| /* Intel Ethernet Switch Host Interface Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| */ |
| |
| #include "fm10k_tlv.h" |
| |
| /** |
| * fm10k_tlv_msg_init - Initialize message block for TLV data storage |
| * @msg: Pointer to message block |
| * @msg_id: Message ID indicating message type |
| * |
| * This function return success if provided with a valid message pointer |
| **/ |
| s32 fm10k_tlv_msg_init(u32 *msg, u16 msg_id) |
| { |
| /* verify pointer is not NULL */ |
| if (!msg) |
| return FM10K_ERR_PARAM; |
| |
| *msg = (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT) | msg_id; |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_put_null_string - Place null terminated string on message |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * @string: Pointer to string to be stored in attribute |
| * |
| * This function will reorder a string to be CPU endian and store it in |
| * the attribute buffer. It will return success if provided with a valid |
| * pointers. |
| **/ |
| s32 fm10k_tlv_attr_put_null_string(u32 *msg, u16 attr_id, |
| const unsigned char *string) |
| { |
| u32 attr_data = 0, len = 0; |
| u32 *attr; |
| |
| /* verify pointers are not NULL */ |
| if (!string || !msg) |
| return FM10K_ERR_PARAM; |
| |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| |
| /* copy string into local variable and then write to msg */ |
| do { |
| /* write data to message */ |
| if (len && !(len % 4)) { |
| attr[len / 4] = attr_data; |
| attr_data = 0; |
| } |
| |
| /* record character to offset location */ |
| attr_data |= (u32)(*string) << (8 * (len % 4)); |
| len++; |
| |
| /* test for NULL and then increment */ |
| } while (*(string++)); |
| |
| /* write last piece of data to message */ |
| attr[(len + 3) / 4] = attr_data; |
| |
| /* record attribute header, update message length */ |
| len <<= FM10K_TLV_LEN_SHIFT; |
| attr[0] = len | attr_id; |
| |
| /* add header length to length */ |
| len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| *msg += FM10K_TLV_LEN_ALIGN(len); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_get_null_string - Get null terminated string from attribute |
| * @attr: Pointer to attribute |
| * @string: Pointer to location of destination string |
| * |
| * This function pulls the string back out of the attribute and will place |
| * it in the array pointed by by string. It will return success if provided |
| * with a valid pointers. |
| **/ |
| s32 fm10k_tlv_attr_get_null_string(u32 *attr, unsigned char *string) |
| { |
| u32 len; |
| |
| /* verify pointers are not NULL */ |
| if (!string || !attr) |
| return FM10K_ERR_PARAM; |
| |
| len = *attr >> FM10K_TLV_LEN_SHIFT; |
| attr++; |
| |
| while (len--) |
| string[len] = (u8)(attr[len / 4] >> (8 * (len % 4))); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_put_mac_vlan - Store MAC/VLAN attribute in message |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * @mac_addr: MAC address to be stored |
| * |
| * This function will reorder a MAC address to be CPU endian and store it |
| * in the attribute buffer. It will return success if provided with a |
| * valid pointers. |
| **/ |
| s32 fm10k_tlv_attr_put_mac_vlan(u32 *msg, u16 attr_id, |
| const u8 *mac_addr, u16 vlan) |
| { |
| u32 len = ETH_ALEN << FM10K_TLV_LEN_SHIFT; |
| u32 *attr; |
| |
| /* verify pointers are not NULL */ |
| if (!msg || !mac_addr) |
| return FM10K_ERR_PARAM; |
| |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| |
| /* record attribute header, update message length */ |
| attr[0] = len | attr_id; |
| |
| /* copy value into local variable and then write to msg */ |
| attr[1] = le32_to_cpu(*(const __le32 *)&mac_addr[0]); |
