| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (C) 2013-2017 B.A.T.M.A.N. contributors: |
| * |
| * Linus Lüssing, Marek Lindner |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of version 2 of the GNU General Public |
| * License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "bat_v.h" |
| #include "main.h" |
| |
| #include <linux/atomic.h> |
| #include <linux/cache.h> |
| #include <linux/errno.h> |
| #include <linux/if_ether.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/kref.h> |
| #include <linux/netdevice.h> |
| #include <linux/netlink.h> |
| #include <linux/rculist.h> |
| #include <linux/rcupdate.h> |
| #include <linux/seq_file.h> |
| #include <linux/stddef.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| #include <net/genetlink.h> |
| #include <net/netlink.h> |
| #include <uapi/linux/batadv_packet.h> |
| #include <uapi/linux/batman_adv.h> |
| |
| #include "bat_algo.h" |
| #include "bat_v_elp.h" |
| #include "bat_v_ogm.h" |
| #include "gateway_client.h" |
| #include "gateway_common.h" |
| #include "hard-interface.h" |
| #include "hash.h" |
| #include "log.h" |
| #include "netlink.h" |
| #include "originator.h" |
| |
| struct sk_buff; |
| |
| static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface) |
| { |
| struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); |
| struct batadv_hard_iface *primary_if; |
| |
| primary_if = batadv_primary_if_get_selected(bat_priv); |
| |
| if (primary_if) { |
| batadv_v_elp_iface_activate(primary_if, hard_iface); |
| batadv_hardif_put(primary_if); |
| } |
| |
| /* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can |
| * set the interface as ACTIVE right away, without any risk of race |
| * condition |
| */ |
| if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED) |
| hard_iface->if_status = BATADV_IF_ACTIVE; |
| } |
| |
| static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface) |
| { |
| int ret; |
| |
| ret = batadv_v_elp_iface_enable(hard_iface); |
| if (ret < 0) |
| return ret; |
| |
| ret = batadv_v_ogm_iface_enable(hard_iface); |
| if (ret < 0) |
| batadv_v_elp_iface_disable(hard_iface); |
| |
| return ret; |
| } |
| |
| static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface) |
| { |
| batadv_v_elp_iface_disable(hard_iface); |
| } |
| |
| static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface) |
| { |
| batadv_v_elp_primary_iface_set(hard_iface); |
| batadv_v_ogm_primary_iface_set(hard_iface); |
| } |
| |
| /** |
| * batadv_v_iface_update_mac() - react to hard-interface MAC address change |
| * @hard_iface: the modified interface |
| * |
| * If the modified interface is the primary one, update the originator |
| * address in the ELP and OGM messages to reflect the new MAC address. |
| */ |
| static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface) |
| { |
| struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); |
| struct batadv_hard_iface *primary_if; |
| |
| primary_if = batadv_primary_if_get_selected(bat_priv); |
| if (primary_if != hard_iface) |
| goto out; |
| |
| batadv_v_primary_iface_set(hard_iface); |
| out: |
| if (primary_if) |
| batadv_hardif_put(primary_if); |
| } |
| |
| static void |
| batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh) |
| { |
| ewma_throughput_init(&hardif_neigh->bat_v.throughput); |
| INIT_WORK(&hardif_neigh->bat_v.metric_work, |
| batadv_v_elp_throughput_metric_update); |
| } |
| |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| /** |
| * batadv_v_orig_print_neigh() - print neighbors for the originator table |
| * @orig_node: the orig_node for which the neighbors are printed |
| * @if_outgoing: outgoing interface for these entries |
| * @seq: debugfs table seq_file struct |
| * |
| * Must be called while holding an rcu lock. |
| */ |
| static void |
| batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node, |
| struct batadv_hard_iface *if_outgoing, |
| struct seq_file *seq) |
| { |
| struct batadv_neigh_node *neigh_node; |
