blob: 47376d4d071f853cb013873766a99460268ed9cb [file] [log] [blame]
/* QLogic qed NIC Driver
* Copyright (c) 2015-2017 QLogic Corporation
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and /or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _QED_DEV_API_H
#define _QED_DEV_API_H
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/qed/qed_chain.h>
#include <linux/qed/qed_if.h>
#include "qed_int.h"
/**
* @brief qed_init_dp - initialize the debug level
*
* @param cdev
* @param dp_module
* @param dp_level
*/
void qed_init_dp(struct qed_dev *cdev,
u32 dp_module,
u8 dp_level);
/**
* @brief qed_init_struct - initialize the device structure to
* its defaults
*
* @param cdev
*/
void qed_init_struct(struct qed_dev *cdev);
/**
* @brief qed_resc_free -
*
* @param cdev
*/
void qed_resc_free(struct qed_dev *cdev);
/**
* @brief qed_resc_alloc -
*
* @param cdev
*
* @return int
*/
int qed_resc_alloc(struct qed_dev *cdev);
/**
* @brief qed_resc_setup -
*
* @param cdev
*/
void qed_resc_setup(struct qed_dev *cdev);
enum qed_override_force_load {
QED_OVERRIDE_FORCE_LOAD_NONE,
QED_OVERRIDE_FORCE_LOAD_ALWAYS,
QED_OVERRIDE_FORCE_LOAD_NEVER,
};
struct qed_drv_load_params {
/* Indicates whether the driver is running over a crash kernel.
* As part of the load request, this will be used for providing the
* driver role to the MFW.
* In case of a crash kernel over PDA - this should be set to false.
*/
bool is_crash_kernel;
/* The timeout value that the MFW should use when locking the engine for
* the driver load process.
* A value of '0' means the default value, and '255' means no timeout.
*/
u8 mfw_timeout_val;
#define QED_LOAD_REQ_LOCK_TO_DEFAULT 0
#define QED_LOAD_REQ_LOCK_TO_NONE 255
/* Avoid engine reset when first PF loads on it */
bool avoid_eng_reset;
/* Allow overriding the default force load behavior */
enum qed_override_force_load override_force_load;
};
struct qed_hw_init_params {
/* Tunneling parameters */
struct qed_tunnel_info *p_tunn;
bool b_hw_start;
/* Interrupt mode [msix, inta, etc.] to use */
enum qed_int_mode int_mode;
/* NPAR tx switching to be used for vports for tx-switching */
bool allow_npar_tx_switch;
/* Binary fw data pointer in binary fw file */
const u8 *bin_fw_data;
/* Driver load parameters */
struct qed_drv_load_params *p_drv_load_params;
};
/**
* @brief qed_hw_init -
*
* @param cdev
* @param p_params
*
* @return int
*/
int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params);
/**
* @brief qed_hw_timers_stop_all - stop the timers HW block
*
* @param cdev
*
* @return void
*/
void qed_hw_timers_stop_all(struct qed_dev *cdev);
/**
* @brief qed_hw_stop -
*
* @param cdev
*
* @return int
*/
int qed_hw_stop(struct qed_dev *cdev);
/**
* @brief qed_hw_stop_fastpath -should be called incase
* slowpath is still required for the device,
* but fastpath is not.
*
* @param cdev
*
* @return int
*/
int qed_hw_stop_fastpath(struct qed_dev *cdev);
/**
* @brief qed_hw_start_fastpath -restart fastpath traffic,
* only if hw_stop_fastpath was called
*
* @param p_hwfn
*
* @return int
*/
int qed_hw_start_fastpath(struct qed_hwfn *p_hwfn);
/**
* @brief qed_hw_prepare -
*
* @param cdev
* @param personality - personality to initialize
*
* @return int
*/
int qed_hw_prepare(struct qed_dev *cdev,
int personality);
/**
* @brief qed_hw_remove -
*
* @param cdev
*/
void qed_hw_remove(struct qed_dev *cdev);
/**
* @brief qed_ptt_acquire - Allocate a PTT window
*
* Should be called at the entry point to the driver (at the beginning of an
* exported function)
*
* @param p_hwfn
*
* @return struct qed_ptt
*/
struct qed_ptt *qed_ptt_acquire(struct qed_hwfn *p_hwfn);
/**
* @brief qed_ptt_release - Release PTT Window
*
* Should be called at the end of a flow - at the end of the function that
* acquired the PTT.