| attr[2] = le16_to_cpu(*(const __le16 *)&mac_addr[4]); |
| attr[2] |= (u32)vlan << 16; |
| |
| /* add header length to length */ |
| len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| *msg += FM10K_TLV_LEN_ALIGN(len); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_get_mac_vlan - Get MAC/VLAN stored in attribute |
| * @attr: Pointer to attribute |
| * @attr_id: Attribute ID |
| * @mac_addr: location of buffer to store MAC address |
| * |
| * This function pulls the MAC address back out of the attribute and will |
| * place it in the array pointed by by mac_addr. It will return success |
| * if provided with a valid pointers. |
| **/ |
| s32 fm10k_tlv_attr_get_mac_vlan(u32 *attr, u8 *mac_addr, u16 *vlan) |
| { |
| /* verify pointers are not NULL */ |
| if (!mac_addr || !attr) |
| return FM10K_ERR_PARAM; |
| |
| *(__le32 *)&mac_addr[0] = cpu_to_le32(attr[1]); |
| *(__le16 *)&mac_addr[4] = cpu_to_le16((u16)(attr[2])); |
| *vlan = (u16)(attr[2] >> 16); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_put_bool - Add header indicating value "true" |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * |
| * This function will simply add an attribute header, the fact |
| * that the header is here means the attribute value is true, else |
| * it is false. The function will return success if provided with a |
| * valid pointers. |
| **/ |
| s32 fm10k_tlv_attr_put_bool(u32 *msg, u16 attr_id) |
| { |
| /* verify pointers are not NULL */ |
| if (!msg) |
| return FM10K_ERR_PARAM; |
| |
| /* record attribute header */ |
| msg[FM10K_TLV_DWORD_LEN(*msg)] = attr_id; |
| |
| /* add header length to length */ |
| *msg += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_put_value - Store integer value attribute in message |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * @value: Value to be written |
| * @len: Size of value |
| * |
| * This function will place an integer value of up to 8 bytes in size |
| * in a message attribute. The function will return success provided |
| * that msg is a valid pointer, and len is 1, 2, 4, or 8. |
| **/ |
| s32 fm10k_tlv_attr_put_value(u32 *msg, u16 attr_id, s64 value, u32 len) |
| { |
| u32 *attr; |
| |
| /* verify non-null msg and len is 1, 2, 4, or 8 */ |
| if (!msg || !len || len > 8 || (len & (len - 1))) |
| return FM10K_ERR_PARAM; |
| |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| |
| if (len < 4) { |
| attr[1] = (u32)value & ((0x1ul << (8 * len)) - 1); |
| } else { |
| attr[1] = (u32)value; |
| if (len > 4) |
| attr[2] = (u32)(value >> 32); |
| } |
| |
| /* record attribute header, update message length */ |
| len <<= FM10K_TLV_LEN_SHIFT; |
| attr[0] = len | attr_id; |
| |
| /* add header length to length */ |
| len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| *msg += FM10K_TLV_LEN_ALIGN(len); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_get_value - Get integer value stored in attribute |
| * @attr: Pointer to attribute |
| * @value: Pointer to destination buffer |
| * @len: Size of value |
| * |
| * This function will place an integer value of up to 8 bytes in size |
| * in the offset pointed to by value. The function will return success |
| * provided that pointers are valid and the len value matches the |
| * attribute length. |
| **/ |
| s32 fm10k_tlv_attr_get_value(u32 *attr, void *value, u32 len) |
| { |
| /* verify pointers are not NULL */ |
| if (!attr || !value) |
| return FM10K_ERR_PARAM; |
| |
| if ((*attr >> FM10K_TLV_LEN_SHIFT) != len) |
| return FM10K_ERR_PARAM; |
| |
| if (len == 8) |
| *(u64 *)value = ((u64)attr[2] << 32) | attr[1]; |
| else if (len == 4) |