| struct batadv_neigh_ifinfo *n_ifinfo; |
| |
| hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) { |
| n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing); |
| if (!n_ifinfo) |
| continue; |
| |
| seq_printf(seq, " %pM (%9u.%1u)", |
| neigh_node->addr, |
| n_ifinfo->bat_v.throughput / 10, |
| n_ifinfo->bat_v.throughput % 10); |
| |
| batadv_neigh_ifinfo_put(n_ifinfo); |
| } |
| } |
| |
| /** |
| * batadv_v_hardif_neigh_print() - print a single ELP neighbour node |
| * @seq: neighbour table seq_file struct |
| * @hardif_neigh: hardif neighbour information |
| */ |
| static void |
| batadv_v_hardif_neigh_print(struct seq_file *seq, |
| struct batadv_hardif_neigh_node *hardif_neigh) |
| { |
| int last_secs, last_msecs; |
| u32 throughput; |
| |
| last_secs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) / 1000; |
| last_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) % 1000; |
| throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput); |
| |
| seq_printf(seq, "%pM %4i.%03is (%9u.%1u) [%10s]\n", |
| hardif_neigh->addr, last_secs, last_msecs, throughput / 10, |
| throughput % 10, hardif_neigh->if_incoming->net_dev->name); |
| } |
| |
| /** |
| * batadv_v_neigh_print() - print the single hop neighbour list |
| * @bat_priv: the bat priv with all the soft interface information |
| * @seq: neighbour table seq_file struct |
| */ |
| static void batadv_v_neigh_print(struct batadv_priv *bat_priv, |
| struct seq_file *seq) |
| { |
| struct net_device *net_dev = (struct net_device *)seq->private; |
| struct batadv_hardif_neigh_node *hardif_neigh; |
| struct batadv_hard_iface *hard_iface; |
| int batman_count = 0; |
| |
| seq_puts(seq, |
| " Neighbor last-seen ( throughput) [ IF]\n"); |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) { |
| if (hard_iface->soft_iface != net_dev) |
| continue; |
| |
| hlist_for_each_entry_rcu(hardif_neigh, |
| &hard_iface->neigh_list, list) { |
| batadv_v_hardif_neigh_print(seq, hardif_neigh); |
| batman_count++; |
| } |
| } |
| rcu_read_unlock(); |
| |
| if (batman_count == 0) |
| seq_puts(seq, "No batman nodes in range ...\n"); |
| } |
| #endif |
| |
| /** |
| * batadv_v_neigh_dump_neigh() - Dump a neighbour into a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @hardif_neigh: Neighbour to dump |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int |
| batadv_v_neigh_dump_neigh(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_hardif_neigh_node *hardif_neigh) |
| { |
| void *hdr; |
| unsigned int last_seen_msecs; |
| u32 throughput; |
| |
| last_seen_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen); |
| throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput); |
| throughput = throughput * 100; |
| |
| hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI, |
| BATADV_CMD_GET_NEIGHBORS); |
| if (!hdr) |
| return -ENOBUFS; |
| |
| if (nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN, |
| hardif_neigh->addr) || |
| nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, |
| hardif_neigh->if_incoming->net_dev->ifindex) || |
| nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS, |
| last_seen_msecs) || |
| nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput)) |
| goto nla_put_failure; |
| |
| genlmsg_end(msg, hdr); |
| return 0; |
| |
| nla_put_failure: |
| genlmsg_cancel(msg, hdr); |
| return -EMSGSIZE; |
| } |
| |
| /** |
| * batadv_v_neigh_dump_hardif() - Dump the neighbours of a hard interface into |
| * a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @bat_priv: The bat priv with all the soft interface information |
| * @hard_iface: The hard interface to be dumped |
| * @idx_s: Entries to be skipped |
| * |
| * This function assumes the caller holds rcu_read_lock(). |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int |
| batadv_v_neigh_dump_hardif(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *hard_iface, |
| int *idx_s) |
| { |
| struct batadv_hardif_neigh_node *hardif_neigh; |
