| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2016, NVIDIA Corporation |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reset.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb/chipidea.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/phy.h> |
| |
| #include <soc/tegra/common.h> |
| |
| #include "../host/ehci.h" |
| |
| #include "ci.h" |
| |
| struct tegra_usb { |
| struct ci_hdrc_platform_data data; |
| struct platform_device *dev; |
| |
| const struct tegra_usb_soc_info *soc; |
| struct usb_phy *phy; |
| struct clk *clk; |
| |
| bool needs_double_reset; |
| }; |
| |
| struct tegra_usb_soc_info { |
| unsigned long flags; |
| unsigned int txfifothresh; |
| enum usb_dr_mode dr_mode; |
| }; |
| |
| static const struct tegra_usb_soc_info tegra20_ehci_soc_info = { |
| .flags = CI_HDRC_REQUIRES_ALIGNED_DMA | |
| CI_HDRC_OVERRIDE_PHY_CONTROL | |
| CI_HDRC_SUPPORTS_RUNTIME_PM, |
| .dr_mode = USB_DR_MODE_HOST, |
| .txfifothresh = 10, |
| }; |
| |
| static const struct tegra_usb_soc_info tegra30_ehci_soc_info = { |
| .flags = CI_HDRC_REQUIRES_ALIGNED_DMA | |
| CI_HDRC_OVERRIDE_PHY_CONTROL | |
| CI_HDRC_SUPPORTS_RUNTIME_PM, |
| .dr_mode = USB_DR_MODE_HOST, |
| .txfifothresh = 16, |
| }; |
| |
| static const struct tegra_usb_soc_info tegra20_udc_soc_info = { |
| .flags = CI_HDRC_REQUIRES_ALIGNED_DMA | |
| CI_HDRC_OVERRIDE_PHY_CONTROL | |
| CI_HDRC_SUPPORTS_RUNTIME_PM, |
| .dr_mode = USB_DR_MODE_UNKNOWN, |
| .txfifothresh = 10, |
| }; |
| |
| static const struct tegra_usb_soc_info tegra30_udc_soc_info = { |
| .flags = CI_HDRC_REQUIRES_ALIGNED_DMA | |
| CI_HDRC_OVERRIDE_PHY_CONTROL | |
| CI_HDRC_SUPPORTS_RUNTIME_PM, |
| .dr_mode = USB_DR_MODE_UNKNOWN, |
| .txfifothresh = 16, |
| }; |
| |
| static const struct of_device_id tegra_usb_of_match[] = { |
| { |
| .compatible = "nvidia,tegra20-ehci", |
| .data = &tegra20_ehci_soc_info, |
| }, { |
| .compatible = "nvidia,tegra30-ehci", |
| .data = &tegra30_ehci_soc_info, |
| }, { |
| .compatible = "nvidia,tegra20-udc", |
| .data = &tegra20_udc_soc_info, |
| }, { |
| .compatible = "nvidia,tegra30-udc", |
| .data = &tegra30_udc_soc_info, |
| }, { |
| .compatible = "nvidia,tegra114-udc", |
| .data = &tegra30_udc_soc_info, |
| }, { |
| .compatible = "nvidia,tegra124-udc", |
| .data = &tegra30_udc_soc_info, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_usb_of_match); |
| |
| static int tegra_usb_reset_controller(struct device *dev) |
| { |
| struct reset_control *rst, *rst_utmi; |
| struct device_node *phy_np; |
| int err; |
| |
| rst = devm_reset_control_get_shared(dev, "usb"); |
| if (IS_ERR(rst)) { |
| dev_err(dev, "can't get ehci reset: %pe\n", rst); |
| return PTR_ERR(rst); |
| } |
| |
| phy_np = of_parse_phandle(dev->of_node, "nvidia,phy", 0); |
| if (!phy_np) |
| return -ENOENT; |
| |
| /* |
| * The 1st USB controller contains some UTMI pad registers that are |
| * global for all the controllers on the chip. Those registers are |
| * also cleared when reset is asserted to the 1st controller. |
| */ |
| rst_utmi = of_reset_control_get_shared(phy_np, "utmi-pads"); |
| if (IS_ERR(rst_utmi)) { |
| dev_warn(dev, "can't get utmi-pads reset from the PHY\n"); |
| dev_warn(dev, "continuing, but please update your DT\n"); |
| } else { |
| /* |
| * PHY driver performs UTMI-pads reset in a case of a |
| * non-legacy DT. |
| */ |
| reset_control_put(rst_utmi); |
| } |
| |
| of_node_put(phy_np); |
| |
| /* reset control is shared, hence initialize it first */ |
| err = reset_control_deassert(rst); |
| if (err) |
| return err; |
| |
| err = reset_control_assert(rst); |
| if (err) |
| return err; |
| |
| udelay(1); |
| |
| err = reset_control_deassert(rst); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static int tegra_usb_notify_event(struct ci_hdrc *ci, unsigned int event) |
