| /* |
| * Copyright (c) 2016, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| |
| #include "dsi_pll.h" |
| #include "dsi.xml.h" |
| |
| /* |
| * DSI PLL 14nm - clock diagram (eg: DSI0): |
| * |
| * dsi0n1_postdiv_clk |
| * | |
| * | |
| * +----+ | +----+ |
| * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte |
| * +----+ | +----+ |
| * | dsi0n1_postdivby2_clk |
| * | +----+ | |
| * o---| /2 |--o--|\ |
| * | +----+ | \ +----+ |
| * | | |--| n2 |-- dsi0pll |
| * o--------------| / +----+ |
| * |/ |
| */ |
| |
| #define POLL_MAX_READS 15 |
| #define POLL_TIMEOUT_US 1000 |
| |
| #define NUM_PROVIDED_CLKS 2 |
| |
| #define VCO_REF_CLK_RATE 19200000 |
| #define VCO_MIN_RATE 1300000000UL |
| #define VCO_MAX_RATE 2600000000UL |
| |
| #define DSI_BYTE_PLL_CLK 0 |
| #define DSI_PIXEL_PLL_CLK 1 |
| |
| #define DSI_PLL_DEFAULT_VCO_POSTDIV 1 |
| |
| struct dsi_pll_input { |
| u32 fref; /* reference clk */ |
| u32 fdata; /* bit clock rate */ |
| u32 dsiclk_sel; /* Mux configuration (see diagram) */ |
| u32 ssc_en; /* SSC enable/disable */ |
| u32 ldo_en; |
| |
| /* fixed params */ |
| u32 refclk_dbler_en; |
| u32 vco_measure_time; |
| u32 kvco_measure_time; |
| u32 bandgap_timer; |
| u32 pll_wakeup_timer; |
| u32 plllock_cnt; |
| u32 plllock_rng; |
| u32 ssc_center; |
| u32 ssc_adj_period; |
| u32 ssc_spread; |
| u32 ssc_freq; |
| u32 pll_ie_trim; |
| u32 pll_ip_trim; |
| u32 pll_iptat_trim; |
| u32 pll_cpcset_cur; |
| u32 pll_cpmset_cur; |
| |
| u32 pll_icpmset; |
| u32 pll_icpcset; |
| |
| u32 pll_icpmset_p; |
| u32 pll_icpmset_m; |
| |
| u32 pll_icpcset_p; |
| u32 pll_icpcset_m; |
| |
| u32 pll_lpf_res1; |
| u32 pll_lpf_cap1; |
| u32 pll_lpf_cap2; |
| u32 pll_c3ctrl; |
| u32 pll_r3ctrl; |
| }; |
| |
| struct dsi_pll_output { |
| u32 pll_txclk_en; |
| u32 dec_start; |
| u32 div_frac_start; |
| u32 ssc_period; |
| u32 ssc_step_size; |
| u32 plllock_cmp; |
| u32 pll_vco_div_ref; |
| u32 pll_vco_count; |
| u32 pll_kvco_div_ref; |
| u32 pll_kvco_count; |
| u32 pll_misc1; |
| u32 pll_lpf2_postdiv; |
| u32 pll_resetsm_cntrl; |
| u32 pll_resetsm_cntrl2; |
| u32 pll_resetsm_cntrl5; |
| u32 pll_kvco_code; |
| |
| u32 cmn_clk_cfg0; |
| u32 cmn_clk_cfg1; |
| u32 cmn_ldo_cntrl; |
| |
| u32 pll_postdiv; |
| u32 fcvo; |
| }; |
| |
| struct pll_14nm_cached_state { |
| unsigned long vco_rate; |
| u8 n2postdiv; |
| u8 n1postdiv; |
| }; |
| |
| struct dsi_pll_14nm { |
| struct msm_dsi_pll base; |
| |
| int id; |
| struct platform_device *pdev; |
| |
| void __iomem *phy_cmn_mmio; |
| void __iomem *mmio; |
| |
| int vco_delay; |
| |
| struct dsi_pll_input in; |
| struct dsi_pll_output out; |
| |
| /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ |
| spinlock_t postdiv_lock; |
| |
| u64 vco_current_rate; |
| u64 vco_ref_clk_rate; |
| |
| /* private clocks: */ |
| struct clk_hw *hws[NUM_DSI_CLOCKS_MAX]; |
| u32 num_hws; |
| |
| /* clock-provider: */ |
| struct clk_hw_onecell_data *hw_data; |
| |
| struct pll_14nm_cached_state cached_state; |
| |
| enum msm_dsi_phy_usecase uc; |
| struct dsi_pll_14nm *slave; |
| }; |
| |
| #define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base) |
| |
| /* |
| * Private struct for N1/N2 post-divider clocks. These clocks are similar to |
| * the generic clk_divider class of clocks. The only difference is that it |
| * also sets the slave DSI PLL's post-dividers if in Dual DSI mode |
| */ |
| struct dsi_pll_14nm_postdiv { |
| struct clk_hw hw; |
| |
| /* divider params */ |
| u8 shift; |
| u8 width; |
| u8 flags; /* same flags as used by clk_divider struct */ |
| |
| struct dsi_pll_14nm *pll; |
| }; |
| |
| #define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw) |
| |
| /* |
| * Global list of private DSI PLL struct pointers. We need this for Dual DSI |
| * mode, where the master PLL's clk_ops needs access the slave's private data |
| */ |
| static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; |
| |
| static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, |
| u32 nb_tries, u32 timeout_us) |
| { |
| bool pll_locked = false; |
| void __iomem *base = pll_14nm->mmio; |
| u32 tries, val; |
| |
| tries = nb_tries; |
| while (tries--) { |
| val = pll_read(base + |
| REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); |
