arch/powerpc/boot/dts/mpc834x_mds.dts - linux - Git at Google

 /*
  * MPC8349E MDS Device Tree Source
  *
  * Copyright 2005, 2006 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */

 /dts-v1/;

 / {
 	model = "MPC8349EMDS";
 	compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;

 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
 	};

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		PowerPC,8349@0 {
 			device_type = "cpu";
 			reg = <0x0>;
 			d-cache-line-size = <32>;
 			i-cache-line-size = <32>;
 			d-cache-size = <32768>;
 			i-cache-size = <32768>;
 			timebase-frequency = <0>;	// from bootloader
 			bus-frequency = <0>;		// from bootloader
 			clock-frequency = <0>;		// from bootloader
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x10000000>;	// 256MB at 0
 	};

 	bcsr@e2400000 {
 		device_type = "board-control";
 		reg = <0xe2400000 0x8000>;
 	};

 	soc8349@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;

 		wdt@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
 		};

 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;

 			rtc@68 {
 				compatible = "dallas,ds1374";
 				reg = <0x68>;
 			};
 		};

 		i2c@3100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <0x3100 0x100>;
 			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
 		};

 		spi@7000 {
 			cell-index = <0>;
 			compatible = "fsl,spi";
 			reg = <0x7000 0x1000>;
 			interrupts = <16 0x8>;
 			interrupt-parent = <&ipic>;
 			mode = "cpu";
 		};

 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x22000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <39 0x8>;
 			phy_type = "ulpi";
 			port1;
 		};
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
 		};

 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
 			reg = <0x24520 0x20>;

 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&ipic>;
 				interrupts = <17 0x8>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&ipic>;
 				interrupts = <18 0x8>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};

 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = <&phy0>;
 			linux,network-index = <0>;
 		};

 		enet1: ethernet@25000 {
 			cell-index = <1>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = <&phy1>;
 			linux,network-index = <1>;
 		};

 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
 			interrupt-parent = <&ipic>;
 		};

 		serial1: serial@4600 {
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
 			interrupt-parent = <&ipic>;
 		};

 		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
 			num-channels = <4>;
 			channel-fifo-len = <24>;
 			exec-units-mask = <0x0000007e>;
 			/* desc mask is for rev2.0,
 			 * we need runtime fixup for >2.0 */
 			descriptor-types-mask = <0x01010ebf>;
 		};

 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
 		 * sense == 8: Level, low assertion
 		 * sense == 2: Edge, high-to-low change
 		 */
 		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
 	};

 	pci0: pci@e0008500 {
 		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <

 				/* IDSEL 0x11 */
 				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
 				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
 				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
 				 0x8800 0x0 0x0 0x4 &ipic 23 0x8

 				/* IDSEL 0x12 */
 				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
 				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
 				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
 				 0x9000 0x0 0x0 0x4 &ipic 21 0x8

 				/* IDSEL 0x13 */
 				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
 				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
 				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
 				 0x9800 0x0 0x0 0x4 &ipic 22 0x8

 				/* IDSEL 0x15 */
 				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
 				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
 				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
 				 0xa800 0x0 0x0 0x4 &ipic 23 0x8

 				/* IDSEL 0x16 */
 				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
 				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
 				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
 				 0xb000 0x0 0x0 0x4 &ipic 22 0x8

 				/* IDSEL 0x17 */
 				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
 				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
 				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
 				 0xb800 0x0 0x0 0x4 &ipic 21 0x8

 				/* IDSEL 0x18 */
 				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
 				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
 				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
 				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
 		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		reg = <0xe0008500 0x100>;
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};

 	pci1: pci@e0008600 {
 		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <

 				/* IDSEL 0x11 */
 				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
 				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
 				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
 				 0x8800 0x0 0x0 0x4 &ipic 23 0x8

 				/* IDSEL 0x12 */
 				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
 				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
 				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
 				 0x9000 0x0 0x0 0x4 &ipic 21 0x8