| int idx = 0; |
| |
| hlist_for_each_entry_rcu(hardif_neigh, |
| &hard_iface->neigh_list, list) { |
| if (idx++ < *idx_s) |
| continue; |
| |
| if (batadv_v_neigh_dump_neigh(msg, portid, seq, hardif_neigh)) { |
| *idx_s = idx - 1; |
| return -EMSGSIZE; |
| } |
| } |
| |
| *idx_s = 0; |
| return 0; |
| } |
| |
| /** |
| * batadv_v_neigh_dump() - Dump the neighbours of a hard interface into a |
| * message |
| * @msg: Netlink message to dump into |
| * @cb: Control block containing additional options |
| * @bat_priv: The bat priv with all the soft interface information |
| * @single_hardif: Limit dumping to this hard interface |
| */ |
| static void |
| batadv_v_neigh_dump(struct sk_buff *msg, struct netlink_callback *cb, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *single_hardif) |
| { |
| struct batadv_hard_iface *hard_iface; |
| int i_hardif = 0; |
| int i_hardif_s = cb->args[0]; |
| int idx = cb->args[1]; |
| int portid = NETLINK_CB(cb->skb).portid; |
| |
| rcu_read_lock(); |
| if (single_hardif) { |
| if (i_hardif_s == 0) { |
| if (batadv_v_neigh_dump_hardif(msg, portid, |
| cb->nlh->nlmsg_seq, |
| bat_priv, single_hardif, |
| &idx) == 0) |
| i_hardif++; |
| } |
| } else { |
| list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) { |
| if (hard_iface->soft_iface != bat_priv->soft_iface) |
| continue; |
| |
| if (i_hardif++ < i_hardif_s) |
| continue; |
| |
| if (batadv_v_neigh_dump_hardif(msg, portid, |
| cb->nlh->nlmsg_seq, |
| bat_priv, hard_iface, |
| &idx)) { |
| i_hardif--; |
| break; |
| } |
| } |
| } |
| rcu_read_unlock(); |
| |
| cb->args[0] = i_hardif; |
| cb->args[1] = idx; |
| } |
| |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| /** |
| * batadv_v_orig_print() - print the originator table |
| * @bat_priv: the bat priv with all the soft interface information |
| * @seq: debugfs table seq_file struct |
| * @if_outgoing: the outgoing interface for which this should be printed |
| */ |
| static void batadv_v_orig_print(struct batadv_priv *bat_priv, |
| struct seq_file *seq, |
| struct batadv_hard_iface *if_outgoing) |
| { |
| struct batadv_neigh_node *neigh_node; |
| struct batadv_hashtable *hash = bat_priv->orig_hash; |
| int last_seen_msecs, last_seen_secs; |
| struct batadv_orig_node *orig_node; |
| struct batadv_neigh_ifinfo *n_ifinfo; |
| unsigned long last_seen_jiffies; |
| struct hlist_head *head; |
| int batman_count = 0; |
| u32 i; |
| |
| seq_puts(seq, |
| " Originator last-seen ( throughput) Nexthop [outgoingIF]: Potential nexthops ...\n"); |
| |
| for (i = 0; i < hash->size; i++) { |
| head = &hash->table[i]; |
| |
| rcu_read_lock(); |
| hlist_for_each_entry_rcu(orig_node, head, hash_entry) { |
| neigh_node = batadv_orig_router_get(orig_node, |
| if_outgoing); |
| if (!neigh_node) |
| continue; |
| |
| n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, |
| if_outgoing); |
| if (!n_ifinfo) |
| goto next; |
| |
| last_seen_jiffies = jiffies - orig_node->last_seen; |
| last_seen_msecs = jiffies_to_msecs(last_seen_jiffies); |
| last_seen_secs = last_seen_msecs / 1000; |
| last_seen_msecs = last_seen_msecs % 1000; |
| |
| seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:", |
| orig_node->orig, last_seen_secs, |
| last_seen_msecs, |
| n_ifinfo->bat_v.throughput / 10, |
| n_ifinfo->bat_v.throughput % 10, |
| neigh_node->addr, |
| neigh_node->if_incoming->net_dev->name); |
| |
| batadv_v_orig_print_neigh(orig_node, if_outgoing, seq); |
| seq_putc(seq, '\n'); |
| batman_count++; |
| |
| next: |
| batadv_neigh_node_put(neigh_node); |
| if (n_ifinfo) |
| batadv_neigh_ifinfo_put(n_ifinfo); |
| } |
| rcu_read_unlock(); |
| } |
| |
| if (batman_count == 0) |
| seq_puts(seq, "No batman nodes in range ...\n"); |
| } |
| #endif |
| |
| /** |
| * batadv_v_orig_dump_subentry() - Dump an originator subentry into a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @bat_priv: The bat priv with all the soft interface information |
| * @if_outgoing: Limit dump to entries with this outgoing interface |