| pll_locked = !!(val & BIT(5)); |
| |
| if (pll_locked) |
| break; |
| |
| udelay(timeout_us); |
| } |
| |
| if (!pll_locked) { |
| tries = nb_tries; |
| while (tries--) { |
| val = pll_read(base + |
| REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); |
| pll_locked = !!(val & BIT(0)); |
| |
| if (pll_locked) |
| break; |
| |
| udelay(timeout_us); |
| } |
| } |
| |
| DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); |
| |
| return pll_locked; |
| } |
| |
| static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) |
| { |
| pll->in.fref = pll->vco_ref_clk_rate; |
| pll->in.fdata = 0; |
| pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ |
| pll->in.ldo_en = 0; /* disabled for now */ |
| |
| /* fixed input */ |
| pll->in.refclk_dbler_en = 0; |
| pll->in.vco_measure_time = 5; |
| pll->in.kvco_measure_time = 5; |
| pll->in.bandgap_timer = 4; |
| pll->in.pll_wakeup_timer = 5; |
| pll->in.plllock_cnt = 1; |
| pll->in.plllock_rng = 0; |
| |
| /* |
| * SSC is enabled by default. We might need DT props for configuring |
| * some SSC params like PPM and center/down spread etc. |
| */ |
| pll->in.ssc_en = 1; |
| pll->in.ssc_center = 0; /* down spread by default */ |
| pll->in.ssc_spread = 5; /* PPM / 1000 */ |
| pll->in.ssc_freq = 31500; /* default recommended */ |
| pll->in.ssc_adj_period = 37; |
| |
| pll->in.pll_ie_trim = 4; |
| pll->in.pll_ip_trim = 4; |
| pll->in.pll_cpcset_cur = 1; |
| pll->in.pll_cpmset_cur = 1; |
| pll->in.pll_icpmset = 4; |
| pll->in.pll_icpcset = 4; |
| pll->in.pll_icpmset_p = 0; |
| pll->in.pll_icpmset_m = 0; |
| pll->in.pll_icpcset_p = 0; |
| pll->in.pll_icpcset_m = 0; |
| pll->in.pll_lpf_res1 = 3; |
| pll->in.pll_lpf_cap1 = 11; |
| pll->in.pll_lpf_cap2 = 1; |
| pll->in.pll_iptat_trim = 7; |
| pll->in.pll_c3ctrl = 2; |
| pll->in.pll_r3ctrl = 1; |
| } |
| |
| #define CEIL(x, y) (((x) + ((y) - 1)) / (y)) |
| |
| static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) |
| { |
| u32 period, ssc_period; |
| u32 ref, rem; |
| u64 step_size; |
| |
| DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); |
| |
| ssc_period = pll->in.ssc_freq / 500; |
| period = (u32)pll->vco_ref_clk_rate / 1000; |
| ssc_period = CEIL(period, ssc_period); |
| ssc_period -= 1; |
| pll->out.ssc_period = ssc_period; |
| |
| DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, |
| pll->in.ssc_spread, pll->out.ssc_period); |
| |
| step_size = (u32)pll->vco_current_rate; |
| ref = pll->vco_ref_clk_rate; |
| ref /= 1000; |
| step_size = div_u64(step_size, ref); |
| step_size <<= 20; |
| step_size = div_u64(step_size, 1000); |
| step_size *= pll->in.ssc_spread; |
| step_size = div_u64(step_size, 1000); |
| step_size *= (pll->in.ssc_adj_period + 1); |
| |
| rem = 0; |
| step_size = div_u64_rem(step_size, ssc_period + 1, &rem); |
| if (rem) |
| step_size++; |
| |
| DBG("step_size=%lld", step_size); |
| |
| step_size &= 0x0ffff; /* take lower 16 bits */ |
| |
| pll->out.ssc_step_size = step_size; |
| } |
| |
| static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) |
| { |
| struct dsi_pll_input *pin = &pll->in; |
| struct dsi_pll_output *pout = &pll->out; |
| u64 multiplier = BIT(20); |
| u64 dec_start_multiple, dec_start, pll_comp_val; |
| u32 duration, div_frac_start; |
| u64 vco_clk_rate = pll->vco_current_rate; |
| u64 fref = pll->vco_ref_clk_rate; |
| |
| DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); |
| |
| dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref); |
| div_u64_rem(dec_start_multiple, multiplier, &div_frac_start); |
| |
| dec_start = div_u64(dec_start_multiple, multiplier); |
| |
| pout->dec_start = (u32)dec_start; |
| pout->div_frac_start = div_frac_start; |
| |
| if (pin->plllock_cnt == 0) |
| duration = 1024; |
| else if (pin->plllock_cnt == 1) |
| duration = 256; |
| else if (pin->plllock_cnt == 2) |
| duration = 128; |
| else |
| duration = 32; |
| |
| pll_comp_val = duration * dec_start_multiple; |
| pll_comp_val = div_u64(pll_comp_val, multiplier); |
| do_div(pll_comp_val, 10); |
| |
| pout->plllock_cmp = (u32)pll_comp_val; |
| |
| pout->pll_txclk_en = 1; |
| pout->cmn_ldo_cntrl = 0x3c; |
| } |
| |
| static u32 pll_14nm_kvco_slop(u32 vrate) |
| { |
| u32 slop = 0; |
| |
