| /* |
| * linux/drivers/video/mbx/mbxfb.c |
| * |
| * Copyright (C) 2006-2007 8D Technologies inc |
| * Raphael Assenat <raph@8d.com> |
| * - Added video overlay support |
| * - Various improvements |
| * |
| * Copyright (C) 2006 Compulab, Ltd. |
| * Mike Rapoport <mike@compulab.co.il> |
| * - Creation of driver |
| * |
| * Based on pxafb.c |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| * |
| * Intel 2700G (Marathon) Graphics Accelerator Frame Buffer Driver |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| |
| #include <video/mbxfb.h> |
| |
| #include "regs.h" |
| #include "reg_bits.h" |
| |
| static void __iomem *virt_base_2700; |
| |
| #define write_reg(val, reg) do { writel((val), (reg)); } while(0) |
| |
| /* Without this delay, the graphics appears somehow scaled and |
| * there is a lot of jitter in scanlines. This delay is probably |
| * needed only after setting some specific register(s) somewhere, |
| * not all over the place... */ |
| #define write_reg_dly(val, reg) do { writel((val), reg); udelay(1000); } while(0) |
| |
| #define MIN_XRES 16 |
| #define MIN_YRES 16 |
| #define MAX_XRES 2048 |
| #define MAX_YRES 2048 |
| |
| #define MAX_PALETTES 16 |
| |
| /* FIXME: take care of different chip revisions with different sizes |
| of ODFB */ |
| #define MEMORY_OFFSET 0x60000 |
| |
| struct mbxfb_info { |
| struct device *dev; |
| |
| struct resource *fb_res; |
| struct resource *fb_req; |
| |
| struct resource *reg_res; |
| struct resource *reg_req; |
| |
| void __iomem *fb_virt_addr; |
| unsigned long fb_phys_addr; |
| |
| void __iomem *reg_virt_addr; |
| unsigned long reg_phys_addr; |
| |
| int (*platform_probe) (struct fb_info * fb); |
| int (*platform_remove) (struct fb_info * fb); |
| |
| u32 pseudo_palette[MAX_PALETTES]; |
| #ifdef CONFIG_FB_MBX_DEBUG |
| struct dentry *debugfs_dir; |
| #endif |
| |
| }; |
| |
| static const struct fb_var_screeninfo mbxfb_default = { |
| .xres = 640, |
| .yres = 480, |
| .xres_virtual = 640, |
| .yres_virtual = 480, |
| .bits_per_pixel = 16, |
| .red = {11, 5, 0}, |
| .green = {5, 6, 0}, |
| .blue = {0, 5, 0}, |
| .activate = FB_ACTIVATE_TEST, |
| .height = -1, |
| .width = -1, |
| .pixclock = 40000, |
| .left_margin = 48, |
| .right_margin = 16, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| .hsync_len = 96, |
| .vsync_len = 2, |
| .vmode = FB_VMODE_NONINTERLACED, |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| }; |
| |
| static const struct fb_fix_screeninfo mbxfb_fix = { |
| .id = "MBX", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_TRUECOLOR, |
| .xpanstep = 0, |
| .ypanstep = 0, |
| .ywrapstep = 0, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| struct pixclock_div { |
| u8 m; |
| u8 n; |
| u8 p; |
| }; |
| |
| static unsigned int mbxfb_get_pixclock(unsigned int pixclock_ps, |
| struct pixclock_div *div) |
| { |
| u8 m, n, p; |
| unsigned int err = 0; |
| unsigned int min_err = ~0x0; |
| unsigned int clk; |
| unsigned int best_clk = 0; |
| unsigned int ref_clk = 13000; /* FIXME: take from platform data */ |
| unsigned int pixclock; |
| |
| /* convert pixclock to KHz */ |
| pixclock = PICOS2KHZ(pixclock_ps); |
| |
| /* PLL output freq = (ref_clk * M) / (N * 2^P) |
| * |
| * M: 1 to 63 |
| * N: 1 to 7 |
| * P: 0 to 7 |
| */ |
| |
| /* RAPH: When N==1, the resulting pixel clock appears to |
| * get divided by 2. Preventing N=1 by starting the following |
| * loop at 2 prevents this. Is this a bug with my chip |
| * revision or something I dont understand? */ |
| for (m = 1; m < 64; m++) { |
