| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs |
| * |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson |
| * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes |
| * 2000-2002 x86-64 support by Andi Kleen |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/ptrace.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/personality.h> |
| #include <linux/compiler.h> |
| #include <asm/ucontext.h> |
| #include <asm/uaccess.h> |
| #include <asm/i387.h> |
| #include <asm/proto.h> |
| #include <asm/ia32_unistd.h> |
| #include <asm/mce.h> |
| |
| /* #define DEBUG_SIG 1 */ |
| |
| #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
| |
| int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, |
| sigset_t *set, struct pt_regs * regs); |
| int ia32_setup_frame(int sig, struct k_sigaction *ka, |
| sigset_t *set, struct pt_regs * regs); |
| |
| asmlinkage long |
| sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, |
| struct pt_regs *regs) |
| { |
| return do_sigaltstack(uss, uoss, regs->sp); |
| } |
| |
| |
| /* |
| * Do a signal return; undo the signal stack. |
| */ |
| |
| struct rt_sigframe |
| { |
| char __user *pretcode; |
| struct ucontext uc; |
| struct siginfo info; |
| }; |
| |
| static int |
| restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax) |
| { |
| unsigned int err = 0; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| #define COPY(x) err |= __get_user(regs->x, &sc->x) |
| |
| COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); |
| COPY(dx); COPY(cx); COPY(ip); |
| COPY(r8); |
| COPY(r9); |
| COPY(r10); |
| COPY(r11); |
| COPY(r12); |
| COPY(r13); |
| COPY(r14); |
| COPY(r15); |
| |
| /* Kernel saves and restores only the CS segment register on signals, |
| * which is the bare minimum needed to allow mixed 32/64-bit code. |
| * App's signal handler can save/restore other segments if needed. */ |
| { |
| unsigned cs; |
| err |= __get_user(cs, &sc->cs); |
| regs->cs = cs | 3; /* Force into user mode */ |
| } |
| |
| { |
| unsigned int tmpflags; |
| err |= __get_user(tmpflags, &sc->flags); |
| regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5); |
| regs->orig_ax = -1; /* disable syscall checks */ |
| } |
| |
| { |
| struct _fpstate __user * buf; |
| err |= __get_user(buf, &sc->fpstate); |
| |
| if (buf) { |
| if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) |
| goto badframe; |
| err |= restore_i387(buf); |
| } else { |
| struct task_struct *me = current; |
| if (used_math()) { |
| clear_fpu(me); |
| clear_used_math(); |
| } |
| } |
| } |
| |
| err |= __get_user(*prax, &sc->ax); |
| return err; |
| |
| badframe: |
| return 1; |
| } |
| |
| asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) |
| { |
| struct rt_sigframe __user *frame; |
| sigset_t set; |
| unsigned long ax; |
| |
| frame = (struct rt_sigframe __user *)(regs->sp - 8); |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) { |
| goto badframe; |
| } |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) { |
| goto badframe; |
| } |
| |
| sigdelsetmask(&set, ~_BLOCKABLE); |
| spin_lock_irq(¤t->sighand->siglock); |
| current->blocked = set; |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax)) |
| goto badframe; |
| |
| #ifdef DEBUG_SIG |
| printk("%d sigreturn ip:%lx sp:%lx frame:%p ax:%lx\n",current->pid,regs->ip,regs->sp,frame,ax); |
| #endif |
| |
| if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT) |
| goto badframe; |
| |
| return ax; |
| |
| badframe: |
| signal_fault(regs,frame,"sigreturn"); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| static inline int |
| setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me) |
| { |
| int err = 0; |
| |
| err |= __put_user(regs->cs, &sc->cs); |
| err |= __put_user(0, &sc->gs); |
| err |= __put_user(0, &sc->fs); |
| |
| err |= __put_user(regs->di, &sc->di); |
| err |= __put_user(regs->si, &sc->si); |
| err |= __put_user(regs->bp, &sc->bp); |
| err |= __put_user(regs->sp, &sc->sp); |
| err |= __put_user(regs->bx, &sc->bx); |
| err |= __put_user(regs->dx, &sc->dx); |
| err |= __put_user(regs->cx, &sc->cx); |
| err |= __put_user(regs->ax, &sc->ax); |
| err |= __put_user(regs->r8, &sc->r8); |
| err |= __put_user(regs->r9, &sc->r9); |
| err |= __put_user(regs->r10, &sc->r10); |
| err |= __put_user(regs->r11, &sc->r11); |
| err |= __put_user(regs->r12, &sc->r12); |
| err |= __put_user(regs->r13, &sc->r13); |
| err |= __put_user(regs->r14, &sc->r14); |
| err |= __put_user(regs->r15, &sc->r15); |
| err |= __put_user(me->thread.trap_no, &sc->trapno); |
| err |= __put_user(me->thread.error_code, &sc->err); |
| err |= __put_user(regs->ip, &sc->ip); |
| err |= __put_user(regs->flags, &sc->flags); |
| err |= __put_user(mask, &sc->oldmask); |
| err |= __put_user(me->thread.cr2, &sc->cr2); |
| |
| return err; |
| } |
| |
| /* |
| * Determine which stack to use.. |
| */ |
| |
| static void __user * |
| get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) |
| { |
| unsigned long sp; |
| |
| /* Default to using normal stack - redzone*/ |
| sp = regs->sp - 128; |
| |
| /* This is the X/Open sanctioned signal stack switching. */ |
| if (ka->sa.sa_flags & SA_ONSTACK) { |
| if (sas_ss_flags(sp) == 0) |
| sp = current->sas_ss_sp + current->sas_ss_size; |
| } |
| |
| return (void __user *)round_down(sp - size, 16); |
| } |
| |
| static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, |
| sigset_t *set, struct pt_regs * regs) |
| { |
| struct rt_sigframe __user *frame; |
| struct _fpstate __user *fp = NULL; |
| int err = 0; |
| struct task_struct *me = current; |
| |
| if (used_math()) { |
| fp = get_stack(ka, regs, sizeof(struct _fpstate)); |
| frame = (void __user *)round_down( |
| (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; |
| |
| if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) |
| goto give_sigsegv; |
| |
| if (save_i387(fp) < 0) |
| err |= -1; |
| } else |
| frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; |
| |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) |
| goto give_sigsegv; |
| |
| if (ka->sa.sa_flags & SA_SIGINFO) { |
| err |= copy_siginfo_to_user(&frame->info, info); |
| if (err) |
| goto give_sigsegv; |
| } |
| |
| /* Create the ucontext. */ |
| err |= __put_user(0, &frame->uc.uc_flags); |
| err |= __put_user(0, &frame->uc.uc_link); |
| err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); |
| err |= __put_user(sas_ss_flags(regs->sp), |
| &frame->uc.uc_stack.ss_flags); |
| err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); |
| err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me); |
| err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); |
| if (sizeof(*set) == 16) { |
| __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); |
| __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); |
| } else |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. */ |
| /* x86-64 should always use SA_RESTORER. */ |
| if (ka->sa.sa_flags & SA_RESTORER) { |
| err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); |
| } else { |
| /* could use a vstub here */ |
| goto give_sigsegv; |