| if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL) |
| slop = 600; |
| else if (vrate > 1800000000UL && vrate < 2300000000UL) |
| slop = 400; |
| else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE) |
| slop = 280; |
| |
| return slop; |
| } |
| |
| static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) |
| { |
| struct dsi_pll_input *pin = &pll->in; |
| struct dsi_pll_output *pout = &pll->out; |
| u64 vco_clk_rate = pll->vco_current_rate; |
| u64 fref = pll->vco_ref_clk_rate; |
| u64 data; |
| u32 cnt; |
| |
| data = fref * pin->vco_measure_time; |
| do_div(data, 1000000); |
| data &= 0x03ff; /* 10 bits */ |
| data -= 2; |
| pout->pll_vco_div_ref = data; |
| |
| data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ |
| data *= pin->vco_measure_time; |
| do_div(data, 10); |
| pout->pll_vco_count = data; |
| |
| data = fref * pin->kvco_measure_time; |
| do_div(data, 1000000); |
| data &= 0x03ff; /* 10 bits */ |
| data -= 1; |
| pout->pll_kvco_div_ref = data; |
| |
| cnt = pll_14nm_kvco_slop(vco_clk_rate); |
| cnt *= 2; |
| cnt /= 100; |
| cnt *= pin->kvco_measure_time; |
| pout->pll_kvco_count = cnt; |
| |
| pout->pll_misc1 = 16; |
| pout->pll_resetsm_cntrl = 48; |
| pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; |
| pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; |
| pout->pll_kvco_code = 0; |
| } |
| |
| static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) |
| { |
| void __iomem *base = pll->mmio; |
| struct dsi_pll_input *pin = &pll->in; |
| struct dsi_pll_output *pout = &pll->out; |
| u8 data; |
| |
| data = pin->ssc_adj_period; |
| data &= 0x0ff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); |
| data = (pin->ssc_adj_period >> 8); |
| data &= 0x03; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); |
| |
| data = pout->ssc_period; |
| data &= 0x0ff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); |
| data = (pout->ssc_period >> 8); |
| data &= 0x0ff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); |
| |
| data = pout->ssc_step_size; |
| data &= 0x0ff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); |
| data = (pout->ssc_step_size >> 8); |
| data &= 0x0ff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); |
| |
| data = (pin->ssc_center & 0x01); |
| data <<= 1; |
| data |= 0x01; /* enable */ |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); |
| |
| wmb(); /* make sure register committed */ |
| } |
| |
| static void pll_db_commit_common(struct dsi_pll_14nm *pll, |
| struct dsi_pll_input *pin, |
| struct dsi_pll_output *pout) |
| { |
| void __iomem *base = pll->mmio; |
| u8 data; |
| |
| /* confgiure the non frequency dependent pll registers */ |
| data = 0; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); |
| |
| data = pout->pll_txclk_en; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); |
| |
| data = pout->pll_resetsm_cntrl; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); |
| data = pout->pll_resetsm_cntrl2; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); |
| data = pout->pll_resetsm_cntrl5; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); |
| |
| data = pout->pll_vco_div_ref & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); |
| data = (pout->pll_vco_div_ref >> 8) & 0x3; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); |
| |
| data = pout->pll_kvco_div_ref & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); |
| data = (pout->pll_kvco_div_ref >> 8) & 0x3; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); |
| |
| data = pout->pll_misc1; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); |
| |
| data = pin->pll_ie_trim; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); |
| |
| data = pin->pll_ip_trim; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); |
| |
| data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); |
| |
| data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); |
| |
| data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); |
| |
| data = pin->pll_icpmset << 3 | pin->pll_icpcset; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); |
| |
| data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); |
| |
| data = pin->pll_iptat_trim; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); |