*
*
* @param p_hwfn
* @param p_ptt
*/
void qed_ptt_release(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt);
void qed_reset_vport_stats(struct qed_dev *cdev);
enum qed_dmae_address_type_t {
QED_DMAE_ADDRESS_HOST_VIRT,
QED_DMAE_ADDRESS_HOST_PHYS,
QED_DMAE_ADDRESS_GRC
};
/* value of flags If QED_DMAE_FLAG_RW_REPL_SRC flag is set and the
* source is a block of length DMAE_MAX_RW_SIZE and the
* destination is larger, the source block will be duplicated as
* many times as required to fill the destination block. This is
* used mostly to write a zeroed buffer to destination address
* using DMA
*/
#define QED_DMAE_FLAG_RW_REPL_SRC 0x00000001
#define QED_DMAE_FLAG_VF_SRC 0x00000002
#define QED_DMAE_FLAG_VF_DST 0x00000004
#define QED_DMAE_FLAG_COMPLETION_DST 0x00000008
#define QED_DMAE_FLAG_PORT 0x00000010
#define QED_DMAE_FLAG_PF_SRC 0x00000020
#define QED_DMAE_FLAG_PF_DST 0x00000040
struct qed_dmae_params {
u32 flags; /* consists of QED_DMAE_FLAG_* values */
u8 src_vfid;
u8 dst_vfid;
u8 port_id;
u8 src_pfid;
u8 dst_pfid;
};
/**
* @brief qed_dmae_host2grc - copy data from source addr to
* dmae registers using the given ptt
*
* @param p_hwfn
* @param p_ptt
* @param source_addr
* @param grc_addr (dmae_data_offset)
* @param size_in_dwords
* @param p_params (default parameters will be used in case of NULL)
*/
int
qed_dmae_host2grc(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
u64 source_addr,
u32 grc_addr,
u32 size_in_dwords,
struct qed_dmae_params *p_params);
/**
* @brief qed_dmae_grc2host - Read data from dmae data offset
* to source address using the given ptt
*
* @param p_ptt
* @param grc_addr (dmae_data_offset)
* @param dest_addr
* @param size_in_dwords
* @param p_params (default parameters will be used in case of NULL)
*/
int qed_dmae_grc2host(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
u32 grc_addr, dma_addr_t dest_addr, u32 size_in_dwords,
struct qed_dmae_params *p_params);
/**
* @brief qed_dmae_host2host - copy data from to source address
* to a destination adress (for SRIOV) using the given ptt
*
* @param p_hwfn
* @param p_ptt
* @param source_addr
* @param dest_addr
* @param size_in_dwords
* @param p_params (default parameters will be used in case of NULL)
*/
int qed_dmae_host2host(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
dma_addr_t source_addr,
dma_addr_t dest_addr,
u32 size_in_dwords, struct qed_dmae_params *p_params);
/**
* @brief qed_chain_alloc - Allocate and initialize a chain
*
* @param p_hwfn
* @param intended_use
* @param mode
* @param num_elems
* @param elem_size
* @param p_chain
* @param ext_pbl - a possible external PBL
*
* @return int
*/
int
qed_chain_alloc(struct qed_dev *cdev,
enum qed_chain_use_mode intended_use,
enum qed_chain_mode mode,
enum qed_chain_cnt_type cnt_type,
u32 num_elems,
size_t elem_size,
struct qed_chain *p_chain, struct qed_chain_ext_pbl *ext_pbl);
/**
* @brief qed_chain_free - Free chain DMA memory
*
* @param p_hwfn
* @param p_chain
*/
void qed_chain_free(struct qed_dev *cdev, struct qed_chain *p_chain);
/**
* @@brief qed_fw_l2_queue - Get absolute L2 queue ID
*
* @param p_hwfn
* @param src_id - relative to p_hwfn
* @param dst_id - absolute per engine
*
* @return int
*/
int qed_fw_l2_queue(struct qed_hwfn *p_hwfn,
u16 src_id,
u16 *dst_id);
/**
* @@brief qed_fw_vport - Get absolute vport ID
*
* @param p_hwfn
* @param src_id - relative to p_hwfn
* @param dst_id - absolute per engine
*
* @return int
*/
int qed_fw_vport(struct qed_hwfn *p_hwfn,
u8 src_id,
u8 *dst_id);
/**
* @@brief qed_fw_rss_eng - Get absolute RSS engine ID
*
* @param p_hwfn
* @param src_id - relative to p_hwfn
* @param dst_id - absolute per engine
*
* @return int
*/
int qed_fw_rss_eng(struct qed_hwfn *p_hwfn,
u8 src_id,
u8 *dst_id);
/**
* @brief qed_llh_get_num_ppfid - Return the allocated number of LLH filter
* banks that are allocated to the PF.
*
* @param cdev
*
* @return u8 - Number of LLH filter banks
*/
u8 qed_llh_get_num_ppfid(struct qed_dev *cdev);
enum qed_eng {
QED_ENG0,
QED_ENG1,
QED_BOTH_ENG,
};
/**
* @brief qed_llh_set_ppfid_affinity - Set the engine affinity for the given
* LLH filter bank.
*
* @param cdev
* @param ppfid - relative within the allocated ppfids ('0' is the default one).
* @param eng
*
* @return int
*/
int qed_llh_set_ppfid_affinity(struct qed_dev *cdev,
u8 ppfid, enum qed_eng eng);
/**
* @brief qed_llh_set_roce_affinity - Set the RoCE engine affinity
*
* @param cdev
* @param eng
*
* @return int
*/
int qed_llh_set_roce_affinity(struct qed_dev *cdev, enum qed_eng eng);
/**
* @brief qed_llh_add_mac_filter - Add a LLH MAC filter into the given filter
* bank.