| *(u32 *)value = attr[1]; |
| else if (len == 2) |
| *(u16 *)value = (u16)attr[1]; |
| else |
| *(u8 *)value = (u8)attr[1]; |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_put_le_struct - Store little endian structure in message |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * @le_struct: Pointer to structure to be written |
| * @len: Size of le_struct |
| * |
| * This function will place a little endian structure value in a message |
| * attribute. The function will return success provided that all pointers |
| * are valid and length is a non-zero multiple of 4. |
| **/ |
| s32 fm10k_tlv_attr_put_le_struct(u32 *msg, u16 attr_id, |
| const void *le_struct, u32 len) |
| { |
| const __le32 *le32_ptr = (const __le32 *)le_struct; |
| u32 *attr; |
| u32 i; |
| |
| /* verify non-null msg and len is in 32 bit words */ |
| if (!msg || !len || (len % 4)) |
| return FM10K_ERR_PARAM; |
| |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| |
| /* copy le32 structure into host byte order at 32b boundaries */ |
| for (i = 0; i < (len / 4); i++) |
| attr[i + 1] = le32_to_cpu(le32_ptr[i]); |
| |
| /* record attribute header, update message length */ |
| len <<= FM10K_TLV_LEN_SHIFT; |
| attr[0] = len | attr_id; |
| |
| /* add header length to length */ |
| len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| *msg += FM10K_TLV_LEN_ALIGN(len); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_get_le_struct - Get little endian struct form attribute |
| * @attr: Pointer to attribute |
| * @le_struct: Pointer to structure to be written |
| * @len: Size of structure |
| * |
| * This function will place a little endian structure in the buffer |
| * pointed to by le_struct. The function will return success |
| * provided that pointers are valid and the len value matches the |
| * attribute length. |
| **/ |
| s32 fm10k_tlv_attr_get_le_struct(u32 *attr, void *le_struct, u32 len) |
| { |
| __le32 *le32_ptr = (__le32 *)le_struct; |
| u32 i; |
| |
| /* verify pointers are not NULL */ |
| if (!le_struct || !attr) |
| return FM10K_ERR_PARAM; |
| |
| if ((*attr >> FM10K_TLV_LEN_SHIFT) != len) |
| return FM10K_ERR_PARAM; |
| |
| attr++; |
| |
| for (i = 0; len; i++, len -= 4) |
| le32_ptr[i] = cpu_to_le32(attr[i]); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_nest_start - Start a set of nested attributes |
| * @msg: Pointer to message block |
| * @attr_id: Attribute ID |
| * |
| * This function will mark off a new nested region for encapsulating |
| * a given set of attributes. The idea is if you wish to place a secondary |
| * structure within the message this mechanism allows for that. The |
| * function will return NULL on failure, and a pointer to the start |
| * of the nested attributes on success. |
| **/ |
| u32 *fm10k_tlv_attr_nest_start(u32 *msg, u16 attr_id) |
| { |
| u32 *attr; |
| |
| /* verify pointer is not NULL */ |
| if (!msg) |
| return NULL; |
| |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| |
| attr[0] = attr_id; |
| |
| /* return pointer to nest header */ |
| return attr; |
| } |
| |
| /** |
| * fm10k_tlv_attr_nest_start - Start a set of nested attributes |
| * @msg: Pointer to message block |
| * |
| * This function closes off an existing set of nested attributes. The |
| * message pointer should be pointing to the parent of the nest. So in |
| * the case of a nest within the nest this would be the outer nest pointer. |
| * This function will return success provided all pointers are valid. |
| **/ |
| s32 fm10k_tlv_attr_nest_stop(u32 *msg) |
| { |
| u32 *attr; |
| u32 len; |
| |
| /* verify pointer is not NULL */ |
| if (!msg) |
| return FM10K_ERR_PARAM; |
| |