| |
| data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); |
| } |
| |
| static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) |
| { |
| void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; |
| |
| /* de assert pll start and apply pll sw reset */ |
| |
| /* stop pll */ |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); |
| |
| /* pll sw reset */ |
| pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10); |
| wmb(); /* make sure register committed */ |
| |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0); |
| wmb(); /* make sure register committed */ |
| } |
| |
| static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, |
| struct dsi_pll_input *pin, |
| struct dsi_pll_output *pout) |
| { |
| void __iomem *base = pll->mmio; |
| void __iomem *cmn_base = pll->phy_cmn_mmio; |
| u8 data; |
| |
| DBG("DSI%d PLL", pll->id); |
| |
| data = pout->cmn_ldo_cntrl; |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); |
| |
| pll_db_commit_common(pll, pin, pout); |
| |
| pll_14nm_software_reset(pll); |
| |
| data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); |
| |
| data = 0xff; /* data, clk, pll normal operation */ |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); |
| |
| /* configure the frequency dependent pll registers */ |
| data = pout->dec_start; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); |
| |
| data = pout->div_frac_start & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); |
| data = (pout->div_frac_start >> 8) & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); |
| data = (pout->div_frac_start >> 16) & 0xf; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); |
| |
| data = pout->plllock_cmp & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); |
| |
| data = (pout->plllock_cmp >> 8) & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); |
| |
| data = (pout->plllock_cmp >> 16) & 0x3; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); |
| |
| data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); |
| |
| data = pout->pll_vco_count & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); |
| data = (pout->pll_vco_count >> 8) & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); |
| |
| data = pout->pll_kvco_count & 0xff; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); |
| data = (pout->pll_kvco_count >> 8) & 0x3; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); |
| |
| data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); |
| |
| if (pin->ssc_en) |
| pll_db_commit_ssc(pll); |
| |
| wmb(); /* make sure register committed */ |
| } |
| |
| /* |
| * VCO clock Callbacks |
| */ |
| static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct msm_dsi_pll *pll = hw_clk_to_pll(hw); |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| struct dsi_pll_input *pin = &pll_14nm->in; |
| struct dsi_pll_output *pout = &pll_14nm->out; |
| |
| DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate, |
| parent_rate); |
| |
| pll_14nm->vco_current_rate = rate; |
| pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; |
| |
| dsi_pll_14nm_input_init(pll_14nm); |
| |
| /* |
| * This configures the post divider internal to the VCO. It's |
| * fixed to divide by 1 for now. |
| * |
| * tx_band = pll_postdiv. |
| * 0: divided by 1 |
| * 1: divided by 2 |
| * 2: divided by 4 |
| * 3: divided by 8 |
| */ |
| pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; |
| |
| pll_14nm_dec_frac_calc(pll_14nm); |
| |
| if (pin->ssc_en) |
| pll_14nm_ssc_calc(pll_14nm); |
| |
| pll_14nm_calc_vco_count(pll_14nm); |
| |
| /* commit the slave DSI PLL registers if we're master. Note that we |
| * don't lock the slave PLL. We just ensure that the PLL/PHY registers |
| * of the master and slave are identical |
| */ |
| if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { |
| struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; |
| |
| pll_db_commit_14nm(pll_14nm_slave, pin, pout); |
| } |
| |
| pll_db_commit_14nm(pll_14nm, pin, pout); |
| |
| return 0; |
| } |
| |
| static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct msm_dsi_pll *pll = hw_clk_to_pll(hw); |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| void __iomem *base = pll_14nm->mmio; |