*
* @param cdev
* @param ppfid - relative within the allocated ppfids ('0' is the default one).
* @param mac_addr - MAC to add
*/
int qed_llh_add_mac_filter(struct qed_dev *cdev,
u8 ppfid, u8 mac_addr[ETH_ALEN]);
/**
* @brief qed_llh_remove_mac_filter - Remove a LLH MAC filter from the given
* filter bank.
*
* @param p_ptt
* @param p_filter - MAC to remove
*/
void qed_llh_remove_mac_filter(struct qed_dev *cdev,
u8 ppfid, u8 mac_addr[ETH_ALEN]);
enum qed_llh_prot_filter_type_t {
QED_LLH_FILTER_ETHERTYPE,
QED_LLH_FILTER_TCP_SRC_PORT,
QED_LLH_FILTER_TCP_DEST_PORT,
QED_LLH_FILTER_TCP_SRC_AND_DEST_PORT,
QED_LLH_FILTER_UDP_SRC_PORT,
QED_LLH_FILTER_UDP_DEST_PORT,
QED_LLH_FILTER_UDP_SRC_AND_DEST_PORT
};
/**
* @brief qed_llh_add_protocol_filter - Add a LLH protocol filter into the
* given filter bank.
*
* @param cdev
* @param ppfid - relative within the allocated ppfids ('0' is the default one).
* @param type - type of filters and comparing
* @param source_port_or_eth_type - source port or ethertype to add
* @param dest_port - destination port to add
* @param type - type of filters and comparing
*/
int
qed_llh_add_protocol_filter(struct qed_dev *cdev,
u8 ppfid,
enum qed_llh_prot_filter_type_t type,
u16 source_port_or_eth_type, u16 dest_port);
/**
* @brief qed_llh_remove_protocol_filter - Remove a LLH protocol filter from
* the given filter bank.
*
* @param cdev
* @param ppfid - relative within the allocated ppfids ('0' is the default one).
* @param type - type of filters and comparing
* @param source_port_or_eth_type - source port or ethertype to add
* @param dest_port - destination port to add
*/
void
qed_llh_remove_protocol_filter(struct qed_dev *cdev,
u8 ppfid,
enum qed_llh_prot_filter_type_t type,
u16 source_port_or_eth_type, u16 dest_port);
/**
* *@brief Cleanup of previous driver remains prior to load
*
* @param p_hwfn
* @param p_ptt
* @param id - For PF, engine-relative. For VF, PF-relative.
* @param is_vf - true iff cleanup is made for a VF.
*
* @return int
*/
int qed_final_cleanup(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt, u16 id, bool is_vf);
/**
* @brief qed_get_queue_coalesce - Retrieve coalesce value for a given queue.
*
* @param p_hwfn
* @param p_coal - store coalesce value read from the hardware.
* @param p_handle
*
* @return int
**/
int qed_get_queue_coalesce(struct qed_hwfn *p_hwfn, u16 *coal, void *handle);
/**
* @brief qed_set_queue_coalesce - Configure coalesce parameters for Rx and
* Tx queue. The fact that we can configure coalescing to up to 511, but on
* varying accuracy [the bigger the value the less accurate] up to a mistake
* of 3usec for the highest values.
* While the API allows setting coalescing per-qid, all queues sharing a SB
* should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
* otherwise configuration would break.
*
*
* @param rx_coal - Rx Coalesce value in micro seconds.
* @param tx_coal - TX Coalesce value in micro seconds.
* @param p_handle
*
* @return int
**/
int
qed_set_queue_coalesce(u16 rx_coal, u16 tx_coal, void *p_handle);
/**
* @brief qed_pglueb_set_pfid_enable - Enable or disable PCI BUS MASTER
*
* @param p_hwfn
* @param p_ptt
* @param b_enable - true/false
*
* @return int
*/
int qed_pglueb_set_pfid_enable(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt, bool b_enable);
/**
* @brief db_recovery_add - add doorbell information to the doorbell
* recovery mechanism.
*
* @param cdev
* @param db_addr - doorbell address
* @param db_data - address of where db_data is stored
* @param db_width - doorbell is 32b pr 64b
* @param db_space - doorbell recovery addresses are user or kernel space
*/
int qed_db_recovery_add(struct qed_dev *cdev,
void __iomem *db_addr,
void *db_data,
enum qed_db_rec_width db_width,
enum qed_db_rec_space db_space);
/**
* @brief db_recovery_del - remove doorbell information from the doorbell
* recovery mechanism. db_data serves as key (db_addr is not unique).
*
* @param cdev
* @param db_addr - doorbell address
* @param db_data - address where db_data is stored. Serves as key for the
* entry to delete.
*/
int qed_db_recovery_del(struct qed_dev *cdev,
void __iomem *db_addr, void *db_data);
const char *qed_hw_get_resc_name(enum qed_resources res_id);
#endif