| /* locate the nested header and retrieve its length */ |
| attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; |
| len = (attr[0] >> FM10K_TLV_LEN_SHIFT) << FM10K_TLV_LEN_SHIFT; |
| |
| /* only include nest if data was added to it */ |
| if (len) { |
| len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; |
| *msg += len; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_validate - Validate attribute metadata |
| * @attr: Pointer to attribute |
| * @tlv_attr: Type and length info for attribute |
| * |
| * This function does some basic validation of the input TLV. It |
| * verifies the length, and in the case of null terminated strings |
| * it verifies that the last byte is null. The function will |
| * return FM10K_ERR_PARAM if any attribute is malformed, otherwise |
| * it returns 0. |
| **/ |
| static s32 fm10k_tlv_attr_validate(u32 *attr, |
| const struct fm10k_tlv_attr *tlv_attr) |
| { |
| u32 attr_id = *attr & FM10K_TLV_ID_MASK; |
| u16 len = *attr >> FM10K_TLV_LEN_SHIFT; |
| |
| /* verify this is an attribute and not a message */ |
| if (*attr & (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT)) |
| return FM10K_ERR_PARAM; |
| |
| /* search through the list of attributes to find a matching ID */ |
| while (tlv_attr->id < attr_id) |
| tlv_attr++; |
| |
| /* if didn't find a match then we should exit */ |
| if (tlv_attr->id != attr_id) |
| return FM10K_NOT_IMPLEMENTED; |
| |
| /* move to start of attribute data */ |
| attr++; |
| |
| switch (tlv_attr->type) { |
| case FM10K_TLV_NULL_STRING: |
| if (!len || |
| (attr[(len - 1) / 4] & (0xFF << (8 * ((len - 1) % 4))))) |
| return FM10K_ERR_PARAM; |
| if (len > tlv_attr->len) |
| return FM10K_ERR_PARAM; |
| break; |
| case FM10K_TLV_MAC_ADDR: |
| if (len != ETH_ALEN) |
| return FM10K_ERR_PARAM; |
| break; |
| case FM10K_TLV_BOOL: |
| if (len) |
| return FM10K_ERR_PARAM; |
| break; |
| case FM10K_TLV_UNSIGNED: |
| case FM10K_TLV_SIGNED: |
| if (len != tlv_attr->len) |
| return FM10K_ERR_PARAM; |
| break; |
| case FM10K_TLV_LE_STRUCT: |
| /* struct must be 4 byte aligned */ |
| if ((len % 4) || len != tlv_attr->len) |
| return FM10K_ERR_PARAM; |
| break; |
| case FM10K_TLV_NESTED: |
| /* nested attributes must be 4 byte aligned */ |
| if (len % 4) |
| return FM10K_ERR_PARAM; |
| break; |
| default: |
| /* attribute id is mapped to bad value */ |
| return FM10K_ERR_PARAM; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_attr_parse - Parses stream of attribute data |
| * @attr: Pointer to attribute list |
| * @results: Pointer array to store pointers to attributes |
| * @tlv_attr: Type and length info for attributes |
| * |
| * This function validates a stream of attributes and parses them |
| * up into an array of pointers stored in results. The function will |
| * return FM10K_ERR_PARAM on any input or message error, |
| * FM10K_NOT_IMPLEMENTED for any attribute that is outside of the array |
| * and 0 on success. |
| **/ |
| s32 fm10k_tlv_attr_parse(u32 *attr, u32 **results, |
| const struct fm10k_tlv_attr *tlv_attr) |
| { |
| u32 i, attr_id, offset = 0; |
| s32 err = 0; |
| u16 len; |
| |
| /* verify pointers are not NULL */ |
| if (!attr || !results) |
| return FM10K_ERR_PARAM; |
| |
| /* initialize results to NULL */ |
| for (i = 0; i < FM10K_TLV_RESULTS_MAX; i++) |
| results[i] = NULL; |
| |
| /* pull length from the message header */ |
| len = *attr >> FM10K_TLV_LEN_SHIFT; |
| |
| /* no attributes to parse if there is no length */ |
| if (!len) |
| return 0; |
| |
| /* no attributes to parse, just raw data, message becomes attribute */ |
| if (!tlv_attr) { |
| results[0] = attr; |
| return 0; |
| } |
| |
