blob: b03fba21279931661b5bebcc4a330058bb00625e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/security.h>
#include <linux/debugfs.h>
#include <linux/mutex.h>
#include <cxlmem.h>
#include <cxl.h>
#include "core.h"
static bool cxl_raw_allow_all;
/**
* DOC: cxl mbox
*
* Core implementation of the CXL 2.0 Type-3 Memory Device Mailbox. The
* implementation is used by the cxl_pci driver to initialize the device
* and implement the cxl_mem.h IOCTL UAPI. It also implements the
* backend of the cxl_pmem_ctl() transport for LIBNVDIMM.
*/
#define cxl_for_each_cmd(cmd) \
for ((cmd) = &cxl_mem_commands[0]; \
((cmd) - cxl_mem_commands) < ARRAY_SIZE(cxl_mem_commands); (cmd)++)
#define CXL_CMD(_id, sin, sout, _flags) \
[CXL_MEM_COMMAND_ID_##_id] = { \
.info = { \
.id = CXL_MEM_COMMAND_ID_##_id, \
.size_in = sin, \
.size_out = sout, \
}, \
.opcode = CXL_MBOX_OP_##_id, \
.flags = _flags, \
}
#define CXL_VARIABLE_PAYLOAD ~0U
/*
* This table defines the supported mailbox commands for the driver. This table
* is made up of a UAPI structure. Non-negative values as parameters in the
* table will be validated against the user's input. For example, if size_in is
* 0, and the user passed in 1, it is an error.
*/
static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = {
CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE),
#ifdef CONFIG_CXL_MEM_RAW_COMMANDS
CXL_CMD(RAW, CXL_VARIABLE_PAYLOAD, CXL_VARIABLE_PAYLOAD, 0),
#endif
CXL_CMD(GET_SUPPORTED_LOGS, 0, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE),
CXL_CMD(GET_FW_INFO, 0, 0x50, 0),
CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0),
CXL_CMD(GET_LSA, 0x8, CXL_VARIABLE_PAYLOAD, 0),
CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0),
CXL_CMD(GET_LOG, 0x18, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE),
CXL_CMD(SET_PARTITION_INFO, 0x0a, 0, 0),
CXL_CMD(SET_LSA, CXL_VARIABLE_PAYLOAD, 0, 0),
CXL_CMD(GET_ALERT_CONFIG, 0, 0x10, 0),
CXL_CMD(SET_ALERT_CONFIG, 0xc, 0, 0),
CXL_CMD(GET_SHUTDOWN_STATE, 0, 0x1, 0),
CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0),
CXL_CMD(GET_POISON, 0x10, CXL_VARIABLE_PAYLOAD, 0),
CXL_CMD(INJECT_POISON, 0x8, 0, 0),
CXL_CMD(CLEAR_POISON, 0x48, 0, 0),
CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0),
CXL_CMD(SCAN_MEDIA, 0x11, 0, 0),
CXL_CMD(GET_SCAN_MEDIA, 0, CXL_VARIABLE_PAYLOAD, 0),
};
/*
* Commands that RAW doesn't permit. The rationale for each:
*
* CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment /
* coordination of transaction timeout values at the root bridge level.
*
* CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live
* and needs to be coordinated with HDM updates.
*
* CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the
* driver and any writes from userspace invalidates those contents.
*
* CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes
* to the device after it is marked clean, userspace can not make that
* assertion.
*
* CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that
* is kept up to date with patrol notifications and error management.
*/
static u16 cxl_disabled_raw_commands[] = {
CXL_MBOX_OP_ACTIVATE_FW,
CXL_MBOX_OP_SET_PARTITION_INFO,
CXL_MBOX_OP_SET_LSA,
CXL_MBOX_OP_SET_SHUTDOWN_STATE,
CXL_MBOX_OP_SCAN_MEDIA,
CXL_MBOX_OP_GET_SCAN_MEDIA,
};
/*
* Command sets that RAW doesn't permit. All opcodes in this set are
* disabled because they pass plain text security payloads over the
* user/kernel boundary. This functionality is intended to be wrapped
* behind the keys ABI which allows for encrypted payloads in the UAPI
*/
static u8 security_command_sets[] = {
0x44, /* Sanitize */
0x45, /* Persistent Memory Data-at-rest Security */
0x46, /* Security Passthrough */
};
static bool cxl_is_security_command(u16 opcode)
{
int i;
for (i = 0; i < ARRAY_SIZE(security_command_sets); i++)
if (security_command_sets[i] == (opcode >> 8))
return true;
return false;
}
static struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
{
struct cxl_mem_command *c;
cxl_for_each_cmd(c)
if (c->opcode == opcode)
return c;
return NULL;
}
static const char *cxl_mem_opcode_to_name(u16 opcode)
{
struct cxl_mem_command *c;
c = cxl_mem_find_command(opcode);
if (!c)
return NULL;
return cxl_command_names[c->info.id].name;
}
/**
* cxl_internal_send_cmd() - Kernel internal interface to send a mailbox command
* @cxlds: The device data for the operation
* @mbox_cmd: initialized command to execute
*
* Context: Any context.