| * @orig_node: Originator to dump |
| * @neigh_node: Single hops neighbour |
| * @best: Is the best originator |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int |
| batadv_v_orig_dump_subentry(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *if_outgoing, |
| struct batadv_orig_node *orig_node, |
| struct batadv_neigh_node *neigh_node, |
| bool best) |
| { |
| struct batadv_neigh_ifinfo *n_ifinfo; |
| unsigned int last_seen_msecs; |
| u32 throughput; |
| void *hdr; |
| |
| n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing); |
| if (!n_ifinfo) |
| return 0; |
| |
| throughput = n_ifinfo->bat_v.throughput * 100; |
| |
| batadv_neigh_ifinfo_put(n_ifinfo); |
| |
| last_seen_msecs = jiffies_to_msecs(jiffies - orig_node->last_seen); |
| |
| if (if_outgoing != BATADV_IF_DEFAULT && |
| if_outgoing != neigh_node->if_incoming) |
| return 0; |
| |
| hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI, |
| BATADV_CMD_GET_ORIGINATORS); |
| if (!hdr) |
| return -ENOBUFS; |
| |
| if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, orig_node->orig) || |
| nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN, |
| neigh_node->addr) || |
| nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, |
| neigh_node->if_incoming->net_dev->ifindex) || |
| nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput) || |
| nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS, |
| last_seen_msecs)) |
| goto nla_put_failure; |
| |
| if (best && nla_put_flag(msg, BATADV_ATTR_FLAG_BEST)) |
| goto nla_put_failure; |
| |
| genlmsg_end(msg, hdr); |
| return 0; |
| |
| nla_put_failure: |
| genlmsg_cancel(msg, hdr); |
| return -EMSGSIZE; |
| } |
| |
| /** |
| * batadv_v_orig_dump_entry() - Dump an originator entry into a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @bat_priv: The bat priv with all the soft interface information |
| * @if_outgoing: Limit dump to entries with this outgoing interface |
| * @orig_node: Originator to dump |
| * @sub_s: Number of sub entries to skip |
| * |
| * This function assumes the caller holds rcu_read_lock(). |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int |
| batadv_v_orig_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *if_outgoing, |
| struct batadv_orig_node *orig_node, int *sub_s) |
| { |
| struct batadv_neigh_node *neigh_node_best; |
| struct batadv_neigh_node *neigh_node; |
| int sub = 0; |
| bool best; |
| |
| neigh_node_best = batadv_orig_router_get(orig_node, if_outgoing); |
| if (!neigh_node_best) |
| goto out; |
| |
| hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) { |
| if (sub++ < *sub_s) |
| continue; |
| |
| best = (neigh_node == neigh_node_best); |
| |
| if (batadv_v_orig_dump_subentry(msg, portid, seq, bat_priv, |
| if_outgoing, orig_node, |
| neigh_node, best)) { |
| batadv_neigh_node_put(neigh_node_best); |
| |
| *sub_s = sub - 1; |
| return -EMSGSIZE; |
| } |
| } |
| |
| out: |
| if (neigh_node_best) |
| batadv_neigh_node_put(neigh_node_best); |
| |
| *sub_s = 0; |
| return 0; |
| } |
| |
| /** |
| * batadv_v_orig_dump_bucket() - Dump an originator bucket into a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @bat_priv: The bat priv with all the soft interface information |
| * @if_outgoing: Limit dump to entries with this outgoing interface |
| * @head: Bucket to be dumped |
| * @idx_s: Number of entries to be skipped |
| * @sub: Number of sub entries to be skipped |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int |
| batadv_v_orig_dump_bucket(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *if_outgoing, |
| struct hlist_head *head, int *idx_s, int *sub) |
| { |
| struct batadv_orig_node *orig_node; |
| int idx = 0; |
| |
| rcu_read_lock(); |
| hlist_for_each_entry_rcu(orig_node, head, hash_entry) { |
| if (idx++ < *idx_s) |
| continue; |
| |
| if (batadv_v_orig_dump_entry(msg, portid, seq, bat_priv, |
| if_outgoing, orig_node, sub)) { |
| rcu_read_unlock(); |
| *idx_s = idx - 1; |