| } |
| |
| if (err) |
| goto give_sigsegv; |
| |
| #ifdef DEBUG_SIG |
| printk("%d old ip %lx old sp %lx old ax %lx\n", current->pid,regs->ip,regs->sp,regs->ax); |
| #endif |
| |
| /* Set up registers for signal handler */ |
| regs->di = sig; |
| /* In case the signal handler was declared without prototypes */ |
| regs->ax = 0; |
| |
| /* This also works for non SA_SIGINFO handlers because they expect the |
| next argument after the signal number on the stack. */ |
| regs->si = (unsigned long)&frame->info; |
| regs->dx = (unsigned long)&frame->uc; |
| regs->ip = (unsigned long) ka->sa.sa_handler; |
| |
| regs->sp = (unsigned long)frame; |
| |
| /* Set up the CS register to run signal handlers in 64-bit mode, |
| even if the handler happens to be interrupting 32-bit code. */ |
| regs->cs = __USER_CS; |
| |
| /* This, by contrast, has nothing to do with segment registers - |
| see include/asm-x86_64/uaccess.h for details. */ |
| set_fs(USER_DS); |
| |
| regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF); |
| if (test_thread_flag(TIF_SINGLESTEP)) |
| ptrace_notify(SIGTRAP); |
| #ifdef DEBUG_SIG |
| printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n", |
| current->comm, current->pid, frame, regs->ip, frame->pretcode); |
| #endif |
| |
| return 0; |
| |
| give_sigsegv: |
| force_sigsegv(sig, current); |
| return -EFAULT; |
| } |
| |
| /* |
| * Return -1L or the syscall number that @regs is executing. |
| */ |
| static long current_syscall(struct pt_regs *regs) |
| { |
| /* |
| * We always sign-extend a -1 value being set here, |
| * so this is always either -1L or a syscall number. |
| */ |
| return regs->orig_ax; |
| } |
| |
| /* |
| * Return a value that is -EFOO if the system call in @regs->orig_ax |
| * returned an error. This only works for @regs from @current. |
| */ |
| static long current_syscall_ret(struct pt_regs *regs) |
| { |
| #ifdef CONFIG_IA32_EMULATION |
| if (test_thread_flag(TIF_IA32)) |
| /* |
| * Sign-extend the value so (int)-EFOO becomes (long)-EFOO |
| * and will match correctly in comparisons. |
| */ |
| return (int) regs->ax; |
| #endif |
| return regs->ax; |
| } |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| |
| static int |
| handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, |
| sigset_t *oldset, struct pt_regs *regs) |
| { |
| int ret; |
| |
| #ifdef DEBUG_SIG |
| printk("handle_signal pid:%d sig:%lu ip:%lx sp:%lx regs=%p\n", |
| current->pid, sig, |
| regs->ip, regs->sp, regs); |
| #endif |
| |
| /* Are we from a system call? */ |
| if (current_syscall(regs) >= 0) { |
| /* If so, check system call restarting.. */ |
| switch (current_syscall_ret(regs)) { |
| case -ERESTART_RESTARTBLOCK: |
| case -ERESTARTNOHAND: |
| regs->ax = -EINTR; |
| break; |
| |
| case -ERESTARTSYS: |
| if (!(ka->sa.sa_flags & SA_RESTART)) { |
| regs->ax = -EINTR; |
| break; |
| } |
| /* fallthrough */ |
| case -ERESTARTNOINTR: |
| regs->ax = regs->orig_ax; |
| regs->ip -= 2; |
| break; |
| } |
| } |
| |
| /* |
| * If TF is set due to a debugger (TIF_FORCED_TF), clear the TF |
| * flag so that register information in the sigcontext is correct. |
| */ |
| if (unlikely(regs->flags & X86_EFLAGS_TF) && |
| likely(test_and_clear_thread_flag(TIF_FORCED_TF))) |
| regs->flags &= ~X86_EFLAGS_TF; |
| |
| #ifdef CONFIG_IA32_EMULATION |
| if (test_thread_flag(TIF_IA32)) { |
| if (ka->sa.sa_flags & SA_SIGINFO) |
| ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); |
| else |
| ret = ia32_setup_frame(sig, ka, oldset, regs); |
| } else |
| #endif |