* Return:
* * %>=0 - Number of bytes returned in @out.
* * %-E2BIG - Payload is too large for hardware.
* * %-EBUSY - Couldn't acquire exclusive mailbox access.
* * %-EFAULT - Hardware error occurred.
* * %-ENXIO - Command completed, but device reported an error.
* * %-EIO - Unexpected output size.
*
* Mailbox commands may execute successfully yet the device itself reported an
* error. While this distinction can be useful for commands from userspace, the
* kernel will only be able to use results when both are successful.
*/
int cxl_internal_send_cmd(struct cxl_dev_state *cxlds,
struct cxl_mbox_cmd *mbox_cmd)
{
size_t out_size, min_out;
int rc;
if (mbox_cmd->size_in > cxlds->payload_size ||
mbox_cmd->size_out > cxlds->payload_size)
return -E2BIG;
out_size = mbox_cmd->size_out;
min_out = mbox_cmd->min_out;
rc = cxlds->mbox_send(cxlds, mbox_cmd);
if (rc)
return rc;
if (mbox_cmd->return_code != CXL_MBOX_CMD_RC_SUCCESS)
return cxl_mbox_cmd_rc2errno(mbox_cmd);
if (!out_size)
return 0;
/*
* Variable sized output needs to at least satisfy the caller's
* minimum if not the fully requested size.
*/
if (min_out == 0)
min_out = out_size;
if (mbox_cmd->size_out < min_out)
return -EIO;
return 0;
}
EXPORT_SYMBOL_NS_GPL(cxl_internal_send_cmd, CXL);
static bool cxl_mem_raw_command_allowed(u16 opcode)
{
int i;
if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS))
return false;
if (security_locked_down(LOCKDOWN_PCI_ACCESS))
return false;
if (cxl_raw_allow_all)
return true;
if (cxl_is_security_command(opcode))
return false;
for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++)
if (cxl_disabled_raw_commands[i] == opcode)
return false;
return true;
}
/**
* cxl_payload_from_user_allowed() - Check contents of in_payload.
* @opcode: The mailbox command opcode.
* @payload_in: Pointer to the input payload passed in from user space.
*
* Return:
* * true - payload_in passes check for @opcode.
* * false - payload_in contains invalid or unsupported values.
*
* The driver may inspect payload contents before sending a mailbox
* command from user space to the device. The intent is to reject
* commands with input payloads that are known to be unsafe. This
* check is not intended to replace the users careful selection of
* mailbox command parameters and makes no guarantee that the user
* command will succeed, nor that it is appropriate.
*
* The specific checks are determined by the opcode.
*/
static bool cxl_payload_from_user_allowed(u16 opcode, void *payload_in)
{
switch (opcode) {
case CXL_MBOX_OP_SET_PARTITION_INFO: {
struct cxl_mbox_set_partition_info *pi = payload_in;
if (pi->flags & CXL_SET_PARTITION_IMMEDIATE_FLAG)
return false;
break;
}
default:
break;
}
return true;
}
static int cxl_mbox_cmd_ctor(struct cxl_mbox_cmd *mbox,
struct cxl_dev_state *cxlds, u16 opcode,
size_t in_size, size_t out_size, u64 in_payload)
{
*mbox = (struct cxl_mbox_cmd) {
.opcode = opcode,
.size_in = in_size,
};
if (in_size) {
mbox->payload_in = vmemdup_user(u64_to_user_ptr(in_payload),
in_size);
if (IS_ERR(mbox->payload_in))
return PTR_ERR(mbox->payload_in);
if (!cxl_payload_from_user_allowed(opcode, mbox->payload_in)) {
dev_dbg(cxlds->dev, "%s: input payload not allowed\n",
cxl_mem_opcode_to_name(opcode));
kvfree(mbox->payload_in);
return -EBUSY;
}
}
/* Prepare to handle a full payload for variable sized output */
if (out_size == CXL_VARIABLE_PAYLOAD)
mbox->size_out = cxlds->payload_size;
else
mbox->size_out = out_size;
if (mbox->size_out) {
mbox->payload_out = kvzalloc(mbox->size_out, GFP_KERNEL);
if (!mbox->payload_out) {
kvfree(mbox->payload_in);
return -ENOMEM;
}
}
return 0;
}
static void cxl_mbox_cmd_dtor(struct cxl_mbox_cmd *mbox)
{
kvfree(mbox->payload_in);
kvfree(mbox->payload_out);
}
static int cxl_to_mem_cmd_raw(struct cxl_mem_command *mem_cmd,
const struct cxl_send_command *send_cmd,
struct cxl_dev_state *cxlds)
{
if (send_cmd->raw.rsvd)
return -EINVAL;
/*
* Unlike supported commands, the output size of RAW commands
* gets passed along without further checking, so it must be
* validated here.