 				/* IDSEL 0x13 */
 				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
 				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
 				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
 				 0x9800 0x0 0x0 0x4 &ipic 22 0x8

 				/* IDSEL 0x15 */
 				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
 				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
 				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
 				 0xa800 0x0 0x0 0x4 &ipic 23 0x8

 				/* IDSEL 0x16 */
 				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
 				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
 				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
 				 0xb000 0x0 0x0 0x4 &ipic 22 0x8

 				/* IDSEL 0x17 */
 				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
 				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
 				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
 				 0xb800 0x0 0x0 0x4 &ipic 21 0x8

 				/* IDSEL 0x18 */
 				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
 				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
 				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
 				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
 		interrupt-parent = <&ipic>;
 		interrupts = <67 0x8>;
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
 			  0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		reg = <0xe0008600 0x100>;
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
 };
	/*
	* MPC8349E MDS Device Tree Source
	*
	* Copyright 2005, 2006 Freescale Semiconductor Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/

	/dts-v1/;

	/ {
	model = "MPC8349EMDS";
	compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
	ethernet0 = &enet0;
	ethernet1 = &enet1;
	serial0 = &serial0;
	serial1 = &serial1;
	pci0 = &pci0;
	pci1 = &pci1;
	};

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;

	PowerPC,8349@0 {
	device_type = "cpu";
	reg = <0x0>;
	d-cache-line-size = <32>;
	i-cache-line-size = <32>;
	d-cache-size = <32768>;
	i-cache-size = <32768>;
	timebase-frequency = <0>; // from bootloader
	bus-frequency = <0>; // from bootloader
	clock-frequency = <0>; // from bootloader
	};
	};

	memory {
	device_type = "memory";
	reg = <0x00000000 0x10000000>; // 256MB at 0
	};

	bcsr@e2400000 {
	device_type = "board-control";
	reg = <0xe2400000 0x8000>;
	};

	soc8349@e0000000 {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	ranges = <0x0 0xe0000000 0x00100000>;
	reg = <0xe0000000 0x00000200>;
	bus-frequency = <0>;

	wdt@200 {
	device_type = "watchdog";
	compatible = "mpc83xx_wdt";
	reg = <0x200 0x100>;
	};

	i2c@3000 {
	#address-cells = <1>;
	#size-cells = <0>;
	cell-index = <0>;
	compatible = "fsl-i2c";
	reg = <0x3000 0x100>;
	interrupts = <14 0x8>;
	interrupt-parent = <&ipic>;
	dfsrr;

	rtc@68 {
	compatible = "dallas,ds1374";
	reg = <0x68>;
	};
	};

	i2c@3100 {
	#address-cells = <1>;
	#size-cells = <0>;
	cell-index = <1>;
	compatible = "fsl-i2c";
	reg = <0x3100 0x100>;
	interrupts = <15 0x8>;
	interrupt-parent = <&ipic>;
	dfsrr;
	};

	spi@7000 {
	cell-index = <0>;
	compatible = "fsl,spi";
	reg = <0x7000 0x1000>;
	interrupts = <16 0x8>;
	interrupt-parent = <&ipic>;
	mode = "cpu";
	};

	/* phy type (ULPI or SERIAL) are only types supported for MPH */
	/* port = 0 or 1 */
	usb@22000 {
	compatible = "fsl-usb2-mph";
	reg = <0x22000 0x1000>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-parent = <&ipic>;
	interrupts = <39 0x8>;
	phy_type = "ulpi";
	port1;
	};
	/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
	usb@23000 {
	compatible = "fsl-usb2-dr";
	reg = <0x23000 0x1000>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-parent = <&ipic>;
	interrupts = <38 0x8>;
	dr_mode = "otg";
	phy_type = "ulpi";
	};

	mdio@24520 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "fsl,gianfar-mdio";
	reg = <0x24520 0x20>;

