3), |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| static const struct iio_chan_spec adc12138_channels[] = { |
| ADC12138_VOLTAGE_CHANNEL(0), |
| ADC12138_VOLTAGE_CHANNEL(1), |
| ADC12138_VOLTAGE_CHANNEL(2), |
| ADC12138_VOLTAGE_CHANNEL(3), |
| ADC12138_VOLTAGE_CHANNEL(4), |
| ADC12138_VOLTAGE_CHANNEL(5), |
| ADC12138_VOLTAGE_CHANNEL(6), |
| ADC12138_VOLTAGE_CHANNEL(7), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 8), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 9), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(2, 3, 10), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(3, 2, 11), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(4, 5, 12), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(5, 4, 13), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(6, 7, 14), |
| ADC12138_VOLTAGE_CHANNEL_DIFF(7, 6, 15), |
| IIO_CHAN_SOFT_TIMESTAMP(16), |
| }; |
| |
| static int adc12138_mode_programming(struct adc12138 *adc, u8 mode, |
| void *rx_buf, int len) |
| { |
| struct spi_transfer xfer = { |
| .tx_buf = adc->tx_buf, |
| .rx_buf = adc->rx_buf, |
| .len = len, |
| }; |
| int ret; |
| |
| /* Skip unused bits for ADC12130 and ADC12132 */ |
| if (adc->id != adc12138) |
| mode = (mode & 0xc0) | ((mode & 0x0f) << 2); |
| |
| adc->tx_buf[0] = mode; |
| |
| ret = spi_sync_transfer(adc->spi, &xfer, 1); |
| if (ret) |
| return ret; |
| |
| memcpy(rx_buf, adc->rx_buf, len); |
| |
| return 0; |
| } |
| |
| static int adc12138_read_status(struct adc12138 *adc) |
| { |
| u8 rx_buf[2]; |
| int ret; |
| |
| ret = adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS, |
| rx_buf, 2); |
| if (ret) |
| return ret; |
| |
| return (rx_buf[0] << 1) | (rx_buf[1] >> 7); |
| } |
| |
| static int __adc12138_start_conv(struct adc12138 *adc, |
| struct iio_chan_spec const *channel, |
| void *data, int len) |
| |
| { |
| static const u8 ch_to_mux[] = { 0, 4, 1, 5, 2, 6, 3, 7 }; |
| u8 mode = (ch_to_mux[channel->channel] << 4) | |
| (channel->differential ? 0 : 0x80); |
| |
| return adc12138_mode_programming(adc, mode, data, len); |
| } |
| |
| static int adc12138_start_conv(struct adc12138 *adc, |
| struct iio_chan_spec const *channel) |
| { |
| u8 trash; |
| |
| return __adc12138_start_conv(adc, channel, &trash, 1); |
| } |
| |
| static int adc12138_start_and_read_conv(struct adc12138 *adc, |
| struct iio_chan_spec const *channel, |
| __be16 *data) |
| { |
| return __adc12138_start_conv(adc, channel, data, 2); |
| } |
| |
| static int adc12138_read_conv_data(struct adc12138 *adc, __be16 *value) |
| { |
| /* Issue a read status instruction and read previous conversion data */ |
| return adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS, |
| value, sizeof(*value)); |
| } |
| |
| static int adc12138_wait_eoc(struct adc12138 *adc, unsigned long timeout) |
| { |
| if (!wait_for_completion_timeout(&adc->complete, timeout)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int adc12138_adc_conversion(struct adc12138 *adc, |
| struct iio_chan_spec const *channel, |
| __be16 *value) |
| { |
| int ret; |
| |
| reinit_completion(&adc->complete); |
| |
| ret = adc12138_start_conv(adc, channel); |
| if (ret) |
| return ret; |
| |
| ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100)); |
| if (ret) |
| return ret; |
| |
| return adc12138_read_conv_data(adc, value); |
| } |
| |
| static int adc12138_read_raw(struct iio_dev *iio, |
| struct iio_chan_spec const *channel, int *value, |
| int *shift, long mask) |
| { |
| struct adc12138 *adc = iio_priv(iio); |
| int ret; |
| __be16 data; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| mutex_lock(&adc->lock); |
| ret = adc12138_adc_conversion(adc, channel, &data); |