| /* move to start of attribute data */ |
| attr++; |
| |
| /* run through list parsing all attributes */ |
| while (offset < len) { |
| attr_id = *attr & FM10K_TLV_ID_MASK; |
| |
| if (attr_id < FM10K_TLV_RESULTS_MAX) |
| err = fm10k_tlv_attr_validate(attr, tlv_attr); |
| else |
| err = FM10K_NOT_IMPLEMENTED; |
| |
| if (err < 0) |
| return err; |
| if (!err) |
| results[attr_id] = attr; |
| |
| /* update offset */ |
| offset += FM10K_TLV_DWORD_LEN(*attr) * 4; |
| |
| /* move to next attribute */ |
| attr = &attr[FM10K_TLV_DWORD_LEN(*attr)]; |
| } |
| |
| /* we should find ourselves at the end of the list */ |
| if (offset != len) |
| return FM10K_ERR_PARAM; |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_tlv_msg_parse - Parses message header and calls function handler |
| * @hw: Pointer to hardware structure |
| * @msg: Pointer to message |
| * @mbx: Pointer to mailbox information structure |
| * @func: Function array containing list of message handling functions |
| * |
| * This function should be the first function called upon receiving a |
| * message. The handler will identify the message type and call the correct |
| * handler for the given message. It will return the value from the function |
| * call on a recognized message type, otherwise it will return |
| * FM10K_NOT_IMPLEMENTED on an unrecognized type. |
| **/ |
| s32 fm10k_tlv_msg_parse(struct fm10k_hw *hw, u32 *msg, |
| struct fm10k_mbx_info *mbx, |
| const struct fm10k_msg_data *data) |
| { |
| u32 *results[FM10K_TLV_RESULTS_MAX]; |
| u32 msg_id; |
| s32 err; |
| |
| /* verify pointer is not NULL */ |
| if (!msg || !data) |
| return FM10K_ERR_PARAM; |
| |
| /* verify this is a message and not an attribute */ |
| if (!(*msg & (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT))) |
| return FM10K_ERR_PARAM; |
| |
| /* grab message ID */ |
| msg_id = *msg & FM10K_TLV_ID_MASK; |
| |
| while (data->id < msg_id) |
| data++; |
| |
| /* if we didn't find it then pass it up as an error */ |
| if (data->id != msg_id) { |
| while (data->id != FM10K_TLV_ERROR) |
| data++; |
| } |
| |
| /* parse the attributes into the results list */ |
| err = fm10k_tlv_attr_parse(msg, results, data->attr); |
| if (err < 0) |
| return err; |
| |
| return data->func(hw, results, mbx); |
| } |
| |
| /** |
| * fm10k_tlv_msg_error - Default handler for unrecognized TLV message IDs |
| * @hw: Pointer to hardware structure |
| * @results: Pointer array to message, results[0] is pointer to message |
| * @mbx: Unused mailbox pointer |
| * |
| * This function is a default handler for unrecognized messages. At a |
| * a minimum it just indicates that the message requested was |
| * unimplemented. |
| **/ |
| s32 fm10k_tlv_msg_error(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info *mbx) |
| { |
| return FM10K_NOT_IMPLEMENTED; |
| } |
| |
| static const unsigned char test_str[] = "fm10k"; |
| static const unsigned char test_mac[ETH_ALEN] = { 0x12, 0x34, 0x56, |
| 0x78, 0x9a, 0xbc }; |
| static const u16 test_vlan = 0x0FED; |
| static const u64 test_u64 = 0xfedcba9876543210ull; |
| static const u32 test_u32 = 0x87654321; |
| static const u16 test_u16 = 0x8765; |
| static const u8 test_u8 = 0x87; |
| static const s64 test_s64 = -0x123456789abcdef0ll; |
| static const s32 test_s32 = -0x1235678; |
| static const s16 test_s16 = -0x1234; |
| static const s8 test_s8 = -0x12; |
| static const __le32 test_le[2] = { cpu_to_le32(0x12345678), |
| cpu_to_le32(0x9abcdef0)}; |
| |
| /* The message below is meant to be used as a test message to demonstrate |
| * how to use the TLV interface and to test the types. Normally this code |
| * be compiled out by stripping the code wrapped in FM10K_TLV_TEST_MSG |