| for (n = 2; n < 8; n++) { |
| for (p = 0; p < 8; p++) { |
| clk = (ref_clk * m) / (n * (1 << p)); |
| err = (clk > pixclock) ? (clk - pixclock) : |
| (pixclock - clk); |
| if (err < min_err) { |
| min_err = err; |
| best_clk = clk; |
| div->m = m; |
| div->n = n; |
| div->p = p; |
| } |
| } |
| } |
| } |
| return KHZ2PICOS(best_clk); |
| } |
| |
| static int mbxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int trans, struct fb_info *info) |
| { |
| u32 val, ret = 1; |
| |
| if (regno < MAX_PALETTES) { |
| u32 *pal = info->pseudo_palette; |
| |
| val = (red & 0xf800) | ((green & 0xfc00) >> 5) | |
| ((blue & 0xf800) >> 11); |
| pal[regno] = val; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int mbxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct pixclock_div div; |
| |
| var->pixclock = mbxfb_get_pixclock(var->pixclock, &div); |
| |
| if (var->xres < MIN_XRES) |
| var->xres = MIN_XRES; |
| if (var->yres < MIN_YRES) |
| var->yres = MIN_YRES; |
| if (var->xres > MAX_XRES) |
| return -EINVAL; |
| if (var->yres > MAX_YRES) |
| return -EINVAL; |
| var->xres_virtual = max(var->xres_virtual, var->xres); |
| var->yres_virtual = max(var->yres_virtual, var->yres); |
| |
| switch (var->bits_per_pixel) { |
| /* 8 bits-per-pixel is not supported yet */ |
| case 8: |
| return -EINVAL; |
| case 16: |
| var->green.length = (var->green.length == 5) ? 5 : 6; |
| var->red.length = 5; |
| var->blue.length = 5; |
| var->transp.length = 6 - var->green.length; |
| var->blue.offset = 0; |
| var->green.offset = 5; |
| var->red.offset = 5 + var->green.length; |
| var->transp.offset = (5 + var->red.offset) & 15; |
| break; |
| case 24: /* RGB 888 */ |
| case 32: /* RGBA 8888 */ |
| var->red.offset = 16; |
| var->red.length = 8; |
| var->green.offset = 8; |
| var->green.length = 8; |
| var->blue.offset = 0; |
| var->blue.length = 8; |
| var->transp.length = var->bits_per_pixel - 24; |
| var->transp.offset = (var->transp.length) ? 24 : 0; |
| break; |
| } |
| var->red.msb_right = 0; |
| var->green.msb_right = 0; |
| var->blue.msb_right = 0; |
| var->transp.msb_right = 0; |
| |
| return 0; |
| } |
| |
| static int mbxfb_set_par(struct fb_info *info) |
| { |
| struct fb_var_screeninfo *var = &info->var; |
| struct pixclock_div div; |
| ushort hbps, ht, hfps, has; |
| ushort vbps, vt, vfps, vas; |
| u32 gsctrl = readl(GSCTRL); |
| u32 gsadr = readl(GSADR); |
| |
| info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| |
| /* setup color mode */ |
| gsctrl &= ~(FMsk(GSCTRL_GPIXFMT)); |
| /* FIXME: add *WORKING* support for 8-bits per color */ |
| if (info->var.bits_per_pixel == 8) { |
| return -EINVAL; |
| } else { |
| fb_dealloc_cmap(&info->cmap); |
| gsctrl &= ~GSCTRL_LUT_EN; |
| |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| switch (info->var.bits_per_pixel) { |
| case 16: |
| if (info->var.green.length == 5) |
| gsctrl |= GSCTRL_GPIXFMT_ARGB1555; |
| else |
| gsctrl |= GSCTRL_GPIXFMT_RGB565; |
| break; |
| case 24: |
| gsctrl |= GSCTRL_GPIXFMT_RGB888; |
| break; |
| case 32: |
| gsctrl |= GSCTRL_GPIXFMT_ARGB8888; |
| break; |
| } |
| } |
| |
| /* setup resolution */ |
| gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT)); |
| gsctrl |= Gsctrl_Width(info->var.xres) | |
| Gsctrl_Height(info->var.yres); |
| write_reg_dly(gsctrl, GSCTRL); |
| |
| gsadr &= ~(FMsk(GSADR_SRCSTRIDE)); |
| gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel / |
| (8 * 16) - 1); |
| write_reg_dly(gsadr, GSADR); |
| |
| /* setup timings */ |
| var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div); |