| mutex_unlock(&adc->lock); |
| if (ret) |
| return ret; |
| |
| *value = sign_extend32(be16_to_cpu(data) >> 3, 12); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| ret = regulator_get_voltage(adc->vref_p); |
| if (ret < 0) |
| return ret; |
| *value = ret; |
| |
| if (!IS_ERR(adc->vref_n)) { |
| ret = regulator_get_voltage(adc->vref_n); |
| if (ret < 0) |
| return ret; |
| *value -= ret; |
| } |
| |
| /* convert regulator output voltage to mV */ |
| *value /= 1000; |
| *shift = channel->scan_type.realbits - 1; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| case IIO_CHAN_INFO_OFFSET: |
| if (!IS_ERR(adc->vref_n)) { |
| *value = regulator_get_voltage(adc->vref_n); |
| if (*value < 0) |
| return *value; |
| } else { |
| *value = 0; |
| } |
| |
| /* convert regulator output voltage to mV */ |
| *value /= 1000; |
| |
| return IIO_VAL_INT; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct iio_info adc12138_info = { |
| .read_raw = adc12138_read_raw, |
| }; |
| |
| static int adc12138_init(struct adc12138 *adc) |
| { |
| int ret; |
| int status; |
| u8 mode; |
| u8 trash; |
| |
| reinit_completion(&adc->complete); |
| |
| ret = adc12138_mode_programming(adc, ADC12138_MODE_AUTO_CAL, &trash, 1); |
| if (ret) |
| return ret; |
| |
| /* data output at this time has no significance */ |
| status = adc12138_read_status(adc); |
| if (status < 0) |
| return status; |
| |
| adc12138_wait_eoc(adc, msecs_to_jiffies(100)); |
| |
| status = adc12138_read_status(adc); |
| if (status & ADC12138_STATUS_CAL) { |
| dev_warn(&adc->spi->dev, |
| "Auto Cal sequence is still in progress: %#x\n", |
| status); |
| return -EIO; |
| } |
| |
| switch (adc->acquisition_time) { |
| case 6: |
| mode = ADC12138_MODE_ACQUISITION_TIME_6; |
| break; |
| case 10: |
| mode = ADC12138_MODE_ACQUISITION_TIME_10; |
| break; |
| case 18: |
| mode = ADC12138_MODE_ACQUISITION_TIME_18; |
| break; |
| case 34: |
| mode = ADC12138_MODE_ACQUISITION_TIME_34; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return adc12138_mode_programming(adc, mode, &trash, 1); |
| } |
| |
| static irqreturn_t adc12138_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct adc12138 *adc = iio_priv(indio_dev); |
| __be16 data[20] = { }; /* 16x 2 bytes ADC data + 8 bytes timestamp */ |
| __be16 trash; |
| int ret; |
| int scan_index; |
| int i = 0; |
| |
| mutex_lock(&adc->lock); |
| |
| for_each_set_bit(scan_index, indio_dev->active_scan_mask, |
| indio_dev->masklength) { |
| const struct iio_chan_spec *scan_chan = |
| &indio_dev->channels[scan_index]; |
| |
| reinit_completion(&adc->complete); |
| |
| ret = adc12138_start_and_read_conv(adc, scan_chan, |
| i ? &data[i - 1] : &trash); |
| if (ret) { |
| dev_warn(&adc->spi->dev, |
| "failed to start conversion\n"); |
| goto out; |
| } |
| |
| ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100)); |
| if (ret) { |
| dev_warn(&adc->spi->dev, "wait eoc timeout\n"); |
| goto out; |
| } |
| |
| i++; |
| } |
| |
| if (i) { |
| ret = adc12138_read_conv_data(adc, &data[i - 1]); |
| if (ret) { |
| dev_warn(&adc->spi->dev, |
| "failed to get conversion data\n"); |
| goto out; |
| } |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, data, |
| iio_get_time_ns(indio_dev)); |
| out: |
| mutex_unlock(&adc->lock); |
| |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t adc12138_eoc_handler(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct adc12138 *adc = iio_priv(indio_dev); |
| |
| complete(&adc->complete); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int adc12138_probe(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev; |
| struct adc12138 *adc; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| adc = iio_priv(indio_dev); |
