| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/nand-chip.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NAND Chip Common Properties |
| |
| maintainers: |
| - Miquel Raynal <miquel.raynal@bootlin.com> |
| |
| allOf: |
| - $ref: "mtd.yaml#" |
| |
| description: | |
| This file covers the generic description of a NAND chip. It implies that the |
| bus interface should not be taken into account: both raw NAND devices and |
| SPI-NAND devices are concerned by this description. |
| |
| properties: |
| reg: |
| description: |
| Contains the chip-select IDs. |
| |
| nand-ecc-engine: |
| description: | |
| A phandle on the hardware ECC engine if any. There are |
| basically three possibilities: |
| 1/ The ECC engine is part of the NAND controller, in this |
| case the phandle should reference the parent node. |
| 2/ The ECC engine is part of the NAND part (on-die), in this |
| case the phandle should reference the node itself. |
| 3/ The ECC engine is external, in this case the phandle should |
| reference the specific ECC engine node. |
| $ref: /schemas/types.yaml#/definitions/phandle |
| |
| nand-use-soft-ecc-engine: |
| description: Use a software ECC engine. |
| type: boolean |
| |
| nand-no-ecc-engine: |
| description: Do not use any ECC correction. |
| type: boolean |
| |
| nand-ecc-algo: |
| description: |
| Desired ECC algorithm. |
| $ref: /schemas/types.yaml#/definitions/string |
| enum: [hamming, bch, rs] |
| |
| nand-ecc-strength: |
| description: |
| Maximum number of bits that can be corrected per ECC step. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 1 |
| |
| nand-ecc-step-size: |
| description: |
| Number of data bytes covered by a single ECC step. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 1 |
| |
| secure-regions: |
| description: |
| Regions in the NAND chip which are protected using a secure element |
| like Trustzone. This property contains the start address and size of |
| the secure regions present. |
| $ref: /schemas/types.yaml#/definitions/uint64-matrix |
| |
| required: |
| - reg |
| |
| # This file can be referenced by more specific devices (like spi-nands) |
| additionalProperties: true |