| |
| write_reg_dly((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) | |
| Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL); |
| |
| hbps = var->hsync_len; |
| has = hbps + var->left_margin; |
| hfps = has + var->xres; |
| ht = hfps + var->right_margin; |
| |
| vbps = var->vsync_len; |
| vas = vbps + var->upper_margin; |
| vfps = vas + var->yres; |
| vt = vfps + var->lower_margin; |
| |
| write_reg_dly((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01); |
| write_reg_dly((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02); |
| write_reg_dly((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03); |
| write_reg_dly((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET); |
| |
| write_reg_dly((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01); |
| write_reg_dly((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02); |
| write_reg_dly((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03); |
| write_reg_dly((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET); |
| write_reg_dly((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL); |
| |
| write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL); |
| |
| write_reg_dly(DINTRE_VEVENT0_EN, DINTRE); |
| |
| return 0; |
| } |
| |
| static int mbxfb_blank(int blank, struct fb_info *info) |
| { |
| switch (blank) { |
| case FB_BLANK_POWERDOWN: |
| case FB_BLANK_VSYNC_SUSPEND: |
| case FB_BLANK_HSYNC_SUSPEND: |
| case FB_BLANK_NORMAL: |
| write_reg_dly((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL); |
| write_reg_dly((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK); |
| write_reg_dly((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK); |
| break; |
| case FB_BLANK_UNBLANK: |
| write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL); |
| write_reg_dly((readl(PIXCLK) | PIXCLK_EN), PIXCLK); |
| break; |
| } |
| return 0; |
| } |
| |
| static int mbxfb_setupOverlay(struct mbxfb_overlaySetup *set) |
| { |
| u32 vsctrl, vscadr, vsadr; |
| u32 sssize, spoctrl, shctrl; |
| u32 vubase, vvbase; |
| u32 vovrclk; |
| |
| if (set->scaled_width==0 || set->scaled_height==0) |
| return -EINVAL; |
| |
| /* read registers which have reserved bits |
| * so we can write them back as-is. */ |
| vovrclk = readl(VOVRCLK); |
| vsctrl = readl(VSCTRL); |
| vscadr = readl(VSCADR); |
| vubase = readl(VUBASE); |
| vvbase = readl(VVBASE); |
| shctrl = readl(SHCTRL); |
| |
| spoctrl = readl(SPOCTRL); |
| sssize = readl(SSSIZE); |
| |
| vsctrl &= ~( FMsk(VSCTRL_VSWIDTH) | |
| FMsk(VSCTRL_VSHEIGHT) | |
| FMsk(VSCTRL_VPIXFMT) | |
| VSCTRL_GAMMA_EN | VSCTRL_CSC_EN | |
| VSCTRL_COSITED ); |
| vsctrl |= Vsctrl_Width(set->width) | Vsctrl_Height(set->height) | |
| VSCTRL_CSC_EN; |
| |
| vscadr &= ~(VSCADR_STR_EN | FMsk(VSCADR_VBASE_ADR) ); |
| vubase &= ~(VUBASE_UVHALFSTR | FMsk(VUBASE_UBASE_ADR)); |
| vvbase &= ~(FMsk(VVBASE_VBASE_ADR)); |
| |
| switch (set->fmt) { |
| case MBXFB_FMT_YUV16: |
| vsctrl |= VSCTRL_VPIXFMT_YUV12; |
| |
| set->Y_stride = ((set->width) + 0xf ) & ~0xf; |
| break; |
| case MBXFB_FMT_YUV12: |
| vsctrl |= VSCTRL_VPIXFMT_YUV12; |
| |
| set->Y_stride = ((set->width) + 0xf ) & ~0xf; |
| vubase |= VUBASE_UVHALFSTR; |
| |
| break; |
| case MBXFB_FMT_UY0VY1: |
| vsctrl |= VSCTRL_VPIXFMT_UY0VY1; |
| set->Y_stride = (set->width*2 + 0xf ) & ~0xf; |
| break; |
| case MBXFB_FMT_VY0UY1: |
| vsctrl |= VSCTRL_VPIXFMT_VY0UY1; |
| set->Y_stride = (set->width*2 + 0xf ) & ~0xf; |
| break; |
| case MBXFB_FMT_Y0UY1V: |
| vsctrl |= VSCTRL_VPIXFMT_Y0UY1V; |