| return -EMSGSIZE; |
| } |
| } |
| rcu_read_unlock(); |
| |
| *idx_s = 0; |
| *sub = 0; |
| return 0; |
| } |
| |
| /** |
| * batadv_v_orig_dump() - Dump the originators into a message |
| * @msg: Netlink message to dump into |
| * @cb: Control block containing additional options |
| * @bat_priv: The bat priv with all the soft interface information |
| * @if_outgoing: Limit dump to entries with this outgoing interface |
| */ |
| static void |
| batadv_v_orig_dump(struct sk_buff *msg, struct netlink_callback *cb, |
| struct batadv_priv *bat_priv, |
| struct batadv_hard_iface *if_outgoing) |
| { |
| struct batadv_hashtable *hash = bat_priv->orig_hash; |
| struct hlist_head *head; |
| int bucket = cb->args[0]; |
| int idx = cb->args[1]; |
| int sub = cb->args[2]; |
| int portid = NETLINK_CB(cb->skb).portid; |
| |
| while (bucket < hash->size) { |
| head = &hash->table[bucket]; |
| |
| if (batadv_v_orig_dump_bucket(msg, portid, |
| cb->nlh->nlmsg_seq, |
| bat_priv, if_outgoing, head, &idx, |
| &sub)) |
| break; |
| |
| bucket++; |
| } |
| |
| cb->args[0] = bucket; |
| cb->args[1] = idx; |
| cb->args[2] = sub; |
| } |
| |
| static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1, |
| struct batadv_hard_iface *if_outgoing1, |
| struct batadv_neigh_node *neigh2, |
| struct batadv_hard_iface *if_outgoing2) |
| { |
| struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2; |
| int ret = 0; |
| |
| ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); |
| if (!ifinfo1) |
| goto err_ifinfo1; |
| |
| ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); |
| if (!ifinfo2) |
| goto err_ifinfo2; |
| |
| ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput; |
| |
| batadv_neigh_ifinfo_put(ifinfo2); |
| err_ifinfo2: |
| batadv_neigh_ifinfo_put(ifinfo1); |
| err_ifinfo1: |
| return ret; |
| } |
| |
| static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1, |
| struct batadv_hard_iface *if_outgoing1, |
| struct batadv_neigh_node *neigh2, |
| struct batadv_hard_iface *if_outgoing2) |
| { |
| struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2; |
| u32 threshold; |
| bool ret = false; |
| |
| ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); |
| if (!ifinfo1) |
| goto err_ifinfo1; |
| |
| ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); |
| if (!ifinfo2) |
| goto err_ifinfo2; |
| |
| threshold = ifinfo1->bat_v.throughput / 4; |
| threshold = ifinfo1->bat_v.throughput - threshold; |
| |
| ret = ifinfo2->bat_v.throughput > threshold; |
| |
| batadv_neigh_ifinfo_put(ifinfo2); |
| err_ifinfo2: |
| batadv_neigh_ifinfo_put(ifinfo1); |
| err_ifinfo1: |
| return ret; |
| } |
| |
| /** |
| * batadv_v_init_sel_class() - initialize GW selection class |
| * @bat_priv: the bat priv with all the soft interface information |
| */ |
| static void batadv_v_init_sel_class(struct batadv_priv *bat_priv) |
| { |
| /* set default throughput difference threshold to 5Mbps */ |
| atomic_set(&bat_priv->gw.sel_class, 50); |
| } |
| |
| static ssize_t batadv_v_store_sel_class(struct batadv_priv *bat_priv, |
| char *buff, size_t count) |
| { |
| u32 old_class, class; |
| |
| if (!batadv_parse_throughput(bat_priv->soft_iface, buff, |
| "B.A.T.M.A.N. V GW selection class", |
| &class)) |
| return -EINVAL; |
| |
| old_class = atomic_read(&bat_priv->gw.sel_class); |
| atomic_set(&bat_priv->gw.sel_class, class); |
| |
| if (old_class != class) |
| batadv_gw_reselect(bat_priv); |
| |
| return count; |
| } |
| |
| static ssize_t batadv_v_show_sel_class(struct batadv_priv *bat_priv, char *buff) |
| { |
| u32 class = atomic_read(&bat_priv->gw.sel_class); |
| |
| return sprintf(buff, "%u.%u MBit\n", class / 10, class % 10); |
| } |
| |
| /** |
| * batadv_v_gw_throughput_get() - retrieve the GW-bandwidth for a given GW |
| * @gw_node: the GW to retrieve the metric for |
| * @bw: the pointer where the metric will be stored. The metric is computed as |
| * the minimum between the GW advertised throughput and the path throughput to |
