| /* |
| * Sony CXD2820R demodulator driver |
| * |
| * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| |
| #include "cxd2820r_priv.h" |
| |
| int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, bw_i; |
| u32 if_freq, if_ctl; |
| u64 num; |
| u8 buf[3], bw_param; |
| u8 bw_params1[][5] = { |
| { 0x1c, 0xb3, 0x33, 0x33, 0x33 }, /* 5 MHz */ |
| { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ |
| { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ |
| { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ |
| }; |
| struct reg_val_mask tab[] = { |
| { 0x00080, 0x02, 0xff }, |
| { 0x00081, 0x20, 0xff }, |
| { 0x00085, 0x07, 0xff }, |
| { 0x00088, 0x01, 0xff }, |
| { 0x02069, 0x01, 0xff }, |
| |
| { 0x0207f, 0x2a, 0xff }, |
| { 0x02082, 0x0a, 0xff }, |
| { 0x02083, 0x0a, 0xff }, |
| { 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 }, |
| { 0x02070, priv->cfg.ts_mode, 0xff }, |
| { 0x020b5, priv->cfg.spec_inv << 4, 0x10 }, |
| { 0x02567, 0x07, 0x0f }, |
| { 0x02569, 0x03, 0x03 }, |
| { 0x02595, 0x1a, 0xff }, |
| { 0x02596, 0x50, 0xff }, |
| { 0x02a8c, 0x00, 0xff }, |
| { 0x02a8d, 0x34, 0xff }, |
| { 0x02a45, 0x06, 0x07 }, |
| { 0x03f10, 0x0d, 0xff }, |
| { 0x03f11, 0x02, 0xff }, |
| { 0x03f12, 0x01, 0xff }, |
| { 0x03f23, 0x2c, 0xff }, |
| { 0x03f51, 0x13, 0xff }, |
| { 0x03f52, 0x01, 0xff }, |
| { 0x03f53, 0x00, 0xff }, |
| { 0x027e6, 0x14, 0xff }, |
| { 0x02786, 0x02, 0x07 }, |
| { 0x02787, 0x40, 0xe0 }, |
| { 0x027ef, 0x10, 0x18 }, |
| }; |
| |
| dev_dbg(&priv->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", __func__, |
| c->frequency, c->bandwidth_hz); |
| |
| switch (c->bandwidth_hz) { |
| case 5000000: |
| bw_i = 0; |
| bw_param = 3; |
| break; |
| case 6000000: |
| bw_i = 1; |
| bw_param = 2; |
| break; |
| case 7000000: |
| bw_i = 2; |
| bw_param = 1; |
| break; |
| case 8000000: |
| bw_i = 3; |
| bw_param = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| if (priv->delivery_system != SYS_DVBT2) { |
| for (i = 0; i < ARRAY_SIZE(tab); i++) { |
| ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, |
| tab[i].val, tab[i].mask); |
| if (ret) |
| goto error; |
| } |
| } |
| |
| priv->delivery_system = SYS_DVBT2; |
| |
| /* program IF frequency */ |
| if (fe->ops.tuner_ops.get_if_frequency) { |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); |
| if (ret) |
| goto error; |
| } else |
| if_freq = 0; |
| |
| dev_dbg(&priv->i2c->dev, "%s: if_freq=%d\n", __func__, if_freq); |
| |
| num = if_freq / 1000; /* Hz => kHz */ |
| num *= 0x1000000; |
| if_ctl = cxd2820r_div_u64_round_closest(num, 41000); |
| buf[0] = ((if_ctl >> 16) & 0xff); |
| buf[1] = ((if_ctl >> 8) & 0xff); |
| buf[2] = ((if_ctl >> 0) & 0xff); |
| |
| ret = cxd2820r_wr_regs(priv, 0x020b6, buf, 3); |
| if (ret) |
| goto error; |
| |
| ret = cxd2820r_wr_regs(priv, 0x0209f, bw_params1[bw_i], 5); |
| if (ret) |
| goto error; |
| |
| ret = cxd2820r_wr_reg_mask(priv, 0x020d7, bw_param << 6, 0xc0); |
| if (ret) |
| goto error; |
| |
| ret = cxd2820r_wr_reg(priv, 0x000ff, 0x08); |
| if (ret) |
| goto error; |
| |
| ret = cxd2820r_wr_reg(priv, 0x000fe, 0x01); |
| if (ret) |
| goto error; |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| |
| } |
| |
| int cxd2820r_get_frontend_t2(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| u8 buf[2]; |
| |
| ret = cxd2820r_rd_regs(priv, 0x0205c, buf, 2); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 0) & 0x07) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| case 2: |
| c->transmission_mode = TRANSMISSION_MODE_4K; |
| break; |
| case 3: |
| c->transmission_mode = TRANSMISSION_MODE_1K; |
| break; |
| case 4: |
| c->transmission_mode = TRANSMISSION_MODE_16K; |
| break; |
| case 5: |
| c->transmission_mode = TRANSMISSION_MODE_32K; |
| break; |
| } |
| |
| switch ((buf[1] >> 4) & 0x07) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| case 4: |
| c->guard_interval = GUARD_INTERVAL_1_128; |
| break; |
| case 5: |
| c->guard_interval = GUARD_INTERVAL_19_128; |