| set->Y_stride = (set->width*2 + 0xf ) & ~0xf; |
| break; |
| case MBXFB_FMT_Y0VY1U: |
| vsctrl |= VSCTRL_VPIXFMT_Y0VY1U; |
| set->Y_stride = (set->width*2 + 0xf ) & ~0xf; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* VSCTRL has the bits which sets the Video Pixel Format. |
| * When passing from a packed to planar format, |
| * if we write VSCTRL first, VVBASE and VUBASE would |
| * be zero if we would not set them here. (And then, |
| * the chips hangs and only a reset seems to fix it). |
| * |
| * If course, the values calculated here have no meaning |
| * for packed formats. |
| */ |
| set->UV_stride = ((set->width/2) + 0x7 ) & ~0x7; |
| set->U_offset = set->height * set->Y_stride; |
| set->V_offset = set->U_offset + |
| set->height * set->UV_stride; |
| vubase |= Vubase_Ubase_Adr( |
| (0x60000 + set->mem_offset + set->U_offset)>>3); |
| vvbase |= Vvbase_Vbase_Adr( |
| (0x60000 + set->mem_offset + set->V_offset)>>3); |
| |
| |
| vscadr |= Vscadr_Vbase_Adr((0x60000 + set->mem_offset)>>4); |
| |
| if (set->enable) |
| vscadr |= VSCADR_STR_EN; |
| |
| |
| vsadr = Vsadr_Srcstride((set->Y_stride)/16-1) | |
| Vsadr_Xstart(set->x) | Vsadr_Ystart(set->y); |
| |
| sssize &= ~(FMsk(SSSIZE_SC_WIDTH) | FMsk(SSSIZE_SC_HEIGHT)); |
| sssize = Sssize_Sc_Width(set->scaled_width-1) | |
| Sssize_Sc_Height(set->scaled_height-1); |
| |
| spoctrl &= ~(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP | |
| SPOCTRL_HV_SC_OR | SPOCTRL_VS_UR_C | |
| FMsk(SPOCTRL_VPITCH)); |
| spoctrl |= Spoctrl_Vpitch((set->height<<11)/set->scaled_height); |
| |
| /* Bypass horiz/vert scaler when same size */ |
| if (set->scaled_width == set->width) |
| spoctrl |= SPOCTRL_H_SC_BP; |
| if (set->scaled_height == set->height) |
| spoctrl |= SPOCTRL_V_SC_BP; |
| |
| shctrl &= ~(FMsk(SHCTRL_HPITCH) | SHCTRL_HDECIM); |
| shctrl |= Shctrl_Hpitch((set->width<<11)/set->scaled_width); |
| |
| /* Video plane registers */ |
| write_reg(vsctrl, VSCTRL); |
| write_reg(vscadr, VSCADR); |
| write_reg(vubase, VUBASE); |
| write_reg(vvbase, VVBASE); |
| write_reg(vsadr, VSADR); |
| |
| /* Video scaler registers */ |
| write_reg(sssize, SSSIZE); |
| write_reg(spoctrl, SPOCTRL); |
| write_reg(shctrl, SHCTRL); |
| |
| /* Clock */ |
| if (set->enable) |
| vovrclk |= 1; |
| else |
| vovrclk &= ~1; |
| |
| write_reg(vovrclk, VOVRCLK); |
| |
| return 0; |
| } |
| |
| static int mbxfb_ioctl_planeorder(struct mbxfb_planeorder *porder) |
| { |
| unsigned long gscadr, vscadr; |
| |
| if (porder->bottom == porder->top) |
| return -EINVAL; |
| |
| gscadr = readl(GSCADR); |
| vscadr = readl(VSCADR); |
| |
| gscadr &= ~(FMsk(GSCADR_BLEND_POS)); |
| vscadr &= ~(FMsk(VSCADR_BLEND_POS)); |
| |
| switch (porder->bottom) { |
| case MBXFB_PLANE_GRAPHICS: |
| gscadr |= GSCADR_BLEND_GFX; |
| break; |
| case MBXFB_PLANE_VIDEO: |
| vscadr |= VSCADR_BLEND_GFX; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (porder->top) { |
| case MBXFB_PLANE_GRAPHICS: |
| gscadr |= GSCADR_BLEND_VID; |
| break; |
| case MBXFB_PLANE_VIDEO: |
| vscadr |= GSCADR_BLEND_VID; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| write_reg_dly(vscadr, VSCADR); |
| write_reg_dly(gscadr, GSCADR); |
| |
| return 0; |
| |
| } |
| |
| static int mbxfb_ioctl_alphactl(struct mbxfb_alphaCtl *alpha) |
| { |
| unsigned long vscadr, vbbase, vcmsk; |
| unsigned long gscadr, gbbase, gdrctrl; |
| |
| vbbase = Vbbase_Glalpha(alpha->overlay_global_alpha) | |
| Vbbase_Colkey(alpha->overlay_colorkey); |
| |
| gbbase = Gbbase_Glalpha(alpha->graphics_global_alpha) | |
| Gbbase_Colkey(alpha->graphics_colorkey); |