| */ |
| const struct fm10k_tlv_attr fm10k_tlv_msg_test_attr[] = { |
| FM10K_TLV_ATTR_NULL_STRING(FM10K_TEST_MSG_STRING, 80), |
| FM10K_TLV_ATTR_MAC_ADDR(FM10K_TEST_MSG_MAC_ADDR), |
| FM10K_TLV_ATTR_U8(FM10K_TEST_MSG_U8), |
| FM10K_TLV_ATTR_U16(FM10K_TEST_MSG_U16), |
| FM10K_TLV_ATTR_U32(FM10K_TEST_MSG_U32), |
| FM10K_TLV_ATTR_U64(FM10K_TEST_MSG_U64), |
| FM10K_TLV_ATTR_S8(FM10K_TEST_MSG_S8), |
| FM10K_TLV_ATTR_S16(FM10K_TEST_MSG_S16), |
| FM10K_TLV_ATTR_S32(FM10K_TEST_MSG_S32), |
| FM10K_TLV_ATTR_S64(FM10K_TEST_MSG_S64), |
| FM10K_TLV_ATTR_LE_STRUCT(FM10K_TEST_MSG_LE_STRUCT, 8), |
| FM10K_TLV_ATTR_NESTED(FM10K_TEST_MSG_NESTED), |
| FM10K_TLV_ATTR_S32(FM10K_TEST_MSG_RESULT), |
| FM10K_TLV_ATTR_LAST |
| }; |
| |
| /** |
| * fm10k_tlv_msg_test_generate_data - Stuff message with data |
| * @msg: Pointer to message |
| * @attr_flags: List of flags indicating what attributes to add |
| * |
| * This function is meant to load a message buffer with attribute data |
| **/ |
| static void fm10k_tlv_msg_test_generate_data(u32 *msg, u32 attr_flags) |
| { |
| if (attr_flags & (1 << FM10K_TEST_MSG_STRING)) |
| fm10k_tlv_attr_put_null_string(msg, FM10K_TEST_MSG_STRING, |
| test_str); |
| if (attr_flags & (1 << FM10K_TEST_MSG_MAC_ADDR)) |
| fm10k_tlv_attr_put_mac_vlan(msg, FM10K_TEST_MSG_MAC_ADDR, |
| test_mac, test_vlan); |
| if (attr_flags & (1 << FM10K_TEST_MSG_U8)) |
| fm10k_tlv_attr_put_u8(msg, FM10K_TEST_MSG_U8, test_u8); |
| if (attr_flags & (1 << FM10K_TEST_MSG_U16)) |
| fm10k_tlv_attr_put_u16(msg, FM10K_TEST_MSG_U16, test_u16); |
| if (attr_flags & (1 << FM10K_TEST_MSG_U32)) |
| fm10k_tlv_attr_put_u32(msg, FM10K_TEST_MSG_U32, test_u32); |
| if (attr_flags & (1 << FM10K_TEST_MSG_U64)) |
| fm10k_tlv_attr_put_u64(msg, FM10K_TEST_MSG_U64, test_u64); |
| if (attr_flags & (1 << FM10K_TEST_MSG_S8)) |
| fm10k_tlv_attr_put_s8(msg, FM10K_TEST_MSG_S8, test_s8); |
| if (attr_flags & (1 << FM10K_TEST_MSG_S16)) |
| fm10k_tlv_attr_put_s16(msg, FM10K_TEST_MSG_S16, test_s16); |
| if (attr_flags & (1 << FM10K_TEST_MSG_S32)) |
| fm10k_tlv_attr_put_s32(msg, FM10K_TEST_MSG_S32, test_s32); |
| if (attr_flags & (1 << FM10K_TEST_MSG_S64)) |
| fm10k_tlv_attr_put_s64(msg, FM10K_TEST_MSG_S64, test_s64); |
| if (attr_flags & (1 << FM10K_TEST_MSG_LE_STRUCT)) |
| fm10k_tlv_attr_put_le_struct(msg, FM10K_TEST_MSG_LE_STRUCT, |
| test_le, 8); |
| } |
| |
| /** |
| * fm10k_tlv_msg_test_create - Create a test message testing all attributes |
| * @msg: Pointer to message |
| * @attr_flags: List of flags indicating what attributes to add |
| * |
| * This function is meant to load a message buffer with all attribute types |
| * including a nested attribute. |
| **/ |
| void fm10k_tlv_msg_test_create(u32 *msg, u32 attr_flags) |
| { |
| u32 *nest = NULL; |
| |
| fm10k_tlv_msg_init(msg, FM10K_TLV_MSG_ID_TEST); |
| |
| fm10k_tlv_msg_test_generate_data(msg, attr_flags); |
| |
| /* check for nested attributes */ |
| attr_flags >>= FM10K_TEST_MSG_NESTED; |
| |
| if (attr_flags) { |
| nest = fm10k_tlv_attr_nest_start(msg, FM10K_TEST_MSG_NESTED); |
| |
| fm10k_tlv_msg_test_generate_data(nest, attr_flags); |
| |
| fm10k_tlv_attr_nest_stop(msg); |
| } |
| } |
| |
| /** |
| * fm10k_tlv_msg_test - Validate all results on test message receive |
| * @hw: Pointer to hardware structure |
| * @results: Pointer array to attributes in the mesage |
| * @mbx: Pointer to mailbox information structure |
| * |
| * This function does a check to verify all attributes match what the test |
| * message placed in the message buffer. It is the default handler |
| * for TLV test messages. |
| **/ |