	phy0: ethernet-phy@0 {
	interrupt-parent = <&ipic>;
	interrupts = <17 0x8>;
	reg = <0x0>;
	device_type = "ethernet-phy";
	};
	phy1: ethernet-phy@1 {
	interrupt-parent = <&ipic>;
	interrupts = <18 0x8>;
	reg = <0x1>;
	device_type = "ethernet-phy";
	};
	};

	enet0: ethernet@24000 {
	cell-index = <0>;
	device_type = "network";
	model = "TSEC";
	compatible = "gianfar";
	reg = <0x24000 0x1000>;
	local-mac-address = [ 00 00 00 00 00 00 ];
	interrupts = <32 0x8 33 0x8 34 0x8>;
	interrupt-parent = <&ipic>;
	phy-handle = <&phy0>;
	linux,network-index = <0>;
	};

	enet1: ethernet@25000 {
	cell-index = <1>;
	device_type = "network";
	model = "TSEC";
	compatible = "gianfar";
	reg = <0x25000 0x1000>;
	local-mac-address = [ 00 00 00 00 00 00 ];
	interrupts = <35 0x8 36 0x8 37 0x8>;
	interrupt-parent = <&ipic>;
	phy-handle = <&phy1>;
	linux,network-index = <1>;
	};

	serial0: serial@4500 {
	cell-index = <0>;
	device_type = "serial";
	compatible = "ns16550";
	reg = <0x4500 0x100>;
	clock-frequency = <0>;
	interrupts = <9 0x8>;
	interrupt-parent = <&ipic>;
	};

	serial1: serial@4600 {
	cell-index = <1>;
	device_type = "serial";
	compatible = "ns16550";
	reg = <0x4600 0x100>;
	clock-frequency = <0>;
	interrupts = <10 0x8>;
	interrupt-parent = <&ipic>;
	};

	/* May need to remove if on a part without crypto engine */
	crypto@30000 {
	device_type = "crypto";
	model = "SEC2";
	compatible = "talitos";
	reg = <0x30000 0x10000>;
	interrupts = <11 0x8>;
	interrupt-parent = <&ipic>;
	num-channels = <4>;
	channel-fifo-len = <24>;
	exec-units-mask = <0x0000007e>;
	/* desc mask is for rev2.0,
	* we need runtime fixup for >2.0 */
	descriptor-types-mask = <0x01010ebf>;
	};

	/* IPIC
	* interrupts cell = <intr #, sense>
	* sense values match linux IORESOURCE_IRQ_* defines:
	* sense == 8: Level, low assertion
	* sense == 2: Edge, high-to-low change
	*/
	ipic: pic@700 {
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <2>;
	reg = <0x700 0x100>;
	device_type = "ipic";
	};
	};

	pci0: pci@e0008500 {
	cell-index = <1>;
	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
	interrupt-map = <

	/* IDSEL 0x11 */
	0x8800 0x0 0x0 0x1 &ipic 20 0x8
	0x8800 0x0 0x0 0x2 &ipic 21 0x8
	0x8800 0x0 0x0 0x3 &ipic 22 0x8
	0x8800 0x0 0x0 0x4 &ipic 23 0x8

	/* IDSEL 0x12 */
	0x9000 0x0 0x0 0x1 &ipic 22 0x8
	0x9000 0x0 0x0 0x2 &ipic 23 0x8
	0x9000 0x0 0x0 0x3 &ipic 20 0x8
	0x9000 0x0 0x0 0x4 &ipic 21 0x8

	/* IDSEL 0x13 */
	0x9800 0x0 0x0 0x1 &ipic 23 0x8
	0x9800 0x0 0x0 0x2 &ipic 20 0x8
	0x9800 0x0 0x0 0x3 &ipic 21 0x8
	0x9800 0x0 0x0 0x4 &ipic 22 0x8

	/* IDSEL 0x15 */
	0xa800 0x0 0x0 0x1 &ipic 20 0x8
	0xa800 0x0 0x0 0x2 &ipic 21 0x8
	0xa800 0x0 0x0 0x3 &ipic 22 0x8
	0xa800 0x0 0x0 0x4 &ipic 23 0x8