| |
| vcmsk = readl(VCMSK); |
| vcmsk &= ~(FMsk(VCMSK_COLKEY_M)); |
| vcmsk |= Vcmsk_colkey_m(alpha->overlay_colorkey_mask); |
| |
| gdrctrl = readl(GDRCTRL); |
| gdrctrl &= ~(FMsk(GDRCTRL_COLKEYM)); |
| gdrctrl |= Gdrctrl_Colkeym(alpha->graphics_colorkey_mask); |
| |
| vscadr = readl(VSCADR); |
| vscadr &= ~(FMsk(VSCADR_BLEND_M) | VSCADR_COLKEYSRC | VSCADR_COLKEY_EN); |
| |
| gscadr = readl(GSCADR); |
| gscadr &= ~(FMsk(GSCADR_BLEND_M) | GSCADR_COLKEY_EN | GSCADR_COLKEYSRC); |
| |
| switch (alpha->overlay_colorkey_mode) { |
| case MBXFB_COLORKEY_DISABLED: |
| break; |
| case MBXFB_COLORKEY_PREVIOUS: |
| vscadr |= VSCADR_COLKEY_EN; |
| break; |
| case MBXFB_COLORKEY_CURRENT: |
| vscadr |= VSCADR_COLKEY_EN | VSCADR_COLKEYSRC; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (alpha->overlay_blend_mode) { |
| case MBXFB_ALPHABLEND_NONE: |
| vscadr |= VSCADR_BLEND_NONE; |
| break; |
| case MBXFB_ALPHABLEND_GLOBAL: |
| vscadr |= VSCADR_BLEND_GLOB; |
| break; |
| case MBXFB_ALPHABLEND_PIXEL: |
| vscadr |= VSCADR_BLEND_PIX; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (alpha->graphics_colorkey_mode) { |
| case MBXFB_COLORKEY_DISABLED: |
| break; |
| case MBXFB_COLORKEY_PREVIOUS: |
| gscadr |= GSCADR_COLKEY_EN; |
| break; |
| case MBXFB_COLORKEY_CURRENT: |
| gscadr |= GSCADR_COLKEY_EN | GSCADR_COLKEYSRC; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (alpha->graphics_blend_mode) { |
| case MBXFB_ALPHABLEND_NONE: |
| gscadr |= GSCADR_BLEND_NONE; |
| break; |
| case MBXFB_ALPHABLEND_GLOBAL: |
| gscadr |= GSCADR_BLEND_GLOB; |
| break; |
| case MBXFB_ALPHABLEND_PIXEL: |
| gscadr |= GSCADR_BLEND_PIX; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| write_reg_dly(vbbase, VBBASE); |
| write_reg_dly(gbbase, GBBASE); |
| write_reg_dly(vcmsk, VCMSK); |
| write_reg_dly(gdrctrl, GDRCTRL); |
| write_reg_dly(gscadr, GSCADR); |
| write_reg_dly(vscadr, VSCADR); |
| |
| return 0; |
| } |
| |
| static int mbxfb_ioctl(struct fb_info *info, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct mbxfb_overlaySetup setup; |
| struct mbxfb_planeorder porder; |
| struct mbxfb_alphaCtl alpha; |
| struct mbxfb_reg reg; |
| int res; |
| __u32 tmp; |
| |
| switch (cmd) |
| { |
| case MBXFB_IOCX_OVERLAY: |
| if (copy_from_user(&setup, (void __user*)arg, |
| sizeof(struct mbxfb_overlaySetup))) |
| return -EFAULT; |
| |
| res = mbxfb_setupOverlay(&setup); |
| if (res) |
| return res; |
| |
| if (copy_to_user((void __user*)arg, &setup, |
| sizeof(struct mbxfb_overlaySetup))) |
| return -EFAULT; |
| |
| return 0; |
| |
| case MBXFB_IOCS_PLANEORDER: |
| if (copy_from_user(&porder, (void __user*)arg, |
| sizeof(struct mbxfb_planeorder))) |
| return -EFAULT; |
| |
| return mbxfb_ioctl_planeorder(&porder); |
| |
| case MBXFB_IOCS_ALPHA: |
| if (copy_from_user(&alpha, (void __user*)arg, |
| sizeof(struct mbxfb_alphaCtl))) |
| return -EFAULT; |
| |
| return mbxfb_ioctl_alphactl(&alpha); |
| |
| case MBXFB_IOCS_REG: |
| if (copy_from_user(®, (void __user*)arg, |
| sizeof(struct mbxfb_reg))) |
| return -EFAULT; |
| |
| if (reg.addr >= 0x10000) /* regs are from 0x3fe0000 to 0x3feffff */ |
| return -EINVAL; |
| |
| tmp = readl(virt_base_2700 + reg.addr); |
| tmp &= ~reg.mask; |
| tmp |= reg.val & reg.mask; |
| writel(tmp, virt_base_2700 + reg.addr); |
| |
| return 0; |
| case MBXFB_IOCX_REG: |
| if (copy_from_user(®, (void __user*)arg, |
| sizeof(struct mbxfb_reg))) |
| return -EFAULT; |
| |
| if (reg.addr >= 0x10000) /* regs are from 0x3fe0000 to 0x3feffff */ |
| return -EINVAL; |