| * it in the mesh |
| * |
| * Return: 0 on success, -1 on failure |
| */ |
| static int batadv_v_gw_throughput_get(struct batadv_gw_node *gw_node, u32 *bw) |
| { |
| struct batadv_neigh_ifinfo *router_ifinfo = NULL; |
| struct batadv_orig_node *orig_node; |
| struct batadv_neigh_node *router; |
| int ret = -1; |
| |
| orig_node = gw_node->orig_node; |
| router = batadv_orig_router_get(orig_node, BATADV_IF_DEFAULT); |
| if (!router) |
| goto out; |
| |
| router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT); |
| if (!router_ifinfo) |
| goto out; |
| |
| /* the GW metric is computed as the minimum between the path throughput |
| * to reach the GW itself and the advertised bandwidth. |
| * This gives us an approximation of the effective throughput that the |
| * client can expect via this particular GW node |
| */ |
| *bw = router_ifinfo->bat_v.throughput; |
| *bw = min_t(u32, *bw, gw_node->bandwidth_down); |
| |
| ret = 0; |
| out: |
| if (router) |
| batadv_neigh_node_put(router); |
| if (router_ifinfo) |
| batadv_neigh_ifinfo_put(router_ifinfo); |
| |
| return ret; |
| } |
| |
| /** |
| * batadv_v_gw_get_best_gw_node() - retrieve the best GW node |
| * @bat_priv: the bat priv with all the soft interface information |
| * |
| * Return: the GW node having the best GW-metric, NULL if no GW is known |
| */ |
| static struct batadv_gw_node * |
| batadv_v_gw_get_best_gw_node(struct batadv_priv *bat_priv) |
| { |
| struct batadv_gw_node *gw_node, *curr_gw = NULL; |
| u32 max_bw = 0, bw; |
| |
| rcu_read_lock(); |
| hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) { |
| if (!kref_get_unless_zero(&gw_node->refcount)) |
| continue; |
| |
| if (batadv_v_gw_throughput_get(gw_node, &bw) < 0) |
| goto next; |
| |
| if (curr_gw && bw <= max_bw) |
| goto next; |
| |
| if (curr_gw) |
| batadv_gw_node_put(curr_gw); |
| |
| curr_gw = gw_node; |
| kref_get(&curr_gw->refcount); |
| max_bw = bw; |
| |
| next: |
| batadv_gw_node_put(gw_node); |
| } |
| rcu_read_unlock(); |
| |
| return curr_gw; |
| } |
| |
| /** |
| * batadv_v_gw_is_eligible() - check if a originator would be selected as GW |
| * @bat_priv: the bat priv with all the soft interface information |
| * @curr_gw_orig: originator representing the currently selected GW |
| * @orig_node: the originator representing the new candidate |
| * |
| * Return: true if orig_node can be selected as current GW, false otherwise |
| */ |
| static bool batadv_v_gw_is_eligible(struct batadv_priv *bat_priv, |
| struct batadv_orig_node *curr_gw_orig, |
| struct batadv_orig_node *orig_node) |
| { |
| struct batadv_gw_node *curr_gw, *orig_gw = NULL; |
| u32 gw_throughput, orig_throughput, threshold; |
| bool ret = false; |
| |
| threshold = atomic_read(&bat_priv->gw.sel_class); |
| |
| curr_gw = batadv_gw_node_get(bat_priv, curr_gw_orig); |
| if (!curr_gw) { |
| ret = true; |
| goto out; |
| } |
| |
| if (batadv_v_gw_throughput_get(curr_gw, &gw_throughput) < 0) { |
| ret = true; |
| goto out; |
| } |
| |
| orig_gw = batadv_gw_node_get(bat_priv, orig_node); |
| if (!orig_gw) |
| goto out; |
| |
| if (batadv_v_gw_throughput_get(orig_gw, &orig_throughput) < 0) |
| goto out; |
| |
| if (orig_throughput < gw_throughput) |
| goto out; |
| |
| if ((orig_throughput - gw_throughput) < threshold) |
| goto out; |
| |
| batadv_dbg(BATADV_DBG_BATMAN, bat_priv, |
| "Restarting gateway selection: better gateway found (throughput curr: %u, throughput new: %u)\n", |
| gw_throughput, orig_throughput); |
| |
| ret = true; |
| out: |
| if (curr_gw) |
| batadv_gw_node_put(curr_gw); |
| if (orig_gw) |
| batadv_gw_node_put(orig_gw); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| /* fails if orig_node has no router */ |
| static int batadv_v_gw_write_buffer_text(struct batadv_priv *bat_priv, |
| struct seq_file *seq, |
| const struct batadv_gw_node *gw_node) |
| { |
| struct batadv_gw_node *curr_gw; |
| struct batadv_neigh_node *router; |
| struct batadv_neigh_ifinfo *router_ifinfo = NULL; |
