| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#" |
| $schema: "http://devicetree.org/meta-schemas/core.yaml#" |
| |
| title: MediaTek System Clock Controller for MT8186 |
| |
| maintainers: |
| - Chun-Jie Chen <chun-jie.chen@mediatek.com> |
| |
| description: | |
| The clock architecture in MediaTek like below |
| PLLs --> |
| dividers --> |
| muxes |
| --> |
| clock gate |
| |
| The apmixedsys provides most of PLLs which generated from SoC 26m. |
| The topckgen provides dividers and muxes which provide the clock source to other IP blocks. |
| The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks. |
| The mcusys provides mux control to select the clock source in AP MCU. |
| The device nodes also provide the system control capacity for configuration. |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - mediatek,mt8186-mcusys |
| - mediatek,mt8186-topckgen |
| - mediatek,mt8186-infracfg_ao |
| - mediatek,mt8186-apmixedsys |
| - const: syscon |
| |
| reg: |
| maxItems: 1 |
| |
| '#clock-cells': |
| const: 1 |
| |
| '#reset-cells': |
| const: 1 |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| topckgen: syscon@10000000 { |
| compatible = "mediatek,mt8186-topckgen", "syscon"; |
| reg = <0x10000000 0x1000>; |
| #clock-cells = <1>; |
| }; |