| reg.val = readl(virt_base_2700 + reg.addr); |
| |
| if (copy_to_user((void __user*)arg, ®, |
| sizeof(struct mbxfb_reg))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static struct fb_ops mbxfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = mbxfb_check_var, |
| .fb_set_par = mbxfb_set_par, |
| .fb_setcolreg = mbxfb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_blank = mbxfb_blank, |
| .fb_ioctl = mbxfb_ioctl, |
| }; |
| |
| /* |
| Enable external SDRAM controller. Assume that all clocks are active |
| by now. |
| */ |
| static void setup_memc(struct fb_info *fbi) |
| { |
| unsigned long tmp; |
| int i; |
| |
| /* FIXME: use platform specific parameters */ |
| /* setup SDRAM controller */ |
| write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS | |
| LMCFG_LMA_TS), |
| LMCFG); |
| |
| write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR); |
| |
| /* setup SDRAM timings */ |
| write_reg_dly((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) | |
| Lmtim_Trc(9) | Lmtim_Tdpl(2)), |
| LMTIM); |
| /* setup SDRAM refresh rate */ |
| write_reg_dly(0xc2b, LMREFRESH); |
| /* setup SDRAM type parameters */ |
| write_reg_dly((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 | |
| LMTYPE_COLSZ_8), |
| LMTYPE); |
| /* enable memory controller */ |
| write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR); |
| /* perform dummy reads */ |
| for ( i = 0; i < 16; i++ ) { |
| tmp = readl(fbi->screen_base); |
| } |
| } |
| |
| static void enable_clocks(struct fb_info *fbi) |
| { |
| /* enable clocks */ |
| write_reg_dly(SYSCLKSRC_PLL_2, SYSCLKSRC); |
| write_reg_dly(PIXCLKSRC_PLL_1, PIXCLKSRC); |
| write_reg_dly(0x00000000, CLKSLEEP); |
| |
| /* PLL output = (Frefclk * M) / (N * 2^P ) |
| * |
| * M: 0x17, N: 0x3, P: 0x0 == 100 Mhz! |
| * M: 0xb, N: 0x1, P: 0x1 == 71 Mhz |
| * */ |
| write_reg_dly((Core_Pll_M(0xb) | Core_Pll_N(0x1) | Core_Pll_P(0x1) | |
| CORE_PLL_EN), |
| COREPLL); |
| |
| write_reg_dly((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) | |
| DISP_PLL_EN), |
| DISPPLL); |
| |
| write_reg_dly(0x00000000, VOVRCLK); |
| write_reg_dly(PIXCLK_EN, PIXCLK); |
| write_reg_dly(MEMCLK_EN, MEMCLK); |
| write_reg_dly(0x00000001, M24CLK); |
| write_reg_dly(0x00000001, MBXCLK); |
| write_reg_dly(SDCLK_EN, SDCLK); |
| write_reg_dly(0x00000001, PIXCLKDIV); |
| } |
| |
| static void setup_graphics(struct fb_info *fbi) |
| { |
| unsigned long gsctrl; |
| unsigned long vscadr; |
| |
| gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres) | |
| Gsctrl_Height(fbi->var.yres); |
| switch (fbi->var.bits_per_pixel) { |
| case 16: |
| if (fbi->var.green.length == 5) |
| gsctrl |= GSCTRL_GPIXFMT_ARGB1555; |
| else |
| gsctrl |= GSCTRL_GPIXFMT_RGB565; |
| break; |
| case 24: |
| gsctrl |= GSCTRL_GPIXFMT_RGB888; |
| break; |
| case 32: |
| gsctrl |= GSCTRL_GPIXFMT_ARGB8888; |
| break; |
| } |
| |
| write_reg_dly(gsctrl, GSCTRL); |
| write_reg_dly(0x00000000, GBBASE); |
| write_reg_dly(0x00ffffff, GDRCTRL); |
| write_reg_dly((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR); |
| write_reg_dly(0x00000000, GPLUT); |
| |
| vscadr = readl(VSCADR); |
| vscadr &= ~(FMsk(VSCADR_BLEND_POS) | FMsk(VSCADR_BLEND_M)); |
| vscadr |= VSCADR_BLEND_VID | VSCADR_BLEND_NONE; |
| write_reg_dly(vscadr, VSCADR); |
| } |
| |
| static void setup_display(struct fb_info *fbi) |
| { |
| unsigned long dsctrl = 0; |
| |
| dsctrl = DSCTRL_BLNK_POL; |
| if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) |
| dsctrl |= DSCTRL_HS_POL; |
| if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) |