| int ret = -1; |
| |
| router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT); |
| if (!router) |
| goto out; |
| |
| router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT); |
| if (!router_ifinfo) |
| goto out; |
| |
| curr_gw = batadv_gw_get_selected_gw_node(bat_priv); |
| |
| seq_printf(seq, "%s %pM (%9u.%1u) %pM [%10s]: %u.%u/%u.%u MBit\n", |
| (curr_gw == gw_node ? "=>" : " "), |
| gw_node->orig_node->orig, |
| router_ifinfo->bat_v.throughput / 10, |
| router_ifinfo->bat_v.throughput % 10, router->addr, |
| router->if_incoming->net_dev->name, |
| gw_node->bandwidth_down / 10, |
| gw_node->bandwidth_down % 10, |
| gw_node->bandwidth_up / 10, |
| gw_node->bandwidth_up % 10); |
| ret = seq_has_overflowed(seq) ? -1 : 0; |
| |
| if (curr_gw) |
| batadv_gw_node_put(curr_gw); |
| out: |
| if (router_ifinfo) |
| batadv_neigh_ifinfo_put(router_ifinfo); |
| if (router) |
| batadv_neigh_node_put(router); |
| return ret; |
| } |
| |
| /** |
| * batadv_v_gw_print() - print the gateway list |
| * @bat_priv: the bat priv with all the soft interface information |
| * @seq: gateway table seq_file struct |
| */ |
| static void batadv_v_gw_print(struct batadv_priv *bat_priv, |
| struct seq_file *seq) |
| { |
| struct batadv_gw_node *gw_node; |
| int gw_count = 0; |
| |
| seq_puts(seq, |
| " Gateway ( throughput) Nexthop [outgoingIF]: advertised uplink bandwidth\n"); |
| |
| rcu_read_lock(); |
| hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) { |
| /* fails if orig_node has no router */ |
| if (batadv_v_gw_write_buffer_text(bat_priv, seq, gw_node) < 0) |
| continue; |
| |
| gw_count++; |
| } |
| rcu_read_unlock(); |
| |
| if (gw_count == 0) |
| seq_puts(seq, "No gateways in range ...\n"); |
| } |
| #endif |
| |
| /** |
| * batadv_v_gw_dump_entry() - Dump a gateway into a message |
| * @msg: Netlink message to dump into |
| * @portid: Port making netlink request |
| * @seq: Sequence number of netlink message |
| * @bat_priv: The bat priv with all the soft interface information |
| * @gw_node: Gateway to be dumped |
| * |
| * Return: Error code, or 0 on success |
| */ |
| static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, |
| struct batadv_priv *bat_priv, |
| struct batadv_gw_node *gw_node) |
| { |
| struct batadv_neigh_ifinfo *router_ifinfo = NULL; |
| struct batadv_neigh_node *router; |
| struct batadv_gw_node *curr_gw; |
| int ret = -EINVAL; |
| void *hdr; |
| |
| router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT); |
| if (!router) |
| goto out; |
| |
| router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT); |
| if (!router_ifinfo) |
| goto out; |
| |
| curr_gw = batadv_gw_get_selected_gw_node(bat_priv); |
| |
| hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, |
| NLM_F_MULTI, BATADV_CMD_GET_GATEWAYS); |
| if (!hdr) { |
| ret = -ENOBUFS; |
| goto out; |
| } |
| |
| ret = -EMSGSIZE; |
| |
| if (curr_gw == gw_node) { |
| if (nla_put_flag(msg, BATADV_ATTR_FLAG_BEST)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| } |
| |
| if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, |
| gw_node->orig_node->orig)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, |
| router_ifinfo->bat_v.throughput)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| if (nla_put(msg, BATADV_ATTR_ROUTER, ETH_ALEN, router->addr)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| if (nla_put_string(msg, BATADV_ATTR_HARD_IFNAME, |
| router->if_incoming->net_dev->name)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_DOWN, |
| gw_node->bandwidth_down)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_UP, gw_node->bandwidth_up)) { |
| genlmsg_cancel(msg, hdr); |
| goto out; |
| } |
| |
| genlmsg_end(msg, hdr); |
| ret = 0; |
| |
| out: |
| if (router_ifinfo) |
| batadv_neigh_ifinfo_put(router_ifinfo); |
| if (router) |
| batadv_neigh_node_put(router); |
| return ret; |
| } |
| |
| /** |
| * batadv_v_gw_dump() - Dump gateways into a message |
| * @msg: Netlink message to dump into |