*/
if (send_cmd->out.size > cxlds->payload_size)
return -EINVAL;
if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode))
return -EPERM;
dev_WARN_ONCE(cxlds->dev, true, "raw command path used\n");
*mem_cmd = (struct cxl_mem_command) {
.info = {
.id = CXL_MEM_COMMAND_ID_RAW,
.size_in = send_cmd->in.size,
.size_out = send_cmd->out.size,
},
.opcode = send_cmd->raw.opcode
};
return 0;
}
static int cxl_to_mem_cmd(struct cxl_mem_command *mem_cmd,
const struct cxl_send_command *send_cmd,
struct cxl_dev_state *cxlds)
{
struct cxl_mem_command *c = &cxl_mem_commands[send_cmd->id];
const struct cxl_command_info *info = &c->info;
if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK)
return -EINVAL;
if (send_cmd->rsvd)
return -EINVAL;
if (send_cmd->in.rsvd || send_cmd->out.rsvd)
return -EINVAL;
/* Check that the command is enabled for hardware */
if (!test_bit(info->id, cxlds->enabled_cmds))
return -ENOTTY;
/* Check that the command is not claimed for exclusive kernel use */
if (test_bit(info->id, cxlds->exclusive_cmds))
return -EBUSY;
/* Check the input buffer is the expected size */
if ((info->size_in != CXL_VARIABLE_PAYLOAD) &&
(info->size_in != send_cmd->in.size))
return -ENOMEM;
/* Check the output buffer is at least large enough */
if ((info->size_out != CXL_VARIABLE_PAYLOAD) &&
(send_cmd->out.size < info->size_out))
return -ENOMEM;
*mem_cmd = (struct cxl_mem_command) {
.info = {
.id = info->id,
.flags = info->flags,
.size_in = send_cmd->in.size,
.size_out = send_cmd->out.size,
},
.opcode = c->opcode
};
return 0;
}
/**
* cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND.
* @mbox_cmd: Sanitized and populated &struct cxl_mbox_cmd.
* @cxlds: The device data for the operation
* @send_cmd: &struct cxl_send_command copied in from userspace.
*
* Return:
* * %0 - @out_cmd is ready to send.
* * %-ENOTTY - Invalid command specified.
* * %-EINVAL - Reserved fields or invalid values were used.
* * %-ENOMEM - Input or output buffer wasn't sized properly.
* * %-EPERM - Attempted to use a protected command.
* * %-EBUSY - Kernel has claimed exclusive access to this opcode
*
* The result of this command is a fully validated command in @mbox_cmd that is
* safe to send to the hardware.
*/
static int cxl_validate_cmd_from_user(struct cxl_mbox_cmd *mbox_cmd,
struct cxl_dev_state *cxlds,
const struct cxl_send_command *send_cmd)
{
struct cxl_mem_command mem_cmd;
int rc;
if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX)
return -ENOTTY;
/*
* The user can never specify an input payload larger than what hardware
* supports, but output can be arbitrarily large (simply write out as
* much data as the hardware provides).