| adc->spi = spi; |
| adc->id = spi_get_device_id(spi)->driver_data; |
| mutex_init(&adc->lock); |
| init_completion(&adc->complete); |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->info = &adc12138_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| switch (adc->id) { |
| case adc12130: |
| case adc12132: |
| indio_dev->channels = adc12132_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adc12132_channels); |
| break; |
| case adc12138: |
| indio_dev->channels = adc12138_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adc12138_channels); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32(spi->dev.of_node, "ti,acquisition-time", |
| &adc->acquisition_time); |
| if (ret) |
| adc->acquisition_time = 10; |
| |
| adc->cclk = devm_clk_get(&spi->dev, NULL); |
| if (IS_ERR(adc->cclk)) |
| return PTR_ERR(adc->cclk); |
| |
| adc->vref_p = devm_regulator_get(&spi->dev, "vref-p"); |
| if (IS_ERR(adc->vref_p)) |
| return PTR_ERR(adc->vref_p); |
| |
| adc->vref_n = devm_regulator_get_optional(&spi->dev, "vref-n"); |
| if (IS_ERR(adc->vref_n)) { |
| /* |
| * Assume vref_n is 0V if an optional regulator is not |
| * specified, otherwise return the error code. |
| */ |
| ret = PTR_ERR(adc->vref_n); |
| if (ret != -ENODEV) |
| return ret; |
| } |
| |
| ret = devm_request_irq(&spi->dev, spi->irq, adc12138_eoc_handler, |
| IRQF_TRIGGER_RISING, indio_dev->name, indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(adc->cclk); |
| if (ret) |
| return ret; |
| |
| ret = regulator_enable(adc->vref_p); |
| if (ret) |
| goto err_clk_disable; |
| |
| if (!IS_ERR(adc->vref_n)) { |
| ret = regulator_enable(adc->vref_n); |
| if (ret) |
| goto err_vref_p_disable; |
| } |
| |
| ret = adc12138_init(adc); |
| if (ret) |
| goto err_vref_n_disable; |
| |
| spi_set_drvdata(spi, indio_dev); |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| adc12138_trigger_handler, NULL); |
| if (ret) |
| goto err_vref_n_disable; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto err_buffer_cleanup; |
| |
| return 0; |
| err_buffer_cleanup: |
| iio_triggered_buffer_cleanup(indio_dev); |
| err_vref_n_disable: |
| if (!IS_ERR(adc->vref_n)) |
| regulator_disable(adc->vref_n); |
| err_vref_p_disable: |
| regulator_disable(adc->vref_p); |
| err_clk_disable: |
| clk_disable_unprepare(adc->cclk); |
| |
| return ret; |
| } |
| |
| static int adc12138_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct adc12138 *adc = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| iio_triggered_buffer_cleanup(indio_dev); |
| if (!IS_ERR(adc->vref_n)) |
| regulator_disable(adc->vref_n); |
| regulator_disable(adc->vref_p); |
| clk_disable_unprepare(adc->cclk); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| |
| static const struct of_device_id adc12138_dt_ids[] = { |
| { .compatible = "ti,adc12130", }, |
| { .compatible = "ti,adc12132", }, |
| { .compatible = "ti,adc12138", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, adc12138_dt_ids); |
| |
| #endif |
| |
| static const struct spi_device_id adc12138_id[] = { |
| { "adc12130", adc12130 }, |
| { "adc12132", adc12132 }, |
| { "adc12138", adc12138 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, adc12138_id); |
| |
| static struct spi_driver adc12138_driver = { |
| .driver = { |
| .name = "adc12138", |
| .of_match_table = of_match_ptr(adc12138_dt_ids), |
| }, |
| .probe = adc12138_probe, |
| .remove = adc12138_remove, |
| .id_table = adc12138_id, |
| }; |
| module_spi_driver(adc12138_driver); |
| |
| MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); |
| MODULE_DESCRIPTION("ADC12130/ADC12132/ADC12138 driver"); |
| MODULE_LICENSE("GPL v2"); |