| * @cb: Control block containing additional options |
| * @bat_priv: The bat priv with all the soft interface information |
| */ |
| static void batadv_v_gw_dump(struct sk_buff *msg, struct netlink_callback *cb, |
| struct batadv_priv *bat_priv) |
| { |
| int portid = NETLINK_CB(cb->skb).portid; |
| struct batadv_gw_node *gw_node; |
| int idx_skip = cb->args[0]; |
| int idx = 0; |
| |
| rcu_read_lock(); |
| hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) { |
| if (idx++ < idx_skip) |
| continue; |
| |
| if (batadv_v_gw_dump_entry(msg, portid, cb->nlh->nlmsg_seq, |
| bat_priv, gw_node)) { |
| idx_skip = idx - 1; |
| goto unlock; |
| } |
| } |
| |
| idx_skip = idx; |
| unlock: |
| rcu_read_unlock(); |
| |
| cb->args[0] = idx_skip; |
| } |
| |
| static struct batadv_algo_ops batadv_batman_v __read_mostly = { |
| .name = "BATMAN_V", |
| .iface = { |
| .activate = batadv_v_iface_activate, |
| .enable = batadv_v_iface_enable, |
| .disable = batadv_v_iface_disable, |
| .update_mac = batadv_v_iface_update_mac, |
| .primary_set = batadv_v_primary_iface_set, |
| }, |
| .neigh = { |
| .hardif_init = batadv_v_hardif_neigh_init, |
| .cmp = batadv_v_neigh_cmp, |
| .is_similar_or_better = batadv_v_neigh_is_sob, |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| .print = batadv_v_neigh_print, |
| #endif |
| .dump = batadv_v_neigh_dump, |
| }, |
| .orig = { |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| .print = batadv_v_orig_print, |
| #endif |
| .dump = batadv_v_orig_dump, |
| }, |
| .gw = { |
| .init_sel_class = batadv_v_init_sel_class, |
| .store_sel_class = batadv_v_store_sel_class, |
| .show_sel_class = batadv_v_show_sel_class, |
| .get_best_gw_node = batadv_v_gw_get_best_gw_node, |
| .is_eligible = batadv_v_gw_is_eligible, |
| #ifdef CONFIG_BATMAN_ADV_DEBUGFS |
| .print = batadv_v_gw_print, |
| #endif |
| .dump = batadv_v_gw_dump, |
| }, |
| }; |
| |
| /** |
| * batadv_v_hardif_init() - initialize the algorithm specific fields in the |
| * hard-interface object |
| * @hard_iface: the hard-interface to initialize |
| */ |
| void batadv_v_hardif_init(struct batadv_hard_iface *hard_iface) |
| { |
| /* enable link throughput auto-detection by setting the throughput |
| * override to zero |
| */ |
| atomic_set(&hard_iface->bat_v.throughput_override, 0); |
| atomic_set(&hard_iface->bat_v.elp_interval, 500); |
| } |
| |
| /** |
| * batadv_v_mesh_init() - initialize the B.A.T.M.A.N. V private resources for a |
| * mesh |
| * @bat_priv: the object representing the mesh interface to initialise |
| * |
| * Return: 0 on success or a negative error code otherwise |
| */ |
| int batadv_v_mesh_init(struct batadv_priv *bat_priv) |
| { |
| int ret = 0; |
| |
| ret = batadv_v_ogm_init(bat_priv); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * batadv_v_mesh_free() - free the B.A.T.M.A.N. V private resources for a mesh |
| * @bat_priv: the object representing the mesh interface to free |
| */ |
| void batadv_v_mesh_free(struct batadv_priv *bat_priv) |
| { |
| batadv_v_ogm_free(bat_priv); |
| } |
| |
| /** |
| * batadv_v_init() - B.A.T.M.A.N. V initialization function |
| * |
| * Description: Takes care of initializing all the subcomponents. |
| * It is invoked upon module load only. |
| * |
| * Return: 0 on success or a negative error code otherwise |
| */ |
| int __init batadv_v_init(void) |
| { |
| int ret; |
| |
| /* B.A.T.M.A.N. V echo location protocol packet */ |
| ret = batadv_recv_handler_register(BATADV_ELP, |
| batadv_v_elp_packet_recv); |
| if (ret < 0) |
| return ret; |
| |
| ret = batadv_recv_handler_register(BATADV_OGM2, |
| batadv_v_ogm_packet_recv); |
| if (ret < 0) |
| goto elp_unregister; |
| |
| ret = batadv_algo_register(&batadv_batman_v); |
| if (ret < 0) |
| goto ogm_unregister; |
| |
| return ret; |
| |
| ogm_unregister: |
| batadv_recv_handler_unregister(BATADV_OGM2); |
| |
| elp_unregister: |
| batadv_recv_handler_unregister(BATADV_ELP); |
| |
| return ret; |
| } |