*/
if (send_cmd->in.size > cxlds->payload_size)
return -EINVAL;
/* Sanitize and construct a cxl_mem_command */
if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW)
rc = cxl_to_mem_cmd_raw(&mem_cmd, send_cmd, cxlds);
else
rc = cxl_to_mem_cmd(&mem_cmd, send_cmd, cxlds);
if (rc)
return rc;
/* Sanitize and construct a cxl_mbox_cmd */
return cxl_mbox_cmd_ctor(mbox_cmd, cxlds, mem_cmd.opcode,
mem_cmd.info.size_in, mem_cmd.info.size_out,
send_cmd->in.payload);
}
int cxl_query_cmd(struct cxl_memdev *cxlmd,
struct cxl_mem_query_commands __user *q)
{
struct device *dev = &cxlmd->dev;
struct cxl_mem_command *cmd;
u32 n_commands;
int j = 0;
dev_dbg(dev, "Query IOCTL\n");
if (get_user(n_commands, &q->n_commands))
return -EFAULT;
/* returns the total number if 0 elements are requested. */
if (n_commands == 0)
return put_user(ARRAY_SIZE(cxl_mem_commands), &q->n_commands);
/*
* otherwise, return max(n_commands, total commands) cxl_command_info
* structures.
*/
cxl_for_each_cmd(cmd) {
const struct cxl_command_info *info = &cmd->info;
if (copy_to_user(&q->commands[j++], info, sizeof(*info)))
return -EFAULT;
if (j == n_commands)
break;
}
return 0;
}
/**
* handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace.
* @cxlds: The device data for the operation
* @mbox_cmd: The validated mailbox command.
* @out_payload: Pointer to userspace's output payload.
* @size_out: (Input) Max payload size to copy out.
* (Output) Payload size hardware generated.
* @retval: Hardware generated return code from the operation.
*
* Return:
* * %0 - Mailbox transaction succeeded. This implies the mailbox
* protocol completed successfully not that the operation itself
* was successful.
* * %-ENOMEM - Couldn't allocate a bounce buffer.
* * %-EFAULT - Something happened with copy_to/from_user.
* * %-EINTR - Mailbox acquisition interrupted.
* * %-EXXX - Transaction level failures.
*
* Dispatches a mailbox command on behalf of a userspace request.
* The output payload is copied to userspace.
*
* See cxl_send_cmd().
*/
static int handle_mailbox_cmd_from_user(struct cxl_dev_state *cxlds,
struct cxl_mbox_cmd *mbox_cmd,
u64 out_payload, s32 *size_out,
u32 *retval)
{
struct device *dev = cxlds->dev;
int rc;
dev_dbg(dev,
"Submitting %s command for user\n"
"\topcode: %x\n"
"\tsize: %zx\n",
cxl_mem_opcode_to_name(mbox_cmd->opcode),
mbox_cmd->opcode, mbox_cmd->size_in);
rc = cxlds->mbox_send(cxlds, mbox_cmd);
if (rc)
goto out;
/*
* @size_out contains the max size that's allowed to be written back out
* to userspace. While the payload may have written more output than
* this it will have to be ignored.
*/
if (mbox_cmd->size_out) {
dev_WARN_ONCE(dev, mbox_cmd->size_out > *size_out,
"Invalid return size\n");
if (copy_to_user(u64_to_user_ptr(out_payload),
mbox_cmd->payload_out, mbox_cmd->size_out)) {
rc = -EFAULT;
goto out;
}
}
*size_out = mbox_cmd->size_out;
*retval = mbox_cmd->return_code;
out:
cxl_mbox_cmd_dtor(mbox_cmd);
return rc;
}
int cxl_send_cmd(struct cxl_memdev *cxlmd, struct cxl_send_command __user *s)
{
struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct device *dev = &cxlmd->dev;
struct cxl_send_command send;
struct cxl_mbox_cmd mbox_cmd;
int rc;
dev_dbg(dev, "Send IOCTL\n");
if (copy_from_user(&send, s, sizeof(send)))
return -EFAULT;
rc = cxl_validate_cmd_from_user(&mbox_cmd, cxlmd->cxlds, &send);
if (rc)
return rc;
rc = handle_mailbox_cmd_from_user(cxlds, &mbox_cmd, send.out.payload,
&send.out.size, &send.retval);
if (rc)
return rc;
if (copy_to_user(s, &send, sizeof(send)))
return -EFAULT;
return 0;
}
static int cxl_xfer_log(struct cxl_dev_state *cxlds, uuid_t *uuid, u32 size, u8 *out)
{
u32 remaining = size;
u32 offset = 0;
while (remaining) {
u32 xfer_size = min_t(u32, remaining, cxlds->payload_size);
struct cxl_mbox_cmd mbox_cmd;
struct cxl_mbox_get_log log;
int rc;
log = (struct cxl_mbox_get_log) {
.uuid = *uuid,
.offset = cpu_to_le32(offset),
.length = cpu_to_le32(xfer_size),
};
mbox_cmd = (struct cxl_mbox_cmd) {
.opcode = CXL_MBOX_OP_GET_LOG,
.size_in = sizeof(log),
.payload_in = &log,
.size_out = xfer_size,
.payload_out = out,
};
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
if (rc < 0)
return rc;
out += xfer_size;
remaining -= xfer_size;
offset += xfer_size;
}
return 0;
}
/**
* cxl_walk_cel() - Walk through the Command Effects Log.
