| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * AD8366 and similar Gain Amplifiers |
| * This driver supports the following gain amplifiers: |
| * AD8366 Dual-Digital Variable Gain Amplifier (VGA) |
| * ADA4961 BiCMOS RF Digital Gain Amplifier (DGA) |
| * ADL5240 Digitally controlled variable gain amplifier (VGA) |
| * HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator |
| * |
| * Copyright 2012-2019 Analog Devices Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/spi/spi.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/bitrev.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| enum ad8366_type { |
| ID_AD8366, |
| ID_ADA4961, |
| ID_ADL5240, |
| ID_HMC1119, |
| }; |
| |
| struct ad8366_info { |
| int gain_min; |
| int gain_max; |
| }; |
| |
| struct ad8366_state { |
| struct spi_device *spi; |
| struct regulator *reg; |
| struct mutex lock; /* protect sensor state */ |
| struct gpio_desc *reset_gpio; |
| unsigned char ch[2]; |
| enum ad8366_type type; |
| struct ad8366_info *info; |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| */ |
| unsigned char data[2] ____cacheline_aligned; |
| }; |
| |
| static struct ad8366_info ad8366_infos[] = { |
| [ID_AD8366] = { |
| .gain_min = 4500, |
| .gain_max = 20500, |
| }, |
| [ID_ADA4961] = { |
| .gain_min = -6000, |
| .gain_max = 15000, |
| }, |
| [ID_ADL5240] = { |
| .gain_min = -11500, |
| .gain_max = 20000, |
| }, |
| [ID_HMC1119] = { |
| .gain_min = -31750, |
| .gain_max = 0, |
| }, |
| }; |
| |
| static int ad8366_write(struct iio_dev *indio_dev, |
| unsigned char ch_a, unsigned char ch_b) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| switch (st->type) { |
| case ID_AD8366: |
| ch_a = bitrev8(ch_a & 0x3F); |
| ch_b = bitrev8(ch_b & 0x3F); |
| |
| st->data[0] = ch_b >> 4; |
| st->data[1] = (ch_b << 4) | (ch_a >> 2); |
| break; |
| case ID_ADA4961: |
| st->data[0] = ch_a & 0x1F; |
| break; |
| case ID_ADL5240: |
| st->data[0] = (ch_a & 0x3F); |
| break; |
| case ID_HMC1119: |
| st->data[0] = ch_a; |
| break; |
| } |
| |
| ret = spi_write(st->spi, st->data, indio_dev->num_channels); |
| if (ret < 0) |
| dev_err(&indio_dev->dev, "write failed (%d)", ret); |
| |
| return ret; |
| } |
| |
| static int ad8366_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| int ret; |
| int code, gain = 0; |
| |
| mutex_lock(&st->lock); |
| switch (m) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| code = st->ch[chan->channel]; |
| |
| switch (st->type) { |
| case ID_AD8366: |
| gain = code * 253 + 4500; |
| break; |
| case ID_ADA4961: |
| gain = 15000 - code * 1000; |
| break; |
| case ID_ADL5240: |
| gain = 20000 - 31500 + code * 500; |
| break; |
| case ID_HMC1119: |
| gain = -1 * code * 250; |
| break; |
| } |
| |
| /* Values in dB */ |
| *val = gain / 1000; |
| *val2 = (gain % 1000) * 1000; |
| |
| ret = IIO_VAL_INT_PLUS_MICRO_DB; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| }; |
| |
| static int ad8366_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| struct ad8366_state *st = iio_priv(indio_dev); |
| struct ad8366_info *inf = st->info; |
| int code = 0, gain; |
| int ret; |
| |
| /* Values in dB */ |
| if (val < 0) |
| gain = (val * 1000) - (val2 / 1000); |
| else |
| gain = (val * 1000) + (val2 / 1000); |
| |
| if (gain > inf->gain_max || gain < inf->gain_min) |
| return -EINVAL; |
| |
| switch (st->type) { |
| case ID_AD8366: |
| code = (gain - 4500) / 253; |
| break; |
| case ID_ADA4961: |
| code = (15000 - gain) / 1000; |
| break; |
| case ID_ADL5240: |
| code = ((gain - 500 - 20000) / 500) & 0x3F; |
| break; |
| case ID_HMC1119: |
| code = (abs(gain) / 250) & 0x7F; |
| break; |
| } |
| |
| mutex_lock(&st->lock); |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| st->ch[chan->channel] = code; |
| ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| } |
| |
| static int ad8366_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return IIO_VAL_INT_PLUS_MICRO_DB; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info ad8366_info = { |
| .read_raw = &ad8366_read_raw, |
| .write_raw = &ad8366_write_raw, |
| .write_raw_get_fmt = &ad8366_write_raw_get_fmt, |
| }; |
| |
| #define AD8366_CHAN(_channel) { \ |
| .type = IIO_VOLTAGE, \ |
| .output = 1, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\ |
| } |
| |
| static const struct iio_chan_spec ad8366_channels[] = { |
| AD8366_CHAN(0), |
| AD8366_CHAN(1), |
| }; |
| |
| static const struct iio_chan_spec ada4961_channels[] = { |
| AD8366_CHAN(0), |
| }; |
| |
| static int ad8366_probe(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev; |
| struct ad8366_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| st->reg = devm_regulator_get(&spi->dev, "vcc"); |
| if (!IS_ERR(st->reg)) { |
| ret = regulator_enable(st->reg); |
| if (ret) |
| return ret; |
| } |
| |
| spi_set_drvdata(spi, indio_dev); |
| mutex_init(&st->lock); |
| st->spi = spi; |
| st->type = spi_get_device_id(spi)->driver_data; |
| |
| switch (st->type) { |
| case ID_AD8366: |
| indio_dev->channels = ad8366_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); |
| break; |
| case ID_ADA4961: |
| case ID_ADL5240: |
| case ID_HMC1119: |
| st->reset_gpio = devm_gpiod_get(&spi->dev, "reset", |
| GPIOD_OUT_HIGH); |
| indio_dev->channels = ada4961_channels; |
| indio_dev->num_channels = ARRAY_SIZE(ada4961_channels); |
| break; |
| default: |
| dev_err(&spi->dev, "Invalid device ID\n"); |
| ret = -EINVAL; |
| goto error_disable_reg; |
| } |
| |
| st->info = &ad8366_infos[st->type]; |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->info = &ad8366_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| ret = ad8366_write(indio_dev, 0 , 0); |
| if (ret < 0) |
| goto error_disable_reg; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto error_disable_reg; |
| |
| return 0; |
| |
| error_disable_reg: |
| if (!IS_ERR(st->reg)) |
| regulator_disable(st->reg); |
| |
| return ret; |
| } |
| |
| static int ad8366_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct ad8366_state *st = iio_priv(indio_dev); |
| struct regulator *reg = st->reg; |
| |
| iio_device_unregister(indio_dev); |
| |
| if (!IS_ERR(reg)) |
| regulator_disable(reg); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id ad8366_id[] = { |
| {"ad8366", ID_AD8366}, |
| {"ada4961", ID_ADA4961}, |
| {"adl5240", ID_ADL5240}, |
| {"hmc1119", ID_HMC1119}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, ad8366_id); |
| |
| static struct spi_driver ad8366_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| }, |
| .probe = ad8366_probe, |
| .remove = ad8366_remove, |
| .id_table = ad8366_id, |
| }; |
| |
| module_spi_driver(ad8366_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); |
| MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers"); |
| MODULE_LICENSE("GPL v2"); |