| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |
| * |
| * Taken from pxa-regs.h by Russell King |
| * |
| * Author: Nicolas Pitre |
| * Copyright: MontaVista Software Inc. |
| */ |
| |
| #ifndef __PXA2XX_REGS_H |
| #define __PXA2XX_REGS_H |
| |
| #include "pxa-regs.h" |
| |
| /* |
| * Power Manager |
| */ |
| |
| #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ |
| #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ |
| #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ |
| #define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ |
| #define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ |
| #define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ |
| #define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ |
| #define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ |
| #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ |
| #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ |
| #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ |
| #define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ |
| #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ |
| |
| #define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ |
| #define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ |
| #define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ |
| #define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ |
| #define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ |
| #define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ |
| #define PCMD(x) __REG2(0x40F00080, (x)<<2) |
| #define PCMD0 __REG(0x40F00080 + 0 * 4) |
| #define PCMD1 __REG(0x40F00080 + 1 * 4) |
| #define PCMD2 __REG(0x40F00080 + 2 * 4) |
| #define PCMD3 __REG(0x40F00080 + 3 * 4) |
| #define PCMD4 __REG(0x40F00080 + 4 * 4) |
| #define PCMD5 __REG(0x40F00080 + 5 * 4) |
| #define PCMD6 __REG(0x40F00080 + 6 * 4) |
| #define PCMD7 __REG(0x40F00080 + 7 * 4) |
| #define PCMD8 __REG(0x40F00080 + 8 * 4) |
| #define PCMD9 __REG(0x40F00080 + 9 * 4) |
| #define PCMD10 __REG(0x40F00080 + 10 * 4) |
| #define PCMD11 __REG(0x40F00080 + 11 * 4) |
| #define PCMD12 __REG(0x40F00080 + 12 * 4) |
| #define PCMD13 __REG(0x40F00080 + 13 * 4) |
| #define PCMD14 __REG(0x40F00080 + 14 * 4) |
| #define PCMD15 __REG(0x40F00080 + 15 * 4) |
| #define PCMD16 __REG(0x40F00080 + 16 * 4) |
| #define PCMD17 __REG(0x40F00080 + 17 * 4) |
| #define PCMD18 __REG(0x40F00080 + 18 * 4) |
| #define PCMD19 __REG(0x40F00080 + 19 * 4) |
| #define PCMD20 __REG(0x40F00080 + 20 * 4) |
| #define PCMD21 __REG(0x40F00080 + 21 * 4) |
| #define PCMD22 __REG(0x40F00080 + 22 * 4) |
| #define PCMD23 __REG(0x40F00080 + 23 * 4) |
| #define PCMD24 __REG(0x40F00080 + 24 * 4) |
| #define PCMD25 __REG(0x40F00080 + 25 * 4) |
| #define PCMD26 __REG(0x40F00080 + 26 * 4) |
| #define PCMD27 __REG(0x40F00080 + 27 * 4) |
| #define PCMD28 __REG(0x40F00080 + 28 * 4) |
| #define PCMD29 __REG(0x40F00080 + 29 * 4) |
| #define PCMD30 __REG(0x40F00080 + 30 * 4) |
| #define PCMD31 __REG(0x40F00080 + 31 * 4) |
| |
| #define PCMD_MBC (1<<12) |
| #define PCMD_DCE (1<<11) |
| #define PCMD_LC (1<<10) |
| /* FIXME: PCMD_SQC need be checked. */ |
| #define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, |
| bit 9 should be 0 all day. */ |
| #define PVCR_VCSA (0x1<<14) |
| #define PVCR_CommandDelay (0xf80) |
| #define PCFR_PI2C_EN (0x1 << 6) |
| |
| #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ |
| #define PSSR_RDH (1 << 5) /* Read Disable Hold */ |
| #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ |
| #define PSSR_STS (1 << 3) /* Standby Mode Status */ |
| #define PSSR_VFS (1 << 2) /* VDD Fault Status */ |
| #define PSSR_BFS (1 << 1) /* Battery Fault Status */ |
| #define PSSR_SSS (1 << 0) /* Software Sleep Status */ |
| |
| #define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ |
| |
| #define PCFR_RO (1 << 15) /* RDH Override */ |
| #define PCFR_PO (1 << 14) /* PH Override */ |
| #define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ |
| #define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ |
| #define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ |
| #define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ |
| #define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ |
| #define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ |
| #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ |
| #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ |
| #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ |
| #define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ |
| |
| #define RCSR_GPR (1 << 3) /* GPIO Reset */ |
| #define RCSR_SMR (1 << 2) /* Sleep Mode */ |
| #define RCSR_WDR (1 << 1) /* Watchdog Reset */ |
| #define RCSR_HWR (1 << 0) /* Hardware Reset */ |
| |
| #define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ |
| #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ |
| #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ |
| #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ |
| #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ |
| #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ |
| #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ |
| #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ |
| #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ |
| #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ |
| #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ |
| #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ |
| #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ |
| #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ |
| #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ |
| #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ |
| #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ |
| #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ |
| |
| /* |
| * PXA2xx specific Core clock definitions |
| */ |
| #define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ |
| #define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ |
| #define CKEN io_p2v(0x41300004) /* Clock Enable Register */ |
| #define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ |
| |
| #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ |
| #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ |
| |
| /* PWRMODE register M field values */ |
| |
| #define PWRMODE_IDLE 0x1 |
| #define PWRMODE_STANDBY 0x2 |
| #define PWRMODE_SLEEP 0x3 |
| #define PWRMODE_DEEPSLEEP 0x7 |
| |
| #endif |