* @cxlds: The device data for the operation
* @size: Length of the Command Effects Log.
* @cel: CEL
*
* Iterate over each entry in the CEL and determine if the driver supports the
* command. If so, the command is enabled for the device and can be used later.
*/
static void cxl_walk_cel(struct cxl_dev_state *cxlds, size_t size, u8 *cel)
{
struct cxl_cel_entry *cel_entry;
const int cel_entries = size / sizeof(*cel_entry);
int i;
cel_entry = (struct cxl_cel_entry *) cel;
for (i = 0; i < cel_entries; i++) {
u16 opcode = le16_to_cpu(cel_entry[i].opcode);
struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
if (!cmd) {
dev_dbg(cxlds->dev,
"Opcode 0x%04x unsupported by driver", opcode);
continue;
}
set_bit(cmd->info.id, cxlds->enabled_cmds);
}
}
static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_dev_state *cxlds)
{
struct cxl_mbox_get_supported_logs *ret;
struct cxl_mbox_cmd mbox_cmd;
int rc;
ret = kvmalloc(cxlds->payload_size, GFP_KERNEL);
if (!ret)
return ERR_PTR(-ENOMEM);
mbox_cmd = (struct cxl_mbox_cmd) {
.opcode = CXL_MBOX_OP_GET_SUPPORTED_LOGS,
.size_out = cxlds->payload_size,
.payload_out = ret,
/* At least the record number field must be valid */
.min_out = 2,
};
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
if (rc < 0) {
kvfree(ret);
return ERR_PTR(rc);
}
return ret;
}
enum {
CEL_UUID,
VENDOR_DEBUG_UUID,
};
/* See CXL 2.0 Table 170. Get Log Input Payload */
static const uuid_t log_uuid[] = {
[CEL_UUID] = DEFINE_CXL_CEL_UUID,
[VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID,
};
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @cxlds: The device data for the operation
*
* Returns 0 if enumerate completed successfully.
*
* CXL devices have optional support for certain commands. This function will
* determine the set of supported commands for the hardware and update the
* enabled_cmds bitmap in the @cxlds.
*/
int cxl_enumerate_cmds(struct cxl_dev_state *cxlds)
{
struct cxl_mbox_get_supported_logs *gsl;
struct device *dev = cxlds->dev;
struct cxl_mem_command *cmd;
int i, rc;
gsl = cxl_get_gsl(cxlds);
if (IS_ERR(gsl))
return PTR_ERR(gsl);
rc = -ENOENT;
for (i = 0; i < le16_to_cpu(gsl->entries); i++) {
u32 size = le32_to_cpu(gsl->entry[i].size);
uuid_t uuid = gsl->entry[i].uuid;
u8 *log;
dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size);
if (!uuid_equal(&uuid, &log_uuid[CEL_UUID]))
continue;
log = kvmalloc(size, GFP_KERNEL);
if (!log) {
rc = -ENOMEM;
goto out;
}
rc = cxl_xfer_log(cxlds, &uuid, size, log);
if (rc) {
kvfree(log);
goto out;
}
cxl_walk_cel(cxlds, size, log);
kvfree(log);
/* In case CEL was bogus, enable some default commands. */
cxl_for_each_cmd(cmd)
if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE)
set_bit(cmd->info.id, cxlds->enabled_cmds);
/* Found the required CEL */
rc = 0;
}
out:
kvfree(gsl);
return rc;
}
EXPORT_SYMBOL_NS_GPL(cxl_enumerate_cmds, CXL);
/**
* cxl_mem_get_partition_info - Get partition info
* @cxlds: The device data for the operation
*
* Retrieve the current partition info for the device specified. The active
* values are the current capacity in bytes. If not 0, the 'next' values are
* the pending values, in bytes, which take affect on next cold reset.
*
* Return: 0 if no error: or the result of the mailbox command.