| s32 fm10k_tlv_msg_test(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info *mbx) |
| { |
| u32 *nest_results[FM10K_TLV_RESULTS_MAX]; |
| unsigned char result_str[80]; |
| unsigned char result_mac[ETH_ALEN]; |
| s32 err = 0; |
| __le32 result_le[2]; |
| u16 result_vlan; |
| u64 result_u64; |
| u32 result_u32; |
| u16 result_u16; |
| u8 result_u8; |
| s64 result_s64; |
| s32 result_s32; |
| s16 result_s16; |
| s8 result_s8; |
| u32 reply[3]; |
| |
| /* retrieve results of a previous test */ |
| if (!!results[FM10K_TEST_MSG_RESULT]) |
| return fm10k_tlv_attr_get_s32(results[FM10K_TEST_MSG_RESULT], |
| &mbx->test_result); |
| |
| parse_nested: |
| if (!!results[FM10K_TEST_MSG_STRING]) { |
| err = fm10k_tlv_attr_get_null_string( |
| results[FM10K_TEST_MSG_STRING], |
| result_str); |
| if (!err && memcmp(test_str, result_str, sizeof(test_str))) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_MAC_ADDR]) { |
| err = fm10k_tlv_attr_get_mac_vlan( |
| results[FM10K_TEST_MSG_MAC_ADDR], |
| result_mac, &result_vlan); |
| if (!err && memcmp(test_mac, result_mac, ETH_ALEN)) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (!err && test_vlan != result_vlan) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_U8]) { |
| err = fm10k_tlv_attr_get_u8(results[FM10K_TEST_MSG_U8], |
| &result_u8); |
| if (!err && test_u8 != result_u8) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_U16]) { |
| err = fm10k_tlv_attr_get_u16(results[FM10K_TEST_MSG_U16], |
| &result_u16); |
| if (!err && test_u16 != result_u16) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_U32]) { |
| err = fm10k_tlv_attr_get_u32(results[FM10K_TEST_MSG_U32], |
| &result_u32); |
| if (!err && test_u32 != result_u32) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_U64]) { |
| err = fm10k_tlv_attr_get_u64(results[FM10K_TEST_MSG_U64], |
| &result_u64); |
| if (!err && test_u64 != result_u64) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_S8]) { |
| err = fm10k_tlv_attr_get_s8(results[FM10K_TEST_MSG_S8], |
| &result_s8); |
| if (!err && test_s8 != result_s8) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_S16]) { |
| err = fm10k_tlv_attr_get_s16(results[FM10K_TEST_MSG_S16], |
| &result_s16); |
| if (!err && test_s16 != result_s16) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_S32]) { |
| err = fm10k_tlv_attr_get_s32(results[FM10K_TEST_MSG_S32], |
| &result_s32); |
| if (!err && test_s32 != result_s32) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_S64]) { |
| err = fm10k_tlv_attr_get_s64(results[FM10K_TEST_MSG_S64], |
| &result_s64); |
| if (!err && test_s64 != result_s64) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| if (!!results[FM10K_TEST_MSG_LE_STRUCT]) { |
| err = fm10k_tlv_attr_get_le_struct( |
| results[FM10K_TEST_MSG_LE_STRUCT], |
| result_le, |
| sizeof(result_le)); |
| if (!err && memcmp(test_le, result_le, sizeof(test_le))) |
| err = FM10K_ERR_INVALID_VALUE; |
| if (err) |
| goto report_result; |
| } |
| |
| if (!!results[FM10K_TEST_MSG_NESTED]) { |
| /* clear any pointers */ |
| memset(nest_results, 0, sizeof(nest_results)); |
| |
| /* parse the nested attributes into the nest results list */ |
| err = fm10k_tlv_attr_parse(results[FM10K_TEST_MSG_NESTED], |
| nest_results, |
| fm10k_tlv_msg_test_attr); |
| if (err) |
| goto report_result; |
| |
| /* loop back through to the start */ |
| results = nest_results; |
| goto parse_nested; |
| } |
| |
| report_result: |
| /* generate reply with test result */ |
| fm10k_tlv_msg_init(reply, FM10K_TLV_MSG_ID_TEST); |
| fm10k_tlv_attr_put_s32(reply, FM10K_TEST_MSG_RESULT, err); |
| |
| /* load onto outgoing mailbox */ |
| return mbx->ops.enqueue_tx(hw, mbx, reply); |
| } |