| { |
| struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent); |
| struct ehci_hcd *ehci; |
| |
| switch (event) { |
| case CI_HDRC_CONTROLLER_RESET_EVENT: |
| if (ci->hcd) { |
| ehci = hcd_to_ehci(ci->hcd); |
| ehci->has_tdi_phy_lpm = false; |
| ehci_writel(ehci, usb->soc->txfifothresh << 16, |
| &ehci->regs->txfill_tuning); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_usb_internal_port_reset(struct ehci_hcd *ehci, |
| u32 __iomem *portsc_reg, |
| unsigned long *flags) |
| { |
| u32 saved_usbintr, temp; |
| unsigned int i, tries; |
| int retval = 0; |
| |
| saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable); |
| /* disable USB interrupt */ |
| ehci_writel(ehci, 0, &ehci->regs->intr_enable); |
| spin_unlock_irqrestore(&ehci->lock, *flags); |
| |
| /* |
| * Here we have to do Port Reset at most twice for |
| * Port Enable bit to be set. |
| */ |
| for (i = 0; i < 2; i++) { |
| temp = ehci_readl(ehci, portsc_reg); |
| temp |= PORT_RESET; |
| ehci_writel(ehci, temp, portsc_reg); |
| fsleep(10000); |
| temp &= ~PORT_RESET; |
| ehci_writel(ehci, temp, portsc_reg); |
| fsleep(1000); |
| tries = 100; |
| do { |
| fsleep(1000); |
| /* |
| * Up to this point, Port Enable bit is |
| * expected to be set after 2 ms waiting. |
| * USB1 usually takes extra 45 ms, for safety, |
| * we take 100 ms as timeout. |
| */ |
| temp = ehci_readl(ehci, portsc_reg); |
| } while (!(temp & PORT_PE) && tries--); |
| if (temp & PORT_PE) |
| break; |
| } |
| if (i == 2) |
| retval = -ETIMEDOUT; |
| |
| /* |
| * Clear Connect Status Change bit if it's set. |
| * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared. |
| */ |
| if (temp & PORT_CSC) |
| ehci_writel(ehci, PORT_CSC, portsc_reg); |
| |
| /* |
| * Write to clear any interrupt status bits that might be set |
| * during port reset. |
| */ |
| temp = ehci_readl(ehci, &ehci->regs->status); |
| ehci_writel(ehci, temp, &ehci->regs->status); |
| |
| /* restore original interrupt-enable bits */ |
| spin_lock_irqsave(&ehci->lock, *flags); |
| ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable); |
| |
| return retval; |
| } |
| |
| static int tegra_ehci_hub_control(struct ci_hdrc *ci, u16 typeReq, u16 wValue, |
| u16 wIndex, char *buf, u16 wLength, |
| bool *done, unsigned long *flags) |
| { |
| struct tegra_usb *usb = dev_get_drvdata(ci->dev->parent); |
| struct ehci_hcd *ehci = hcd_to_ehci(ci->hcd); |
| u32 __iomem *status_reg; |
| int retval = 0; |
| |
| status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; |
| |
| switch (typeReq) { |
| case SetPortFeature: |
| if (wValue != USB_PORT_FEAT_RESET || !usb->needs_double_reset) |
| break; |
| |
| /* for USB1 port we need to issue Port Reset twice internally */ |
| retval = tegra_usb_internal_port_reset(ehci, status_reg, flags); |
| *done = true; |
| break; |
| } |
| |
| return retval; |
| } |
| |
| static void tegra_usb_enter_lpm(struct ci_hdrc *ci, bool enable) |
| { |
| /* |
| * Touching any register which belongs to AHB clock domain will |
| * hang CPU if USB controller is put into low power mode because |
| * AHB USB clock is gated on Tegra in the LPM. |
| * |
| * Tegra PHY has a separate register for checking the clock status |
| * and usb_phy_set_suspend() takes care of gating/ungating the clocks |
| * and restoring the PHY state on Tegra. Hence DEVLC/PORTSC registers |
| * shouldn't be touched directly by the CI driver. |
| */ |
| usb_phy_set_suspend(ci->usb_phy, enable); |
| } |
| |
| static int tegra_usb_probe(struct platform_device *pdev) |
| { |
| const struct tegra_usb_soc_info *soc; |
| struct tegra_usb *usb; |
| int err; |
| |
| usb = devm_kzalloc(&pdev->dev, sizeof(*usb), GFP_KERNEL); |