	/* IDSEL 0x16 */
	0xb000 0x0 0x0 0x1 &ipic 23 0x8
	0xb000 0x0 0x0 0x2 &ipic 20 0x8
	0xb000 0x0 0x0 0x3 &ipic 21 0x8
	0xb000 0x0 0x0 0x4 &ipic 22 0x8

	/* IDSEL 0x17 */
	0xb800 0x0 0x0 0x1 &ipic 22 0x8
	0xb800 0x0 0x0 0x2 &ipic 23 0x8
	0xb800 0x0 0x0 0x3 &ipic 20 0x8
	0xb800 0x0 0x0 0x4 &ipic 21 0x8

	/* IDSEL 0x18 */
	0xc000 0x0 0x0 0x1 &ipic 21 0x8
	0xc000 0x0 0x0 0x2 &ipic 22 0x8
	0xc000 0x0 0x0 0x3 &ipic 23 0x8
	0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
	interrupt-parent = <&ipic>;
	interrupts = <66 0x8>;
	bus-range = <0 0>;
	ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
	0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
	0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
	clock-frequency = <66666666>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	reg = <0xe0008500 0x100>;
	compatible = "fsl,mpc8349-pci";
	device_type = "pci";
	};

	pci1: pci@e0008600 {
	cell-index = <2>;
	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
	interrupt-map = <

	/* IDSEL 0x11 */
	0x8800 0x0 0x0 0x1 &ipic 20 0x8
	0x8800 0x0 0x0 0x2 &ipic 21 0x8
	0x8800 0x0 0x0 0x3 &ipic 22 0x8
	0x8800 0x0 0x0 0x4 &ipic 23 0x8

	/* IDSEL 0x12 */
	0x9000 0x0 0x0 0x1 &ipic 22 0x8
	0x9000 0x0 0x0 0x2 &ipic 23 0x8
	0x9000 0x0 0x0 0x3 &ipic 20 0x8
	0x9000 0x0 0x0 0x4 &ipic 21 0x8

	/* IDSEL 0x13 */
	0x9800 0x0 0x0 0x1 &ipic 23 0x8
	0x9800 0x0 0x0 0x2 &ipic 20 0x8
	0x9800 0x0 0x0 0x3 &ipic 21 0x8
	0x9800 0x0 0x0 0x4 &ipic 22 0x8

	/* IDSEL 0x15 */
	0xa800 0x0 0x0 0x1 &ipic 20 0x8
	0xa800 0x0 0x0 0x2 &ipic 21 0x8
	0xa800 0x0 0x0 0x3 &ipic 22 0x8
	0xa800 0x0 0x0 0x4 &ipic 23 0x8

	/* IDSEL 0x16 */
	0xb000 0x0 0x0 0x1 &ipic 23 0x8
	0xb000 0x0 0x0 0x2 &ipic 20 0x8
	0xb000 0x0 0x0 0x3 &ipic 21 0x8
	0xb000 0x0 0x0 0x4 &ipic 22 0x8

	/* IDSEL 0x17 */
	0xb800 0x0 0x0 0x1 &ipic 22 0x8
	0xb800 0x0 0x0 0x2 &ipic 23 0x8
	0xb800 0x0 0x0 0x3 &ipic 20 0x8
	0xb800 0x0 0x0 0x4 &ipic 21 0x8

	/* IDSEL 0x18 */
	0xc000 0x0 0x0 0x1 &ipic 21 0x8
	0xc000 0x0 0x0 0x2 &ipic 22 0x8
	0xc000 0x0 0x0 0x3 &ipic 23 0x8
	0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
	interrupt-parent = <&ipic>;
	interrupts = <67 0x8>;
	bus-range = <0 0>;
	ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
	0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
	0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
	clock-frequency = <66666666>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	reg = <0xe0008600 0x100>;
	compatible = "fsl,mpc8349-pci";
	device_type = "pci";
	};
	};