| dsctrl |= DSCTRL_VS_POL; |
| write_reg_dly(dsctrl, DSCTRL); |
| write_reg_dly(0xd0303010, DMCTRL); |
| write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL); |
| } |
| |
| static void enable_controller(struct fb_info *fbi) |
| { |
| u32 svctrl, shctrl; |
| |
| write_reg_dly(SYSRST_RST, SYSRST); |
| |
| /* setup a timeout, raise drive strength */ |
| write_reg_dly(0xffffff0c, SYSCFG); |
| |
| enable_clocks(fbi); |
| setup_memc(fbi); |
| setup_graphics(fbi); |
| setup_display(fbi); |
| |
| shctrl = readl(SHCTRL); |
| shctrl &= ~(FMsk(SHCTRL_HINITIAL)); |
| shctrl |= Shctrl_Hinitial(4<<11); |
| writel(shctrl, SHCTRL); |
| |
| svctrl = Svctrl_Initial1(1<<10) | Svctrl_Initial2(1<<10); |
| writel(svctrl, SVCTRL); |
| |
| writel(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP | SPOCTRL_VORDER_4TAP |
| , SPOCTRL); |
| |
| /* Those coefficients are good for scaling up. For scaling |
| * down, the application has to calculate them. */ |
| write_reg(0xff000100, VSCOEFF0); |
| write_reg(0xfdfcfdfe, VSCOEFF1); |
| write_reg(0x170d0500, VSCOEFF2); |
| write_reg(0x3d372d22, VSCOEFF3); |
| write_reg(0x00000040, VSCOEFF4); |
| |
| write_reg(0xff010100, HSCOEFF0); |
| write_reg(0x00000000, HSCOEFF1); |
| write_reg(0x02010000, HSCOEFF2); |
| write_reg(0x01020302, HSCOEFF3); |
| write_reg(0xf9fbfe00, HSCOEFF4); |
| write_reg(0xfbf7f6f7, HSCOEFF5); |
| write_reg(0x1c110700, HSCOEFF6); |
| write_reg(0x3e393127, HSCOEFF7); |
| write_reg(0x00000040, HSCOEFF8); |
| |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * Power management hooks. Note that we won't be called from IRQ context, |
| * unlike the blank functions above, so we may sleep. |
| */ |
| static int mbxfb_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| /* make frame buffer memory enter self-refresh mode */ |
| write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR); |
| while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM) |
| ; /* empty statement */ |
| |
| /* reset the device, since it's initial state is 'mostly sleeping' */ |
| write_reg_dly(SYSRST_RST, SYSRST); |
| return 0; |
| } |
| |
| static int mbxfb_resume(struct platform_device *dev) |
| { |
| struct fb_info *fbi = platform_get_drvdata(dev); |
| |
| enable_clocks(fbi); |
| /* setup_graphics(fbi); */ |
| /* setup_display(fbi); */ |
| |
| write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL); |
| return 0; |
| } |
| #else |
| #define mbxfb_suspend NULL |
| #define mbxfb_resume NULL |
| #endif |
| |
| /* debugfs entries */ |
| #ifndef CONFIG_FB_MBX_DEBUG |
| #define mbxfb_debugfs_init(x) do {} while(0) |
| #define mbxfb_debugfs_remove(x) do {} while(0) |
| #else |
| #include "mbxdebugfs.c" |
| #endif |
| |
| #define res_size(_r) (((_r)->end - (_r)->start) + 1) |
| |
| static int mbxfb_probe(struct platform_device *dev) |
| { |
| int ret; |
| struct fb_info *fbi; |
| struct mbxfb_info *mfbi; |
| struct mbxfb_platform_data *pdata; |
| |
| dev_dbg(&dev->dev, "mbxfb_probe\n"); |
| |
| pdata = dev_get_platdata(&dev->dev); |
| if (!pdata) { |
| dev_err(&dev->dev, "platform data is required\n"); |
| return -EINVAL; |
| } |
| |
| fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev); |
| if (!fbi) |
| return -ENOMEM; |
| |
| mfbi = fbi->par; |
| fbi->pseudo_palette = mfbi->pseudo_palette; |
| |
| |
| if (pdata->probe) |
| mfbi->platform_probe = pdata->probe; |
| if (pdata->remove) |
| mfbi->platform_remove = pdata->remove; |
| |
| mfbi->fb_res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| mfbi->reg_res = platform_get_resource(dev, IORESOURCE_MEM, 1); |