| u64 vco_rate, multiplier = BIT(20); |
| u32 div_frac_start; |
| u32 dec_start; |
| u64 ref_clk = parent_rate; |
| |
| dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START); |
| dec_start &= 0x0ff; |
| |
| DBG("dec_start = %x", dec_start); |
| |
| div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3) |
| & 0xf) << 16; |
| div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2) |
| & 0xff) << 8; |
| div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1) |
| & 0xff; |
| |
| DBG("div_frac_start = %x", div_frac_start); |
| |
| vco_rate = ref_clk * dec_start; |
| |
| vco_rate += ((ref_clk * div_frac_start) / multiplier); |
| |
| /* |
| * Recalculating the rate from dec_start and frac_start doesn't end up |
| * the rate we originally set. Convert the freq to KHz, round it up and |
| * convert it back to MHz. |
| */ |
| vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000; |
| |
| DBG("returning vco rate = %lu", (unsigned long)vco_rate); |
| |
| return (unsigned long)vco_rate; |
| } |
| |
| static const struct clk_ops clk_ops_dsi_pll_14nm_vco = { |
| .round_rate = msm_dsi_pll_helper_clk_round_rate, |
| .set_rate = dsi_pll_14nm_vco_set_rate, |
| .recalc_rate = dsi_pll_14nm_vco_recalc_rate, |
| .prepare = msm_dsi_pll_helper_clk_prepare, |
| .unprepare = msm_dsi_pll_helper_clk_unprepare, |
| }; |
| |
| /* |
| * N1 and N2 post-divider clock callbacks |
| */ |
| #define div_mask(width) ((1 << (width)) - 1) |
| static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); |
| struct dsi_pll_14nm *pll_14nm = postdiv->pll; |
| void __iomem *base = pll_14nm->phy_cmn_mmio; |
| u8 shift = postdiv->shift; |
| u8 width = postdiv->width; |
| u32 val; |
| |
| DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate); |
| |
| val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift; |
| val &= div_mask(width); |
| |
| return divider_recalc_rate(hw, parent_rate, val, NULL, |
| postdiv->flags, width); |
| } |
| |
| static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long *prate) |
| { |
| struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); |
| struct dsi_pll_14nm *pll_14nm = postdiv->pll; |
| |
| DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate); |
| |
| return divider_round_rate(hw, rate, prate, NULL, |
| postdiv->width, |
| postdiv->flags); |
| } |
| |
| static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); |
| struct dsi_pll_14nm *pll_14nm = postdiv->pll; |
| void __iomem *base = pll_14nm->phy_cmn_mmio; |
| spinlock_t *lock = &pll_14nm->postdiv_lock; |
| u8 shift = postdiv->shift; |
| u8 width = postdiv->width; |
| unsigned int value; |
| unsigned long flags = 0; |
| u32 val; |
| |
| DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate, |
| parent_rate); |
| |
| value = divider_get_val(rate, parent_rate, NULL, postdiv->width, |
| postdiv->flags); |
| |
| spin_lock_irqsave(lock, flags); |
| |
| val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); |
| val &= ~(div_mask(width) << shift); |
| |
| val |= value << shift; |
| pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); |
| |
| /* If we're master in dual DSI mode, then the slave PLL's post-dividers |
| * follow the master's post dividers |
| */ |
| if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { |
| struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; |
| void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; |
| |
| pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); |
| } |
| |
| spin_unlock_irqrestore(lock, flags); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = { |
| .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate, |
| .round_rate = dsi_pll_14nm_postdiv_round_rate, |
| .set_rate = dsi_pll_14nm_postdiv_set_rate, |
| }; |
| |
| /* |
| * PLL Callbacks |
| */ |
| |
| static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| void __iomem *base = pll_14nm->mmio; |
| void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; |
| bool locked; |
| |
| DBG(""); |
| |
| pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10); |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1); |
| |
| locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS, |
| POLL_TIMEOUT_US); |
| |
| if (unlikely(!locked)) |