| if (!usb) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, usb); |
| |
| soc = of_device_get_match_data(&pdev->dev); |
| if (!soc) { |
| dev_err(&pdev->dev, "failed to match OF data\n"); |
| return -EINVAL; |
| } |
| |
| usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); |
| if (IS_ERR(usb->phy)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy), |
| "failed to get PHY\n"); |
| |
| usb->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(usb->clk)) { |
| err = PTR_ERR(usb->clk); |
| dev_err(&pdev->dev, "failed to get clock: %d\n", err); |
| return err; |
| } |
| |
| err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); |
| if (err) |
| return err; |
| |
| pm_runtime_enable(&pdev->dev); |
| err = pm_runtime_resume_and_get(&pdev->dev); |
| if (err) |
| return err; |
| |
| if (device_property_present(&pdev->dev, "nvidia,needs-double-reset")) |
| usb->needs_double_reset = true; |
| |
| err = tegra_usb_reset_controller(&pdev->dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to reset controller: %d\n", err); |
| goto fail_power_off; |
| } |
| |
| /* |
| * USB controller registers shouldn't be touched before PHY is |
| * initialized, otherwise CPU will hang because clocks are gated. |
| * PHY driver controls gating of internal USB clocks on Tegra. |
| */ |
| err = usb_phy_init(usb->phy); |
| if (err) |
| goto fail_power_off; |
| |
| /* setup and register ChipIdea HDRC device */ |
| usb->soc = soc; |
| usb->data.name = "tegra-usb"; |
| usb->data.flags = soc->flags; |
| usb->data.usb_phy = usb->phy; |
| usb->data.dr_mode = soc->dr_mode; |
| usb->data.capoffset = DEF_CAPOFFSET; |
| usb->data.enter_lpm = tegra_usb_enter_lpm; |
| usb->data.hub_control = tegra_ehci_hub_control; |
| usb->data.notify_event = tegra_usb_notify_event; |
| |
| /* Tegra PHY driver currently doesn't support LPM for ULPI */ |
| if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI) |
| usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM; |
| |
| usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource, |
| pdev->num_resources, &usb->data); |
| if (IS_ERR(usb->dev)) { |
| err = PTR_ERR(usb->dev); |
| dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err); |
| goto phy_shutdown; |
| } |
| |
| return 0; |
| |
| phy_shutdown: |
| usb_phy_shutdown(usb->phy); |
| fail_power_off: |
| pm_runtime_put_sync_suspend(&pdev->dev); |
| pm_runtime_force_suspend(&pdev->dev); |
| |
| return err; |
| } |
| |
| static int tegra_usb_remove(struct platform_device *pdev) |
| { |
| struct tegra_usb *usb = platform_get_drvdata(pdev); |
| |
| ci_hdrc_remove_device(usb->dev); |
| usb_phy_shutdown(usb->phy); |
| |
| pm_runtime_put_sync_suspend(&pdev->dev); |
| pm_runtime_force_suspend(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tegra_usb_runtime_resume(struct device *dev) |
| { |
| struct tegra_usb *usb = dev_get_drvdata(dev); |
| int err; |
| |
| err = clk_prepare_enable(usb->clk); |
| if (err < 0) { |
| dev_err(dev, "failed to enable clock: %d\n", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev) |
| { |
| struct tegra_usb *usb = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(usb->clk); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops tegra_usb_pm = { |
| SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume, |
| NULL) |
| }; |
| |
| static struct platform_driver tegra_usb_driver = { |
| .driver = { |
| .name = "tegra-usb", |
| .of_match_table = tegra_usb_of_match, |
| .pm = &tegra_usb_pm, |
| }, |
| .probe = tegra_usb_probe, |
| .remove = tegra_usb_remove, |
| }; |
| module_platform_driver(tegra_usb_driver); |
| |
| MODULE_DESCRIPTION("NVIDIA Tegra USB driver"); |
| MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>"); |
| MODULE_LICENSE("GPL v2"); |