*
* See CXL @8.2.9.5.2.1 Get Partition Info
*/
static int cxl_mem_get_partition_info(struct cxl_dev_state *cxlds)
{
struct cxl_mbox_get_partition_info pi;
struct cxl_mbox_cmd mbox_cmd;
int rc;
mbox_cmd = (struct cxl_mbox_cmd) {
.opcode = CXL_MBOX_OP_GET_PARTITION_INFO,
.size_out = sizeof(pi),
.payload_out = &pi,
};
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
if (rc)
return rc;
cxlds->active_volatile_bytes =
le64_to_cpu(pi.active_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
cxlds->active_persistent_bytes =
le64_to_cpu(pi.active_persistent_cap) * CXL_CAPACITY_MULTIPLIER;
cxlds->next_volatile_bytes =
le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
cxlds->next_persistent_bytes =
le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER;
return 0;
}
/**
* cxl_dev_state_identify() - Send the IDENTIFY command to the device.
* @cxlds: The device data for the operation
*
* Return: 0 if identify was executed successfully.
*
* This will dispatch the identify command to the device and on success populate
* structures to be exported to sysfs.
*/
int cxl_dev_state_identify(struct cxl_dev_state *cxlds)
{
/* See CXL 2.0 Table 175 Identify Memory Device Output Payload */
struct cxl_mbox_identify id;
struct cxl_mbox_cmd mbox_cmd;
int rc;
mbox_cmd = (struct cxl_mbox_cmd) {
.opcode = CXL_MBOX_OP_IDENTIFY,
.size_out = sizeof(id),
.payload_out = &id,
};
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
if (rc < 0)
return rc;
cxlds->total_bytes =
le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER;
cxlds->volatile_only_bytes =
le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER;
cxlds->persistent_only_bytes =
le64_to_cpu(id.persistent_capacity) * CXL_CAPACITY_MULTIPLIER;
cxlds->partition_align_bytes =
le64_to_cpu(id.partition_align) * CXL_CAPACITY_MULTIPLIER;
cxlds->lsa_size = le32_to_cpu(id.lsa_size);
memcpy(cxlds->firmware_version, id.fw_revision, sizeof(id.fw_revision));
return 0;
}
EXPORT_SYMBOL_NS_GPL(cxl_dev_state_identify, CXL);
static int add_dpa_res(struct device *dev, struct resource *parent,
struct resource *res, resource_size_t start,
resource_size_t size, const char *type)
{
int rc;
res->name = type;
res->start = start;
res->end = start + size - 1;
res->flags = IORESOURCE_MEM;
if (resource_size(res) == 0) {
dev_dbg(dev, "DPA(%s): no capacity\n", res->name);
return 0;
}
rc = request_resource(parent, res);
if (rc) {
dev_err(dev, "DPA(%s): failed to track %pr (%d)\n", res->name,
res, rc);
return rc;
}
dev_dbg(dev, "DPA(%s): %pr\n", res->name, res);
return 0;
}
int cxl_mem_create_range_info(struct cxl_dev_state *cxlds)
{
struct device *dev = cxlds->dev;
int rc;
cxlds->dpa_res =
(struct resource)DEFINE_RES_MEM(0, cxlds->total_bytes);
if (cxlds->partition_align_bytes == 0) {
rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
cxlds->volatile_only_bytes, "ram");
if (rc)
return rc;
return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res,
cxlds->volatile_only_bytes,
cxlds->persistent_only_bytes, "pmem");
}
rc = cxl_mem_get_partition_info(cxlds);
if (rc) {
dev_err(dev, "Failed to query partition information\n");
return rc;
}
rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
cxlds->active_volatile_bytes, "ram");
if (rc)
return rc;
return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res,
cxlds->active_volatile_bytes,
cxlds->active_persistent_bytes, "pmem");
}
EXPORT_SYMBOL_NS_GPL(cxl_mem_create_range_info, CXL);
struct cxl_dev_state *cxl_dev_state_create(struct device *dev)
{
struct cxl_dev_state *cxlds;
cxlds = devm_kzalloc(dev, sizeof(*cxlds), GFP_KERNEL);
if (!cxlds) {
dev_err(dev, "No memory available\n");
return ERR_PTR(-ENOMEM);
}
mutex_init(&cxlds->mbox_mutex);
cxlds->dev = dev;
return cxlds;
}
EXPORT_SYMBOL_NS_GPL(cxl_dev_state_create, CXL);
void __init cxl_mbox_init(void)
{
struct dentry *mbox_debugfs;
mbox_debugfs = cxl_debugfs_create_dir("mbox");
debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs,
&cxl_raw_allow_all);
}