| dev_err(&pll_14nm->pdev->dev, "DSI PLL lock failed\n"); |
| else |
| DBG("DSI PLL lock success"); |
| |
| return locked ? 0 : -EINVAL; |
| } |
| |
| static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; |
| |
| DBG(""); |
| |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); |
| } |
| |
| static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; |
| void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; |
| u32 data; |
| |
| data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); |
| |
| cached_state->n1postdiv = data & 0xf; |
| cached_state->n2postdiv = (data >> 4) & 0xf; |
| |
| DBG("DSI%d PLL save state %x %x", pll_14nm->id, |
| cached_state->n1postdiv, cached_state->n2postdiv); |
| |
| cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); |
| } |
| |
| static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; |
| void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; |
| u32 data; |
| int ret; |
| |
| ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw, |
| cached_state->vco_rate, 0); |
| if (ret) { |
| dev_err(&pll_14nm->pdev->dev, |
| "restore vco rate failed. ret=%d\n", ret); |
| return ret; |
| } |
| |
| data = cached_state->n1postdiv | (cached_state->n2postdiv << 4); |
| |
| DBG("DSI%d PLL restore state %x %x", pll_14nm->id, |
| cached_state->n1postdiv, cached_state->n2postdiv); |
| |
| pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); |
| |
| /* also restore post-dividers for slave DSI PLL */ |
| if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { |
| struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; |
| void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; |
| |
| pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); |
| } |
| |
| return 0; |
| } |
| |
| static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll, |
| enum msm_dsi_phy_usecase uc) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| void __iomem *base = pll_14nm->mmio; |
| u32 clkbuflr_en, bandgap = 0; |
| |
| switch (uc) { |
| case MSM_DSI_PHY_STANDALONE: |
| clkbuflr_en = 0x1; |
| break; |
| case MSM_DSI_PHY_MASTER: |
| clkbuflr_en = 0x3; |
| pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX]; |
| break; |
| case MSM_DSI_PHY_SLAVE: |
| clkbuflr_en = 0x0; |
| bandgap = 0x3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en); |
| if (bandgap) |
| pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap); |
| |
| pll_14nm->uc = uc; |
| |
| return 0; |
| } |
| |
| static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll, |
| struct clk **byte_clk_provider, |
| struct clk **pixel_clk_provider) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data; |
| |
| if (byte_clk_provider) |
| *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; |
| if (pixel_clk_provider) |
| *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; |
| |
| return 0; |
| } |
| |
| static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll) |
| { |
| struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); |
| struct platform_device *pdev = pll_14nm->pdev; |
| int num_hws = pll_14nm->num_hws; |
| |
| of_clk_del_provider(pdev->dev.of_node); |
| |
| while (num_hws--) |
| clk_hw_unregister(pll_14nm->hws[num_hws]); |
| } |
| |
| static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm, |
| const char *name, |
| const char *parent_name, |
| unsigned long flags, |
| u8 shift) |
| { |
| struct dsi_pll_14nm_postdiv *pll_postdiv; |
| struct device *dev = &pll_14nm->pdev->dev; |
| struct clk_init_data postdiv_init = { |
| .parent_names = (const char *[]) { parent_name }, |
| .num_parents = 1, |
| .name = name, |
| .flags = flags, |
| .ops = &clk_ops_dsi_pll_14nm_postdiv, |
| }; |
| int ret; |
| |
| pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL); |
| if (!pll_postdiv) |
| return ERR_PTR(-ENOMEM); |
| |
| pll_postdiv->pll = pll_14nm; |
| pll_postdiv->shift = shift; |
| /* both N1 and N2 postdividers are 4 bits wide */ |
| pll_postdiv->width = 4; |
| /* range of each divider is from 1 to 15 */ |
| pll_postdiv->flags = CLK_DIVIDER_ONE_BASED; |
| pll_postdiv->hw.init = &postdiv_init; |
| |
| ret = clk_hw_register(dev, &pll_postdiv->hw); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return &pll_postdiv->hw; |
| } |
| |