| ret = setup_rt_frame(sig, ka, info, oldset, regs); |
| |
| if (ret == 0) { |
| spin_lock_irq(¤t->sighand->siglock); |
| sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); |
| if (!(ka->sa.sa_flags & SA_NODEFER)) |
| sigaddset(¤t->blocked,sig); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| */ |
| static void do_signal(struct pt_regs *regs) |
| { |
| struct k_sigaction ka; |
| siginfo_t info; |
| int signr; |
| sigset_t *oldset; |
| |
| /* |
| * We want the common case to go fast, which |
| * is why we may in certain cases get here from |
| * kernel mode. Just return without doing anything |
| * if so. |
| */ |
| if (!user_mode(regs)) |
| return; |
| |
| if (test_thread_flag(TIF_RESTORE_SIGMASK)) |
| oldset = ¤t->saved_sigmask; |
| else |
| oldset = ¤t->blocked; |
| |
| signr = get_signal_to_deliver(&info, &ka, regs, NULL); |
| if (signr > 0) { |
| /* Re-enable any watchpoints before delivering the |
| * signal to user space. The processor register will |
| * have been cleared if the watchpoint triggered |
| * inside the kernel. |
| */ |
| if (current->thread.debugreg7) |
| set_debugreg(current->thread.debugreg7, 7); |
| |
| /* Whee! Actually deliver the signal. */ |
| if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { |
| /* a signal was successfully delivered; the saved |
| * sigmask will have been stored in the signal frame, |
| * and will be restored by sigreturn, so we can simply |
| * clear the TIF_RESTORE_SIGMASK flag */ |
| clear_thread_flag(TIF_RESTORE_SIGMASK); |
| } |
| return; |
| } |
| |
| /* Did we come from a system call? */ |
| if (current_syscall(regs) >= 0) { |
| /* Restart the system call - no handlers present */ |
| switch (current_syscall_ret(regs)) { |
| case -ERESTARTNOHAND: |
| case -ERESTARTSYS: |
| case -ERESTARTNOINTR: |
| regs->ax = regs->orig_ax; |
| regs->ip -= 2; |
| break; |
| case -ERESTART_RESTARTBLOCK: |
| regs->ax = test_thread_flag(TIF_IA32) ? |
| __NR_ia32_restart_syscall : |
| __NR_restart_syscall; |
| regs->ip -= 2; |
| break; |
| } |
| } |
| |
| /* if there's no signal to deliver, we just put the saved sigmask |
| back. */ |
| if (test_thread_flag(TIF_RESTORE_SIGMASK)) { |
| clear_thread_flag(TIF_RESTORE_SIGMASK); |
| sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); |
| } |
| } |
| |
| void |
| do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) |
| { |
| #ifdef DEBUG_SIG |
| printk("do_notify_resume flags:%x ip:%lx sp:%lx caller:%p pending:%x\n", |
| thread_info_flags, regs->ip, regs->sp, __builtin_return_address(0),signal_pending(current)); |
| #endif |
| |
| /* Pending single-step? */ |
| if (thread_info_flags & _TIF_SINGLESTEP) { |
| regs->flags |= X86_EFLAGS_TF; |
| clear_thread_flag(TIF_SINGLESTEP); |
| } |
| |
| #ifdef CONFIG_X86_MCE |
| /* notify userspace of pending MCEs */ |
| if (thread_info_flags & _TIF_MCE_NOTIFY) |
| mce_notify_user(); |
| #endif /* CONFIG_X86_MCE */ |
| |
| /* deal with pending signal delivery */ |
| if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK)) |
| do_signal(regs); |
| |
| if (thread_info_flags & _TIF_HRTICK_RESCHED) |
| hrtick_resched(); |
| } |
| |
| void signal_fault(struct pt_regs *regs, void __user *frame, char *where) |
| { |
| struct task_struct *me = current; |
| if (show_unhandled_signals && printk_ratelimit()) { |
| printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx", |
| me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax); |
| print_vma_addr(" in ", regs->ip); |
| printk("\n"); |
| } |
| |
| force_sig(SIGSEGV, me); |
| } |