| |
| if (!mfbi->fb_res || !mfbi->reg_res) { |
| dev_err(&dev->dev, "no resources found\n"); |
| ret = -ENODEV; |
| goto err1; |
| } |
| |
| mfbi->fb_req = request_mem_region(mfbi->fb_res->start, |
| res_size(mfbi->fb_res), dev->name); |
| if (mfbi->fb_req == NULL) { |
| dev_err(&dev->dev, "failed to claim framebuffer memory\n"); |
| ret = -EINVAL; |
| goto err1; |
| } |
| mfbi->fb_phys_addr = mfbi->fb_res->start; |
| |
| mfbi->reg_req = request_mem_region(mfbi->reg_res->start, |
| res_size(mfbi->reg_res), dev->name); |
| if (mfbi->reg_req == NULL) { |
| dev_err(&dev->dev, "failed to claim Marathon registers\n"); |
| ret = -EINVAL; |
| goto err2; |
| } |
| mfbi->reg_phys_addr = mfbi->reg_res->start; |
| |
| mfbi->reg_virt_addr = devm_ioremap_nocache(&dev->dev, |
| mfbi->reg_phys_addr, |
| res_size(mfbi->reg_req)); |
| if (!mfbi->reg_virt_addr) { |
| dev_err(&dev->dev, "failed to ioremap Marathon registers\n"); |
| ret = -EINVAL; |
| goto err3; |
| } |
| virt_base_2700 = mfbi->reg_virt_addr; |
| |
| mfbi->fb_virt_addr = devm_ioremap_nocache(&dev->dev, mfbi->fb_phys_addr, |
| res_size(mfbi->fb_req)); |
| if (!mfbi->fb_virt_addr) { |
| dev_err(&dev->dev, "failed to ioremap frame buffer\n"); |
| ret = -EINVAL; |
| goto err3; |
| } |
| |
| fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000); |
| fbi->screen_size = pdata->memsize; |
| fbi->fbops = &mbxfb_ops; |
| |
| fbi->var = mbxfb_default; |
| fbi->fix = mbxfb_fix; |
| fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000; |
| fbi->fix.smem_len = pdata->memsize; |
| fbi->fix.line_length = mbxfb_default.xres_virtual * |
| mbxfb_default.bits_per_pixel / 8; |
| |
| ret = fb_alloc_cmap(&fbi->cmap, 256, 0); |
| if (ret < 0) { |
| dev_err(&dev->dev, "fb_alloc_cmap failed\n"); |
| ret = -EINVAL; |
| goto err3; |
| } |
| |
| platform_set_drvdata(dev, fbi); |
| |
| fb_info(fbi, "mbx frame buffer device\n"); |
| |
| if (mfbi->platform_probe) |
| mfbi->platform_probe(fbi); |
| |
| enable_controller(fbi); |
| |
| mbxfb_debugfs_init(fbi); |
| |
| ret = register_framebuffer(fbi); |
| if (ret < 0) { |
| dev_err(&dev->dev, "register_framebuffer failed\n"); |
| ret = -EINVAL; |
| goto err6; |
| } |
| |
| return 0; |
| |
| err6: |
| fb_dealloc_cmap(&fbi->cmap); |
| err3: |
| release_mem_region(mfbi->reg_res->start, res_size(mfbi->reg_res)); |
| err2: |
| release_mem_region(mfbi->fb_res->start, res_size(mfbi->fb_res)); |
| err1: |
| framebuffer_release(fbi); |
| |
| return ret; |
| } |
| |
| static int mbxfb_remove(struct platform_device *dev) |
| { |
| struct fb_info *fbi = platform_get_drvdata(dev); |
| |
| write_reg_dly(SYSRST_RST, SYSRST); |
| |
| mbxfb_debugfs_remove(fbi); |
| |
| if (fbi) { |
| struct mbxfb_info *mfbi = fbi->par; |
| |
| unregister_framebuffer(fbi); |
| if (mfbi) { |
| if (mfbi->platform_remove) |
| mfbi->platform_remove(fbi); |
| |
| |
| if (mfbi->reg_req) |
| release_mem_region(mfbi->reg_req->start, |
| res_size(mfbi->reg_req)); |
| if (mfbi->fb_req) |
| release_mem_region(mfbi->fb_req->start, |
| res_size(mfbi->fb_req)); |
| } |
| framebuffer_release(fbi); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver mbxfb_driver = { |
| .probe = mbxfb_probe, |
| .remove = mbxfb_remove, |
| .suspend = mbxfb_suspend, |
| .resume = mbxfb_resume, |
| .driver = { |
| .name = "mbx-fb", |
| }, |
| }; |
| |
| module_platform_driver(mbxfb_driver); |
| |
| MODULE_DESCRIPTION("loadable framebuffer driver for Marathon device"); |
| MODULE_AUTHOR("Mike Rapoport, Compulab"); |
| MODULE_LICENSE("GPL"); |