| break; |
| case 6: |
| c->guard_interval = GUARD_INTERVAL_19_256; |
| break; |
| } |
| |
| ret = cxd2820r_rd_regs(priv, 0x0225b, buf, 2); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 0) & 0x07) { |
| case 0: |
| c->fec_inner = FEC_1_2; |
| break; |
| case 1: |
| c->fec_inner = FEC_3_5; |
| break; |
| case 2: |
| c->fec_inner = FEC_2_3; |
| break; |
| case 3: |
| c->fec_inner = FEC_3_4; |
| break; |
| case 4: |
| c->fec_inner = FEC_4_5; |
| break; |
| case 5: |
| c->fec_inner = FEC_5_6; |
| break; |
| } |
| |
| switch ((buf[1] >> 0) & 0x07) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| case 3: |
| c->modulation = QAM_256; |
| break; |
| } |
| |
| ret = cxd2820r_rd_reg(priv, 0x020b5, &buf[0]); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 4) & 0x01) { |
| case 0: |
| c->inversion = INVERSION_OFF; |
| break; |
| case 1: |
| c->inversion = INVERSION_ON; |
| break; |
| } |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_status_t2(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret; |
| u8 buf[1]; |
| *status = 0; |
| |
| ret = cxd2820r_rd_reg(priv, 0x02010 , &buf[0]); |
| if (ret) |
| goto error; |
| |
| if ((buf[0] & 0x07) == 6) { |
| if (((buf[0] >> 5) & 0x01) == 1) { |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; |
| } else { |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC; |
| } |
| } |
| |
| dev_dbg(&priv->i2c->dev, "%s: lock=%02x\n", __func__, buf[0]); |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_ber_t2(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret; |
| u8 buf[4]; |
| unsigned int errbits; |
| *ber = 0; |
| /* FIXME: correct calculation */ |
| |
| ret = cxd2820r_rd_regs(priv, 0x02039, buf, sizeof(buf)); |
| if (ret) |
| goto error; |
| |
| if ((buf[0] >> 4) & 0x01) { |
| errbits = (buf[0] & 0x0f) << 24 | buf[1] << 16 | |
| buf[2] << 8 | buf[3]; |
| |
| if (errbits) |
| *ber = errbits * 64 / 16588800; |
| } |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_signal_strength_t2(struct dvb_frontend *fe, |
| u16 *strength) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| u16 tmp; |
| |
| ret = cxd2820r_rd_regs(priv, 0x02026, buf, sizeof(buf)); |
| if (ret) |
| goto error; |
| |
| tmp = (buf[0] & 0x0f) << 8 | buf[1]; |
| tmp = ~tmp & 0x0fff; |
| |
| /* scale value to 0x0000-0xffff from 0x0000-0x0fff */ |
| *strength = tmp * 0xffff / 0x0fff; |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_snr_t2(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| u16 tmp; |
| /* report SNR in dB * 10 */ |
| |
| ret = cxd2820r_rd_regs(priv, 0x02028, buf, sizeof(buf)); |
| if (ret) |
| goto error; |
| |
| tmp = (buf[0] & 0x0f) << 8 | buf[1]; |
| #define CXD2820R_LOG10_8_24 15151336 /* log10(8) << 24 */ |
| if (tmp) |
| *snr = (intlog10(tmp) - CXD2820R_LOG10_8_24) / ((1 << 24) |
| / 100); |
| else |
| *snr = 0; |
| |
| dev_dbg(&priv->i2c->dev, "%s: dBx10=%d val=%04x\n", __func__, *snr, |
| tmp); |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_read_ucblocks_t2(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| *ucblocks = 0; |
| /* no way to read ? */ |
| return 0; |
| } |
| |
| int cxd2820r_sleep_t2(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret, i; |
| struct reg_val_mask tab[] = { |
| { 0x000ff, 0x1f, 0xff }, |
| { 0x00085, 0x00, 0xff }, |
| { 0x00088, 0x01, 0xff }, |
| { 0x02069, 0x00, 0xff }, |
| { 0x00081, 0x00, 0xff }, |
| { 0x00080, 0x00, 0xff }, |
| }; |
| |
| dev_dbg(&priv->i2c->dev, "%s\n", __func__); |
| |
| for (i = 0; i < ARRAY_SIZE(tab); i++) { |
| ret = cxd2820r_wr_reg_mask(priv, tab[i].reg, tab[i].val, |
| tab[i].mask); |
| if (ret) |
| goto error; |
| } |
| |
| priv->delivery_system = SYS_UNDEFINED; |
| |
| return ret; |
| error: |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| int cxd2820r_get_tune_settings_t2(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 1500; |
| s->step_size = fe->ops.info.frequency_stepsize * 2; |
| s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; |
| |
| return 0; |
| } |