| static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm) |
| { |
| char clk_name[32], parent[32], vco_name[32]; |
| struct clk_init_data vco_init = { |
| .parent_names = (const char *[]){ "xo" }, |
| .num_parents = 1, |
| .name = vco_name, |
| .flags = CLK_IGNORE_UNUSED, |
| .ops = &clk_ops_dsi_pll_14nm_vco, |
| }; |
| struct device *dev = &pll_14nm->pdev->dev; |
| struct clk_hw **hws = pll_14nm->hws; |
| struct clk_hw_onecell_data *hw_data; |
| struct clk_hw *hw; |
| int num = 0; |
| int ret; |
| |
| DBG("DSI%d", pll_14nm->id); |
| |
| hw_data = devm_kzalloc(dev, sizeof(*hw_data) + |
| NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), |
| GFP_KERNEL); |
| if (!hw_data) |
| return -ENOMEM; |
| |
| snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id); |
| pll_14nm->base.clk_hw.init = &vco_init; |
| |
| ret = clk_hw_register(dev, &pll_14nm->base.clk_hw); |
| if (ret) |
| return ret; |
| |
| hws[num++] = &pll_14nm->base.clk_hw; |
| |
| snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); |
| snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id); |
| |
| /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */ |
| hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, |
| CLK_SET_RATE_PARENT, 0); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| hws[num++] = hw; |
| |
| snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id); |
| snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); |
| |
| /* DSI Byte clock = VCO_CLK / N1 / 8 */ |
| hw = clk_hw_register_fixed_factor(dev, clk_name, parent, |
| CLK_SET_RATE_PARENT, 1, 8); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| hws[num++] = hw; |
| hw_data->hws[DSI_BYTE_PLL_CLK] = hw; |
| |
| snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); |
| snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); |
| |
| /* |
| * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider |
| * on the way. Don't let it set parent. |
| */ |
| hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| hws[num++] = hw; |
| |
| snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id); |
| snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); |
| |
| /* DSI pixel clock = VCO_CLK / N1 / 2 / N2 |
| * This is the output of N2 post-divider, bits 4-7 in |
| * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent. |
| */ |
| hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| hws[num++] = hw; |
| hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; |
| |
| pll_14nm->num_hws = num; |
| |
| hw_data->num = NUM_PROVIDED_CLKS; |
| pll_14nm->hw_data = hw_data; |
| |
| ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, |
| pll_14nm->hw_data); |
| if (ret) { |
| dev_err(dev, "failed to register clk provider: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id) |
| { |
| struct dsi_pll_14nm *pll_14nm; |
| struct msm_dsi_pll *pll; |
| int ret; |
| |
| if (!pdev) |
| return ERR_PTR(-ENODEV); |
| |
| pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL); |
| if (!pll_14nm) |
| return ERR_PTR(-ENOMEM); |
| |
| DBG("PLL%d", id); |
| |
| pll_14nm->pdev = pdev; |
| pll_14nm->id = id; |
| pll_14nm_list[id] = pll_14nm; |
| |
| pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); |
| if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) { |
| dev_err(&pdev->dev, "failed to map CMN PHY base\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); |
| if (IS_ERR_OR_NULL(pll_14nm->mmio)) { |
| dev_err(&pdev->dev, "failed to map PLL base\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| spin_lock_init(&pll_14nm->postdiv_lock); |
| |
| pll = &pll_14nm->base; |
| pll->min_rate = VCO_MIN_RATE; |
| pll->max_rate = VCO_MAX_RATE; |
| pll->get_provider = dsi_pll_14nm_get_provider; |
| pll->destroy = dsi_pll_14nm_destroy; |
| pll->disable_seq = dsi_pll_14nm_disable_seq; |
| pll->save_state = dsi_pll_14nm_save_state; |
| pll->restore_state = dsi_pll_14nm_restore_state; |
| pll->set_usecase = dsi_pll_14nm_set_usecase; |
| |
| pll_14nm->vco_delay = 1; |
| |
| pll->en_seq_cnt = 1; |
| pll->enable_seqs[0] = dsi_pll_14nm_enable_seq; |
| |
| ret = pll_14nm_register(pll_14nm); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register PLL: %d\n", ret); |
| return ERR_PTR(ret); |
| } |
| |
| return pll; |
| } |